Related
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Comple
I tried try another one stock rom for my phone,then it gived this error and phone semi bricked '' computer logo on screen and say about recover with kies)
then i tried 3 diffrent firmware also diffrent pcies but everytime give error in same step.. system.img then fail.
Whats wrong with me
ITs n900 model
no any1 _
May be the firmware being flashed is not for your phone's region. So may be you need the correct PIT file.
Or try to flash the correct firmware for your phone's region.
Btw what is your phone's region? what was the original firmware (version) before flashing and what is the rom being flashed?
vndnguyen said:
May be the firmware being flashed is not for your phone's region. So may be you need the correct PIT file.
Or try to flash the correct firmware for your phone's region.
Btw what is your phone's region? what was the original firmware (version) before flashing and what is the rom being flashed?
Click to expand...
Click to collapse
lol thats to problem..I didint know there was region problems in note 3 and i did flash randomly a rom..Then its bricked and cant find any rom for my phone i already tried 7 diffrent random firmware..And i dont know where i can pit file its says n900 32 gb in back sticker but not found any pit file for this model.
vhd99 said:
lol thats to problem..I didint know there was region problems in note 3 and i did flash randomly a rom..Then its bricked and cant find any rom for my phone i already tried 7 diffrent random firmware..And i dont know where i can pit file its says n900 32 gb in back sticker but not found any pit file for this model.
Click to expand...
Click to collapse
try to look in the box of the phone.
there should be the information about the country for which the phone was produced.
if you cannot find out, post some pics of the box (6 sides) and i will try to figure out.
Maybe trying to downgrade firmware rather than going up? - try the latest firmware available.
Or reactivation lock was on?
There are a few PIT files around which should sort you out once you have it.
Sent from my SM-N9005 using XDA Premium 4 mobile app
I'm trying to flash an updated modem on my i337M which is running a custom DANDVH-GE-4.4.2-01162014-INTNL-STOCK.ZIP which is a Google Play work alike. I am trying to change the modem because it keeps droping the data connection and will only stay stable in 2G mode. Right now its modem is on AMDJ. I've tried to flash both the XXUEMKF, XXUFNA1, modems but I keep getting the following error:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1
I'm adding the modem.bin to the CP portion of Odin 3.09. I've tried doing this on all my USB ports using two new cables (all w/ the updated samsung drivers). I am using Win 8.1. All the same results. My phone says:
Code:
Odin Mode
Product name: SGH-I337M
Current Binary: Samsung Official
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Then when I start flashing the following to messages appear right under the write protection message:
Code:
Start [224, 1440]
Secure Check Fail: mdm
After doing this I have to restart the phone for odin to pick it up again. It boots fine normally, and the original AMDJ modem still shows.
What's going on with this? I've looked in our forums but I can't find anything. I have TWRP installed, and I am rooted.
AHLASSICH said:
I'm trying to flash an updated modem on my i337M which is running a custom DANDVH-GE-4.4.2-01162014-INTNL-STOCK.ZIP which is a Google Play work alike. I am trying to change the modem because it keeps droping the data connection and will only stay stable in 2G mode. Right now its modem is on AMDJ. I've tried to flash both the XXUEMKF, XXUFNA1, modems but I keep getting the following error:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1
I'm adding the modem.bin to the CP portion of Odin 3.09. I've tried doing this on all my USB ports using two new cables (all w/ the updated samsung drivers). I am using Win 8.1. All the same results. My phone says:
Code:
Odin Mode
Product name: SGH-I337M
Current Binary: Samsung Official
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Then when I start flashing the following to messages appear right under the write protection message:
Code:
Start [224, 1440]
Secure Check Fail: mdm
After doing this I have to restart the phone for odin to pick it up again. It boots fine normally, and the original AMDJ modem still shows.
What's going on with this? I've looked in our forums but I can't find anything. I have TWRP installed, and I am rooted.
Click to expand...
