[FIX] Trouble Putting In Download Mode After D80120G OTA With Broken Root - G2 Q&A, Help & Troubleshooting

I recently accepted the D80120G OTA form T Mobile while rooted on stock recovery and naturally root broke. I couldn't reroot with stump root because the root script was still on the phone. Stump root said device was already rooted. I tried to install KDZ file to "unroot", but could not get phone to boot into download mode.
The following is a fix for rerooting your phone with stump root if it says your device is already rooted even though your root is broken.
1) Launch LG Mobile support tool
2) With phone on, plug in USB
3) Select PC Software from phone USB settings
4) Wait for LG support tool to recognize phone
5) Select "Upgrade Recovery" from options in LG support tool
6) Wait for LG Support tool to complete recovery
You shouldn't need to back up anything as it will not wipe your phone. However, better safe than sorry.
Now stump root should work with brute force method!

This worked for me! Thanks so much for the post!
Sent from my LG-D801 using XDA Free mobile app

R3XB said:
This worked for me! Thanks so much for the post!
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
I'm glad i could help! I knew I couldnt be the only one with this issue.
Sent from my LG-D801 using XDA Free mobile app

Will test it but just tell me this bro
I wish and pray this helps me too.. I have the same issue... Trying to test it but battery too low.. Now charging and would let u know with thanks for sure..
Btw my phone was rooted before 20g and just wanted to ask if i dont wanna factory reset my phone b4 this method..

This method did not reset my phone. However; backing up is still good practice before doing anything. Best of luck to you.
Sent from my LG-D801 using XDA Free mobile app

Hey. I really love you for this. It worked like a charm. How you figured it out bro? The process of recovery upgrade seems to manipulate system files which enabled the rooting process to succeed.
Anyways thanks again.
Sent from my LG-D801 using XDA Premium 4 mobile app

Brilliant!
Many thanks for posting this...worked perfectly!
FWIW, my phone was NOT recognized after installing the G2 drivers from the LG download page. I had to install the entire LG PC Suite. No idea why this worked out over against simply installing the drivers, but I thought I'd add the tidbit here in case anyone else has the same issue.
Thanks again!

Mine says no problem to fix
Sent from my LG-D801 using XDA Free mobile app

I faced this issue some time ago but my phone wasn't rooted. I did a CSE flash to JB and took OTA until my phone was up-to-date and when i reached the last update I couldn't boot into download mode.

Did u ever find a fix to put into do we nload mode
Sent from my LG-D801 using XDA Free mobile app

had the same situation and this method works for me LG G2 D80120G. thanks

cristian_18 said:
had the same situation and this method works for me LG G2 D80120G. thanks
Click to expand...
Click to collapse
Worked like charm for my T-mo G2 D801 20G with lost root access after taking OTA (4.4.2.) Had to do it twice (crashed during install at 80%) and it does involve the 1.6GB download of the firmware (for those who are wandering)... Thanks for this.

I have the same problem, but after i click upgrade recovery a popup windows say " no upgrade items to fix"
who should i do now

xcyice said:
I have the same problem, but after i click upgrade recovery a popup windows say " no upgrade items to fix"
who should i do now
Click to expand...
Click to collapse
same here....

U4mes said:
same here....
Click to expand...
Click to collapse
Without experiencing this issue myself, I would suggest checking each step for completion. Aside from that I cant offer any alternative fixes. Hopefuly someone else on this board can discover a work around from their experience.
Good luck!

WTF!!!
I followed these instructions exactly. My t-mobile phone rebooted and now it has Lollipop. I'm pretty sure they haven't released it officially...

jose325i said:
I followed these instructions exactly. My t-mobile phone rebooted and now it has Lollipop. I'm pretty sure they haven't released it officially...
Click to expand...
Click to collapse
Lol! Amazing! Screenshots?
Sent from my LG-D801 using XDA Free mobile app

Here you go! Having issues at the moment though. I can't download anything from the Play store. Gets stuck at the downloading bar and never downloads anything. Might have to reinstall.

jose325i said:
Here you go! Having issues at the moment though. I can't download anything from the Play store. Gets stuck at the downloading bar and never downloads anything. Might have to reinstall.
Click to expand...
Click to collapse
I also found this article tonight. Its for the G3, but reading through the comments also confirms it worked on G2. Thats crazy you stumbled on this. I wonder why its available through the lg tool? Let us know if you figure out the bugs.
http://m.androidcentral.com/lollipop-update-available-lg-g3-through-lg-mobile-support-tool
Sent from my LG-D801 using XDA Free mobile app

U4mes said:
same here....
Click to expand...
Click to collapse
I have the same issue.

