Hello
Samsung Galaxy Grand 2 SM-G7102 , Andriod version 4.4.2
trying to downgrade it to 4.3 Jelly bean using odin and stock firmwares but got FAIL!!
Report in Odin
-------------------------------------------------
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G7102XXUANA1_G7102OJVAML3_G7102XXUAML5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------------------
Message on the phone screen
SW REV CHECK FAIL : sbl1 Fused 2 Binary 1
*********************************************************
Is there fix for this problem ??
I have the same problem. I would like to know also
i also have sameproblem xda developers please help me
munna01 said:
i also have sameproblem xda developers please help me
Click to expand...
Click to collapse
have you rooted youre device yet?
Sent from my SM-G7102 using Tapatalk
u can downgrade only to thailand version of 4.3... check out this video.... https://www.youtube.com/watch?v=6KHuIOxPmsc
i am not responsible for anything happening to your device... do it as ur own risk...
telling
use odin v3.10.6 and in option tab tick nand erase all and phone efs clear and phone bootloader update
untick auto reboot
Yea i downgrade to 4.3 thanks man
Will this video for downgrade work for SM-G7105 as well? Thanks
Sent from my SM-G7105 using Tapatalk
Related
hello - I have S4 9505 and I try to Upgrade Firmware from BTU-I9505XXUDMH8 to new Firmware TGY-I9505ZHUDMH6 and I get an error in odin 3.7 FAIL
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505ZHUDMH6_I9505ZZHDMH6_I9505ZHUDMH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help
after flashing the I9505XXUDMH8 due to new Samsung Shenanigans u can only go UP with upgrade... so u can't install mh7-6-5-4-3- ecc.
U can install only above I9505XXUDMH8 :/
Same problem here
any Solutions ?
just wait for new buildnumber or experimenral downgrade
Sent from my GT-I9505 using Tapatalk 2
There is a new firmware I9505ZHUDMI1 which is released after the MH8 so its a higher version, but this firmware update also fails via ODIN
samsung has absolutely screwed up the S4, lousy knoxx stuff which is a pain to remove manually
any ideas anyone on how we can go back to an old firmware or how do we even udpate so called new firmware
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300IDDUBNI1_I9300IODDBNI1_I9300IXXUBNH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to install last update from SamMobile but this thing keep going i tried 4 different firmwares plz help.
Dude, this update is for i9300i, not for i9301i. Your smartphone is not compatible with the updates that you tried to flash.
Please someone correct me if im wrong.
INeedHack said:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300IDDUBNI1_I9300IODDBNI1_I9300IXXUBNH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to install last update from SamMobile but this thing keep going i tried 4 different firmwares plz help.
Click to expand...
Click to collapse
And what is your model? GT-I9300I or GT-I9301I?
This update is for s3 neo duos GT-I9300I. If you have right mobile. Then may be you have other problems.
Arsal7R said:
And what is your model? GT-I9300I or GT-I9301I?
This update is for s3 neo duos GT-I9300I. If you have right mobile. Then may be you have other problems.
Click to expand...
Click to collapse
i got this from sammobile my phone is s3 neo gt-i9301l not duos , wher can i get a update for this
Arsal7R said:
And what is your model? GT-I9300I or GT-I9301I?
This update is for s3 neo duos GT-I9300I. If you have right mobile. Then may be you have other problems.
Click to expand...
Click to collapse
thnx i founded the solution i think ,
but this s3 neo gt-i9301l when will get a 4.4.4 i´m downloading the firmware because i dislike roms , i will not brick my phone if i install the same version ? and again thnx alot
INeedHack said:
thnx i founded the solution i think ,
but this s3 neo gt-i9301l when will get a 4.4.4 i´m downloading the firmware because i dislike roms , i will not brick my phone if i install the same version ? and again thnx alot
Click to expand...
Click to collapse
No your mobile will not brick by flashing firmware. But it can be if you are careless during the process like you did not connect usb cable properly. GT-I9301I hasn't got any 4.4.4 update. All updates are 4.4.2 and i think 4.4.2 is better than 4.4.4.
INeedHack said:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300IDDUBNI1_I9300IODDBNI1_I9300IXXUBNH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
i tried to install last update from SamMobile but this thing keep going i tried 4 different firmwares plz help.
Click to expand...
Click to collapse
Are you trying to downgrade your firmware? Because it gave the same error when my friend tried to.
xddxd said:
Are you trying to downgrade your firmware? Because it gave the same error when my friend tried to.
Click to expand...
Click to collapse
i fixed it thnx i had the wrong firmware
Arsal7R said:
No your mobile will not brick by flashing firmware. But it can be if you are careless during the process like you did not connect usb cable properly. GT-I9301I hasn't got any 4.4.4 update. All updates are 4.4.2 and i think 4.4.2 is better than 4.4.4.
