Hi folks,
today I was messing with some things on my phone, flashing etc. Then I got SAMSUNG logo and system wasnt able to load. So i did factory reset and wipe things (included my backup files - punch me in my face!). So I choose to flash stock rom via ODIN, but it didn´t complete, and after reboot i got that screen that I have to connect phone to Kies and do restore, but Kies can´t recognize my device. Also, I´m not able to enter TWRP. I have acces only to DOWNLOAD mode and to that screen which says that I have to connect phone to Kies.
My device is G900F, country-Slovakia.
I tried flash custom rom from sammobile - PDA: G900FXXU1ANH6, It goes thru system.img, boot.img, recovery.img etc, but when it is on hidden.img it says following
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE help me!
It would be great when you will help me with my issue, maybe provide som flashable firmwares (the one I found was one and only ond sammobile)
Here is full list what ODIN says:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANH6_G900FTMS1ANH2_G900FXXU1ANK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
And screenshot:
Robotr0n said:
Hi folks,
today I was messing with some things on my phone, flashing etc. Then I got SAMSUNG logo and system wasnt able to load. So i did factory reset and wipe things (included my backup files - punch me in my face!). So I choose to flash stock rom via ODIN, but it didn´t complete, and after reboot i got that screen that I have to connect phone to Kies and do restore, but Kies can´t recognize my device. Also, I´m not able to enter TWRP. I have acces only to DOWNLOAD mode and to that screen which says that I have to connect phone to Kies.
My device is G900F, country-Slovakia.
I tried flash custom rom from sammobile - PDA: G900FXXU1ANH6, It goes thru system.img, boot.img, recovery.img etc, but when it is on hidden.img it says following
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE help me!
Click to expand...
Click to collapse
You are attempting to flash TMS firmware, but what is your device's CSC?
You may need a PIT file to flash with it.
Related
hello everyone
i rooted my s4 a while back, then unrooted by flashing XSA-I9505XXUEMK9-20131212101727 through odin
then i decided to root it again, it worked but this time the wifi stopped working so i flashed XSA-I9505XXUEMK9-20131212101727 (same firmware) again, except everytime i do it, odin gives me a fail
i used a pit file to flash with XSA-I9505XXUEMK9-20131212101727 (same firmware again), except during the middle of this process, the connection between my cable and phone broke
tried pit + XSA-I9505XXUEMK9-20131212101727 (same thing) on odin 3.09 after the first attempt, it gives me a fail and this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> NON-HLOS.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
right now, when i try to boot my phone, it gives me "firmware upgrade encountered an issue. please select recovery mode in kies and try again", though i can't do anything in kies
all i can access is download mode, recovery mode doesn't work either (it never did, even when my phone was fine)
please help
chilifourloko said:
hello everyone
i rooted my s4 a while back, then unrooted by flashing XSA-I9505XXUEMK9-20131212101727 through odin
then i decided to root it again, it worked but this time the wifi stopped working so i flashed XSA-I9505XXUEMK9-20131212101727 (same firmware) again, except everytime i do it, odin gives me a fail
i used a pit file to flash with XSA-I9505XXUEMK9-20131212101727 (same firmware again), except during the middle of this process, the connection between my cable and phone broke
tried pit + XSA-I9505XXUEMK9-20131212101727 (same thing) on odin 3.09 after the first attempt, it gives me a fail and this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> NON-HLOS.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
right now, when i try to boot my phone, it gives me "firmware upgrade encountered an issue. please select recovery mode in kies and try again", though i can't do anything in kies
all i can access is download mode, recovery mode doesn't work either (it never did, even when my phone was fine)
please help
Click to expand...
Click to collapse
Although this message your phone is in download mode
change usb port and try again
try different port
Fixed it somehow........
actually disregard all that, i flashed the pit file by itself in odin 3.09 and everything works again O_O
i'm missing an app which is weird...
i still can't reflash XSA-I9505XXUEMK9-20131212101727 through odin though, it still gives me a fail, which ends up ruining everything again, so i reflash the pit and now this happens
i did a factory reset, now samsung keyboard keeps crashing and the menu and back button do nothing
wth is happening ._.
chilifourloko said:
i still can't reflash XSA-I9505XXUEMK9-20131212101727 through odin though, it still gives me a fail, which ends up ruining everything again, so i reflash the pit and now this happens
i did a factory reset, now samsung keyboard keeps crashing and the menu and back button do nothing
wth is happening ._.
