Related
got an aussie galaxy s??? come here and ill anwser your questions
TheKoomba2010 said:
got an aussie galaxy s??? come here and ill anwser your questions
Click to expand...
Click to collapse
When will 2.2.1 be released in Australia?
Too hard to answer... ha ha ha
Prob before the US
So easy to do it yourself anyway.
Install CWM with Odin, then go to Docs kitchen and install the non-wipe version.
Bonus it shall work and is no dodgy Kies involved plus you get a real kernel, Speedmod etc and can convert the entire file system to ext4 aswell... Worth it just for the huge speed increase etc from stock..
Sent from my GT-I9000 using XDA App
it will be realeased in mid 2011 but in not going to tell u the real realease but i will be telling later on in the year
whats the difference between the Australian models and the Europe models? Cause I've istalled a Europe firmware and then Darkyy's ROM, works fine.
well it usually depends on what carrier your on. for example if your on optus u might get an australian open app. or if your on sprint you might get a wi fi hotspot option in the settings. the possibilities are endless... ill keep u updated on these changes
Nice to have an Ozzy thread. been in the dark for to long!Lol
I wont to flash the new xwjs3 with pit 803 using our CSC!
prana_Sky said:
Nice to have an Ozzy thread. been in the dark for to long!Lol
I wont to flash the new xwjs3 with pit 803 using our CSC!
Click to expand...
Click to collapse
yes i agree....
actually it appears that both of us are working on the same thing!!!! ill pm u as sson as possible when i figue it out
prana_Sky said:
Nice to have an Ozzy thread. been in the dark for to long!Lol
I wont to flash the new xwjs3 with pit 803 using our CSC!
Click to expand...
Click to collapse
yes i agree!!! us aussies need to stand up!!!
anyway about your question........
try this thread: http://forum.xda-developers.com/showthread.php?p=9745489
if that didnt help.....
pm me.....
TheKoomba2010 said:
yes i agree!!! us aussies need to stand up!!!
anyway about your question........
try this thread: http://forum.xda-developers.com/showthread.php?p=9745489
if that didnt help.....
pm me.....
Click to expand...
Click to collapse
Looks like while you were looking there I was looking here http://romkitchen.org/sgs/?s=generator
downloaded the file but don't know what to do with it .it's saying I need clockworkmod recovery to install feel lazy to do the prosess. I thought it would have been a odin flash and thats it.
Still might just go for the original xwjs3 flash unless someone know an odin flash way for romkitchen?
Why is pup still captaining the one day team, let alone even in the side and why hasn't hilditch been booted as a selector when he couldn't pick his nose properly with a torch and pair of needle nose pliers let alone pick a cricket team?
Tapatalk! We don't need no stinkin' Tapatalk!
Ok! Flashed xwjs3 with xwjpy modem and jp4 csc. works a treat!!
congrats
prana_Sky said:
Looks like while you were looking there I was looking here http://romkitchen.org/sgs/?s=generator
downloaded the file but don't know what to do with it .it's saying I need clockworkmod recovery to install feel lazy to do the prosess. I thought it would have been a odin flash and thats it.
Still might just go for the original xwjs3 flash unless someone know an odin flash way for romkitchen?
Click to expand...
Click to collapse
Cwm files are flashed from the phone. Just put the file on your sd card. Then download rom manager from the market and from it flash cwm recovery. Then boot into recovery mode. Might need to boot into recovery a second time for the cwm recovery version to show. Note that this only works if you have recovery mode 2e. You can tell which version you have when in recovery mode....it shows it on top. If you have 3e just flash cf root with odin. After all is working you can select the rom on your sd card from cwm recovery and flash it. I always download roms from my phone and flash with it as well. Haven't had to use a pc or odin fir months now. I'm currently on Doc's rom JPY but who knows about tomorrow
Sent from my GT-I9000 using XDA App
sxi200 said:
Cwm files are flashed from the phone. Just put the file on your sd card. Then download rom manager from the market and from it flash cwm recovery. Then boot into recovery mode. Might need to boot into recovery a second time for the cwm recovery version to show. Note that this only works if you have recovery mode 2e. You can tell which version you have when in recovery mode....it shows it on top. If you have 3e just flash cf root with odin. After all is working you can select the rom on your sd card from cwm recovery and flash it. I always download roms from my phone and flash with it as well. Haven't had to use a pc or odin fir months now. I'm currently on Doc's rom JPY but who knows about tomorrow
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Does cf root work with xwjs3? I have zip file, do I unzip or leave it ziped when putting on SD?? Does the file need a name??? might give it a go!
