Hello,
Im sure there is a walk thorugh somewhere but I am unable to find one that has been able resolve my issue. I have recently attempted to root my phone using cf-auto root.I am using a Note 3 sm-n900w8 bell mobility. I am unable to restore the frimware or factory reset my device, each time it will get stuck in the boot page apon start up stating boot mode- seanoid enforcing. I am able to turn the device on and use it if I turn the device on in boot mode then select restart.
I am unable to factory reset the device within the phone menu itself or using kies. Kies actually cannot detect the device.I have tried an ova updated and it wont let me as i am running a custom frimware. I have attempt to locate and find the original frimware and im having difficulty doing so. I have yet to trip knox. Can any one point me in the right direction or to the correct frimware. The current frimware on my device is n900w8vlucnb7
I was trying to upate the SUBinary and it told me to reboot. As soon as I did I get a message saying "Custom Binary Blocked by FRP" and a red text saying "Secure Fail : Kernal" help me.
It has something to do with your Google account being logged into the phone.. samsung can send signal to reset it but they won't if it's been rooted etc still trying to make sure reflash omg the phone with original rom would make it worse or not. Or maybe just reflash in the kernal. I'm on t mobile but can only find original rom on t mobile same network but we will see. I'm on my fiance a accident messaging from her phone lol or maybe just reflash the kernal the whole problem for me is I don't have a computer to try to reflash from what someone told me I may try to reflash with odin 3.90 with a tar file to the exact model number
Solution
I had the exact same problem as you but i found a fix
i know this is a very late response but who knows maybe some people will run into it
First of all you will need
-odin3
-samsung usb drivers
-g530w tar md5 file find yours here (im telus variant but bell worked for me)
https://1fichier.com/dir/OgrN3QNx
or
https://www.youtube.com/watch?v=N33i15UVCyA
g530w Pit file here
https://drive.google.com/file/d/0BzyeAt2hy6Xea0VPUDBLOWY5WU0/view
or
http://www.sammobile.com/forum/showthread.php?t=30863
and use odin to flash your phone while its in download mode connected to your computer
skip to 1:28
https://www.youtube.com/watch?v=6lki9ei2-WM
sorry for super messy post i rarely post things i hope this saves you time
This is the best and quick fix for FRP Lock
...Just follow the link: https://forum.xda-developers.com/grand-prime/help/custom-binary-blocked-frp-t3266961/page3
Worked for my SM-G530W
I had the same problem, and i used Kies3 (not compatible with my phone anyway), but if you go on toolbar to "TOOLS", "Firmware Upgrade and initialisation", it asks you for your device model (for mine i typed SM-G530W, and then it asks you for device serial number (S/N) found under the battery by the IMEI number. After this, follow on screen prompts (Restart your device in Download mode/ PDA, connect USB cable, etc), and let the software download and install (factory rom); After your device restarts, you are good to go (sometimes if it gets stuck on booting, remove battery for few second and start again.) Now you have to go back and set up everything you want, including re-rooting your device... Good luck. (My device is Galaxy Grand Prime SM-G530W Factory unlocked rom, Android 5.11.
Hi, I recently became a Galaxy S6 Edge+ as a gift, which is stuck on the Samsung Logo (blinking). I am not new to flashing Firmware and Roms (came from the HTC HD2 and Dell Streak 5), but everything I do, I can not come through this. Now I need your help, since it's my first Samsung device. Maybe I have something forgotten?
My device:
SM-G928F with Regional Code AUT (free Switzerland firmware) --> Also Samsung Smart Switch shows me this AUT Version (but it wont recognize it, shows it after typing in the serial)
What have I done:
Samsung Smart Switch does not recognize it.
The last 24 hours I have downloaded the firmware through SamFirm 4 times, I have flashed the phone via Odin about 8 times, after the flashs I have wiped the cache and resettet data (full wipe) through the recovery. One time, the phone came to the android optimatization, but it was stuck on the last app (was 30 minutes on this), after reboot it was stuck on the Samsung logo.
Now I need your help. What can I do further? Do I missed something? Any ideas?
Something strange I noticed: When the phone is off and I plug it in to the wall, the battery drains. I have to put the phone to Download-Mode to charge it. Is it linked to the firmware problem? The charger is original Samsung.
