Related
Hi guys,
Just had a brand new 900I sent to me to replace my old broken 900I and it came with Taiwanese firmware on it so I downloaded the XSA (unbranded Australian) firmware from sammobile and attempted to flash G900IDVU1ANK1_G900IXSA1ANJ2_XSA with odin but I get the following error message:
Code:
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
I've tried flashing 10 or so times and tried the NZ firmware with no luck.
Any ideas?
Before anyone chimes in with silly suggestions which never solve anyone's problems, I've MD5 checked the files and they're fine and I'm using the original Samsung USB cable.
Does anyone have any ideas?
gyrex said:
Hi guys,
Just had a brand new 900I sent to me to replace my old broken 900I and it came with Taiwanese firmware on it so I downloaded the XSA (unbranded Australian) firmware from sammobile and attempted to flash G900IDVU1ANK1_G900IXSA1ANJ2_XSA with odin but I get the following error message:
Code:
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
I've tried flashing 10 or so times and tried the NZ firmware with no luck.
Any ideas?
Click to expand...
Click to collapse
hi! did u fix your phone with this problem? as i too have mine getting an error when flashing with odin! if u have a solution to fix this then pls share with me!
WBR
ReyTech.
hello
Try to flash firmware ,bootloader,end pit file for ur device modell you look for pit file for your modell in xda you have fail in partition ext4
I need help how Change Product Name GT-I9500CHN TO GT-I9500
I try Sboot but on KK version Not working show error when i write sboot
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> sboot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL!
Click to expand...
Click to collapse
and in phone ( SW REV: Invalid Magic String
There is any other sboot file for KK version or other solution thanks in advance
still waiting for solution anyone help me
imeicodes said:
I need help how Change Product Name GT-I9500CHN TO GT-I9500
I try Sboot but on KK version Not working show error when i write sboot
and in phone ( SW REV: Invalid Magic String
There is any other sboot file for KK version or other solution thanks in advance
Click to expand...
Click to collapse
Hi mate,
Not 100% sure what you want to do but as far as i know the only difference between the Chinese version and the international was the PIT , in the Chinese the internal SD is bigger about 11.5gb
If you want to use the non chinese rom you have to change the PIT
Check here.
http://forum.xda-developers.com/showthread.php?t=2265477
Thanks for reply
u read that thread but my firmware version updated on Kitkat 4.4.2
And there is available Sboot to 4.2.2 u have 4.4.2 Sboot Firmware
Code:
Note 6: If you flash I9500 stock firmware for China region, it will flash sboot.bin with it, that leads to have a Chinese bootloader (download mode will be in Chinese language and boot splash name will change). Even if you flash other stock firmware, it will not change the bootloader. So flash "GT-I9500_sboot.tar" (attached) as pda in Odin and it will fix the issue. (works on 4.2.2 firmwares!)
imeicodes said:
Thanks for reply
u read that thread but my firmware version updated on Kitkat 4.4.2
And there is available Sboot to 4.2.2 u have 4.4.2 Sboot Firmware
Code:
Note 6: If you flash I9500 stock firmware for China region, it will flash sboot.bin with it, that leads to have a Chinese bootloader (download mode will be in Chinese language and boot splash name will change). Even if you flash other stock firmware, it will not change the bootloader. So flash "GT-I9500_sboot.tar" (attached) as pda in Odin and it will fix the issue. (works on 4.2.2 firmwares!)
Click to expand...
Click to collapse
Hi,
That is a different case , that is if you wish to keep the old firmware
I would flash the PIT with a the NEW firmware
Note 2: If you have a corrupted partition table (Odin says: "there is no pit partition" or "Re-Partition operation failed"), flash pit file for your device (attached, dont forget to unzip it) (put it in pit window) with your firmware (some users reported that it worked without firmware), in this case "Re-Partition" must be marked.
Select the new firmware plus select PIT on Odin ..so it will flash the new firmware with the already included sboot with the new Partition tables (PIT)
Flash it all together
Hi all, I have rooted my galaxys in the past, but I have ran into a problem with this device, I am now only getting ''firmware upgrade encountered an issue please select recovery mode in kies and try again'', I have tried connecting to Kies, but all I get is an error message. I have tried to flash another rom, but I get error messages aswell, and I just stay stuck in the same place .
I have tried to bring my s5 to a local guy who roots and fixes phones, but he could not solve this. Now Samsung will not touch it, as I have voided the warranty.