Click to collapse
Hey there, I'm trying to update my I337M's modem as well (I have a post in this forum) so I'm in the same boat as you. From the looks of it, it seems like you're not using the correct modem firmware. If you'd want to update I believe it's something like UMUEMK6 for our phones, I've tried looking around and I can't find it anywhere. Hopefully that offers some direction but I'm waiting to see as well since I'm having the same problem with Google ROMs as well (The data signal never works).
Hello once again,
After a bit of work, I managed to update the modem on my phone to MUMUEMK6 (which is the newest baseband version for the I337M). Since flashing the modem firmware, I've re-installed Danvdh-GE-4.4.2-01232014b.zip and I haven't had a problem since, works without a hitch. What you need is this file which I've RARd up for you :
(Sorry, I have to obfuscate the URL since I'm a new user on these forums, just replace *dot* with a dot)
rtigue *dot* ca/files/SGH-I337M_MK6 *dot* rar
Once you've downloaded the file, simply just boot your phone in ODIN mode, open up ODIN, add the 'modem.bin' to the Phone section in ODIN and click Start. Wait a few moments and after that you should be good to go.
Let me know if anything comes up
For some reason, yours is the only version of the mk6 modem file that worked for my i337m after I was on 4.3 GE and went to old MDJ modem to try sim unlock. Which didn't work, sigh... Thanks!
SimonPalmieri said:
Hello once again,
After a bit of work, I managed to update the modem on my phone to MUMUEMK6 (which is the newest baseband version for the I337M). Since flashing the modem firmware, I've re-installed Danvdh-GE-4.4.2-01232014b.zip and I haven't had a problem since, works without a hitch. What you need is this file which I've RARd up for you :
(Sorry, I have to obfuscate the URL since I'm a new user on these forums, just replace *dot* with a dot)
rtigue *dot* ca/files/SGH-I337M_MK6 *dot* rar
Once you've downloaded the file, simply just boot your phone in ODIN mode, open up ODIN, add the 'modem.bin' to the Phone section in ODIN and click Start. Wait a few moments and after that you should be good to go.
Let me know if anything comes up
Click to expand...
Click to collapse
@ SimonPalmieri
Hello. I'm also running a rooted i337m (Bell) with 4.2.2 i337mvluamg1 stock rom.
Please let me know if the new modem MUMUEMK6 changes the bootloader with KNOX integrated.
Thanks.
jk2rd said:
@ SimonPalmieri
Hello. I'm also running a rooted i337m (Bell) with 4.2.2 i337mvluamg1 stock rom.
Please let me know if the new modem MUMUEMK6 changes the bootloader with KNOX integrated.
Thanks.
Click to expand...
Click to collapse
Bootloader and modem are not tied together..... MK6 is the latest modem and works with 4.4.2 roms (for I337M), once the actual 4.4.2 update drops for i337m we will be able to update to that modem.
Thanks for replying Gage_Hero.
So I'm then assuming that it's NOT a good idea to flash the mk6 modem.bin on my current rom?
MK6
jk2rd said:
Thanks for replying Gage_Hero.
So I'm then assuming that it's NOT a good idea to flash the mk6 modem.bin on my current rom?
Click to expand...
Click to collapse
First you need to decide if you want to sim unlock the phone, still possible on mvluamg1, not possible on MK6. I would make sure you have a copy of modem.bin for mvluamg1 first, just incase. Then flash the MK6, I run MK6 on 4.4.2 GErom since we don't have a kitkat modem for i337m yet... once there is I will be updating.....
PS if you can find files that have md5 checksum, that is always good because then you can check the file to make sure it is complete. I had that issue flashing the MK6 modem, first file I downloaded failed in Odin, plus it had no md5 for me to check. Second one I donwloaded had the md5, which I checked and it flashed perfectly....
Hello,
i got a device to repair. I am not so familiar with samsung devices so i would apreciate some advice/help.
I dont know how to flash correctly the n9005 firmware.
I cant go to recovery and when try to boot there is shown on the screen "kernel is not seandroid enforcing, set warranty bit : kernel" and the device is rebooting to this text over and over.
It Is N9005 (is written under the battery).
