Related
Hi Guiz, So you all probably have heard this a million times but i have tried every i can to fix this. I have tried many options such as Deleting and re-installing the drivers, trying a different usb port 2.0 and 3.0 I have restored my phone. And my phone only comes up as PTP Camera which is useless since i cant root my N4. This problem occured after i updated to Android 4.3. So my question is how can i make my N4 show up as MTP Storage?
I'm running on Windows 8. Thanks in advance.
Zypent said:
Hi Guiz, So you all probably have heard this a million times but i have tried every i can to fix this. I have tried many options such as Deleting and re-installing the drivers, trying a different usb port 2.0 and 3.0 I have restored my phone. And my phone only comes up as PTP Camera which is useless since i cant root my N4. This problem occured after i updated to Android 4.3. So my question is how can i make my N4 show up as MTP Storage?
I'm running on Windows 8. Thanks in advance.
Click to expand...
Click to collapse
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy
danielms22 said:
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy
Click to expand...
Click to collapse
I've been trying to solve this myself, i thank you!!! Finally!!
danielms22 said:
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy
Click to expand...
Click to collapse
Thats the problem it doesnt show up.
Zypent said:
Thats the problem it doesnt show up.
Click to expand...
Click to collapse
I also have this problem, my nexus 4 won't show up in device manager (windows 8) it will make the noise and will only show up in my computer if I have usb debugging enabled and select media device, any other combination it won't show up in device manager or in my computer.
What do I do?
foliage said:
I also have this problem, my nexus 4 won't show up in device manager (windows 8) it will make the noise and will only show up in my computer if I have usb debugging enabled and select media device, any other combination it won't show up in device manager or in my computer.
What do I do?
Click to expand...
Click to collapse
Today i've got my new Nexus 4, succesfully unlocked & rooted with this toolkit, but had problems with installing google usb drivers and Universal Adb Driver.
The solution is based on several steps.
I solved my problem this way, hope it will help someone
I have windows 8.1 64-bit, so i had to solve firts the problem with driver signature
1.
How To Disable And Bypass Driver Signature Enforcement In Windows 8
Tutorial link
Tutorial video
If you have problems with driver installations, try this:
2.
Remove hidden existing Nexus 4 or Android Nexus ADB Interface in Device Manager
i had to cleanup the drivers remained after few failed adb driver installations because of the problem in the first step
- (OPTIONAL) Install Nexus Root Toolkit and run it
- (OPTIONAL) click on Full Driver Installation Guide and at step 1
- open Device Manager, click View and select the option Show hidden devices
- now you will see some additional hidden devices (greyed out)
- because i wanted to install the drivers from start i deleted them, that means uninstalled them and added checkmark for deleting local files
- screenshot is attached so you can better understand
Remove the devices that could make problems
3.
- Run Nexus Root Toolkit
- click on Full Driver Installation Guide
- at Step 1 open USBDeview
- in my situation i deleted all the entries with google name
- screenshot in the attach
Final step:
4.
Install drivers for Nexus 4
- Run Nexus Root Toolkit
- click on Full Driver Installation Guide
- at Step 2 i installed Solution #1 - Universal drivers
- maybe you'll need to manually add drivers, if you have an entry in Device Manager that as yellow !
- right click on it - update drivers - browse my computer for drivers - I've added the path to installed Solution #1 - Universal drivers
"C:\Program Files (x86)\ClockworkMod\Universal Adb Driver"
- i repeated it for connection as mtp, ptp and none of that - selection for this is made on nexus: settings - storage - ... in the right upper corner - usb computer connection. so this way the device had installed the needed drivers
- screenshot is added in attach
I've used Wugs Toolkit for installing drivers and after that unlocking and rooting the Nexus 4.
My problem was that there was present HIDDEN ADB Interface under Android Device, after above mentioned steps, my nexus is working properly when connected as MTP device
danielms22 said:
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy
Click to expand...
Click to collapse
Brilliant!!!
Not showing up in device manager
danielms22 said:
1 quick Forum search would easily have solved this for you.
But since you're here:
1. Enable USB debugging: Go to phone settings -> About -> Tap build number repeatedly until developer menu is enabled. Go there and tick USB debugging.
2. On your PC, go to your device manager (when the Phone is plugged in and set to MTP), locate the phone, right click on it -> properties
3. go to the Driver tab
4. click Update Driver
5. click Browse my Computer for driver software
6. click Let my pick...
7. select USB Composite Device
8. finish up with the assistant
9. be happy
Click to expand...
Click to collapse
I am also facing this issue since flashing 5.0. It doesn't even come up on device manager. Any suggestions?
amj2403 said:
I am also facing this issue since flashing 5.0. It doesn't even come up on device manager. Any suggestions?
Click to expand...