So, I flashed TWRP, the Note7 Deodexed Rom and SkyHigh kernel, but it's the same... any sugestions?
I read about a pit file, what is that? May be this the solution?
What I did the last 3 houers was to test Smart Switch With the mac version, the rescue function did not work, the hole program crashed each time. On the windows version it suceed, but my phone is showing just the blinking Samsung logo. Every now and then it vibrates, but nothing happens, so I am at the start of the problem again. Any ideas?
Next update: I flashed the original firmware with a pit file 3 minutes ago. I learned a lot, learnt that the pit files are the partition-files. Now I'm hoping, that with the new partitions it will boot properly :good: . Stay tuned!
Still the same issue. Please help me
Whenever I start the Recovery, it says "installing system update" and then there is a dead Android, does this matter?
A 4 part firmware with pit file did not help. I downloaded another Firmware from another source, also the same. Now I will do a downgrade and look, if this helps. Pleeeeease, help me!
Infos from the download mode:
Produkt Name: SM-G928F
CA_Type: CA_3
Current Binary: Samsung Official
System status: Custom
Secure Download: Enabled
Know warrenty void: 1 (0x0203)
RP SWREV: B:3 K:0 S:1
Maybe the TWRP Log helps: There are errors in writing, is there something missing? It is the original firmware, with the newest TWRP and SuperSU installed. Still stuck on Samsung (animated) logo.
Listen do you have windows on ur mac i use parallels
but do you have windows anyhoe
Sent from my SM-N920G using Tapatalk
Same here
Hello,
I'm quite new here, but not with flashing.
My son got an S6 Edge plus too, with almost the same problem.
I tried also almost anything, the last few days.
ADB sideload, Odin several versions.
It started out with FRP lock.
After I tried al I could find I think it bricked.
And now it is in the state as described above.
Only first screen and draining the battery if not in download mode.
And when I put it on USB cable it says: "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
But Smart Switch doesn't recognise the phone!
I can however get the phone in download mode by pushing vol. down, power and home and then vol up.
But in Odin only works: Pit, CP and CSC.
With AP and BL I get errors and fails.
Please help?
For me AP and BL works with Odin. I am a step furhter now. First I flashed with the option: Erase All Nand. Then I installed TWRP and a made a repair for the System and the Caches partitions. With SuperSU installed, and the caches wiped (manual, dalvik and normal caches), it says "Android is starting, Optimizing Apps" and then "Androis is starting, Starting Apps" on a blue screen and when it loads to the end, it is stuck there.
.You get only the first Samsung S6 Edge+ Screen? Then the system files are missing, there is no OS to start (flashed with AP in Odin). Your flash problem sound quite strange. Did you test another cable?
If you want to do it with Smart Switch, the phone should be in download mode. I also had to try it several times. Did you installed the drivers?
@ KatariaMax: I have Windows and Mac PCs, no Parallels. Does it work with Parallels?
So, one problem less. With the Audax rom and kernel, the phone charges normally (but not with Quickcharge), so I don't have to put the phone to download mode. But here is the same problem, after "starting apps" it is stuck. I will do a log from the install, maybe this helps.
@ HugoGroot: Maybe the second post could be the solution for you: http://forum.xda-developers.com/galaxy-s6/help/s6-bricked-t3497687
I read about Sony devices, which are in a bootloop because of the battery. Could this be possible also for Samsung devices? I have bought a battery, just to be sure. Any other suggestions?
I found the problem here: https://talk.sonymobile.com/t5/Xperia-Z3-Compact/Continuous-Restart-and-Optimizing-Apps/td-p/1020656
My phone went down one day when I switched off the alarm by pressing the power button.
and from then on when switching on, it stays on the boot screen
Unable to enter recovery mod and unable to install software via Kies
Phone not yet rooted,approximately 1-year use, lollipop 5.0.2 , Model : SM G360FY/DS
Any have any idea what might have happened and any solution?
trickster10 said:
My phone went down one day when I switched off the alarm by pressing the power button.
and from then on when switching on, it stays on the boot screen
Unable to enter recovery mod and unable to install software via Kies
Phone not yet rooted,approximately 1-year use, lollipop 5.0.2 , Model : SM G360FY/DS
Any have any idea what might have happened and any solution?
Click to expand...
Click to collapse
I don't have your model of phone, I've got SM-S820L. Have you tried booting into ODIN mode?
