My phone starts with a boot image and after that a MIUI boot animation appears. This all started after flashing one custom ROM and although I deleted it and flashed a new one with SP Flash the boot static picture still comes up.
How can I get rid of this "first" boot image? (The rom I installed was XGAMER Final. From here - http://www.movilesdualsim.com/tema/rom-xgamer-final.74465/)
kalina288 said:
My phone starts with a boot image and after that a MIUI boot animation appears. This all started after flashing one custom ROM and although I deleted it and flashed a new one with SP Flash the boot static picture still comes up.
How can I get rid of this "first" boot image? (The rom I installed was XGAMER Final. From here - http://www.movilesdualsim.com/tema/rom-xgamer-final.74465/)
Click to expand...
Click to collapse
There is a thread at movilesdualsim, but you will have to translate it.
SEE HERE
I haven't tried it as the bootscreen doesn't bother me.
That is exactly what I looked for! Thanks! Should I just flash that file under TWRP?
tkalli said:
There is a thread at movilesdualsim, but you will have to translate it.
SEE HERE
I haven't tried it as the bootscreen doesn't bother me.
Click to expand...
Click to collapse
Fantastic! Flashed the file in TWRP and I'm back to the stock logo!
tkalli said:
There is a thread at movilesdualsim, but you will have to translate it.
SEE HERE
I haven't tried it as the bootscreen doesn't bother me.
Click to expand...
Click to collapse
Getting 'error mounting /sdcard/.android_secure' after this
Hello I am new to flashing custom ROM's. Have flashed 2 devices successfully so tried it on my Micromax Canvas A116. Flashed MERE Rom, but wanted to go back to the stock ROM because I had wifi connection issues with MERE. Successfully restored nandroid backup, but my phone ended up with two boot animations. I used the file from moviedualsim because the uploader said it would work on any android phone. My phone now fails to read the internal SD card even in CWM recovery mode. I cannot do a factory reset from the phone backup & restore either. I tried to flash a stock Micromax A116 ROM, but still get the 'error mounting /sdcard/.android_secure' problem. Can anyone help please?
Related
I updated the Cyanogen Mod to 4.2.6, which worked fine. However, I then went into the Cyanogen Updater to get the Dark Dream 1.5 theme (not realizing that it is a theme for CM 4.2.5).
Now when I go to restart my phone, it gets hung up on the G1 screen. I can still get into the recovery screen, but it aborts everything I try, so I cannot wipe and re-install a ROM. I can get into the console, but I'm not sure what I'm looking for there. I can also get into the boot-loader screen, but am unable to do anything. HBoot Mode shows that there are a bunch of missing images and then pops me back to FastBoot screen. I am wondering if anyone can offer a suggestion on how to get my phone working again.
greatheight said:
I updated the Cyanogen Mod to 4.2.6, which worked fine. However, I then went into the Cyanogen Updater to get the Dark Dream 1.5 theme (not realizing that it is a theme for CM 4.2.5).
Now when I go to restart my phone, it gets hung up on the G1 screen. I can still get into the recovery screen, but it aborts everything I try, so I cannot wipe and re-install a ROM. I can get into the console, but I'm not sure what I'm looking for there. I can also get into the boot-loader screen, but am unable to do anything. HBoot Mode shows that there are a bunch of missing images and then pops me back to FastBoot screen. I am wondering if anyone can offer a suggestion on how to get my phone working again.
Click to expand...
Click to collapse
Use fastboot. You say you have it, this is what its for.
greatheight said:
I updated the Cyanogen Mod to 4.2.6, which worked fine. However, I then went into the Cyanogen Updater to get the Dark Dream 1.5 theme (not realizing that it is a theme for CM 4.2.5).
Now when I go to restart my phone, it gets hung up on the G1 screen. I can still get into the recovery screen, but it aborts everything I try, so I cannot wipe and re-install a ROM. I can get into the console, but I'm not sure what I'm looking for there. I can also get into the boot-loader screen, but am unable to do anything. HBoot Mode shows that there are a bunch of missing images and then pops me back to FastBoot screen. I am wondering if anyone can offer a suggestion on how to get my phone working again.
