Related
Hi!
I got my hands on ZAGG's invisibleSHIELD for X10, it's on the way thru delivery.
I saw their videos, and it's seem hype.
Anyone have personal experience with this product?
Also, right now, I have a rubber-not-so-tight-fit casing for the X10, but I want to get one that has tight-fit, real tight fit rubber casing to put on after the invisible shield? Recommendations?
Something in the lines that matches with iSkin, that the have for the "not so hype" iPhone...
If you go up a level to the Sony Xperia X10 menu page and have a look in the accessories subsection there is a lot of info on cases and screen protectors etc which might be helpful to you.
I bought Zagg's full body invisible shield before for my SE Satio. They were difficult to apply. Also, the screen responsivenss was better on the stock screen protector. You dont really need to replace it if yours came with one. The Zagg screen protector feels sticky to the touch. Not so good on a capacitive screen
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
ddewbofh said:
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
Click to expand...
Click to collapse
Well, I was just stating a fact that it does come with a back shield, and it's the best cut piece of the set. While I do like the bare back feel of the x10, the option is there for people to use it or not use it.
I got myself a Martin Fields screen protector. Applied it today. So far really loving it. Will review it soon.
InvisibleSHIELD is also supposed to be real good, but a pain to apply correctly.
needmoregigs said:
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Click to expand...
Click to collapse
I had the same experience with my Zagg sheild. Tappered sides and what not. Anyway I am not a fan. What I would like to know is if there is similiar screen shields to the ones for the iphone?? They have almost the texture of a sheet of paper, never streak and seem to provide excellent responsiveness. Im not sure of the different types of protectors but if someone knows of one like this let me know!
Also the Zagg shield on the back of the X10 is actually pretty sweet......its not slippery. In fact its the exact opposite. You can set the thing down on the dash of the car while charging and it will not slide around at all. But hey, if thats worth $20 then have at it.
Not bad...
I have the invisibleSHIELD for my X10 and it's not to shab... but not too good...
As with one of the posts above, the front screen protector was not cut to fit properly; there is a gap on my screen about 1/4" on the right side, however the left side is flush. I emailed Zagg about it and they have sent me a new one and apologized that the case was damaged during shipping (although it was very clearly NOT damaged during shipping, it was just cut that way).
The rest of the case fits snug, but it does get dirty/sticky on the edges. I will be getting another case to put over it; likely the FlexiShield.
I personally like the feel of the screen protector more than the stock protector. I have both of them on right now and have no issues with the touchscreen whatsoever. The Zagg shield never fingerprints, but it would with the stock protector.
Overall, I would give the invisibleSHIELD a 7 out of 10. If I was rating the screen protector alone I would give it 8 out of 10 (points dinged for the improper fit, hopefully the replacement sits flush).
If you are like me and want a mint looking phone you might get a little frustrated by the scummy edges, however the material is strong and you will definitely not scratch anything. I recommend doing away with the full body case and just getting the screen cover in combination with another case!
Cheers!
Update: Received the replacement but the screen protector is even more tapered on the edges than my original. I've scrapped the shield and went with a plastic fitted case. Too bad, I really like the quality of the material. I'm going to try and get a refund.
Wow! Judging by the reviews, I am not glad that I went for MF instead of ZAGG.
I got protech which is essentially the same thing and I have to say its pretty good. I've used invisible sheiks in the past on a g1 and found it was easier to apply to the x10. You have to be really patient though if you leave the smallest air bubble on the edge as previously mentioned dirt and dust gets trapped underneath and starts to peel.
Sent from my X10a using XDA App
I have full body Zagg ... it sux.
The size of the front part is not right so i have about 2mm on edges which are not covered.
The top, bottom and side parts are already gone.
The back part is still there ... for now.
I have a gadget shieldz full body.
I'll try it in about 2 weeks when the zagg will be gone.
Zagg lasted about 3 months.
I have the Martin Fields one bought from Mobile Fun. It is the biggest fingerprint magnet in the history of phones. I bought the double pack thinking I'd have a spare as back up. The actual screen applies beautifully but it has lifted in the top right hand corner near the proximity sensor. I managed to reapply it without taking it off totally but its still not perfect.