Related

EMMC brick?

I was on a phone call suddenly phone turned off. Tried booting it it would go past the GOOGLE logo. I went into recovery but nothing is able to mount. Trying flashing stock img through TOOLKIT errors, I guess cause won't mount. Any solutions? I heard it might be the EMMC chip?
Try flashing the factory images manually
http://forum.xda-developers.com/showthread.php?t=2010312
Sent using xda-developers app
Chromium_ said:
Try flashing the factory images manually
http://forum.xda-developers.com/showthread.php?t=2010312
Sent using xda-developers app
Click to expand...
Click to collapse
No :crying: like nothing can be flash. Every time I try it ends up with "flash write failed"
theedon323 said:
No :crying: like nothing can be flash. Every time I try it ends up with "flash write failed"
Click to expand...
Click to collapse
Last resort: http://forum.xda-developers.com/showthread.php?t=2347060
Yeah looks like the telltale sign of a dead emmc, like the Samsung Galaxy S3, sorry.
xda app
Chromium_ said:
Last resort: http://forum.xda-developers.com/showthread.php?t=2347060
Click to expand...
Click to collapse
Tried it and nothing. It's just not able to write into the system, fails everytime. I appreciate your help. LG G2 is next I guess.
eksasol said:
Yeah looks like the telltale sign of a dead emmc, like the Samsung Galaxy S3, sorry.
xda app
Click to expand...
Click to collapse
I think so. Do you know the reason for it? Do you think it was because i had the XPOSED framework mod?
theedon323 said:
I think so. Do you know the reason for it? Do you think it was because i had the XPOSED framework mod?
Click to expand...
Click to collapse
I use Xposed framework, I don't see that being the issue and how it could cause a hardware failure. I have heard this issue before when tons of people had their S3 died suddenly, there is a big thread of it in its forum.
You'll probably want to wait for the Nexus 5.
sent from xda premium app
eksasol said:
I use Xposed framework, I don't see that being the issue and how it could cause a hardware failure. I have heard this issue before when tons of people had their S3 died suddenly, there is a big thread of it in its forum.
You'll probably want to wait for the Nexus 5.
sent from xda premium app
Click to expand...
Click to collapse
That was my plan but I can't go another day without a phone D; isn't the Nexus basically a LG G2 just little tweaks and Kit Kat
theedon323 said:
That was my plan but I can't go another day without a phone D; isn't the Nexus basically a LG G2 just little tweaks and Kit Kat
Click to expand...
Click to collapse
Well it would be better if you have a backup phone. It will be based on the LG G2 and gsmarena.com even post is specs, but until it's officially announced by Google it's all speculation.
You could use get the G2, but since it's not the nexus you won't get the same software experience and developer support, price is a big deal as well. Also rumor is the Nexus 5 will support all LTE bands, but that's to be seen.
sent from xda premium app
So this happened to my phone. Brought it to a repair shop and said the EMMC was dead.
Long story short, credit card company refunded the purchase price, I bought a Nexus 5, but I still kept the dead Nexus 4.
Is it possible to buy a replacement part/motherboard to replace this, or is it completely shot (fine with that)?
If it is dead, I was going to recycle it or offer it up for parts. With an EMMC brick, is there anyway to recover any of my personal information that was on the phone?
Thanks!
You'd have to get a new motherboard. Check eBay. No way to get your info off out that I know.
Out of curiosity, what were your symptoms of the phone?. Did you ever try to lock the bootloader and it wouldn't lock?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You'd have to get a new motherboard. Check eBay. No way to get your info off out that I know.
Out of curiosity, what were your symptoms of the phone?. Did you ever try to lock the bootloader and it wouldn't lock?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Motherboard ~$100. Might give it try. The teardown instructions dont' seem too daunting. Do I have to worry about this IMEI stuff?
As for symptoms. I was completely stock, and locked bootloader. I was doing something and then it froze on me.
Went to reboot, and it was stuck on the boot animation (merging dots).
Ended up trying a tool kit to flash the phone. It worked, got back into the system and as it was downloading apps, it froze again.
This time, when I went to reflash, it would error would error with a "failure to write to flash".
recovery.img flashing
your emmc is not corrupt. you want to flash single file of recovery.img.this file is in the firmware find by extract firmware by winrar and 7zip. first flash recovery.img than flash whole firmware by adb 100% it works . and also take help from nexus toolkit in future
owaisali said:
your emmc is not corrupt. you want to flash single file of recovery.img.this file is in the firmware find by extract firmware by winrar and 7zip. first flash recovery.img than flash whole firmware by adb 100% it works . and also take help from nexus toolkit in future
Click to expand...
Click to collapse
You realize this thread is two years old right ?
but i read it know
boltthrower56 said:
You realize this thread is two years old right ?
Click to expand...
Click to collapse
dear i don't know who is you but i read it know because of that i give the solution of these problem hehehe
owaisali said:
dear i don't know who is you but i read it know because of that i give the solution of these problem hehehe
Click to expand...
Click to collapse
It could help someone here, I'm facing the same issue, could you please detail your suggestion please?
Here is my request for help...
http://forum.xda-developers.com/nexus-4/help/nexus-4-stuck-animation-android-t3419997
Newbie here... :/