So first
1.flash cf root
2.put ziped file on sd card (asuming)
3.install clockworkmod
4.flash clockworkmod recovery, boot into recovery.
Once in recovery what do I do in recovery?
5.select rom and flash
cheers!
Really need to know which is the best modem and CSC for us Aussies. I'm on an Optus reseller here up in Brisbane and get pretty shocking reception most of the time.
wow..i didn't noe dat we hv an Aussie Thread Here..its Cool..Niwae Juz Wanna Share Wif Ya Dat I've Upgrade Mine Using Darky's Rom 2.2.1..but it seems like its sucking up my batt..& wen I run up the Quadrant benchmark,my device end up in either 3rd or 4th..unlike the others on 2.2.1 ending theirs up on the top..Juz Nt sure wer it when Wrong..But Overall Its Still cool..
prana_Sky said:
Does cf root work with xwjs3? I have zip file, do I unzip or leave it ziped when putting on SD?? Does the file need a name??? might give it a go!
So first
1.flash cf root
2.put ziped file on sd card (asuming)
3.install clockworkmod
4.flash clockworkmod recovery, boot into recovery.
Once in recovery what do I do in recovery?
5.select rom and flash
cheers!
Click to expand...
Click to collapse
You've pretty much got it. But in number 3. it's actually install 'rom manager' However not sure if cf root works on js3. I'm currently using jpy but it may work. It's just a kernal so if it doesn't just flash another compatible kernal. You will know if it works by using the 3 button method to enter recovery. If you see 2e at the top then all good.
For the zipped file you don't need to unzip. Just leave it as is. CWM recovery has an added option which allows you to select zip file from sd. you to select zip file you want to flash and you don't need to change the name. My files are names darkys...., docs... etc. You can rename them if you want.
When you flash cwm recovery from rom manager it creates an update.zip file on your sd card which normal 2e recovery uses to get you onto the cwm recovery version. And then yes, just select rom, theme, or anything else you want and all done. I currently have a folder on sd named 'flash' with subfolders for firmwares, kernals, themes, apps and other.
I just flash away anytime anywhere I like and if I'm not happy I just flash back. CWM also has a backup function which is literally a life saver. Titanium is good for apps but rom manager / cwm backs up everything. I've had problems before and from cwm recovery selected restore and all good again.
For anyone with a Telstra SGS i suggest having a look at this ROM http://forum.xda-developers.com/showthread.php?t=907149.
Been using it for about 2 weeks now and seems to give reasonable battery life compaired to stock Telstra ROM.
Can somebody explain to me why is Wi-Fi connection so unreliable? I've recently upgraded to 2.2. release, which made the Wi-Fi connectivity worse. It got that bad that I can't connect to the Wi-Fi network in my office, but my other phone (iPhone 4) deosn't have any issues connecting. Samsung has spent too much developing their 3d TV's instead improving their mobile phones quality.
I tried looking around, but couldn't find the stock recovery for the P3100. It's available only for the P3113. Could someone with the stock tab upload the recovery here, please? To flash via Odin, obviously.
Thanks!
PS if a thread like this already exists, please link me to it and then delete this thread!
Sent from my Desire HD
You can download from samfirmware a full rom for p3100 ,extract it with winrar ,and inside you'll fin stock recovery.img.If the extension of the rom it's .tar.md5 ,just remove .md5 form extension,and you'll be able to extract it with winrar without a problem.Cheers!
If you have the stock kernel (boot.img) and stock ROM (fully stock, no files deleted), stock recovery should flash itself back to your phone every time the device boots up.
No, I don't, which is why I wanted the recovery!
Sent from my GT-P3100
athiskir said:
No, I don't, which is why I wanted the recovery!
Sent from my GT-P3100
Click to expand...
Click to collapse
I can also use mobile ODIN free or PAID and flash only the stock recovery, if that what you want.
viasat said:
You can download from samfirmware a full rom for p3100 ,extract it with winrar ,and inside you'll fin stock recovery.img.If the extension of the rom it's .tar.md5 ,just remove .md5 form extension,and you'll be able to extract it with winrar without a problem.Cheers!
Click to expand...
Click to collapse
Hi, im neew here.
I got the recovery.img from sammobile, what can i do to remove cwm?? i have to install this or move it to my android?