I want the same shield we bought for hubby's Iphone. Its a matt anti reflective one and shows no finger marks. I spend my life cleaning smudgy prints off mine.
To clear out what others said and my experience with zagg shield,
It all comes to how accurate are you when attaching it.
But if you want some advice, just put the back part only. The stock screen protector is much better, the side parts are too hard to put on.
and take care They are very stretchable. ..
Sent from my X10i using XDA App
I agree, the Zagg screen protector makes the screen slightly sticky or something. Makes it hard to drag things across the screen like when moving cards in Solitaire etc. I'm on the lookout for a good screen protector now, wish i never removed the stock one!
I actually like the feel and look of the back protector and yes, the side and bottom protectors are a bit too finicky and strechy for clumsy people like me to put on properly!
Painfull Installation - Happy Though!
Hey!
So, I finally had time over the weekend to apply the invisibleShield to my X10, the full-body, "maximum protection" version.
Just let me tell you:
(1) Painfull process - took nearly 2 hours from start to finish, minus break / re-doing time because i wasn't completely satisfied.
(2) Not enough solution - the spray bottle they gave is enough for 1 time installation only! No room for mistakes. Found out the solution was Johnson's brand baby shampoo & distilled water (I didn't have any distilled water, instead, used a new bottle water from Nestle brand) ... worked like a charm
(3) sizing - oh man! the sizing of the invisible shield is not perfect, except for the back piece ... front has gaps, 1/2mm or less on either side.
(4) Applying ... it took me about 3 times to get it right, fitted accordingly. That's how I ran out of the solutions.
(5) Squeeze is not good on small pieces, better to use a q-tip to slide thru the solutions off.
Overrall, it's a different feeling. Getting used to it.
Only thing I would ask ZAGG to do is: PROVIDE A BOTTLE WATER size of solution!!!! & correct sizing of the pieces.
- Just 1 or 2 mini bubbles seen just by me, otherwise, it's a charm!
Still, I got my hands on a iPhone 4 32GB as well, kit for that is coming soon. Should be easier ...
I wish they had Otter Box style casing for X10.
tell us about fingerprint and screen clarity ...
naveen_reloaded said:
tell us about fingerprint and screen clarity ...
Click to expand...
Click to collapse
Clarity is ok.
Fingerprints ... way better than the original but still not good enough ...
Just don't drop sun protection lotion on your phone
You will need another invisible shield ...
Fingerprint is not there, or atleast, very much of it is reduced. I am a clean freak, so, I clean it everyday before putting it to charge for the night.
Senstivity was something to get used to, little bit off in the beginning, but after the curing process of the invisibleshield, it works like a charm.
Anyways, I contacted ZAGG, they are sending me another full kit for the X10, since I complained about the sizing & not enough solutions ...
I have to wait for approx 1.5 weeks to receive, remove the old/existing one, and do it correct the 2nd time around.
Of course, i need to send back the one I have right now when I receive the other one...
I'll post a message on how my 2nd attempt went, (with extra bottle of solution, yeah! that's right! I demanded to the agent on the email for 2nd bottle of solution)...either way, baby shampoo & distilled water is good enough too.
Screen Clarity - 100% or 99.99% , unless you angle the phone differently in the light or reflection , you dont see it.
I had the full body but took it off.
I bought the white X10 in dubai, like everyone else said fitted poorly and bleeds the colours from your case, I had to take it off as everyone was saying how battered the phone looked after a month.
It is pretty bullet-proof though, sure it must look better on the black phone!
I just noticed a few scratches that I'll have to live with.. Maybe I'll have to buy a case now (thought going naked would have been fine)
I know there are plenty of topic on this, but most cover actual defects.
Btw, just wanted to say that I LOVE this device. No way I'm returning. Not even this unit! Can't! Spent soo much time customizing it, and even the benchmarks are slightly above average
Anyway... My problem right now is the chamfered edges and the bottom speaker grill.
The silver One is susceptible to the same amount of scratches as the Black One, albeit they won't be as prominent on the silver variant.
The unit I'm talking about is actually a replacement. The first One I owned had defects, but even for the short time I had it, it somehow managed to build a few dents and scuffs on the chamfered edge up at the top speaker grill.