But when i go to download mode it is listed this:
Code:
Odin Mode
product name: SM-N900P
Current Binary: Samsung Official
System Status: Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
Qulcomm Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A3, P1
Write Protection: Enable
I assume the owner accidentally flashed an n900P firmware to his n9005 device.
I tried many ODIN bversions (3.10.7,3.10.6,3.07,1.85) and stock 5.0, 4.4.2, 4.3 firmwares, various n9005 PIT files
when flashing a stock 4.4.2 firmware (only AP file from sammobile)
Code:
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> SingleDownload.
<ID:0/016> sbl1.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> FAIL! (Auth)
when flashing a stock 5.0 firmware (only AP file from sammobile)
Code:
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL! (Auth)
when flashing a 4.4.? csc file for n9005
Code:
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Re-Partition operation failed]
closest i got with this:
in ODIN 3.07 when flashing kitkat csc file i got
Code:
<ID:0/015> Firmware update start..
<ID:0/015> cache.img.ext4
<ID:0/015> NAND Write Start!!
<ID:0/015> hidden.img.ext4
<ID:0/015> FAIL
and on the device was shown:
Code:
secure check fail : PIT
Set warranty bit : cache
Unsupport dev_type
nobody?
I make a step further.
Now i can flash system (AP) or i can flash twrp recovery or root trough ODIN, but i cant flash the whole stock, because it will fail everytime on sbl1.img, aboot or hidden.image.ext4
So now i can boot the system, but with N900P modem, kernel and othe rpartitions, so wifi dont work ect.
Now it would be superb to have a zip file with stock modem,sbl,aboot,non-hlos to flash it trough TWRP.
please any advice?
Sorry for my English!!
Download your region firmware from sammobile and pit file for your device n9005 note 3 open europ from xda.
Open odin select pit then the rom on itch specific place flash everything...
Let me know if you've got a positive result.
Sent from my SM-N910F using XDA-Developers mobile app
tried this dozen times. It gives me error when Odin tries to write the sbl1 or aboot or modem partition (as i wrote in OP). It gives error because the pit file doesn't match.
Is it possible the phone's motherboard was swapped for a 900p?
don't know... maybe. so you suggest to imstall stock N900P firmware?
https://mega.nz/#!kQtGnCYZ!7jko1XT7fPc9mIGHE8JLZhOvaeGH6qQbaW7Y6RYBQjU
This is a pit file for n9005 Europe
I advice you to reflash the rom of your original specific model with the pit file with wipe partition checked
Let me know wen u did
Sent from my SM-N910F using XDA-Developers mobile app
I will try. I avoided to wipe partitions while users say here on xda that it is a one way ride. ?
Samsung seems to have pretty good security measures in place to prevent flashing incorrect ROMs via Odin.
The failure to flash the 9005 aboot file tells me the bootloader on the rom and the bootloader in the phone do not match.
so how it can be, that i have an n9005 device with n900p Firmware and all partitions?
Does the imei in the phone match the imei on the printed label under the battery?
And why not your device would be a N900P ? Remove battery and see...
Maybe your USB is bad (it happened to me : 4 cables, 3 not working, 1 working hopefully)
Or maybe your downloaded ROM can't been flashed (weird, but it happened also to me), so flash the same model, but other revision (exemple OD3 doesn't work, try with OJ3, in my case)
Good luck !
use kies to install firmware. from kies select tools then "Emergency firmware recovey".
Munawar Mehmood said:
use kies to install firmware. from kies select tools then "Emergency firmware recovey".
Click to expand...
Click to collapse
the kies dont see my device.
cedric3 said:
And why not your device would be a N900P ? Remove battery and see...
Maybe your USB is bad (it happened to me : 4 cables, 3 not working, 1 working hopefully)
Or maybe your downloaded ROM can't been flashed (weird, but it happened also to me), so flash the same model, but other revision (exemple OD3 doesn't work, try with OJ3, in my case)
Good luck !
Click to expand...
Click to collapse
as i wrote under thebbattery is written n9005. usb is good use it to flash other phones. tried to flash about 4 stock roms.