Click to expand...
Click to collapse
If you can into recovery you should be able to fix it by applying the cyanogen update again, if not use fastboot to restore a nandroid backup
jackslim said:
If you can into recovery you should be able to fix it by applying the cyanogen update again, if not use fastboot to restore a nandroid backup
Click to expand...
Click to collapse
While I can boot into the recovery mode, nothing seems to work. I try a wipe; comes up "Wipe Aborted." Same thing happens when I try to apply the update again.
I am going to see if I can re-install the cyanogen update from the console, as it seems like that is the only the working in the recovery mode. Unfortunately I don't have a nandroid backup to use. Thanks for the suggestion.
Which recovery image are you using?
jackslim said:
If you can into recovery you should be able to fix it by applying the cyanogen update again, if not use fastboot to restore a nandroid backup
Click to expand...
Click to collapse
greatheight said:
Unfortunately I don't have a nandroid backup to use.
Click to expand...
Click to collapse
You can download a nandroid image to fastboot of the official rom directly from HTC for the ADP1 phone. Download the Android 1.6 "System Image" from http://developer.htc.com/adp.html You may have to reinstall a custom recovery image afterwords. Then you can upgrade to any rom you want.
If you need to, you can download the latest recovery image here http://forum.xda-developers.com/showthread.php?t=566669 and install using the fastboot method.
testing567 said:
If you need to, you can download the latest recovery image here http://forum.xda-developers.com/showthread.php?t=566669 and install using the fastboot method.
Click to expand...
Click to collapse
It is likely this is the way I'll need to go. Thanks for all the help.
battery
the wipe could have been aborted b/c your battery is too low thats happened to me before just plug it in
What I did
1. Install unofficial CMod
2. Installed baconbits
Problem after bacon bits install on unofficial CM: i boot up the phone but it gave me an error/popup for every application i was running "google voice has encountered an error" "com.android has encountered an error" etc etc. endless popups to where i couldnt do anything on the phone other than locking and unlocking it.
what i tried to do to fix it:
3. Wipe data/factory reset
4. Tried applying Stock Recovery, thinking it would somehow help
current problem: stuck at HTC logo
please help! i just want to get it back up and running, any rom... rooted or not. i cant even get into the phone
Wow u really messed up.
Idk how to truly guide u out of this because it seems like u really don't know what ur doing. But your going to have to restore the phone. Read the thread about unrooting and returning to stock.
Also if I'm not mistaking you can fastboot flash system.img and data.img from pc10img.zip but as I said idk 100%
And flashing stock recovery is a no no because it can only read htc zips so it will block you out from flashing a new update.zip
Sent from my T-Mobile G2 using XDA App
Can you get into fastboot? Power the phone down and hold VolDown+Power.
Flashing baconbits over a non-official CM 6.1 was a mistake.... Baconbits is just an addon for a stock rom... CM 6.1 will have everything that baconbits has and more...
yes i can get into fastboot. problem is finding a htc signed rom... i think
If you are still S-OFF, you can flash clockwork mod recovery using fastboot and then just boot into recovery and install whatever rom...
http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-vision.img
dantheman_ said:
If you are still S-OFF, you can flash clockwork mod recovery using fastboot and then just boot into recovery and install whatever rom...
http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-vision.img
Click to expand...
Click to collapse
i love you, no homo
just out of curiousity, how did u install that cm rom? if u used clockwork like it required, all u had to do after u messed up flashing bacon, was wipe, and restore, or reflash the rom again. why did u flash a stock recovery?
Sent from my T-Mobile G2 using XDA App
did a wipe, stuck at htc logo. didnt know i could just flash the cm file with clockwork... thought i had to use the clockwork rom manager when the phone is booted up. flash stock recovery, for some reason, i dont know. cried for an hour. called tmobile, had them send me a replacement. now on the phone telling them to cancel first android phone so im a noob, be kind
Hi, I have rooted my phone and have s off. I've purchased rom manager and installed clockworkmod 3 and have backed up my phone.