This time, the problem's on the bottom! I have a few scuffs on the bottom chamfered edge... It's been 4 days in my possession, and already is growing hits and dings. Now here's the interesting part.. As a university student, school's out and the phone has pretty much left the house only once! Other days it laid either in my hand, on my pocket, or on the floor right by my bed.
I looked at it and thought that maybe I can polish them when they get worse.. But things took a turn for the worse right away!! As I was examining the scuffs on the edge, I came across a hairline scratch that extended from the bottom of the lower speaker grill to the top (of the speaker grill) -- almost like a crack -- a hairline crack. Looks as if a pencil lightly went over it.
I've attached photos for your viewing pleasure, but as minor as they appear, note that it's only been about 4 days!! I'm wondering what'll come out of it over an extended period of use.. Guess I can live with whatever has happened to date though =]
*please note that the images aren't too good a representation of the actual damage to the device. It's slightly worse in person -- the abundance of light blurs the scratches a bit.
Arghhh the photos have since showed less of the damage as I had to resize the images to 640* 425 (instead of 4288 * 2848 )
To me, it's just like a dead pixel. You can't tell it's there in normal use, but once you find it, it'll haunt you for a while. At one point you won't care.. But when you see it again, you'll start kicking yourself.
I've been babying my phone, but I think it's time for me to go up onto Amazon and buy myself a good case. *flies to look at the Accessories forum*
Any of you folks keeping your phone naked experience any unexplained scuffs and nicks on your edges? Scratches on your speaker grill?
You guys think that we'd be able to -- at some point -- replace the speaker grills with OEM parts? I'm sure people will come across much worse problems...
No matter what device, what manufacture or what materials the device is made out of, if you don't use a case, this will happen and worst. Your scratches are barely visible. I had to zoom in the picture to see them.
I don't have the device yet but I already have 3 cases for it and a pack of screen protectors. The official flip case and 2 tpu s line cases, one black and one clear.
Sent from my HTC myTouch 4g using xda premium
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Did you check the phone over when you got it? Just asking as I've seen a one or two with some nicks and scratches out of the box I'm guessing it happened when polishing the chamfered edge.
Man, how do you use your phone to manage to put these scratches and dents.
I have had the phone since last Friday with daily use and no scratches, I just put a skinomi clear film in the back to protect against scratches and dents, the front is naked, looks beautiful, you don't even notice the film is there
Sent from my HTC One using Tapatalk 2
I have films on the back and front of the device myself!
I honestly do not know where these came from. It's been on my desk or on the floor by my bed. Hasn't left the house -- maybe just once..
Anyway I attached another saddening photo. This was taken with my old Atrix.
I'm thinking that this may have been a result of missing the charging port and accidentally sliding the micro usb plug into the front of the phone while I was half asleep...
Anyway, I'm sitting here and there's much greater things to worry about. It could have been much worse... A random scratch on the screen or a deeper nick...
Besides, the bottom speaker grill is a separate piece and if it continues to get scratched up and continues to bother me, I'll just see if i can get it replaced..
Hope I actually move on. This is the same feeling as when I found a dent on my $700 guitar.. I got over that. So ill probably get high over this
Aha I'm wondering what it'll feel like when I find a small scratch on my first new car -_-... Boy will I be a mess!
Sent from my HTC One using xda premium
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
muayyadf1 said:
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
Click to expand...
Click to collapse
Yep. But I'm hoping that maybe next year they make the switch to a harder metal like steel... The OPPO Find 5 allegedly has a steel frame construction. Sure it's heavy, but if they get the right look, whatever! Durability should be of more importance than weight..
Now if it does weigh too much, maybe implement the steel construction only around certain areas...
I'm aware this will pull up costs, but the device would be that much better!
Dharkan said:
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Click to expand...
Click to collapse
There's another thread about scuffs on the black edition. Maybe I've got too far... You can't see this if you're not looking for them, but to me they'll always be there.
I've seen multiple accounts of folks on here see through their black paint into the aluminum underneath.. You'd want to avoid that.. So I don't regret having the silver edition.
They both scratch the same amount, but the black shows more..
Good luck and I hope you enjoy your One just as much as I am!
Choose the device that also to you more! If you like the stealthy black, but that! But if you do, go for the Poetic Atmosphere case.. Looks pretty nice on the black variant.. The silver one.. Not so much.
