Related
The probem:
USB Mass Storage not working in Recovery. I tried everything, reflashing different recovery but its not working, it doesn't give an error message. When card is not inside however it does complain. SdCard is fine because I can flash zips that are on it. Tested on both windows and ubuntu. tried another card as well
USB Mount doesn't work in CM7.2 or any rom or nand restore i've done recently. I had Insomnia at some point, then inferno, then cm 7.1, none of these restores work. Again here no errors, I do not even see the sign for usb detection. usb debugging is enabled/disabled no difference. phone however still charges though.
I'm on a trip right now, but I've not had the chance yet to get another usb cable but the two I have dont work.
katsumeiyo said:
The probem:
USB Mass Storage not working in Recovery. I tried everything, reflashing different recovery but its not working, it doesn't give an error message. When card is not inside however it does complain. SdCard is fine because I can flash zips that are on it. Tested on both windows and ubuntu. tried another card as well
USB Mount doesn't work in CM7.2 or any rom or nand restore i've done recently. I had Insomnia at some point, then inferno, then cm 7.1, none of these restores work. Again here no errors, I do not even see the sign for usb detection. usb debugging is enabled/disabled no difference. phone however still charges though.
I'm on a trip right now, but I've not had the chance yet to get another usb cable but the two I have dont work.
Click to expand...
Click to collapse
Its either your USB cable or your phone USB jack mine does the same thing I have to wiggle it to get a good connection cuz my USB cable sucks cuz with others it recognizes it right away.
...Awesome... said:
Its either your USB cable or your phone USB jack mine does the same thing I have to wiggle it to get a good connection cuz my USB cable sucks cuz with others it recognizes it right away.
Click to expand...
Click to collapse
He has tried two cables, so I would tend to lean toward the port.
Sent from my HTC Glacier using XDA
i am in the same boat. looks like my charging port is bad. anyway to replace the charging port? i am not good with soldering
it's not ur usb port
it's htc.. htc devices doesn't support usb host feature.
If you have a rom and kernal that do support usb host then try powering the usb as the htc devices do not provide power out.. use usb Y cable
tempuser2005 said:
it's htc.. htc devices doesn't support usb host feature.
If you have a rom and kernal that do support usb host then try powering the usb as the htc devices do not provide power out.. use usb Y cable
Click to expand...
Click to collapse
What? He isn't trying to host the connection. He is trying to use his phone as a USB mass storage device.
Where did you get USB host from in his questions?
Sent from my HTC Glacier using XDA
Hi all,
I am having the same problem, except perhaps with a different cause. My user account on Windows 7 became corrupt and I can no longer log in, so I had to create a new one.
On the new account, my myTouch 4G is not recognized for mass storage/disk drive mode via USB. The USB cable does work, the port is okay, and I've used both with other devices. The myTouch shows as charging when connected to the computer. I have uninstalled and reinstalled all of the myTouch drivers, restarted computer and phone, to no avail.
When it is connected in USB, it shows as generic "Drive F" and is inaccessible. When I check properties it says mytouch4g. When I check "Devices" it is recognized as portable storage. I have tried with USB debugging on and off, and have set "connected to computer" mode to disk drive.
Any thoughts? I thought possibly loading the generic ADB driver again might help, but I cannot get to the stage where I can force it to load that driver instead of the HTC one.
I want to flash roms to my note3, since yesterday i tried everything. problem is i cant use my usb cables to transfer data to my phone. device is not recognized by computers. i tried 5-6 different usb cables some of them work with other devices, tried to remove drivers and reinstall them, tried mac,linux, windows 8.1 device is not recognized. even in download mode when i plug usb cable it charges only. i crawled through google found some kernel related problems which i cant do anything about it without working usb cable, i think my usb port might be broken somehow.i don't wanna buy usb port flex cable if there are any other solutions.
sercankd said:
I want to flash roms to my note3, since yesterday i tried everything. problem is i cant use my usb cables to transfer data to my phone. device is not recognized by computers. i tried 5-6 different usb cables some of them work with other devices, tried to remove drivers and reinstall them, tried mac,linux, windows 8.1 device is not recognized. even in download mode when i plug usb cable it charges only. i crawled through google found some kernel related problems which i cant do anything about it without working usb cable, i think my usb port might be broken somehow.i don't wanna buy usb port flex cable if there are any other solutions.
Click to expand...
Click to collapse
As you said the cables work for other phones so they're not usb3/original note 3 cable?
Sent from my SM-N920C
Rosli59564 said:
As you said the cables work for other phones so they're not usb3/original note 3 cable?
Sent from my SM-N920C
Click to expand...