After rooting the official rom,I'm always removing cwm recovery by flashing official recovery.img using Mobile Odin.I you don't want to buy Mobile Odin Pro from Play,you can use the free version from here http://forum.xda-developers.com/showthread.php?t=1347899
Cheers!
Hello,
I just have upgrading my i9505 to 4.4.2 I9505XXUFNA5 KitKat.
I tried to root my 9505 after upgrade with CF-root "jfltexx", but after i got PASS on Odin, i opened SuperSU and i got message "There is no SU binary installed and SuperSU cannot install it. this is a problem!!"
How to solve this problem? Is there any upgrade to CF-root jfltexx?
boss-619 said:
Hello,
I just have upgrading my i9505 to 4.4.2 I9505XXUFNA5 KitKat.
I tried to root my 9505 after upgrade with CF-root "jfltexx", but after i got PASS on Odin, i opened SuperSU and i got message "There is no SU binary installed and SuperSU cannot install it. this is a problem!!"
How to solve this problem? Is there any upgrade to CF-root jfltexx?
Click to expand...
Click to collapse
Remember after flashing Root/custom your warranty is now void.
Flash a Custom recovery iE: Philz ,CWM, TWRP and download a Su-Binary and put it in your sdcard ,and boot into recovery mode. and flash SuperSU Binary .Done
Repulsa said:
Remember after flashing Root/custom your warranty is now void.
Flash a Custom recovery iE: Philz ,CWM, TWRP and download a Su-Binary and put it in your sdcard ,and boot into recovery mode. and flash SuperSU Binary .Done
Click to expand...
Click to collapse
I know, i don't care about warranty!
and Why should i flash a custom rom and flash SuperSU???
I already flash CF-Root via Odin and it doesn't work!!!!
boss-619 said:
I know, i don't care about warranty!
and Why should i flash a custom rom and flash SuperSU???
I already flash CF-Root via Odin and it doesn't work!!!!
Click to expand...
Click to collapse
Yea i dont care either.. Im here to help you. and i said flash a Custom recovery not a ROM :silly:. that file is a su binary that your missing either you reflash CF-Auto-Root-jflte-jfltexx-gti9505.zip and to see if its gonna get fix or not..if your problem still persist i hope someone can help you. Have a nice day
Repulsa said:
Remember after flashing Root/custom your warranty is now void.
Flash a Custom recovery iE: Philz ,CWM, TWRP and download a Su-Binary and put it in your sdcard ,and boot into recovery mode. and flash SuperSU Binary .Done
Click to expand...
Click to collapse
Repulsa said:
Yea i dont care either.. Im here to help you. and i said flash a Custom recovery not a ROM :silly:. that file is a su binary that your missing either you reflash CF-Auto-Root-jflte-jfltexx-gti9505.zip and to see if its gonna get fix or not..if your problem still persist i hope someone can help you. Have a nice day
Click to expand...
Click to collapse
I tried to reflash the CF-Root again, and it doesn't work??!
Maybe jfltexx doesn't support 4.4.2 android KitKat!
you must to flash the super su update zip for the new 4.4.2 Roms my friend
If you have installed the CF autoroot you must to flash philz Revovery or CWM
and then flash this zip Link
Nininho1995 said:
you must to flash the super su update zip for the new 4.4.2 Roms my friend
If you have installed the CF autoroot you must to flash philz Revovery or CWM
and then flash this zip Link
Click to expand...
Click to collapse
I also did that, and seems that is rooted, but when i go to ES file explorer to open root directory, it says it's empty!!!!
I cannot view root directory or open it???!!! something is missing in CF Root "jfltexx"
boss-619 said:
I also did that, and seems that is rooted, but when i go to ES file explorer to open root directory, it says it's empty!!!!
I cannot view root directory or open it???!!! something is missing in CF Root "jfltexx"
Click to expand...
Click to collapse
LMFAO. That directory is *always* empty and has nothing to do with being rooted or not :good:
boss-619 said:
I also did that, and seems that is rooted, but when i go to ES file explorer to open root directory, it says it's empty!!!!
I cannot view root directory or open it???!!! something is missing in CF Root "jfltexx"
Click to expand...
Click to collapse
Download this and flash it through CWM (or any custom recovery you're using) After that, update the app from the play store. (And update the binary if requested to.)
Smack that Thanks button if I helped!
KitKat came in on my OmniROM, running on my Note 2.
Sent from a small country called Singapore.