Still going to look for a case, but it isn't my priority.. I'd rather keep the phone naked and enjoy the cool feel everyone I touch it in the morning!
Dharkan said:
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
Click to expand...
Click to collapse
I've wipes this, took a moist set of wipes below the actual holes, but nothing. There is a scratch, not a surface scratch, it's slightly deeper.
100% sure this ain't going away.. But i haven't lost all hope! As this phone e grows in popularity, some ebay sellers will manage to get their hands on some grills and they should be replaced rather easily since they're in there only via an adhesive. Would have been more ticked off if it was on the screen, on the chamfered edge off of the back, or even on the back itself..
Here's hoping the grills are replaceable and I can do something about it in maybe 6 months!
Sent from my HTC One using xda premium
I had mine with no case for almost 1 week and not a single scratch
Sent from my HTC One using xda app-developers app
No idea what to say. I'm keeping it naked. Maybe this was from the factory.. I don't see how you can get a scratch from the bottom to the top of a grill without taking your phone out much...
Maybe I didn't notice this before, but i still am worried about the durability of the device. If pocketnow reports bad durability, then I've got no option but to go with a case. Right now i dont even know where these came from.. No sand in my room, no hard metals that would easily scratch anodized aluminum..
It really IS a mystery...
Sent from my HTC One using xda premium
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
WolfDale7 said:
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
it's not the aluminum i'm worried about
hamdir said:
it's not the aluminum i'm worried about
Click to expand...
Click to collapse
Oh Crap. Overlooked that!
Wow..
Kay so time to look for a similar case to the one you've got
I want to keep the beauty of the HTC One visible while still protecting it from further scratches...
Everything over on the accessories forum doesn't really cut it go me :/...
I'll go to this mall that pretty much just sells phone cases and phones. Hopefully I find a store that has what I want for a reasonable price
Sent from my HTC One using xda premium
WolfDale7 said:
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Click to expand...
Click to collapse
Probably the thinnest, plastic case around. does not add bulk like otter cases do. you should check it out...
http://www.bestbuy.com/site/Platinu...&st=platinum series case htc one m7&cp=1&lp=1
Also, it's aluminum. Whoever thinks aluminum, a softer metal, won't scratch, is lying to themselves.
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
nullkill said:
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
Click to expand...
Click to collapse
how will a rubbery cover scratch it? you mean if it falls?
hamdir said:
how will a rubbery cover scratch it? you mean if it falls?
Click to expand...
Click to collapse
No TPU is not rubbery its more like flexible hard plastic. If the case fits well the TPU material will scratch the phone from taking it off putting it back too much. If anything get in between the phone and the case game over it's almost worse than naked. It's sold as rubber like or soft but I have 20 different TPU cases and all are the same crap. Otterbox and the others I mentioned use silicone which is like a soft rubber. TPU is a cheap is injected crappy material that is why you will find cases as low as $5 or lower.
Is anyone using this phone completely naked? No case, no screen protector, no back protection? I asked this another way a little earlier; only one response. Very curious. I'm looking at the Z5 Compact and the Samsung S6 Edge. I prefer the specs and size of the Z5, but I know 2 people who use their Edge without any protection. After several months, they still look good.
All opinions appreciated.
Thanks.
Not very old but I use mine with a tempered glass screen protector that you'd never know was there anyhow... Phone doesn't have a mark or look worn
Any protection on the back?
Nothing on the back, it's not glass like the Z3 Compact...
x2srj said:
Nothing on the back, it's not glass like the Z3 Compact...
Click to expand...
Click to collapse
Well, it is glass at the back, it's just frosted.
I have screen protectors both sides. Usually backside gets more hits
I just put a tempered glass screen protector on mine and am debating getting a $3 aluminum bumper from eBay until the Devilcase is released. I like the look of the phone naked and have had it that way for a few weeks, but I already have a few tiny nicks on the poly carbonate ridge along the backside. They're hardly noticeable, but the phone hasn't taken any hard drops. I'm thinking the PC won't hold up long term without getting damaged.
I've been using the phone without case since one day.
I'm just worried about the camera glass. I'd put a ring a bumpon or something to lift up that area a bit.