Click to collapse
same here ==
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
U saved me BRO!!..was tired of using OTH
U saved me BRO!!..was tired of using OTH
Applying all things you said but yureka not connect with computer
USB Computer Connection is still not popping
Hi, I have tried all that is said above, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?
Problem Solved
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...
The problem is not in the phone, or can't be solved by it
Actually you have to do this via pc.
1)search update drivers and find the update device drivers option
2)in other devices find Android and double click
3)click the driver tab
4)click update driver
Worked for me ?????
PC connection Still its not working
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
Hi..
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"
can any one please help me ?
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
Sahil Badal said:
1. Proceed as Above.
2. Reboot your Phone.
3. Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
Problem Solved...
Click to expand...
Click to collapse
After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected"
Yureka not connect to PC
[[/B][/B]
RAUSHAN0704 said:
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Click to expand...
Click to collapse
I have followed all above steps, but not shows USB connection.
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.
Hi, I have tried all that is said a, but still I am unable to connect my Yureka to PC. USB Computer Connection is still not popping any options.. Please help vikas meena 9694746144
Dear Sir,
As per your instruction i go to the setting but as u written
"Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox. "
after tapping computer connection nothing pop up arises. I can not enable Media Device (MTP)
Please guide me.
Suresh
vertexpac said:
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", this problem is after getting my replacement handset.
Click to expand...
Click to collapse
did u get any solution bro????..... i cant copy files to pc and root
---------- Post added at 05:33 AM ---------- Previous post was at 05:30 AM ----------
shadowkill97 said:
well i have tried that but it wont even detect my yureka. IT DOESNT EvEN SHOW A UN RECOGNIZED DEVICE. HOW TO RESOLVe
?
Click to expand...
Click to collapse
did u got any solution bro... i cant connect my yureka to pc. i want to root it. But i cant connect it
USB connection problem
I am also getting the same problem "After pressing "USB computer connection" USB setting Popup is not coming. and it says "USB is now Disconnected" ", plz help me
yureka AO 5510
Sir,
My yureka AO 5510 hardbricked and i used emmc image and enter into fastboot mode ( by only pressing power button it can switch on and work) but to flash this is not shown in device manager. I tried with usb driver, adb driver, nothing happend.... and gave to shop and changed its usb port.... but no use....
i can power on it with this memory card or go to fastboot mode.... can not connect to PC.... Please help me....
thank you for your practical guidance, because since so many days and several times I tried to connect with my laptop, last i thought to install some yu drives in my laptop, but this is a very useful points, you are putforth in this moment. once again thank you for the substantial helping tendency you have shown. may proceed it in future to help others,
i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!
Got ot developer tools and enable the android debugging.. reboot the mobile
After reboot a pop up window will be opening and asks for disable the android debugging .. disable it in developer tools and then connect the usb cable again . then the pop up will be coming as usual ...and problem got solved
Yureka not connect to any pc
Pc shows popup that the device is malfunctioned.
In device manager it says device dicriptor request failed.
vrishabhv2 said:
i am using yu yereka lolipop os and windows 10 x64 pro and tried all method to install drivers but even when i connect my yu yureka ao5510 then it shows me (device disciptor request fail)error code 43.i did all thing from disable driver enforcement and various adb drivers but not success yet..
and when normally connet phone to pc it also not showing the adb option and mtp driver.i aslo tried with different pc but same problem....
plz guy help me!!!!
Click to expand...
Click to collapse
did you find any solution?
Yu yureka- not recognising in pc though enabling the as mtp- windows 8.1-32 bit- mtp
YU YUREKA- NOT RECOGNISING IN PC THOUGH ENABLING THE AS MTP- WINDOWS 8.1-32 BIT- MTP not recognising. I have downloaded and updated all drivers but still not working. pc is not recognising my phone. i have done all the things adb interface kindly help friends
which rom?
try enabling developer options and untick usb debugging , this might help
Since many guys are not able to connect their yureka phone to PC so for them this thread might be helpful. I was also facing the same problem, even USB computer connection setting was not popping up. So following are the steps to resolve that problem.
1. Go to Settings -> About Phone -> Tap several times on Build Number to enable developer Options if you haven't enabled it yet.
2. Now You can see one setting titled "{ } Developer options" under Settings Menu. Tap on developer options and enable "Android Debugging".
3. Now connect your phone to PC via USB cable. Now You will see that your phone is successfully connected for debugging. Now without disconnection your phone from PC, go to settings->Storage->Menu (Three vertical Dots at top right corner of the screen). Now click on "USB computer connection", now the usb setting pop up will come. Now enable Media Device (MTP) checkbox.
4. Now you are ready to access your internal and external sd cards of your phone. Enjoy
Hi Guys.
I have one Redmi Note 3 and I am having a problem to connect it to my pcs.
Before everything was ok. I connected the USB cable and I could transfer files between my pc and the Redmi Note 3 using My Computer.
Now, I connect the Note 3 and I cannot see the storage anymore. So, it's impossible to copy anything between pc or note 3.