P.S. Time for school, not much time for XDA
Nininho1995 said:
you must to flash the super su update zip for the new 4.4.2 Roms my friend
If you have installed the CF autoroot you must to flash philz Revovery or CWM
and then flash this zip Link
Click to expand...
Click to collapse
Pfeffernuss said:
LMFAO. That directory is *always* empty and has nothing to do with being rooted or not :good:
Click to expand...
Click to collapse
No, it should be able to open!
boss-619 said:
No, it should be able to open!
Click to expand...
Click to collapse
Yes, but it's empty.
Hi I'm wondering if you can help me- I tried to follow az_biker's instructions about rooting installing recovery and flashing ROMs. I'm on NC4, rooted with towelroot, installed busybox, safestrap 3.75, root checker and Chainfire's SuperSu. I was unable to flash or install baja rom. Then in step 8- and in Odin, downloading to target- getting the phone recognized in the hilighted 'ID-COM' and one line in the messages 'ADDED!'. When hitting 'AD' to find the MJE tar file, it was nowhere to be founnd. I even put the file on my desktop but for some reason Odin just dosent see it. I did finally install the Baja 4th of July version since this was a prior step and downloaded it which could only be found in the downloads. In Safestrap I found the zip file and did another wipe, hit back, advanced, wiped all but sd card then installed it. In the process it did say 'can't find MD5 file and continued and did finish- 'installed successfully'. When trying to reboot system, the phone goes dead. The only thing I can do at this point is remove the battery and boot into recovery but system will not boot. I'd gladly send a donation to anyone that could shed some light this and tell me what to do, I'd greatly appreciate it!
tjmethod said:
Hi I'm wondering if you can help me- I tried to follow az_biker's instructions about rooting installing recovery and flashing ROMs. I'm on NC4, rooted with towelroot, installed busybox, safestrap 3.75, root checker and Chainfire's SuperSu. I was unable to flash or install baja rom. Then in step 8- and in Odin, downloading to target- getting the phone recognized in the hilighted 'ID-COM' and one line in the messages 'ADDED!'. When hitting 'AD' to find the MJE tar file, it was nowhere to be founnd. I even put the file on my desktop but for some reason Odin just dosent see it. I did finally install the Baja 4th of July version since this was a prior step and downloaded it which could only be found in the downloads. In Safestrap I found the zip file and did another wipe, hit back, advanced, wiped all but sd card then installed it. In the process it did say 'can't find MD5 file and continued and did finish- 'installed successfully'. When trying to reboot system, the phone goes dead. The only thing I can do at this point is remove the battery and boot into recovery but system will not boot. I'd gladly send a donation to anyone that could shed some light this and tell me what to do, I'd greatly appreciate it!
Click to expand...
Click to collapse
Were you on NC4 initially and rooted it or were you on MJE and upgraded to NC4? Are you unzipping the file before you try looking for it with Odin and are you using the AP section in Odin? Have you tried booting into the stock recovery and doing a factory reset?
airmaxx23 said:
Were you on NC4 initially and rooted it or were you on MJE and upgraded to NC4? Are you unzipping the file before you try looking for it with Odin and are you using the AP section in Odin? Have you tried booting into the stock recovery and doing a factory reset?
Click to expand...
Click to collapse
Hi thanks for posting- I bought the phone and within 2 weeks the OTA for kitkat came out so I took it. The baseband is NC4 now and I dont know what it was before kk upgrade. Yes using the AP button in Odin. The title of the MJE tar file is this:
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
This file does not seem to be zipped up and it has a blank piece of paper for an icon. .
I now see where the md5 came from. I cannot do anything but remove battery and put back in then it only boots into safestrap. Another mistake I made was not making a backup of the stock rom. Any suggestions?
tjmethod said:
Hi thanks for posting- I bought the phone and within 2 weeks the OTA for kitkat came out so I took it. The baseband is NC4 now and I dont know what it was before kk upgrade. Yes using the AP button in Odin. The title of the MJE tar file is this:
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
This file does not seem to be zipped up and it has a blank piece of paper for an icon. .
I now see where the md5 came from. I cannot do anything but remove battery and put back in then it only boots into safestrap. Another mistake I made was not making a backup of the stock rom. Any suggestions?
Click to expand...