Sent from my E5823
Doesn't feel like the glass backing of the zc compact to me, it doesn't slide off the sofa either
Completely naked here. I am worried of dropping the phone, cause its damn slippery...
By the power of Sony Xperia Z5 Compact
i never used any kind of protection for any phone i owned.
why should i make it ugly to save it from getting ugly by time?
x2srj said:
Doesn't feel like the glass backing of the zc compact to me, it doesn't slide off the sofa either
Click to expand...
Click to collapse
Does not change the fact that it still is glass at the back.
If you do not believe us google some reviews.
I have a red carbon skin on the back, makes it a little bit less slippery
Psykhe said:
Does not change the fact that it still is glass at the back.
If you do not believe us google some reviews.
Click to expand...
Click to collapse
I'm not saying I disbelieve you am I? Just saying it doesn't feel like it does on a Z3
It's kind of matt glass. Very good for me, no visible finger prints
Running mine naked but have only had it for a day. It's the smallest phone I've used in awhile and I've almost dropped it a bunch of times. I have a tpu case coming today to help with the grip.
Sent from my E5823 using Tapatalk
Completely naked. Have a little scratch on the back, looks like a discolouration. I will get tempered glass for both sides if I can find it in a store where they can also attach them for me.
Sent from my E5823 using XDA Free mobile app
I use a Glass screen protector on the front that where 2 bucks on ebay and on the back i have a plastic protector that i bought from ebay also, pieces where 99 cent and i rock a clear case and a black s case and i bought these rubber plugs for the earphone jack and charge port so it wont collect dust also 2 bucks for 100 pieces.
Running terrapin bumper on mine. Phone is just too damn slippery not too
Sent from my E5823 using Tapatalk
I've only owned two smart phones in my life. The very first one, I got a silicone case and a SGP (plastic) screen protector. I've scratched the screen protector maybe twice, not sure if it would have scratched glass. I owned it for 2 years
For my second phone, I saw some videos about how silicon cases and bumpers don't really protect against drops because of how thin they are. I decided I didn't need the case but still got the protector since it has no affect on clarity, feel, thickness. I've had it for three years. Scratched the screen protector three times. I don't know how it happened but I did get a tiny crack in the bezel. Since it's black its barely noticeable.
I've dropped my phone plenty of times. Usually not from far, like 2-3ft onto carpet.
I just ordered the Z5 Compact. I decided to try the tempered glass protector. And I also ordered the Orzly Fusion bumper case. I figure the hard back might actually protect something. I figure the slippery body and sharp corners make it more susceptible to damage. Also, I'm paying full price for this phone so I'm more inclined to protect it.
I read about people that use their phones naked all the time. Maybe it really isn't needed but I don't want to take the chance with my own phone.
One other alternative I can think of is to buy insurance for your phone. Something with a low deductible.
Currently I'm using an S5 without any cases or covers, and it's still drop-proof, dropped it multiple times on hard floor/concrete and there is no damage on the screen what so ever. And before that I had an HTC One X, which is probably more similar to the Edge in that the screen isn't protected if it drops face down, I did eventually crack it with that kind of a drop. However the edge is gonna be even more problematic because even the back is glass, and no plastic protruding edge to protect it.
Sure I could put it in a bulky case but then it kind of defeats the purpose of having one of the most premium feeling phones ever doesn't it? It'll also negate any ergonomic benefits of the curved back edge as well as the ease of edge swipe on the front edge. Might as well just get something like a.... I don't know, nobody makes high end plastic phones anymore now days, even cheap phones like One Plus is front+back curved glass. Also this thing is already a bigger phone than what I'm used to, adding a beefy case is just gonna make it that much bigger, which I do not like.
Well I guess plenty of people did survive the iPhone 4 glass sandwich era just fine, I'll just have to wish myself luck. I wonder how much would one of those adhesive skins help in a drop situation. Sure they are very thin but if think about the physics of it, gorilla glass is actually quite flexible so it doesn't break from the acceleration of the impact itself, so thinness doesn't really matter. What actually breaks these surface hardens glass is usually a microscopic failure on the surface developing into a big crack. And those microscopic failures can happen when they make contact with sharp hard stuff like individual sand particles, they effectively puncture the surface and develop a weakness. So if you have a skin on the glass, what'll hopefully happen instead is that the skin will be thick enough for the particle to not make direct contact with the glass, and prevent breaking. Even though such thin skins cannot significantly reduce the impact acceleration.