I checked with several cables and different ports and in two different pcs. I cannot connect with MIPC Suite either. The Note 3 recharges normally.
I believe it's a driver version problem.
I am using Windows 10 and MIUI 7.1.6.0 Stable Version.
Thanks for all help.
Check if the drivers are updated to win10
The best way is to download them from miui.com or mi.com
Enamorado de mi Redmi Note 3 ?
English version not work.Install Chinese version
xylos9 said:
English version not work.Install Chinese version
Click to expand...
Click to collapse
My friend, thanks for your kind help. Could you post the link for us? I have no idea about chinese. Sorry
xylos9 said:
English version not work.Install Chinese version
Click to expand...
Click to collapse
Thanx mate..
Go to the Setting> Additional Setting and look for the "developer options"
if you cant see that option, go to the Setting> About phone and tap five times on "MIUI version", you'll see a little popup message "you a developer now", then go to Setting> Additional > Developer options and enable "developer options" and "USB debugging"
Hey Guys, even i faced the same problem but it got fixed so easily than i ever thought . As soon as you connect your phone to laptop using data cable, you will find an option called " Touch for more option" in your phone, when you touch on that option, it will prompt you with three option > Charging only , Thasfer files (MTP) and Transfer photos (PTP), when you click on these you will be able to see Internal storage, then you can copy paste whatever files you want Hope it helps.
Even after usb debugging, i can not see the storage in my pc
I had same issue with my Xiaomi Redmi 3s prime as i can not get it to connect to my PC but got it fixed .
1. enable developer option and enable USB debugging
2. reinstall MTP driver on windows using wpdmtp.inf in windows folder while your phone is connected
read full details here: [Solution] Xiaomi Phone not connecting to PC via USB
Thank you so much. I tried all the above, your suggestion worked
Perfect, Thanks it worked !
This matter works for me ! thanks
yes, it works
Thanx Alot
Thnx Alot buddy
very very thankful
Tried everything
Visited MI service center
Contacted their helpline
Tried every website
Nthing worked
Bt ur small Suggestion worked perfectly
Was trying it since last 3 days
thanks alot bro..it also worked for me
Solution to Xiaomi Phone not connecting to PC via USB
Enable developer option: go to settings>About Phone and tap MIUI version about 6 times then you will see a pop up notification that you are now a developer.
Enable USB debugging: after enabling developer option you should go to settings>additional settings>Developer options then enable USB debugging
Now connect your xiaomi phone to your PC via USB cable
On your computer go to PC>C drive>windows >INF > and look for wpdmtp.inf (make sure your xiaomi phone is connect via usb) then right click on the file wpdmtp and click install with your phone plugged in.
Note: when you connect via cable you have an option on the top notification to select either to charge only, transfer files or photos. you should select transfer file.
After this steps your Xiaomi Phone will be detected by your computer and you can access the internal memory.
you can share this steps with friends experiecing the same problem of xiaomi phone not connecting to pc
hello guys,
my red mi note 3 phone is not connecting to the pc for the recent update version 8.1.1.0 to windows 10.
I tried installing wpdmtp.inf file on windows but I get a prompt saying, INF file you have selected doesn't support this method of installation
can't connect in pc for flashing my phone
same like my redmi note 1w can't connect to my pc (no detect anything),
first i think problem with usb port in phone cz i played game with charging, but im try to jumper usb in hardware it's not problem solved. and now my phone bricked i can't do anything.... try to flashing with sp flashtool but phone not connect to pc....
my phone just in recovery mode....latest i'm try to update.zip in recovery mode always failed cz update.zip is not detect on sd card (file must in internal memory)...
pls help me
cyrilcyril70 said:
Solution to Xiaomi Phone not connecting to PC via USB
Enable developer option: go to settings>About Phone and tap MIUI version about 6 times then you will see a pop up notification that you are now a developer.
Enable USB debugging: after enabling developer option you should go to settings>additional settings>Developer options then enable USB debugging
Now connect your xiaomi phone to your PC via USB cable
On your computer go to PC>C drive>windows >INF > and look for wpdmtp.inf (make sure your xiaomi phone is connect via usb) then right click on the file wpdmtp and click install with your phone plugged in.
Note: when you connect via cable you have an option on the top notification to select either to charge only, transfer files or photos. you should select transfer file.
After this steps your Xiaomi Phone will be detected by your computer and you can access the internal memory.
you can share this steps with friends experiecing the same problem of xiaomi phone not connecting to pc
Click to expand...
Click to collapse
Thanks! This procedure worked for me on windows 10
Connecting my phone to PC doesn't do anything, I have developer options and checked USB debugging. Anyone can tell me how to install drivers for xiaomi devices, also where to get them for this device
there you go > https://xiaomibuzz.com/usb-drivers/download-xiaomi-usb-drivers.html
next time, use google.