Click to collapse
You can't use the MJE tar file since you took the OTA, you would need the NC4 full tar file. You should be able to boot into download mode from SS or by turning the device off and holding down Home, then Volume down, then Power. You can try doing a factory reset in the stock recovery by holding down Home, Volume up and Power.
airmaxx23 said:
You can't use the MJE tar file since you took the OTA, you would need the NC4 full tar file. You should be able to boot into download mode from SS or by turning the device off and holding down Home, then Volume down, then Power. You can try doing a factory reset in the stock recovery by holding down Home, Volume up and Power.
Click to expand...
Click to collapse
Ok, I downloaded 7zip and am extracting that file. it finished and I had hit vol dwn, power and menu button and when the first screen came up, I hit vol up and am currently in download mode 'Downloading... Do not turn off target'. After the file was extracted into the same name with a manilla file folder icon which was now then recognized by Odin in the AP an advanced on its own and is currently at this state- (screenshot) I attached- let me know if you can see it?
tjmethod said:
Ok, I downloaded 7zip and am extracting that file. it finished and I had hit vol dwn, power and menu button and when the first screen came up, I hit vol up and am currently in download mode 'Downloading... Do not turn off target'. After the file was extracted into the same name with a manilla file folder icon which was now then recognized by Odin in the AP an advanced on its own and is currently at this state- (screenshot) I attached- let me know if you can see it?
Click to expand...
Click to collapse
Hi again I am just reading what you your reply was after I already inserted on downloaded the MJE. So at this point I should boot into stock recovery. How would I remove the MJE tar file?. I can find the NC4 tar then run Odin again with this file?
tjmethod said:
Hi again I am just reading what you your reply was after I already inserted on downloaded the MJE. So at this point I should boot into stock recovery. How would I remove the MJE tar file?. I can find the NC4 tar then run Odin again with this file?
Click to expand...
Click to collapse
If you haven't installed theh MJE file, or actually even if you have, just boot back into download mode and flash the NC4 file in Odin.
airmaxx23 said:
If you haven't installed theh MJE file, or actually even if you have, just boot back into download mode and flash the NC4 file in Odin.
Click to expand...
Click to collapse
Thank you I am downloading it as we speak. Will I be able to boot up in baja rom or only stock?. Notorious 3 had told me originally "yes you can install the NC2 tar as these instruction are specifically for users who are on NC4 OTA". Doe he mean to install custom roms or can I install or flash custom roms with the full NC4 tar?. Ireally appreciate your help-
tjmethod said:
Thank you I am downloading it as we speak. Will I be able to boot up in baja rom or only stock?. Notorious 3 had told me originally "yes you can install the NC2 tar as these instruction are specifically for users who are on NC4 OTA". Doe he mean to install custom roms or can I install or flash custom roms with the full NC4 tar?. Ireally appreciate your help-
Click to expand...
Click to collapse
Once you boot into the stock NC4 ROM root it with TowelRoot, install SU, BusyBox and SS 3.75. Boot into SS and install BAJA ROM then before rebooting go into download mode through SS and flash the file in the link below.
http://www.androidfilehost.com/?fid=23501681358551261
airmaxx23 said:
Once you boot into the stock NC4 ROM root it with TowelRoot, install SU, BusyBox and SS 3.75. Boot into SS and install BAJA ROM then before rebooting go into download mode through SS and flash the file in the link below.
http://www.androidfilehost.com/?fid=23501681358551261
Click to expand...
Click to collapse
Thanks once again, my only other question is how to find baja rom at that point?- go to xda and download it to the phone?
tjmethod said:
Thanks once again, my only other question is how to find baja rom at that point?- go to xda and download it to the phone?
Click to expand...
Click to collapse
Yeah, just download it and when you boot into SS browse to the download folder and it will be there.
airmaxx23 said:
Yeah, just download it and when you boot into SS browse to the download folder and it will be there.
Click to expand...
Click to collapse
Thanks alot! the phone booting up
tjmethod said:
Thanks alot! the phone booting up
Click to expand...
Click to collapse
Great, I'm glad we got it working. Have fun!! Don't worry about the donation, just hit the thanks button a few times. :laugh:
airmaxx23 said:
Great, I'm glad we got it working. Have fun!! Don't worry about the donation, just hit the thanks button a few times. :laugh:
Click to expand...
Click to collapse
I really do appreciate it, I ended up flashing the firmware file through Odin and installing that way then pulling the battery and it booted into baja but weather, email, google etc. all stopped working errors constantly. Any idea how to fix?. I take it you're a developer? Anyway, I'm TJ
tjmethod said:
I really do appreciate it, I ended up flashing the firmware file through Odin and installing that way then pulling the battery and it booted into baja but weather, email, google etc. all stopped working errors constantly. Any idea how to fix?. I take it you're a developer? Anyway, I'm TJ
Click to expand...