When I try to flash the latest cyanogenMod Nightly I run into problems.
The phone gets wiped and updates and then it gets stuck at the Tmobile my touch splash screen. I've left it there for 10 minutes and still no cyanogen.
Any help is greatly appreciated
Thanks
Also I'm able to go back into recovery mode and restore my backup. So my phone is currently back in stock rom.
AnroidGuy2011 said:
Hi, I have rooted my phone and have s off. I've purchased rom manager and installed clockworkmod 3 and have backed up my phone.
When I try to flash the latest cyanogenMod Nightly I run into problems.
The phone gets wiped and updates and then it gets stuck at the Tmobile my touch splash screen. I've left it there for 10 minutes and still no cyanogen.
Any help is greatly appreciated
Thanks
Click to expand...
Click to collapse
If you successfully backed up your phone you are not using Clockwork ROM Recovery 3.x. It's a well known fact that that Recovery image has problems backing up Nandroids, or restoring them for that matter.
What color was the text when you were in recovery? Orange or green?
Its Green, so I have clockworkMod Recovery 2.5.1.2
So I need to update to the 3.x and I should be good?
Also to do a successfull back up of my nandroid I go to "backup and restore" and then select "backup"?
Thanks again for your help
AnroidGuy2011 said:
Its Green, so I have clockworkMod Recovery 2.5.1.2
So I need to update to the 3.x and I should be good?
Also to do a successfull back up of my nandroid I go to "backup and restore" and then select "backup"?
Thanks again for your help
Click to expand...
Click to collapse
if you are wanting CM7 yes you need to flash Clockwork ROM 3.0 via the Fastboot ADB commands. If you are wanting your phone to work you can flash of any of the other ROMS as of right now.
Clockwork ROM 3.x will not do nandroid back ups in it's current state. As Gingerbread comes closer to being an official or RC i'm sure they make sure it can do nandroids. nor will 2.x do nandroids of CM7. but to answer your question you are correct.
AnroidGuy2011 said:
Its Green, so I have clockworkMod Recovery 2.5.1.2
So I need to update to the 3.x and I should be good?
Also to do a successfull back up of my nandroid I go to "backup and restore" and then select "backup"?
Thanks again for your help
Click to expand...
Click to collapse
You are correct. See my thread here For the easiest way to install 3.0.0.5. And yes you can use Rom Manager for backups while on 2.5.1.2 but Rom Manager isnt compatable with flashing or backups for 3.0.0.5. You must use recovery.
TrueBlue_Drew said:
You are correct. See my thread here For the easiest way to install 3.0.0.5. And yes you can use Rom Manager for backups while on 2.5.1.2 but Rom Manager isnt compatable with flashing or backups for 3.0.0.5. You must use recovery.
Click to expand...
Click to collapse
This is good. Every time I try to answer a thread, you seem to beat me to it.
Thanks for the help
neidlinger said:
Clockwork ROM Recovery 3.x. It's a well known fact that that Recovery image has problems backing up Nandroids, or restoring them for that matter.
Click to expand...
Click to collapse
I rooted, made a back up with Clockwork ROM Recovery 3.x. , flashed CM7 and everything was fine. Then I flashed Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09 and when I unlocked the screen everything started force closing on a black screen. I locked the screen again, powered off and on again then it got stuck on the splash screen. I restored my back up and it's stuck on splash screen still. Then I tried to flash Kernel 2.6.32.21grankin010OC0v0.05 thinking my back-up might need a stock kernel. I am a super noob at this, I have successfully flashed roms to my tab before, but I've only been learning about this for about a month. I've been searching and searching but can't seem to find a solution. Am I screwed?
igrillem said:
I rooted, made a back up with Clockwork ROM Recovery 3.x. , flashed CM7 and everything was fine. Then I flashed Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09 and when I unlocked the screen everything started force closing on a black screen. I locked the screen again, powered off and on again then it got stuck on the splash screen. I restored my back up and it's stuck on splash screen still. Then I tried to flash Kernel 2.6.32.21grankin010OC0v0.05 thinking my back-up might need a stock kernel. I am a super noob at this, I have successfully flashed roms to my tab before, but I've only been learning about this for about a month. I've been searching and searching but can't seem to find a solution. Am I screwed?