Click to expand...
Click to collapse
maybe wrong or corrupt firmware file try another
pda4g said:
maybe wrong or corrupt firmware file try another
Click to expand...
Click to collapse
which firmware should i use
does it matter ?
chilifourloko said:
which firmware should i use
does it matter ?
Click to expand...
Click to collapse
download firmware for your country
Your file may be damaged
download new
pda4g said:
download firmware for your country
Your file may be damaged
download new
Click to expand...
Click to collapse
redownloaded firmware, stopped antivirus and all kies processes, changed usb ports to one of the back ones, reflashed firmware from ~80 percent battery aaaaaaaaaaaaand...
IT WORKS !!!!!!!!!!!!!!!!!!!!!!!!!!!!
HALLELUJAH
chilifourloko said:
redownloaded firmware, stopped antivirus and all kies processes, changed usb ports to one of the back ones, reflashed firmware from ~80 percent battery aaaaaaaaaaaaand...
IT WORKS !!!!!!!!!!!!!!!!!!!!!!!!!!!!
HALLELUJAH
Click to expand...
Click to collapse
ok Good luck!
Hello.
From the very begining I would like to say that I've been searching for solution for 6 hours already through all possible forums and known issues , trying found suggestions but still I have a problem.
I wanted to update my Android from 4.4.2 (STOCK ROM) to another and newer 4.4.2 (STOCK ROM) version but ODIN 3.09 gave ma an error:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNH2_I9505PLSGNH1_I9505XXUGNH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried on various versiond of ODIN - the same results.
Now my phone is not able to launch - it gives me only the screen with
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Click to expand...
Click to collapse
In KIES I can't do the emergency recovery mode because KIES can't see the device. I've tried on Windows with KIES3 and KIES but also on KIES for MAC - all with the same result ;(
I don't know what to do, I'm hopeless - could you help me somehow ??
Change of USB cable/port and verify if Kies 3 is completely closed when you are using ODIN.
Hello guys!
I am on stock 4.4.2
Downloaded stock rom from sm.
Tried to flash - fail at hidden.img.ext
FLASh failed.
Now i can't boot my phone.
Knox is still on 0x0
Kies doesnt recognise my phone to try recovery...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BNL9_G900FVFG1BNL1_G900FXXU1BNL9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What to do?
The obvious answer is to flash the rom again in Odin.
If no joy with flashing Lollipop try and flash a Kitkat rom and then try flashing Lollipop again.
Try Odin 3.07
I had the same problem with 3.09, spend several hours flashing and downloading the FW again and again. I finally tried with Odin 3.07 and everything is OK.
apmos said:
Try Odin 3.07
I had the same problem with 3.09, spend several hours flashing and downloading the FW again and again. I finally tried with Odin 3.07 and everything is OK.
Click to expand...
Click to collapse
Will try now.
tried with 3.10.0 still nothing
Tried with stock 4.4.2. still the same....and on the other computer too with windows 7
before was doing on windows 8
So...odin 3.07:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BNL9_G900FVFG1BNL1_G900FXXU1BNL9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
NOT GOOD AT ALL!
I can't flash any rom to G900F with odin, can't boot my phone...constantly getting FAIL (SIZE)!
What to do next?
This is info from the screen:
ODIN MODE
PN: SM-G900F
CB: Samsung Official
SS: Official
RL (KK): OFF
KWV: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV
SECURE DOWLOAD: ENABLE
UDC START
Don't get it.
I have tried SPANISH firmware LOLIPOP 5.0 (unbranded) and it worked!?!
I am on Croatian VIP network, bought it there...tried to flash VIP's 4.4.2 and 5.0
and it failed everytime no matter to ODIN version....
So? What to do next? Why i am not able to flash my branded firmware?