I understand your points, but please, don't ever try to use this phone naked. You NEED a case, the grip is so bad that dropping it is almost a guarantee and the back glass seems to be much more fragile than the front glass from what I have seen in videos. About the cases, you may want to look into the Samsung official plastic backs or (when available) the leather backs. The official plastic back cases from Samsung are the only ones (in my opinion) that really do not ruin the phone's design, the design remains almost intact. However, while the grip is much improved over the naked phone, it is nowhere near other bulky and rubberized cases. A rubberized plastic wrap would be a solution, but the big problem still remains - the metal sides of the phone which are very narrow.
PS: As I understand from the latest spy pics, the iPhone 7 will have a glass back again...probably needed for radio/charging/payment/other secret developments.
There are plenty of case available that won't make the phone look s**t. I'm using a Spigen Crystal Clear, a very good combination of protection and looks. It's impossible to completely keep the phone's look and feel, but it's probably as close as possible whilst being confident of being able to accidentally drop it from pocket height without damage.
Glass protectors on these curved screens are to be avoided, that's my personal opinion anyway. My brother bought numerous types of these for his S6 Edge (expensive and cheap) and not one went on properly without raising on the curves within twenty minutes, causing touch problems on the edges. Go for a good quality film type like a Zagg HD Dry.
I copied you entirely mate I'm not ashamed to say. Got my Spigen Crystal Clear yesterday and, your right, it does look good, but not as good as the nekkid phone itself. But I guess that's the price of good protection.
Just waiting for my Zagg HD Dry front and back covers to arrive today.
I'm personally using Otter Box Commuter for me and my wife's phone. I was able to try it on in store before purchasing. I was sort of desperate for a case on delivery day and it was the most protective case I found. I'm happy with it overall. It's sleep and slim and although the whole front in uncovered it does have raised top and bottom edges so if the phone falls flat the screen doesn't actually touch the floor.
Sent from my SM-G935F using Tapatalk
Use it naked.
Control your fingers.
nobnut said:
Use it naked.
Control your fingers.
Click to expand...
Click to collapse
Too risky lol
Sent from my Blackberry Bold
I would love to use the phone naked as it just looks so good, but I am scared to risk it. I have never dropped and cracked a phone, and I had an Iphone 4S without a case for 2 years which were well known for getting smashed, I have a clear case on the edge at the moment to offer it some protection.
Carrying and using smart phones without any case is just asking for trouble. I have the S7 Edge and when it arrived on March 2nd it stayed at home in the box until my Spigen Ultra Hybrid case arrived (which was a few days later). I was still using my S5 because I didn't want to take any chances.
After my case arrived I put it on but I still keep the original plastic film on the screen because I was waiting for my Skinomi screen protector to arrive. My Skinomi arrived yesterday and I installed it last night.
So if you don't want a bulky case get the Spigen Ultra Hybrid (I went with the crystal clear color). I ordered my case and screen protector from Amazon. The case is very nice looking and doesn't add any bulk to the phone.
Sk17z0 said:
but I still keep the original plastic film on
Click to expand...
Click to collapse
Oh my.
I'm using this case. It's amazing. Thin, easy to grip and not too expensive.
http://www.bodyguardz.com/unequal-shock-case-samsung-galaxy-s7-edge.html
I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:
Juuls said:
I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:
Click to expand...
Click to collapse
Q.E.D.
Hello Everybody
I have installed a transparent but not so slim case to my LG G6.
I wanted to know whether this phone be maintained in mint condition without case easily ?
Please let me know your thoughts.
Hi, I Didn't thought about not using a case, currently using voia slim case that came with the unit free that i bought with some local store here in the Philippines. I am not sure if i would use it without a case, it seems fragile to me
The class back necessitates done protection, using Spigen ultra hybrid slim case.
Sent from my LG-H870 using Tapatalk
Using Spigen Thin fit case with SF matt finish.
Sent from my LG-H870 using Tapatalk
I use it without any protection ... The problem is the rear glass camera .. it's very very very easy to scratch poor quality
I don't use cases, I hate them. I frankly hate that today phones are presented without cases, companies present how they look nice without case etc. But they are made in a way that you have to use some ugly case anyway (camera bump, slippery back etc.) .