Click to collapse
one of them is note 4 original cable, also i have note 3 original cable all of them wont work
MicroUSB connector may be damaged. You should be able to use adapter to connect the MicroSDHC card to a PC, copy the new ROM etc. to the card and install from there.
dutch55 said:
MicroUSB connector may be damaged. You should be able to use adapter to connect the MicroSDHC card to a PC, copy the new ROM etc. to the card and install from there.
Click to expand...
Click to collapse
I think that he would not be able to install a new ROM from the card, as he would need a custom recovery that in this case can't be installed, because the phone is not detected by the computer.
To anyone faces similar problem, i have replaced usb charging port and problem solved. its very easy to do.
sercankd said:
To anyone faces similar problem, i have replaced usb charging port and problem solved. its very easy to do.
Click to expand...
Click to collapse
Glad you were able to replace the USB port on the phone. regarding being able to do the first install of a rom without a PC, if you can get root (in the case of an AT&T Note3, with Towelroot), then I believe you can use MobileODIN to install ROMs without a PC.
I had a different phone, a Samsung Galaxy S with a damaged USB port with no data connectivity that a repair shop was unable to repair it.
Hi, I tried to search in Help Forum about my issue, but did not get a thread on the same.
hence starting a new topic, please help me.
My phone doesn't get recognized on PC or Laptop via usb. So I need to root it via app or any method used with Phone.
If there is any, let me know.
I tried KingRoot and Root Zenfone app, didnt worked.
AFAIK, you can't do that. You need to use computer to root it. Is your usb port damaged? Try clean it up first. Or sometimes it could be just Windows driver issue.
kopter36 said:
AFAIK, you can't do that. You need to use computer to root it. Is your usb port damaged? Try clean it up first. Or sometimes it could be just Windows driver issue.
Click to expand...
Click to collapse
Thank you for your reply, USB port of my device is fine; i can see charging is happening. I tried several ports of Lappy, it says USB not recognized.
sandy7874 said:
Thank you for your reply, USB port of my device is fine; i can see charging is happening. I tried several ports of Lappy, it says USB not recognized.
Click to expand...
Click to collapse
Try to reinstall drivers, or you can install Asus PCLink (that automatically installs Intel USB drivers).
sandy7874 said:
Thank you for your reply, USB port of my device is fine; i can see charging is happening. I tried several ports of Lappy, it says USB not recognized.
Click to expand...
Click to collapse
Did you tried plugging in to another computer to see if it works? Try using different cable that certified for data transfer. Make sure you check "mtp" as your preferred connection method. If computer still says "USB device not recognized", probably your phone usb port might have broken solder connection.
kopter36 said:
Did you tried plugging in to another computer to see if it works? Try using different cable that certified for data transfer. Make sure you check "mtp" as your preferred connection method. If computer still says "USB device not recognized", probably your phone usb port might have broken solder connection.
Click to expand...
Click to collapse
I tried Asus PC link, and it didn't recognized my Device. Seems there is a problem.
sandy7874 said:
I tried Asus PC link, and it didn't recognized my Device. Seems there is a problem.
Click to expand...
Click to collapse
I guess that might be hardware issue as you already installed Asus PCLink on your computer. Did you already tried fastboot mode? Try going into droidboot menu and plug your phone. If it shows up in device manager, then you are all good.
However if it does not work, and if you have a good eyes and basic soldering skill, you might want to disassemble your phone and inspect the USB port solder connections. You might have to replace the bottom board too if you accidentally fried any caps on it.
You can't root your zen5 without pc......
There are 2 methods
sandy7874 said:
Hi, I tried to search in Help Forum about my issue, but did not get a thread on the same.
hence starting a new topic, please help me.
My phone doesn't get recognized on PC or Laptop via usb. So I need to root it via app or any method used with Phone.
If there is any, let me know.
I tried KingRoot and Root Zenfone app, didnt worked.
Click to expand...
Click to collapse
Hey sandy, first check your Android Version. If it is 4.3 or lower then you can root without pc. But if you have an android version higher than that then you will need a pc.
To root without pc:
You can do a simple search on youtube as I already upgraded my Android Version
To root with pc:
Use a reliable tutorial I myself used on youtube:
As I am a new member i cannot give the link but the name of the youtuber is Silicon Rodent
Best of luck:good:
Hi guys,
Im having a hard time. Hope u guys can help me.
I wanted to start from scratch so i wiped everything, inclusive internal storage within twrp .
So far no problem, but when i tried to connect my OP5 to PC my PC doesnt recognize it. I guess its something with my pc.
Why doesnt my pc recognize my OP5? I cannot do anything right now.
In device manager i cannot find my op5.