Usually when that message appears in odin it means the the firmware you're trying to flash has not the same partitions as your memory, try to find pit file for your VIP version and then flash again using that file
Well let it fail then remove the cable put it back reset odin check repartition and flash put file.. your phone will work but i have not idea what is tha secure boot and download i am still searching.
Hello.
I have a problem and cant find solution.
Last night I try flash Resurrection Rom 5.3.2 on my new S4 I9505. I flash CWM , instal ROM, Gapps, Kernel and what was funny, getting reboot every couple second and touch doesnt work. After that I try restore my backup but when I do this stuck on samsung logo. Now try flash with odin new firmware I9505XXUEMK8_I9505O2UEMK1_O2U but in odin is always fail.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
(when I use PIT file)
and
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help guys coz I need phone to work
I f****d my phone like this one time...
It is because you tried to install Android 4.3 (I know MK8 is JellyBean) when you have the phone partioned on KK.
Try to reconnect the phone and somehow install that .pit file. It is very important. You can try more of those files, I've seen 2 or 3 .pits for i9505 on XDA.
After that, do not try to install the firmware again because it won't work. Instead, download the .tar or .tar.md5 of PhilZ Recovery or TWRP. You should be able to flash them. If it succeded, now you will be able to acces the custom recovery and install a ROM again (i suggest you something closer to the stock KK to set things up, and then you can search for another Lollipop rom).
I hope it'll work!
Hello,
First I was on 4.4.2, then I've switch to 5.0. ( without root priv )
Today I've downgrade from 5.0 to 4.4.2, and my "note 3" bricked!
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNH1_N9005TMNGNL2_N9005XXUGNH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I've download .pit file from here, and my "note 3" got re-partition.
Now I want root my android, but I got this error ( using this tut here )
Code:
NAND Write Start!!
<ID:0/004> FAIL!
I need your help, I want clean (rom, pit, 4.4.2 system) with root for my "note 3- n9005"
Thanks.
your first mistake: updated to loli(s..t)pop.
second: not saved rom creddentials
solution: kies 3 or odin
dancapitan said:
your first mistake: updated to loli(s..t)pop.
second: not saved rom creddentials
solution: kies 3 or odin
Click to expand...
Click to collapse
when my note bricked, I try restore from kies, but I can't
now I need clean .pit and 4.4.2 software with root
a7m3d said:
when my note bricked, I try restore from kies, but I can't
now I need clean .pit and 4.4.2 software with root
Click to expand...
Click to collapse
1. That .pit file is good but you have to flash the correct firmware for it: HERE. Follow the steps of that thread too for flash the firmware correctly.
2. Take out the battery of your device when the process of flashing finish (wait 10 sec.). Put it in again.
3. Boot your device in Stock Recovery and select: Wipe data/Factory reset.
4. Select "Reboot System Now" option then.
5. Root it then with that method you posted b4.
Joku1981 said:
1. That .pit file is good but you have to flash the correct firmware for it: HERE. Follow the steps of that thread too for flash the firmware correctly.
2. Take out the battery of your device when the process of flashing finish (wait 10 sec.). Put it in again.
3. Boot your device in Stock Recovery and select: Wipe data/Factory reset.
4. Select "Reboot System Now" option then.
5. Root it then with that method you posted b4.
Click to expand...
Click to collapse
1- I've download PIT from here, and download firmware from here, and flash the firmware.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005DBTENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
2- when flash finish, I've take out my battery from device. ( I didn't put "auto-reboot" in Odin3)
3- I've Wipe data/Factory reset with Stock Recovery.
4- I've Reboot System.
5- I try to root it with http://androidxda.com/root-samsung-galaxy-note-3-sm-n9005
but the problem:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
a7m3d said:
1- I've download PIT from ...
Click to expand...
Click to collapse
1. Try flashing this custom recovery first: HERE.
2. Flash this FILE via TWRP. Reboot then.
Joku1981 said:
Try flashing this custom recovery first: ONE.
Click to expand...
Click to collapse
I've going to setting, and enable developer mode then I've root my phone again and it's rooted!
but my phone still reboot and reboot (dosen't stop??)
edit; I've done ‘wipe cache partition.’ and it's work now
Please close the topic