Click to expand...
Click to collapse
i wanted to insatll ios emoji on my s3 , but emoji switcher didn´t work just 5 of ios emoji-s worked so i thinked to update my phone maybe emoji switcher workes then anyway tthnx
I was rooting the new 5.0.2 update and as i was doing it there a error i think the code was 1 but i am not 100% sure. as soon as i started the odin process and then it froze and i cant get the tablet to go out of Odin mode and i tried flashing the orignal rom and it didnt work.
the processes:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T530NUOVU1BOJ2_T530NUBNN1BOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have no idea why this is happening and i need to get out of odin very fast (because need the info on it)
can someone help please
Hi,
Thanks for using XDA assist.
Your thread will be moved to the Galaxy Tab 4 Q&A, Help & Troubleshooting forum for specialized help. There are experts there who can help you out.
Good Luck! - gsstudios
Your firmware might be corrupted, try redownloading the 4.4.2 version then update it to 5.0.2. I also guess twrp method does not work on 5.x.x firmwares on tab 4
Hi I'm trying to install the stock rom Lolipop 5.1.1 for SM-T330
I'm now in Lolipop 5.1.1 but for SM-T330NU
bUT when i'm flashing with ODIN I got this error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i.imgur.com/34ILBtB.png
I've tried changing the usb cable but I got the same problem , any help please?
addrowmel said:
Hi I'm trying to install the stock rom Lolipop 5.1.1 for SM-T330
I'm now in Lolipop 5.1.1 but for SM-T330NU
bUT when i'm flashing with ODIN I got this error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i.imgur.com/34ILBtB.png
I've tried changing the usb cable but I got the same problem , any help please?
Click to expand...
Click to collapse
Why you trying to flash another's firmware ? You can to flash only your native T330NU firmware .
repey6 said:
Why you trying to flash another's firmware ? You can to flash only your native T330NU firmware .
Click to expand...
Click to collapse
Becauase I prefer that firmware ... so is not possible?
addrowmel said:
Becauase I prefer that firmware ... so is not possible?
Click to expand...
Click to collapse
How you can prefer this firmware if they both is the same ? In T330NU add ir-blaster only , that's all difference .
addrowmel said:
Becauase I prefer that firmware ... so is not possible?
Click to expand...
Click to collapse
No it is not possible
waiting for another answers :good:
addrowmel said:
waiting for another answers :good:
Click to expand...
Click to collapse
Just because it's not the answer you want doesn't make it incorrect. You can't flash an Odin firmware file for one model on a different model. This is a simple fact
addrowmel said:
waiting for another answers :good:
Click to expand...
Click to collapse
you could repack the tar without aboot and sbl and some other, but it doesnt make any sense, delete ir hal and perm. file. but why?
Hi,
I'm Raj from india. I own a Samsung galaxy note 3 N900 exynos model. I flashed the device with Android M-cyanogenmod 13 using "ODIN" due to lots of bugs i disliked that mod. I tired flashing the stock android 5.0 for note 3 N900 but i'm not able to flash and i'm just reaching til this point. Please help me out with this error.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUCMK2_N900ODDCMK1_N900DDUCMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
MY NOTE 3 SCREEN DISPLAYED THIS MESSAGE AFTER TRYING THIS FLASH:
"sw rev check fail device 4 binary 3"
TRIED FLASHING WITH:
N900XXUCMK2_N900ODDCMK1_N900DDUCMK1_HOME.tar.md5
iamsrajchowhan said:
Hi,
I'm Raj from india. I own a Samsung galaxy note 3 N900 exynos model. I flashed the device with Android M-cyanogenmod 13 using "ODIN" due to lots of bugs i disliked that mod. I tired flashing the stock android 5.0 for note 3 N900 but i'm not able to flash and i'm just reaching til this point. Please help me out with this error.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUCMK2_N900ODDCMK1_N900DDUCMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
MY NOTE 3 SCREEN DISPLAYED THIS MESSAGE AFTER TRYING THIS FLASH:
"sw rev check fail device 4 binary 3"
TRIED FLASHING WITH:
N900XXUCMK2_N900ODDCMK1_N900DDUCMK1_HOME.tar.md5
Click to expand...
Click to collapse
Other than "sw check..." does it shows "reactivation lockn"?.
Sent from my SM-N920C
No i haven't got any message like "Reactivation lock" I've downloaded an another rom from samsung official websites for official rom's and tried installing and it successfully got flashed. Few decices doesn't flash with INU and few with the other so i tried both of the Indian versions.
Are you flashing the latest rom for the phone from sammobile.com?