Click to expand...
Click to collapse
IMHO opinion you are not screwed.
When flashing custom Kernels you need to have a program like SetCPU so you can govern the CPU speed. To fast of a speed or to slow of a speed and it will not boot correctly. You need to flash a different version of CM7 than you are using now, via the recovery screen. make sure to wipe the handset first. that should reset the Kernel to one that Zinx knows works with the phone.
As well i wouldn't recommend flashing kernels with Nightlies. They are unstable as it. and you need to make sure the kernel is compatible with Nightly you are using. And you can over clock them to 1.5Ghrzf from w/ in the ROM.
neidlinger said:
make sure to wipe the handset first. that should reset the Kernel to one that Zinx knows works with the phone.
Click to expand...
Click to collapse
HHHmmm I'm glad I never forget this step on the toilet! Thanks for the help!
As the title probably hints i cant seem to install stock mod i mean it says it is successful in TWRP but when i reboot it just stay on LG bootscreen
I have installed this rom before but then went to cyanogen which i didn't like as much as stock but can't seem to go back
currently running stock
Edited:
Managed to get back to stock via this method: http://forum.xda-developers.com/showthread.php?t=2432476
Just can't seem to install StockMOD :/
callum1986 said:
As the title probably hints i cant seem to install stock mod i mean it says it is successful in TWRP but when i reboot it just stay on LG bootscreen
I have installed this rom before but then went to cyanogen which i didn't like as much as stock but can't seem to go back
currently running stock
Edited:
Managed to get back to stock via this method: http://forum.xda-developers.com/showthread.php?t=2432476
Just can't seem to install StockMOD :/
Click to expand...
Click to collapse
Are you formatting? Try to format /system also then flash it. if all else fails go back the the stock rom. good luck
thenewak said:
Are you formatting? Try to format /system also then flash it. if all else fails go back the the stock rom. good luck
Click to expand...
Click to collapse
Thanks for reply yes i formatted and even reverted back to stock following the above link i even wiped phone where it deletes everything included sdcard but no matter what i try StockMOD rom wont boot when flashing
p.s. its the D802 i have
Well i assume i formatted as in wipe menu on TWRP i selected everything other than internal storage
callum1986 said:
Thanks for reply yes i formatted and even reverted back to stock following the above link i even wiped phone where it deletes everything included sdcard but no matter what i try StockMOD rom wont boot when flashing
p.s. its the D802 i have
Click to expand...
Click to collapse
Hmm that's weird, have you tried re flashing your recovery maybe something is broken there? have you tried other roms? If using TWRP try to update it or change to CWM or vice versa
Yea I updated to 2.6.3.4 which as of my knowledge is the latest
Sorry for my noobness :/ it is really bugging me as I think it has something to do with having cyanogen installed before but then again after pursuing the flash tool and restoring back to stock I can't think what is wrong
Sent from my LG-D802 using xda app-developers app
Double Flash seemed to fix it
I flashed the ROM after returning to stock again and before flashing it wiped all partitions and it still stuck on boot so i went straight back into recovery and flash again this time without wiping anything as i was only writing over the StockMOD install and it seems to work
So the solution for me seemed to me to flash it twice wiping before the first and after it fails to boot just flash it again without wiping.
I now have it up and running and I'm very happy with it
Thanks for those who tried to help me much appreciated
Hi,
I am currently using Miui 7 (V 6.4.28).
I wanted to try ED300 CM 12.1. So I did a full backup of the ROM>format all>Flashed the new ROM. But I see that the Miui boot image/splash image still present there, even if I completely erased all the partition.
Question is, how I can flash the boot image of Lenovo a6000/plus? Additionally, can someone also provide the new Lenovo stock boot logo. I somewhat like that more.