[Q] help me please

Hi guys well I have a LG G2 from AT&T and I recently got the update for the knock code and I went to do it and it say my phone is suspected to rooting because awhile ago I rooted it.to do the camera mod so I did and then I unrooted it and just left the camera mod on there well now I can't update it I have already factory reset it and it still say the.same thing help me
And the camera mod.is still there
bmxbrad0212 said:
Hi guys well I have a LG G2 from AT&T and I recently got the update for the knock code and I went to do it and it say my phone is suspected to rooting because awhile ago I rooted it.to do the camera mod so I did and then I unrooted it and just left the camera mod on there well now I can't update it I have already factory reset it and it still say the.same thing help me
And the camera mod.is still there
Click to expand...
Click to collapse
it's because of the camera mod, it install a couple of file that are not part of the stock rom and modifies a couple of the stock files, you would need to revert to stock d80020c and then ota to 20k/20u
Alright man how do I do that I'm sorry just never gone that far with it so
Sent from my LG-D800 using XDA Free mobile app
bmxbrad0212 said:
Alright man how do I do that I'm sorry just never gone that far with it so
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
back to stock guide also keep in mind you att d800 variants so you must use method for att with lg flash tool a tot files not kdz
Thank you man I will do that I have some common sense in how to do this but thank you man for the help
Sent from my LG-D800 using XDA Free mobile app
Hey man when I do this can I really **** up the phone or should I be fine like I don't wanna destroy it it's under warranty but yea dude
Sent from my LG-D800 using XDA Free mobile app
bmxbrad0212 said:
Hey man when I do this can I really **** up the phone or should I be fine like I don't wanna destroy it it's under warranty but yea dude
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
this guide is basically to return phone like it was brand new just opened from box, it is also used for warranty purposes like you rooted then for example screen broke you return to stock unrooted and claim warranty, and it won't mess up the device because both the dll and tot file have file checks to make sure that you are using correct files for your device so there is nothing to worry about just make sure your pc doesn't shutdown on you during the process because that can be bad