Praying for help
Langenl said:
Hi guys,
Im having a hard time. Hope u guys can help me.
I wanted to start from scratch so i wiped everything, inclusive internal storage within twrp .
So far no problem, but when i tried to connect my OP5 to PC my PC doesnt recognize it. I guess its something with my pc.
Why doesnt my pc recognize my OP5? I cannot do anything right now.
In device manager i cannot find my op5.
Praying for help
Click to expand...
Click to collapse
Have a look at here https://forum.xda-developers.com/oneplus-5/help/fastboot-wont-recognize-device-t3866942
strongst said:
Have a look at here https://forum.xda-developers.com/oneplus-5/help/fastboot-wont-recognize-device-t3866942
Click to expand...
Click to collapse
The drivers are installed. When i plug my OP5 in the PC i dont hear or see anything.
The problem is i cannot go into the OS because i have no OS to change USB debugging mode.
Also tried different usb type c cable's
adb doesnt recognize
fastboot doesnt recognize
pc doesnt recognize
Langenl said:
The drivers are installed. When i plug my OP5 in the PC i dont hear or see anything.
The problem is i cannot go into the OS because i have no OS to change USB debugging mode.
Also tried different usb type c cable's
Click to expand...
Click to collapse
You should try to go to fastboot and connect it since it loads low level drivers. Have you read the linked post and tried the steps?
strongst said:
You should try to go to fastboot and connect it since it loads low level drivers. Have you read the linked post and tried the steps?
Click to expand...
Click to collapse
I've editted my response. fastboot and adb doesnt recognize aswell.
Langenl said:
I've editted my response. fastboot and adb doesnt recognize aswell.
Click to expand...
Click to collapse
Is it possible that my connector is broken? Phone is charging though….
I'm really desperate atm ;(
Langenl said:
Is it possible that my connector is broken? Phone is charging though….
I'm really desperate atm ;(
Click to expand...
Click to collapse
Sure, that's possible, you can try to mount an usb otg stick or similar otg within twrp.
strongst said:
Sure, that's possible, you can try to mount an usb otg stick or similar otg within twrp.
Click to expand...
Click to collapse
Really hope thats not the case.
I simply cant check OTG within Twrp->mount when connected to pc. Aint got another OTG device. I hope there is some other way i can fix my problem because i dont want to spend money on repairing my connector. Thanks for your effort!
Langenl said:
Really hope thats not the case.
I simply cant check OTG within Twrp->mount when connected to pc. Aint got another OTG device. I hope there is some other way i can fix my problem because i dont want to spend money on repairing my connector. Thanks for your effort!
Click to expand...
Click to collapse
OTG won't work if connected to a PC, only storage and controller devices, no clients. you need a USB stick or similar, please do some research about usb OTG if it's not clear
strongst said:
OTG won't work if connected to a PC, only storage and controller devices, no clients. you need a USB stick or similar, please do some research about usb OTG if it's not clear
Click to expand...
Click to collapse
Sorry misunderstanding. Anyways...i just borrowed a USB stick wich support otg but still the same problem. cant select otg.
Langenl said:
Sorry misunderstanding. Anyways...i just borrowed a USB stick wich support otg but still the same problem. cant select otg.
Click to expand...
Click to collapse
If you have a chance to simply try it on another PC, do it. Otherwise Firewall, drivers etc should be your next focus.
Langenl said:
Sorry misunderstanding. Anyways...i just borrowed a USB stick wich support otg but still the same problem. cant select otg.
Click to expand...
Click to collapse
Pushed the USB stick a litthe further and it works. My connector isnt the best anymore but im glad it works. Massive thank you!
Langenl said:
Pushed the USB stick a litthe further and it works. My connector isnt the best anymore but im glad it works. Massive thank you!
Click to expand...
Click to collapse
Glad you got it working now! Maybe you can edit the tread title and add [SOLVED] at the beginning to help others solve their issues
I am having the same problem: no mtp, no adb, no fastboot, no otg
The phone charges with dash without any problems. I already tried 3 different computers (win 10 and Linux mint). Cant think of anything else than a Hardware issue of my USB Port.
My biggest problem is not getting adb, so i can't install twrp at the moment.
Are there any recommendations for me?
derschnelle said:
I am having the same problem: no mtp, no adb, no fastboot, no otg
The phone charges with dash without any problems. I already tried 3 different computers (win 10 and Linux mint). Cant think of anything else than a Hardware issue of my USB Port.
My biggest problem is not getting adb, so i can't install twrp at the moment.
Are there any recommendations for me?
Click to expand...
Click to collapse
I hope you read the thread already?
strongst said:
I hope you read the thread already?