So I am using G6 without case (one of the few phones without camera bump and it is easy to hold) and so far it is ok, but I am afraid about the rear camera glasses of course...
I wasn't using a case, then as I took the phone out of my pocket it slipped and smashed on the floor. Got it repaired and now using a Spigen Thin Fit case on it (this one in fact https://www.amazon.co.uk/Spigen-Coated-Surface-Excellent-Compatible/dp/B01N6T3N9T )
I don't find it gets in the way at all, or adds too much weight to the phone, but as long as manufacturers keep insisting that "premium build" equals "making it out of fragile materials like glass" I'll will be using a case on all phones from now on.
Previously had a G4 and loved that the back was just a removable piece of plastic that would stand up to pretty much everything. I don't understand why phones have moved away from this kind of build over the last few years, and gone to slippy, delicate glass!
i hate cases .. they kill the design
i prefer Skins from Dbrand
I am using the UAG Ash case, still case see the case and gives it protection.
DamiDev said:
i hate cases .. they kill the design
i prefer Skins from Dbrand
Click to expand...
Click to collapse
Oooh, some of those are very nice!
I do love the design of the phone, but it's way too slippery for me not to use a case. I went for a Snakehive leather flip case and tempered glass on the screen.
Dbrand skin on the back, and insurance I love the feel of the naked phone.
Thanks to everyone for your participation and thoughts.
I am also considering skins instead of cases, but the problem with the skin is it is getting dirt especially in the edges after some time and they are turning yellowish as well.
The cases are cheap at least what I am using, but skins neither cheap not easy to apply again and again.
The skin I tried previously was Invisible Shield.
My phone colour is blue, so. the case/skin options are again getting limited, only transparent cases/skins are looking good.
Let me know your thoughts.
I use it without a case and got a skin for the back and camera lens. Keeps it from getting scratched to hell. I have dinged up against something while it was in my pocket and chipped the top but other than that nothing major at all. It was my fault those pesky basketball shorts let the pockets swing to much
I don't use case and i can tell lens protection is really really bad.
Ringke air crystal view ! (Y)
I am currently caseless. Sometimes I put a case on my phone but after a while, when I take it out to clean out the dust, I remember how nice it was with no case and leave it out for a few months. I have a thin TPU one which is nice, and a real wood one which looks amazingly good even though it is kind of a brick.
I am not a big fan of skins (had a clear one on an old phone and after a while it yellowed and peeled), but I do like the idea of the real wood ones (not the dbrand ones which are vinyl even if they look like wood). Might try one of those when my wood case breaks (which I'm sure it will).
As for the camera glass scratches - look through the forums here; consensus is that the glass is not scratching but it has a soft coating that scratches. This coating can be polished off and then no more scratches. And it doesn't seem that a case is any protection from whatever (temperature? air pressure?) is causing a few mysterious camera glass shatterings.
kingdave82 said:
I wasn't using a case, then as I took the phone out of my pocket it slipped and smashed on the floor. Got it repaired and now using a Spigen Thin Fit case on it (this one in fact https://www.amazon.co.uk/Spigen-Coated-Surface-Excellent-Compatible/dp/B01N6T3N9T )
I don't find it gets in the way at all, or adds too much weight to the phone, but as long as manufacturers keep insisting that "premium build" equals "making it out of fragile materials like glass" I'll will be using a case on all phones from now on.
Previously had a G4 and loved that the back was just a removable piece of plastic that would stand up to pretty much everything. I don't understand why phones have moved away from this kind of build over the last few years, and gone to slippy, delicate glass!
Click to expand...
Click to collapse
Yip, a brilliant, really slim fit case.
Sent from my LG-H870 using Tapatalk
i don't use a case on this phone yet. going for a skin whenever i get around to it with my list of things to buy. first time i went longer then a few days without a case. i went without a case since march. I use a holster on my pants or shorts. I am so careful with my phone so it doesn't get scratched or dinged up.
I was gonna go with a skin like Dbrand but I got this really thin case instead. Been extremely happy with it
https://www.amazon.com/gp/product/B071KXB9Z2/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1