Root without having to unlock bootloader

I successfully rooted my shield without unlocking bootloader using towelroot. When you install the apk and run it it says it will reboot in 15 seconds, but it will take a little longer than that for some reason so just let it sit for a while. After it reboot I had the SuperSU from chainfire's website downloaded. Use root explorer to open the zip. Go to common folder and install the apk. Worked for me.towelroot.com. download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
cool, I hope it just does not break future updates of the shield ...
alucard_xs said:
cool, I hope it just does not break future updates of the shield ...
Click to expand...
Click to collapse
Me too. But it is very easy to unroot through the SuperSU app. I would just make sure you undo anything you change system wise before unrooting like uninstalling busybox.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
devilsmack said:
I successfully rooted my shield without unlocking bootloader using towelroot. When you install the apk and run it it says it will reboot in 15 seconds, but it will take a little longer than that for some reason so just let it sit for a while. After it reboot I had the SuperSU from chainfire's website downloaded. Use root explorer to open the zip. Go to common folder and install the apk. Worked for me.towelroot.com. download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Are you on the 77 update? Kitkat.
Thanks, do you know if this works on any other devices, i know that you root your N3 using the method, i want to use it on my moto G, running kk, i will try it, thanks again
Holy ****! Geohot made this?
Sent from my SHIELD using Tapatalk
psycho1200 said:
Thanks, do you know if this works on any other devices, i know that you root your N3 using the method, i want to use it on my moto G, running kk, i will try it, thanks again
Click to expand...
Click to collapse
I believe Geohot said it should work on any phone with a kernel date before June 3. Shouldn't hurt to give it a try. It will either root or it won't. I think the Motorola community has been able to unlock some bootloaders after using this root method. Check the forums for you particular device.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
rushless said:
Are you on the 77 update? Kitkat.
Click to expand...
Click to collapse
Yes.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
devilsmack said:
I successfully rooted my shield without unlocking bootloader using towelroot. When you install the apk and run it it says it will reboot in 15 seconds, but it will take a little longer than that for some reason so just let it sit for a while. After it reboot I had the SuperSU from chainfire's website downloaded. Use root explorer to open the zip. Go to common folder and install the apk. Worked for me.towelroot.com. download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip.
Click to expand...
Click to collapse
this worked for my shield using latest update with a locked bootloader. brilliant! saved me alot of time!
strange, the app seems to hang ... is it normal ?
Does not seem to work for me, when I click on "Make it ra1n", the app seems to hang and the texte beneath the "make it ra1n" is still "click the button to root no more reboot required" ... and that's all ...
UP : I use towelroot v2, did you use v1 ?
UP2: I tried v1 without success , it's written reboot in 15 seconds but i's been 6 minutes right now ... how long did you wait before it reboots ?
alucard_xs said:
strange, the app seems to hang ... is it normal ?
Does not seem to work for me, when I click on "Make it ra1n", the app seems to hang and the texte beneath the "make it ra1n" is still "click the button to root no more reboot required" ... and that's all ...
UP : I use towelroot v2, did you use v1 ?
UP2: I tried v1 without success , it's written reboot in 15 seconds but i's been 6 minutes right now ... how long did you wait before it reboots ?
Click to expand...
Click to collapse
for me using v1 it hanged for about 1min, then I swiped it away in the multitasking panel and the device rebooted itself and then I had root access.. Seems little dodgy but it worked
thanks, same here now, seems rooted
Does not work with 4.22. I tried it.
YES! GODSEND! I rooted my shield as well as my HTC One X!! SOOOO Stoked!
what is a reliable link to get towel root? and thanks!
Sent from my SCH-I535 using Tapatalk
motrinHD said:
what is a reliable link to get towel root? and thanks!
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
The link is in the first post.
Sent from my SHIELD using Tapatalk
Hey having a bit of problems hoping someone can help? Like a previous user mentioned Towelroot hangs after clicking 'make it rain'. A few minutes go by and I get a 'not responding' prompt. If I click 'wait', a few Kore minutes go by then same thing again. If I click 'close' the device reboots without root.
I'm at a loss for what to do next.. Is it recommended doing this in safe mode? 4.4.2.
Cheers
How did you get this to work? I downloaded tr.apk v3, installed it, opened the app up and after clicking make it ra1n it says my phone is not supported?
Would changing the modstrings help, if so; to what?
Vustom said:
How did you get this to work? I downloaded tr.apk v3, installed it, opened the app up and after clicking make it ra1n it says my phone is not supported?
Would changing the modstrings help, if so; to what?
Click to expand...
Click to collapse
I don't know what the difference is but I used v1. Maybe do a search for that apk and see if it works for you.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
devilsmack said:
I don't know what the difference is but I used v1. Maybe do a search for that apk and see if it works for you.
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Every article I've found so far just links to the towelroot website. Can you mirror the v1 apk?