If you haven't tried that, I would do so and try using ODIN to flash a firmware update. You will need Samsung Drivers, a new release of ODIN3, and Kies or Kies3.
There are some good guides on this site that can push you along your way to full recovery of your phone.:good:
Psilocelium said:
I don't have your model of phone, I've got SM-S820L. Have you tried booting into ODIN mode?
If you haven't tried that, I would do so and try using ODIN to flash a firmware update. You will need Samsung Drivers, a new release of ODIN3, and Kies or Kies3.
There are some good guides on this site that can push you along your way to full recovery of your phone.:good:
Click to expand...
Click to collapse
TRIED BUT STILL NO LUCK:crying
People at service center said to change the board of the phone and it costs around 70$.
IS THEIR NO OTHER WAY?
NO CHANCE OF GETTING A NEW PHONE
I'm sending you a PM right now my friend!
EDIT: Problem solved!!!
I used this tutorial: https://forum.xda-developers.com/sa...very-samsung-sm-a510f-fd-exynos7580-t3314399/ to install TWRP and root my SM-A510FD on 6.0.1 . My device was rooted and working perfectly until stupid me decided to turn off "OEM Unlock" and i restarted my phone and now it says "custom binary blocked by frp lock" The only thing i can do is go to the Download mode. I tried to use Samsung Kies and Smart Switch when in Download mode but they tell me that my device is not supported. But Odin detects my device and says "Added!!". I am currently downloading the stock firmware for my device from Sammobile and i plan to flash it using Odin.
- Will putting the firmware file in the AP section of odin and clicking start work to fix the problem? (I do not care if i will loose data)
- If this will not work is there anything else that i can do? I can't take it to repair because Knox is tripped and i do not have my receipt. If my phone is bricked forever please tell me so i don't waste my time trying to fix it.
Thank you so much in advance! Any help would be extremely appreciated!!
CrystalGTX said:
I used this tutorial: https://forum.xda-developers.com/sa...very-samsung-sm-a510f-fd-exynos7580-t3314399/ to install TWRP and root my SM-A510FD on 6.0.1 . My device was rooted and working perfectly until stupid me decided to turn off "OEM Unlock" and i restarted my phone and now it says "custom binary blocked by frp lock" The only thing i can do is go to the Download mode. I tried to use Samsung Kies and Smart Switch when in Download mode but they tell me that my device is not supported. But Odin detects my device and says "Added!!". I am currently downloading the stock firmware for my device from Sammobile and i plan to flash it using Odin.
- Will putting the firmware file in the AP section of odin and clicking start work to fix the problem? (I do not care if i will loose data)
- If this will not work is there anything else that i can do? I can't take it to repair because Knox is tripped and i do not have my receipt. If my phone is bricked forever please tell me so i don't waste my time trying to fix it.
Thank you so much in advance! Any help would be extremely appreciated!!
Click to expand...
Click to collapse
Just flash stock firmware and you are good to go, if it wont boot turn it off, reboot to recovery(stock) and wipe data & factory reset, later you can again flash twrp and root but dont turn off OEM unlock.
Antonio GT-I8730T said:
Just flash stock firmware and you are good to go, if it wont boot turn it off, reboot to recovery(stock) and wipe data & factory reset, later you can again flash twrp and root but dont turn off OEM unlock.
Click to expand...
Click to collapse
Thank you so much for replying man, i was f*cking panicking! I'm gonna try that when the download finishes. Thanks again! :good:
Antonio GT-I8730T said:
Just flash stock firmware and you are good to go, if it wont boot turn it off, reboot to recovery(stock) and wipe data & factory reset, later you can again flash twrp and root but dont turn off OEM unlock.
Click to expand...
Click to collapse
What about when my j7 says custom binary blocked by frp lock(boot.img) secure fail:kernel. It will boot into recovery, and download. Factory wipe does nothing, so recovery mode is useless to me at the moment. my computer detects the phone enough to say Unknown USB device (Device Descriptor Request Failed) driver error as the label of the phone. No matter what mode I'm in. Drivers are up to date, odins good, usb port, computer, and data cords are all good. I've flashed other phones and hooked this one up to another pc to see that it says the same thing. How do I get the computer and/or odin to agree with my phone enough to pick it up as a good device?