Please can someone help me, I don't want to loose €400 of a brand new device if someone can help, I will show my appreciation in some way!! Please people, I am so desperate :crying:
Need to ask Qs in the Q&A forum
http://forum.xda-developers.com/galaxy-s5/help
Go to Sammobile .com and download a stock ROM for your model S5
Use ODIN to flash it while the phone is in download mode
Instructions are under the download on sammobiles site
*Detection* said:
Need to ask Qs in the Q&A forum
http://forum.xda-developers.com/galaxy-s5/help
Go to Sammobile .com and download a stock ROM for your model S5
Use ODIN to flash it while the phone is in download mode
Instructions are under the download on sammobiles site
Click to expand...
Click to collapse
thanks for the reply. I tried this and it didnt work, i will upload the error message later, something about not enough storage?
KennethK1992 said:
thanks for the reply. I tried this and it didnt work, i will upload the error message later, something about not enough storage?
Click to expand...
Click to collapse
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is what i get when i try to flash another rom
Which model S5 is it ?
Choose the correct PIT file for your exact model S5 (Example, mine is the G900F), from here
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
Extract it, and add it to the PIT section in ODIN, at the same time as you add the stock ROM to ODIN, and flash them both at the same time
Not sure if this is what you have tried in kies3, but this is what worked for me before when things have gone wrong and i had nothing but a samsung paper weight:
Go into download mode and do a firmware upgrade and initialisation through kies3. You will need your serial number and model number( on the white sticker behind the battery. in kies3 go tools> firmware upgrade and initialisation, then follow the on screen steps. I used this when I soft bricked my note 2 when I had it, I personally find it's the best way to restore a samsung device.
If you have any issues, try checking for kies3 updates to ensure you have the latest drivers, and if you can get into the stock recovery on your phone, you could try doing a factory data reset and cache wipe which also sometimes helps.
KennethK1992 said:
<OSM> Checking MD5 finished Sucessfully..
this is what i get when i try to flash another rom
Click to expand...
Click to collapse
The suggestion of @*Detection* will definitely work if done properly, but before doing that you can try this:
Extract the hidden.img from the firmware that you're trying to install, and rename it as hidden.img.tar, now open Odin, and load that file on AP and flash it. After turning on the phone wait around 5 minutes and it should boot up.
got the phone back from SBE (Samsung's Irish Partner) with a chip on it should i try kies3 before going with odin?
using kies3, the program keeps telling me ''device is not supported'' :crying:
KennethK1992 said:
using kies3, the program keeps telling me ''device is not supported'' :crying:
Click to expand...
Click to collapse
You should use Smart Switch.
Uzair40 said:
You should use Smart Switch.
Click to expand...
Click to collapse
what is smart switch? can I do any of this with a Mac? or should I stick with a windows?
Smart switch is for WiFi.... nothing to do with flashing ROMs
Use ODIN and PIT file as I posted originally
*Detection* said:
Smart switch is for WiFi.... nothing to do with flashing ROMs
Use ODIN and PIT file as I posted originally
Click to expand...
Click to collapse
Yea figured that downloading ROM now, what file extension should the pit file be when I download it? thanks for your help!
KennethK1992 said:
Yea figured that downloading ROM now, what file extension should the pit file be when I download it? thanks for your help!
Click to expand...
Click to collapse
ROM should be .MD5
PIT should be .PIT
Extract the PIT file and the ROM once downloaded to get the correct files
*Detection* said:
ROM should be .MD5
PIT should be .PIT
Extract the PIT file and the ROM once downloaded to get the correct files
Click to expand...
Click to collapse
just waiting for the ROM to finish downloading...
which version of ODIN do you recommend I use? thanks again!
The one in the instructions under the download on sammobiles site, I think it's 3.10.7
But you should be able to use any from 3.09 > 3.10.7
Newest generally recommended unless it fails, then try an older version
When you add a PIT file, ignore the instructions about re-partition, it needs to be ticked for PIT, it will set itself up automatically once you add the ROM and PIT
My samsung s5 brick while rooting and I'm downloading rom from sam mobile hope it will work and if not i will try smart switch method
Moa z Bourhani said:
My samsung s5 brick while rooting and I'm downloading rom from sam mobile hope it will work and if not i will try smart switch method
Click to expand...
Click to collapse
What smart switch method?
Smart switch is a toggle switch in WiFi settings, to tell the phone to switch between Data and WiFi to keep the best signal
Where are people getting this crap from?
*Detection* said:
What smart switch method?
Smart switch is a toggle switch in WiFi settings, to tell the phone to switch between Data and WiFi to keep the best signal
Where are people getting this crap from?
Click to expand...
Click to collapse
it seems to be an updated version of Kies, didn't work for me.