[Q] Verizon OTA update, and towel root

I apologize if this has been covered, but i cannot find another situation like mine.
I have the verizon variant of the Galaxy s5
Currently on version 4.4.2
I rooted using towelroot on 4.4.2 i believe.
The verizon update came through and i completely forgot about root.
I tried to install, and it failed, then i lost root access.
Currently sitting here without root access, running towel root v3 won't work nor will changing the modstrings.
Root checker says no root,
But verizon OTA update won't work either. Get the error at the android open belly screen.
I need some help, i used to be awesome working with motorola phones, and root/unroot/restore/custom roms.
Samsung is a different story.
I need to get on the android 4.4.4 update (without tripping knox) because my bluetooth connectivity is dog ****.
Thanks for the help.
-Nick
Solution,
Plug the phone into a windows laptop (may work on mac too) update the drivers. Auto play should pop up and VZW upgrade assistant will be an option. Click on this, it's pretty much automated from this point. You will not be rooted, even though a part of my problem was i wasn't rooted, but the update was failing. So thanks to HGFireHazard. He's the man.
If you have any questions i will try to answer them.
THanks
Nick
bump
scarinu10 said:
I apologize if this has been covered, but i cannot find another situation like mine.
I have the verizon variant of the Galaxy s5
Currently on version 4.4.2
I rooted using towelroot on 4.4.2 i believe.
The verizon update came through and i completely forgot about root.
I tried to install, and it failed, then i lost root access.
Currently sitting here without root access, running towel root v3 won't work nor will changing the modstrings.
Root checker says no root,
But verizon OTA update won't work either. Get the error at the android open belly screen.
I need some help, i used to be awesome working with motorola phones, and root/unroot/restore/custom roms.
Samsung is a different story.
I need to get on the android 4.4.4 update (without tripping knox) because my bluetooth connectivity is dog ****.
Thanks for the help.
-Nick
Click to expand...
Click to collapse
Having the same issue here. Any help would be greatly appreciated. I did a factory reset and that didn't solve the issue.
I was able to get updated to NI2. If you plug in the phone to a computer (Windows in my case), you can run the VZW Updater that Windows asks if you want to run when you first plug in the phone. From there it pretty much takes care of everything. Although obviously I'm now unrooted and will have to find a way to get that back.
Ni2? What is that.
Sent from my SM-G900V using XDA Free mobile app
scarinu10 said:
Ni2? What is that.
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
NI2 is the newest build from Verizon but it's the 4.4.4 you're looking for.
Ok. Thanks didn't realize it was called ni2. It does it all through the updater though on the desktop?
Sent from my SM-G900V using XDA Free mobile app
scarinu10 said:
Ok. Thanks didn't realize it was called ni2. It does it all through the updater though on the desktop?
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Those are just the last 3 digits of it. That's basically how those on the forum have been distinguishing between updates is by the last 3. Yup it did everything. Once I installed the app and told it to update it did everything start to finish without any additional input from me.
How did you install the upgrade assistant. Verizon website says auto play should pop up. But it's not popping for me. USB debugging is enabled. Did you manually download it
Sent from my SM-G900V using XDA Free mobile app
scarinu10 said:
How did you install the upgrade assistant. Verizon website says auto play should pop up. But it's not popping for me. USB debugging is enabled. Did you manually download it
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Are you on Windows 8 or 8.1 by chance? If so, when you plug it in you should get a pop up in the upper right hand corner that will allow you to run it.
No. Windows 7. It goes into installer mode to update drivers and then goes into media mode.
Sent from my SM-G900V using XDA Free mobile app
scarinu10 said:
No. Windows 7. It goes into installer mode to update drivers and then goes into media mode.
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
There should be a popup that comes up when you first plug in the device. If there isn't, that's a setting you must have changed in Windows that you will have to modify. I originally tried to find an executable to run myself as it took me a minute to find the location to run it on Windows 8.1 but I wasn't able to locate. Unless someone else can chime in you'll have to get that popup to show.
Just flipped over to my girlfriends windows 8.1 laptop. seems to be installing just fine.
Thanks for all of the help i will report back if this works.
Thanks
Nick

Need a little help...