Thanks.
Meetwidargha said:
Hi,
I am currently using Miui 7 (V 6.4.28).
I wanted to try ED300 CM 12.1. So I did a full backup of the ROM>format all>Flashed the new ROM. But I see that the Miui boot image/splash image still present there, even if I completely erased all the partition.
Question is, how I can flash the boot image of Lenovo a6000/plus? Additionally, can someone also provide the new Lenovo stock boot logo. I somewhat like that more.
Thanks.
Click to expand...
Click to collapse
Thats due to the twrp 3.0.0 which was included with MIUI 7. Just flash this old twrp 2.8.6.1 version by sevenmax.
sasukay said:
Thats due to the twrp 3.0.0 which was included with MIUI 7. Just flash this old twrp 2.8.6.1 version by sevenmax.
Click to expand...
Click to collapse
I try to flash twrp 2.8.6.1 by sevenmax but boot splash is not changed it still mi boot splash [emoji20]
Sent from my HM2014817 using XDA-Developers mobile app
well you can flash the stock rom
backgamons said:
I try to flash twrp 2.8.6.1 by sevenmax but boot splash is not changed it still mi boot splash [emoji20]
Sent from my HM2014817 using XDA-Developers mobile app
Click to expand...
Click to collapse
Well, I did a bit of digging but couldn't find the splash image ditectory in the MIUI boot and recovery image. But, Im pretty sure that when I changed the recovery, the splash image also turned back to stock lenovo logo.
Meetwidargha said:
Hi,
I am currently using Miui 7 (V 6.4.28).
I wanted to try ED300 CM 12.1. So I did a full backup of the ROM>format all>Flashed the new ROM. But I see that the Miui boot image/splash image still present there, even if I completely erased all the partition.
Question is, how I can flash the boot image of Lenovo a6000/plus? Additionally, can someone also provide the new Lenovo stock boot logo. I somewhat like that more.
Thanks.
Click to expand...
Click to collapse
Just flash any stock rom, then do a full wipe(dalvik, cache, system, data), then flash ED300's cm 12.1 rom.. U will get the stock splash image.
Hit thanks, if i helped!!
Flash it with TWRP
mshoaib7 said:
Flash it with TWRP
Click to expand...
Click to collapse
T
his worked for me. I read a bit about where the splash image is stored, but couldn't find the right location, since it depends on boot partitions and is not just any jpg file stored at some particular location. But, all thanks to you, I got to know how to replace it.
I'm having exams right now, but I'll surely be making some custom splash images for our phone. Thanks a lot.
And, one more thing, do we need to add all those manifest, otcert, releasekey and stuff in the META-INF folder or just update-binary and updater-script will do.? :silly:
sasukay said:
T
his worked for me. I read a bit about where the splash image is stored, but couldn't find the right location, since it depends on boot partitions and is not just any jpg file stored at some particular location. But, all thanks to you, I got to know how to replace it.
I'm having exams right now, but I'll surely be making some custom splash images for our phone. Thanks a lot.
And, one more thing, do we need to add all those manifest, otcert, releasekey and stuff in the META-INF folder or just update-binary and updater-script will do.? :silly:
Click to expand...
Click to collapse
No, you don't need those files. Update-binary and updater-script is all you need in meta-inf folder. I was just too lazy to remove those files ?
I have the same problem . When I start my phone the MI logo appears followed by the Cyanogen Mod boot animation . How do remove it? I have installed another recovery but still same prob!
Pls built many kinds of splash boot logo.
mshoaib7 said:
Flash it with TWRP
Click to expand...
Click to collapse
thanks its work for me
mshoaib7 said:
Flash it with TWRP
Click to expand...
Click to collapse
How to make custom splash screen for lenovo a6000 /plus
Hi I am experiancing same problem .my phone a 6000 plus ,didn't show Lenovo logo on startup. .also not load to antroid ... previously it was lolipop I tried to flash to a another rom by using Mi flash ...do you have any solution for this ...I want to use this phone no need of any particular rom ..just want to use this phone ((very sad))