KIES added a setting with an identical name as a setting in Android?.... smart move
KIES is all but useless anyway, ODIN for updates, TWRP for backups
KIES says it has backed up fine, but trying to restore the backup, restores next to nothing
Hello,
i got a device to repair. I am not so familiar with samsung devices so i would apreciate some advice/help.
I dont know how to flash correctly the n9005 firmware.
I cant go to recovery and when try to boot there is shown on the screen "kernel is not seandroid enforcing, set warranty bit : kernel" and the device is rebooting to this text over and over.
It Is N9005 (is written under the battery).
But when i go to download mode it is listed this:
Code:
Odin Mode
product name: SM-N900P
Current Binary: Samsung Official
System Status: Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
Qulcomm Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A3, P1
Write Protection: Enable
I assume the owner accidentally flashed an n900P firmware to his n9005 device.
I tried many ODIN bversions (3.10.7,3.10.6,3.07,1.85) and stock 5.0, 4.4.2, 4.3 firmwares, various n9005 PIT files
when flashing a stock 4.4.2 firmware (only AP file from sammobile)
Code:
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> SingleDownload.
<ID:0/016> sbl1.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> FAIL! (Auth)
when flashing a stock 5.0 firmware (only AP file from sammobile)
Code:
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL! (Auth)
when flashing a 4.4.? csc file for n9005
Code:
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Re-Partition operation failed]
closest i got with this:
in ODIN 3.07 when flashing kitkat csc file i got
Code:
<ID:0/015> Firmware update start..
<ID:0/015> cache.img.ext4
<ID:0/015> NAND Write Start!!
<ID:0/015> hidden.img.ext4
<ID:0/015> FAIL
and on the device was shown:
Code:
secure check fail : PIT
Set warranty bit : cache
Unsupport dev_type
nobody?
I make a step further.
Now i can flash system (AP) or i can flash twrp recovery or root trough ODIN, but i cant flash the whole stock, because it will fail everytime on sbl1.img, aboot or hidden.image.ext4
So now i can boot the system, but with N900P modem, kernel and othe rpartitions, so wifi dont work ect.
Now it would be superb to have a zip file with stock modem,sbl,aboot,non-hlos to flash it trough TWRP.
please any advice?
Sorry for my English!!
Download your region firmware from sammobile and pit file for your device n9005 note 3 open europ from xda.
Open odin select pit then the rom on itch specific place flash everything...
Let me know if you've got a positive result.
Sent from my SM-N910F using XDA-Developers mobile app
tried this dozen times. It gives me error when Odin tries to write the sbl1 or aboot or modem partition (as i wrote in OP). It gives error because the pit file doesn't match.
Is it possible the phone's motherboard was swapped for a 900p?
don't know... maybe. so you suggest to imstall stock N900P firmware?
https://mega.nz/#!kQtGnCYZ!7jko1XT7fPc9mIGHE8JLZhOvaeGH6qQbaW7Y6RYBQjU
This is a pit file for n9005 Europe
I advice you to reflash the rom of your original specific model with the pit file with wipe partition checked
Let me know wen u did
Sent from my SM-N910F using XDA-Developers mobile app
I will try. I avoided to wipe partitions while users say here on xda that it is a one way ride. ?
Samsung seems to have pretty good security measures in place to prevent flashing incorrect ROMs via Odin.
The failure to flash the 9005 aboot file tells me the bootloader on the rom and the bootloader in the phone do not match.
so how it can be, that i have an n9005 device with n900p Firmware and all partitions?
Does the imei in the phone match the imei on the printed label under the battery?
And why not your device would be a N900P ? Remove battery and see...
Maybe your USB is bad (it happened to me : 4 cables, 3 not working, 1 working hopefully)
Or maybe your downloaded ROM can't been flashed (weird, but it happened also to me), so flash the same model, but other revision (exemple OD3 doesn't work, try with OJ3, in my case)
Good luck !
use kies to install firmware. from kies select tools then "Emergency firmware recovey".
Munawar Mehmood said:
use kies to install firmware. from kies select tools then "Emergency firmware recovey".
Click to expand...
Click to collapse
the kies dont see my device.
cedric3 said:
And why not your device would be a N900P ? Remove battery and see...
Maybe your USB is bad (it happened to me : 4 cables, 3 not working, 1 working hopefully)
Or maybe your downloaded ROM can't been flashed (weird, but it happened also to me), so flash the same model, but other revision (exemple OD3 doesn't work, try with OJ3, in my case)
Good luck !
Click to expand...
Click to collapse
as i wrote under thebbattery is written n9005. usb is good use it to flash other phones. tried to flash about 4 stock roms.