I accidentally messed around with my build.prop and mistyped something causing my phone to brick. So the problem atm is I can't even use my phone with messages popping up such as "Unfortunately the process com.android.systemui has stopped working" and "Unfortunately the process Home has stopped working." I tried to factory resetting which didn't work at all. Right now I am trying to fix it through flash but I can't since when I plug my USB into my computer, I can't changed my USB settings to MTP and since the messages shown above keeps popping up preventing me from clicking anything on my screen. Any help would be appreciated!
You "accidentally messed arround with the build.prop"???
Can you access TWRP recovery?
You do know that you can transfer files over it?
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
You "accidentally messed arround with the build.prop"???
Can you access TWRP recovery?
You do know that you can transfer files over it?
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
Oops stated that wrong. Guess I was in a hurry trying to fix my phone but no it was not an accident. And sorry, not too good at this stuff but what is TWRP recovery?
TPFN said:
Oops stated that wrong. Guess I was in a hurry trying to fix my phone but no it was not an accident. And sorry, not too good at this stuff but what is TWRP recovery?
Click to expand...
Click to collapse
.___.
It is a modernised recovery menu,with easier,touch controls.
Basically a MUST when flashing roms.
I guess you dont have that...
Now the only thing you can do is flash the stock rom again with the kdz or tot method.
DO NOT TRY RESTORING IT WITH LG PC SUITE!
It will brick your device,because it had been rooted(LG made that on purpose-"kill dem rooted phones")
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
.___.
It is a modernised recovery menu,with easier,touch controls.
Basically a MUST when flashing roms.
I guess you dont have that...
Now the only thing you can do is flash the stock rom again with the kdz or tot method.
DO NOT TRY RESTORING IT WITH LG PC SUITE!
It will brick your device,because it had been rooted(LG made that on purpose-"kill dem rooted phones")
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I stated above in the post that I had already tried flashing but it says my phone was not plugged into the pc. I can't change to option of the USB to MTP which then my computer can't recognize.
TPFN said:
I stated above in the post that I had already tried flashing but it says my phone was not plugged into the pc. I can't change to option of the USB to MTP which then my computer can't recognize.
Click to expand...
Click to collapse
With the LG PC Suite,LG Flash Tool or the TOT method?
They react differently.
And if your phone won't ,you either have no drivers,or have bad ones.
Try on another PC also,but be sure to have drivers installed.
Connect the device inDOWNLOAD MODE
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
With the LG PC Suite,LG Flash Tool or the TOT method?
They react differently.
And if your phone won't ,you either have no drivers,or have bad ones.
Try on another PC also,but be sure to have drivers installed.
Connect the device inDOWNLOAD MODE
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I used the LG Flash Tool. I downloaded the driver I believe called the LG United something, don't exactly remember the name.
I tried on 2 PCs already with the same result unable to recognize my phone even though I hear the sound when I plug it in.
And how do I connect it through download mode? Jk I found out how. I'll see what happens next.
TPFN said:
I used the LG Flash Tool. I downloaded the driver I believe called the LG United something, don't exactly remember the name.
I tried on 2 PCs already with the same result unable to recognize my phone even though I hear the sound when I plug it in.
And how do I connect it through download mode?
Click to expand...
Click to collapse
Meh,sounds like your Download Mode
is also broken.
Does anything happen when you turn your g2 completely off and connect it to the PC?
Sent from my LG-D802 using XDA Forums Pro.
EDIT
Also,make a screenshot with the Snipping Tool of the Device Manager when your G2 is connected
The Marionette said:
Meh,sounds like your Download Mode
is also broken.
Does anything happen when you turn your g2 completely off and connect it to the PC?
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
Well I got the Download mode to work, but I'm not exactly sure if it's working since its stuck on 0%.
And no nothing happens.
TPFN said:
Well I got the Download mode to work, but I'm not exactly sure if it's working since its stuck on 0%.
And no nothing happens.
Click to expand...
Click to collapse