Click to expand...
Click to collapse
Yes I did and the difference between OP and me is the non functional OTG.
I just thought you guys might have another ace up your sleeves.
derschnelle said:
Yes I did and the difference between OP and me is the non functional OTG.
I just thought you guys might have another ace up your sleeves.
Click to expand...
Click to collapse
You need a working USB port,if that won't be fixed, nothing can be done...
strongst said:
You need a working USB port,if that won't be fixed, nothing can be done...
Click to expand...
Click to collapse
I'm not really sure, whether my port is broken or not. Shortly after I posted here, I found out, that I missed the Standard USB-Protocol-Setting in developer options (it was checked as charge). So I changed it and voila, USB worked!
But then I tried to install twrp (which was successful at first, but seems to be overwritten again by stock recovery) and now I can't get my device to connect again. I tried to disconnect, connect with other PCs, change the usb-debugging and standard usb-protocoll, connect in fastboot-mode, nothing works.
derschnelle said:
I'm not really sure, whether my port is broken or not. Shortly after I posted here, I found out, that I missed the Standard USB-Protocol-Setting in developer options (it was checked as charge). So I changed it and voila, USB worked!
But then I tried to install twrp (which was successful at first, but seems to be overwritten again by stock recovery) and now I can't get my device to connect again. I tried to disconnect, connect with other PCs, change the usb-debugging and standard usb-protocoll, connect in fastboot-mode, nothing works.
Click to expand...
Click to collapse
It's me again, I solved my problem!
When I tried to connect yesterday I noticed that my phone always charged and then immediately stopped charging again. It was charged to ~80% and didn't go any further. So I thought maybe the battery calibration is faulty, which can happen when you never fully charge. So I emptied the battery, charged it while phone off and tadaaa everything works.
It seems my phone interrupted the usb connection because it tried to charge my phone over 80% and the controller stopped it.
derschnelle said:
It's me again, I solved my problem!
When I tried to connect yesterday I noticed that my phone always charged and then immediately stopped charging again. It was charged to ~80% and didn't go any further. So I thought maybe the battery calibration is faulty, which can happen when you never fully charge. So I emptied the battery, charged it while phone off and tadaaa everything works.
It seems my phone interrupted the usb connection because it tried to charge my phone over 80% and the controller stopped it.
Click to expand...
Click to collapse
Very interesting but it might be possible. Thanks for posting the solution
I have a g930v that I need to get U or T firmware on for wifi calling. Problem is the USB is apparently bad. Charges and fast-charges just fine. But when connected to the pc it shows the device is unreconized. Happens on multiple pc, port, and cable combinations, all ov which my Tab S2 will connect with. Is there anyway to flash through ADBlink terminal or from SD card without using Odin or get the PC to reconize the phone (doubt full if the USB port is bad)? Tripping Knox doesn't bother me as I don't use Samsung Pay and the phone is clearly out of warranty and it will be used until it dies rather then traded it. I have file sharing turned on, adb dubugging is on, OEM unlock is on, USB configuration is set to MTP, verifify apps via USB is off. If I manually update the Microsoft generic driver with the Samsung driver I get Code 29 so I now the phone isn't shaking hands with the PC. Any thoughts would be appreciated. Thanks.
Venomous Duck said:
I have a g930v that I need to get U or T firmware on for wifi calling. Problem is the USB is apparently bad. Charges and fast-charges just fine. But when connected to the pc it shows the device is unreconized. Happens on multiple pc, port, and cable combinations, all ov which my Tab S2 will connect with. Is there anyway to flash through ADBlink terminal or from SD card without using Odin or get the PC to reconize the phone (doubt full if the USB port is bad)? Tripping Knox doesn't bother me as I don't use Samsung Pay and the phone is clearly out of warranty and it will be used until it dies rather then traded it. I have file sharing turned on, adb dubugging is on, OEM unlock is on, USB configuration is set to MTP, verifify apps via USB is off. If I manually update the Microsoft generic driver with the Samsung driver I get Code 29 so I now the phone isn't shaking hands with the PC. Any thoughts would be appreciated. Thanks.
Click to expand...
Click to collapse
either you have to change the USB chip on the system board or change the whole board, changing USB port/charging port wont fix this issues, and you can't flash without odin.
zfk110 said:
either you have to change the USB chip on the system board or change the whole board, changing USB port/charging port wont fix this issues, and you can't flash without odin.
Click to expand...
Click to collapse
Thanks for the feedback. So it most likely the system board and not the charging board. Bummer. I am going to guess there is a 250% chance that it is a bga layout also. Looks like I'll suffer until I can grab a new phone. Thanks again.