DallasCZ said:
as I wrote, under the battery is written N9005. USB is good : I use it to flash other phones. I tried to flash about 4 stock roms.
Click to expand...
Click to collapse
Install Kies ot SmartSwitch (Kies' replacement)
Go to Emergency
Enter N9005 in device model
Enter the S/N number (written under the battery)
Connect your phone (don't worry if it is not recognized)
Go !
It will download the right update and install it : be patient, don't disconnect the phone or internet...
Good luck
jemis1983 said:
https://mega.nz/#!9BtkxK4A!Gy7muVwEtYBQFtxktDfCFK3VfcMZanfOMdOP9Elrm1U
This is a pit file for n9005 Europe
I advice you to reflash the rom of your original specific model with the pit file with wipe partition checked
Let me know wen u did
Sent from my SM-N910F using XDA-Developers mobile app
Click to expand...
Click to collapse
this is only a bat file to store the pit from the device.There is no pit file inside.
cedric3 said:
Install Kies ot SmartSwitch (Kies' replacement)
Go to Emergency
Enter N9005 in device model
Enter the S/N number (written under the battery)
Connect your phone (don't worry if it is not recognized)
Go !
It will download the right update and install it : be patient, don't disconnect the phone or internet...
Good luck
Click to expand...
Click to collapse
smart switch sys that my device dont support iniciation (after i added the sn number and mobile number.
DallasCZ said:
smart switch sys that my device dont support iniciation (after i added the sn number and mobile number.
Click to expand...
Click to collapse
Ok, and have you found the PIT file for your device ?
cedric3 said:
Ok, and have you found the PIT file for your device ?
Click to expand...
Click to collapse
I have the pit file for N9005 i flashed it using ODIN ..it was all ok
When i try to flash the AP image of stock (that cotains all parts BL,AP,CSC, CP) the flash ends by starting with flashing BL partitions sbl1.img)
When try to flash BL (bootloader) there is error in flashing sbl1.img.
the same goe with CSC and CP images (always show some error in flashing aboot.img and other partitions and ODIN stops.
I can flash AP (the AP that is only the system,recovery,boot) it goes well, the device starts but has some errors (because of missing parts in CSC and CP?.). wifi dont work i see full signal but there is no simcard inserted
Now i can boot the device the imei that is shown in the android systme is other than the imei on the back (under the battery).
I think someone tried to flash a N900P firmware over the N9005.
Now i cant flash the rest of the partitions.
Hi guys, I have an j5 2017 (j530f/DS), and I rooted him, but, when I tried to unroot it, and get to default rom, it gets into a boot loop with the Samsung Galaxy J5 screen, and in the left corner is says "Recovery is not seandroid enforcing"
Did i birck it forever? Can i do something about it?...
Please help me guys... Thanks...
EDIT: I can't get into the Recovery mode, or Download Mode neither
I can't take the battery out, because is unibody tho...
Vol+ & Vol- & Power should force your phone to reboot properly.
Then with Vol- & Home & Power you should be able to enter the download mode.
gooodly said:
Vol+ & Vol- & Power should force your phone to reboot properly.
Then with Vol- & Home & Power you should be able to enter the download mode.
Click to expand...
Click to collapse
Ok, I i tried to install the software again, but i get this an error has occurred while updating the device software use the emergency recovery function in the smart switch PC Software , I didn't found my phone, and can't add by the S/N and phone name. I got into Download mode, and i am trying to install the default firmware, but it stucks at <ID:0/003> meta-data/fota.zip ...
Any solve for this?
Which FW and client program did you use?
There's Samsung Smart Switch which allows to update to the latest firmware or Odin which requires that you download the firmware manually, e.g. from Sammobile. Downgrading to an old version may fail. I could downgrade from Lineage OS (8.x) back to stock ROM (7.1) but I could not downgrade to stock ROM 7.0. Anyhow here flashing failed immediately.
In Odin I selected all 4 files (AP, BL, CP and CSC) and had no issues. Up to now I never heard of a problem with fota.zip, so I have no clue about this issue.
gooodly said:
Which FW and client program did you use?