DallasCZ said:
as I wrote, under the battery is written N9005. USB is good : I use it to flash other phones. I tried to flash about 4 stock roms.
Click to expand...
Click to collapse
Install Kies ot SmartSwitch (Kies' replacement)
Go to Emergency
Enter N9005 in device model
Enter the S/N number (written under the battery)
Connect your phone (don't worry if it is not recognized)
Go !
It will download the right update and install it : be patient, don't disconnect the phone or internet...
Good luck
jemis1983 said:
https://mega.nz/#!9BtkxK4A!Gy7muVwEtYBQFtxktDfCFK3VfcMZanfOMdOP9Elrm1U
This is a pit file for n9005 Europe
I advice you to reflash the rom of your original specific model with the pit file with wipe partition checked
Let me know wen u did
Sent from my SM-N910F using XDA-Developers mobile app
Click to expand...
Click to collapse
this is only a bat file to store the pit from the device.There is no pit file inside.
cedric3 said:
Install Kies ot SmartSwitch (Kies' replacement)
Go to Emergency
Enter N9005 in device model
Enter the S/N number (written under the battery)
Connect your phone (don't worry if it is not recognized)
Go !
It will download the right update and install it : be patient, don't disconnect the phone or internet...
Good luck
Click to expand...
Click to collapse
smart switch sys that my device dont support iniciation (after i added the sn number and mobile number.
DallasCZ said:
smart switch sys that my device dont support iniciation (after i added the sn number and mobile number.
Click to expand...
Click to collapse
Ok, and have you found the PIT file for your device ?
cedric3 said:
Ok, and have you found the PIT file for your device ?
Click to expand...
Click to collapse
I have the pit file for N9005 i flashed it using ODIN ..it was all ok
When i try to flash the AP image of stock (that cotains all parts BL,AP,CSC, CP) the flash ends by starting with flashing BL partitions sbl1.img)
When try to flash BL (bootloader) there is error in flashing sbl1.img.
the same goe with CSC and CP images (always show some error in flashing aboot.img and other partitions and ODIN stops.
I can flash AP (the AP that is only the system,recovery,boot) it goes well, the device starts but has some errors (because of missing parts in CSC and CP?.). wifi dont work i see full signal but there is no simcard inserted
Now i can boot the device the imei that is shown in the android systme is other than the imei on the back (under the battery).
I think someone tried to flash a N900P firmware over the N9005.
Now i cant flash the rest of the partitions.
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
What error do you get on the phones download mode screen?
Sent from my SM-G935FD using Tapatalk
TOmwbb said:
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
Click to expand...
Click to collapse
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
SteveMurphy said:
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Click to expand...
Click to collapse
TOmwbb said:
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
I just download latest firmware now, and when i just put in the csc
I get this
ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 301 M
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 2057)
<OSM> All threads completed. (succeed 0 / failed 1)
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had, go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
SteveMurphy said:
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
Click to expand...
Click to collapse
Will try just now.
My windows 10 installed the driver as SAMSUNG MOBILE USB CDC COMPOSITVE DEVICE is that correct
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
TOmwbb said:
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
Click to expand...
Click to collapse
Just put the twrp file in AP slot of odin and flash.
Sent from my SM-G935FD using Tapatalk
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
TOmwbb said:
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
Click to expand...
Click to collapse
No idea what Simra error is. Twrp should work just fine.
Sent from my SM-G935FD using Tapatalk
Yeah thanks everyone for being so kind to me and trying to help me i think the error they say is fimbriae or something they saying they cant load the firmware on. So i think that could be reason maybe the phone is rooted and they cant even load the software
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Is it possible anyone have a Pit file for SM-G935F South africa vodafone
TOmwbb said:
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Click to expand...
Click to collapse
https://eu.dl.twrp.me/hero2lte/twrp-3.3.0-1-hero2lte.img.tar.html
Flash via odin.
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
TOmwbb said:
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
Click to expand...
Click to collapse
My name is Mustafa not Karachi[emoji23]
I live in karachi.
As for your problem, your binary in locked since odin detected an unauthorized download. I'll let you know one I find a solution.
Sent from my SM-G935FD using Tapatalk
Sorry about that thanks would appreciate it very much thank thanks
Anyone can maybe link me I need to download - G935FXXU2ERG2 XFV South Africa vodafone sammobile free download is currently off would appreacite it
HI Mustafa, I downloaded the stock rom Nougar, i tried flash it my phone says SW REV CHECK FAIL(BOOTLOADER) DEVICE 4 BINARY 2