If you aren't flashing anything,it will show 0%. xD
http://forum.xda-developers.com/showthread.php?p=45293512
This is the guide for both KDZ and TOT methods.
I also had a simmilar issue,but my flashes with KDZ would always stop at 2%.
So I went with the TOT method and it worked.
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
If you aren't flashing anything,it will show 0%. xD
http://forum.xda-developers.com/showthread.php?p=45293512
This is the guide for both KDZ and TOT methods.
I also had a simmilar issue,but my flashes with KDZ would always stop at 2%.
So I went with the TOT method and it worked.
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I'll try the TOT one out. But quick question I have a sprint LG G2 and there are like 3 different zip files and idk which one my exact model is...
And thanks a lot for helping me through this, this is the first time this happened to me and i'm just in a mess right now...
TPFN said:
I'll try the TOT one out. But quick question I have a sprint LG G2 and there are like 3 different zip files and idk which one my exact model is...
And thanks a lot for helping me through this, this is the first time this happened to me and i'm just in a mess right now...
Click to expand...
Click to collapse
The box your phone came in has the model number(if you cant recognise the model number,take pictures of all sides of the box,and I will tell you(do hide/cover the IMEI number))
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
The box your phone came in has the model number(if you cant recognise the model number,take pictures of all sides of the box,and I will tell you(do hide/cover the IMEI number))
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I currently don't have a device for taking a photo but I found the box and I believe this is the model #: LGLS980WTK
But comparing it to the 4 downloads, I can't seem to find it... any help?
The 4 Downloads are: LS980ZV8_13.zip, LS980ZVA_01.zip, LS980ZVC_12.zip, LS980ZVE_03.zip
The Marionette said:
The box your phone came in has the model number(if you cant recognise the model number,take pictures of all sides of the box,and I will tell you(do hide/cover the IMEI number))
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
Ok I have a problem atm of getting an error when flashing:
Error:CrossDL [SM-G920F] to [LS980]
That was the model I was trying to change to during build.prop, and I'm assuming the flash is assuming my model is the samsung one.
Do you have teamveiwer I might be able to help you out. Otherwise you can get your phone fixed on eBay like I did when I super bricked my phone.
Sent from my LG-D800 using XDA Free mobile app
TPFN said:
I currently don't have a device for taking a photo but I found the box and I believe this is the model #: LGLS980WTK
But comparing it to the 4 downloads, I can't seem to find it... any help?
The 4 Downloads are: LS980ZV8_13.zip, LS980ZVA_01.zip, LS980ZVC_12.zip, LS980ZVE_03.zip
Click to expand...
Click to collapse
Erm...
Did you ask for guidance at the thread I provided?
The OP is good at helping when details are troublesome.
Sent from my LG-D802 using XDA Forums Pro.
xmayhemreturnsx said:
Do you have teamveiwer I might be able to help you out. Otherwise you can get your phone fixed on eBay like I did when I super bricked my phone.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
I have teamviewer. Mind if i do it tmr?
No problem
Sent from my LG-D800 using XDA Free mobile app
The Marionette said:
Erm...
Did you ask for guidance at the thread I provided?
The OP is good at helping when details are troublesome.
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I found out which model I had but I have a new problem now in a newer reply I posted.
"Ok I have a problem atm of getting an error when flashing:
Error:CrossDL [SM-G920F] to [LS980]
That was the model I was trying to change to during build.prop, and I'm assuming the flash is assuming my model is the samsung one."
Just wondering if you know what is going on then ill ask in the thread.
TPFN said:
I found out which model I had but I have a new problem now in a newer reply I posted.
"Ok I have a problem atm of getting an error when flashing:
Error:CrossDL [SM-G920F] to [LS980]
That was the model I was trying to change to during build.prop, and I'm assuming the flash is assuming my model is the samsung one."
Just wondering if you know what is going on then ill ask in the thread.
Click to expand...
Click to collapse
I suggest you ask in that thread.
I probably could help you if you had an international d802 variant.
Other variants(especially operator-modified ones) are not familiar to me.
Sent from my LG-D802 using XDA Forums Pro.

Categories

Resources