Click to collapse
Did you wipe data, cache and dalvik before installing Baja? I'm not a developer, I just enjoy messing around with my devices and I like helping people out when I can.
airmaxx23 said:
I'm not a developer, I just enjoy messing around with my devices and I like helping people out when I can.
Click to expand...
Click to collapse
It is so nice to see the decent and patient people that are willing to help those that ask for it.
airmaxx23 said:
Did you wipe data, cache and dalvik before installing Baja? I'm not a developer, I just enjoy messing around with my devices and I like helping people out when I can.
Click to expand...
Click to collapse
Hi no hadn't wiped all that since doing a factory reset days ago but I will try that- should I redownload the rom to install? So what's you name and what devices do you have? Everything I have is Samsung
kinstre11 said:
It is so nice to see the decent and patient people that are willing to help those that ask for it.
Click to expand...
Click to collapse
Right on!
tjmethod said:
Hi no hadn't wiped all that since doing a factory reset days ago but I will try that- should I redownload the rom to install? So what's you name and what devices do you have? Everything I have is Samsung
Click to expand...
Click to collapse
You don't need to redownload it. You should wipe everything but the Micro SDcard whenever you install a new ROM. You won't have the errors once you wipe everything and install the ROM again.
airmaxx23 said:
You don't need to redownload it. You should wipe everything but the Micro SDcard whenever you install a new ROM. You won't have the errors once you wipe everything and install the ROM again.
Click to expand...
Click to collapse
Hi again all is worki g fine except lost alot of apps & widgets- voicemail, samsung hub etc., just trying to figure getting it all back on. I notice baja is faster also can't find how to increase battery but I will have to play with it. So what rom do you use?
Can anyone give me the stock recovery for N900 4.4.2 please? My phone is rooted but used fake system stauts in wanam xpose. I can download OTA upgrade but failed to install the update. So i guess it must be bcoz of CWM. Thank you so much in advance.
satslu said:
Can anyone give me the stock recovery for N900 4.4.2 please? My phone is rooted but used fake system stauts in wanam xpose. I can download OTA upgrade but failed to install the update. So i guess it must be bcoz of CWM. Thank you so much in advance.
Click to expand...
Click to collapse
I have the same problem before. And I have flash the stock firmware via Odin. No data will be lost.
If you are going to flash the stock recovery, you'd better flash the stock firmware
You can also download the stock firmware and extract the stock recovery yourself.
Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser' to find and download the stock firmware for your device.
vndnguyen said:
You can also download the stock firmware and extract the stock recovery yourself.
Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser' to find and download the stock firmware for your device.
Click to expand...
Click to collapse
Oh.really. I didnt realize it at all. Current firmware is the one that I downloaded and flashed it from odin. Can u guide me how to extract and flash it bcoz I am afraid I will have bootloop or brick.?
Yes I know your application and this is a must have for SAMSUNG.? I wait for you before i proceed anything.
The firmware file is a TAR archive and you can extract it with WinRAR.
You will get recovery.img file and it can be flash via Odin.
But it's easier if you flash full stock firmware. No data will be lost.
vndnguyen said:
The firmware file is a TAR archive and you can extract it with WinRAR.
You will get recovery.img file and it can be flash via Odin.
But it's easier if you flash full stock firmware. No data will be lost.
Click to expand...
Click to collapse
Do i need to repack recovery.img into tar.md5? I can add recovery.img into zip archive and then rename into tar.md5? is it a right method? I have modified something in system folder which i have to flash through CWM. So after i flash stock firmware, im not going to lose my data but my modification will be lost.
I hope u understand my problem.
satslu said:
Do i need to repack recovery.img into tar.md5? I can add recovery.img into zip archive and then rename into tar.md5? is it a right method? I have modified something in system folder which i have to flash through CWM. So after i flash stock firmware, im not going to lose my data but my modification will be lost.
I hope u understand my problem.
Click to expand...
Click to collapse
Ok here is some stock recovery for your convenience: http://forum.xda-developers.com/showthread.php?p=50322367#post50322367
If you want to make your own TAR, here is a tool: http://forum.xda-developers.com/showpost.php?p=42393470&postcount=2
Wow..thank you so much. I keep looking for them until it gave me headache.