There's Samsung Smart Switch which allows to update to the latest firmware or Odin which requires that you download the firmware manually, e.g. from Sammobile. Downgrading to an old version may fail. I could downgrade from Lineage OS (8.x) back to stock ROM (7.1) but I could not downgrade to stock ROM 7.0. Anyhow here flashing failed immediately.
In Odin I selected all 4 files (AP, BL, CP and CSC) and had no issues. Up to now I never heard of a problem with fota.zip, so I have no clue about this issue.
Click to expand...
Click to collapse
I got my device to the J530FXXU1AQF5 firmware
I need to update it to J530FXXU2ARA2. *who is the actual stock rom* can i do it whithout getting any problem?
Go into DL mode and flash it (ARA2 = Security Patch Level 2018-01-01) . J530FXXU2ARB3 (Security Patch Level 2018-02-01) is more recent.
As long as you can enter the DL mode flashing will work unless you encounter an hardware error.
gooodly said:
Go into DL mode and flash it (ARA2 = Security Patch Level 2018-01-01) . J530FXXU2ARB3 (Security Patch Level 2018-02-01) is more recent.
As long as you can enter the DL mode flashing will work unless you encounter an hardware error.
Click to expand...
Click to collapse
I tried to install the most recent version but i got an error, and i downloaded this one
EDIT:
<ID:0/004> Odin engine v(ID:3.1205)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What I did wrong?
Bobita said:
What I did wrong?
Click to expand...
Click to collapse
What did you do exactly? From the log file it's obvious that you used Odin.
Did you select AP, BL, CP and CSC in Odin?
Or did you use CSC_Home?
Hey bro download latest twrp available for ur device it should be latest and updated if odin is able to detect ur phone just install the twrp first then u should download the stock firmware u wanna install and boot it from recovery u dont need any odin if u can able to get into recovery u can just install ur stock rom by placing it in ur external storage if ur recovery options work .try this
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
What error do you get on the phones download mode screen?
Sent from my SM-G935FD using Tapatalk
TOmwbb said:
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
Click to expand...
Click to collapse
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
SteveMurphy said:
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Click to expand...
Click to collapse
TOmwbb said:
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
I just download latest firmware now, and when i just put in the csc
I get this
ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 301 M
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 2057)
<OSM> All threads completed. (succeed 0 / failed 1)
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had, go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
SteveMurphy said:
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
Click to expand...
Click to collapse
Will try just now.
My windows 10 installed the driver as SAMSUNG MOBILE USB CDC COMPOSITVE DEVICE is that correct
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
TOmwbb said:
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
Click to expand...
Click to collapse
Just put the twrp file in AP slot of odin and flash.
Sent from my SM-G935FD using Tapatalk
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
TOmwbb said:
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
Click to expand...
Click to collapse
No idea what Simra error is. Twrp should work just fine.
Sent from my SM-G935FD using Tapatalk
Yeah thanks everyone for being so kind to me and trying to help me i think the error they say is fimbriae or something they saying they cant load the firmware on. So i think that could be reason maybe the phone is rooted and they cant even load the software
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Is it possible anyone have a Pit file for SM-G935F South africa vodafone
TOmwbb said:
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Click to expand...
Click to collapse
https://eu.dl.twrp.me/hero2lte/twrp-3.3.0-1-hero2lte.img.tar.html
Flash via odin.
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
TOmwbb said:
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
Click to expand...
Click to collapse
My name is Mustafa not Karachi[emoji23]
I live in karachi.
As for your problem, your binary in locked since odin detected an unauthorized download. I'll let you know one I find a solution.
Sent from my SM-G935FD using Tapatalk
Sorry about that thanks would appreciate it very much thank thanks
Anyone can maybe link me I need to download - G935FXXU2ERG2 XFV South Africa vodafone sammobile free download is currently off would appreacite it
HI Mustafa, I downloaded the stock rom Nougar, i tried flash it my phone says SW REV CHECK FAIL(BOOTLOADER) DEVICE 4 BINARY 2