Related
Sorry for my English I will try to explain my problem.
After rooting everything was fine, but when I try to flash stock firmware somethings happen.First problem is that my PC cannot detect the phone with Odin and adb or mass storage I am 100% sure that the problem are not the drivers because I root that phone on the same PC before a week and of course I try everything on a another computer, but without success.
Download mode Odin cannot detect the phone! after many attempts to fix usb problem now the phone cannot boot , only in recovery (loop)after every start it's show recovery with message
Filesystems:
system: rfs
data: rfs
cashe: rfs
maybe system, data and cache files are erased I don't know.
recovery version is 0.1.3.b5
How can I flash stock firmware without PC. For example HTC devices can flash from SD card - Gold card, and PB99IMG.zip (I can't explain very well what I mean sorry)
Maybe the phone is usb bricked !
working..
recovery - only recovery
Download mode Volume Down + power off + camera ) - but cannot connect to PC and Odin.
not working
after flashing new costume ROM - the same thing - reboot to recovery
installed software on pc
android SDK,Kiesmini_1.0.0.10075_1,Samsung PC studio 1.5.1.10064_2,Drivers for spica on (Windows 7 x86)
really I cant find post like this !!! and sorry for my English
If you can go to download mode and phone is not detected, then you have bad drivers or bad usb in PC. Try another PC.
I have 3 pc and 2 cables and the same problem cannot detect. Can I flash new stock firmware without odin ?
godhamer said:
I have 3 pc and 2 cables and the same problem cannot detect. Can I flash new stock firmware without odin ?
Click to expand...
Click to collapse
Have you tried different USB ports, specifically one on the back of the PC?
Sent from a state of Serendipity
I told you that the problem is not drivers.Before week I flash another Samsung without problems. I think the problem is USB brick or something else
I HAVE DRIVERS
Help please !!!!!!!!!!!!!
reinbeau said:
Have you tried different USB ports, specifically one on the back of the PC?
Sent from a state of Serendipity
Click to expand...
Click to collapse
godhamer said:
I told you that the problem is not drivers.Before week I flash another Samsung without problems. I think the problem is USB brick or something else
I HAVE DRIVERS
Help please !!!!!!!!!!!!!
Click to expand...
Click to collapse
Calm down. Did you read what I posted above? I said nothing about drivers. Have you tried other USB ports? Most people find the ports on the back of the CPU work the best, not ones on the front, or on a hub. It does make a difference.
Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can't find a solution nowhere.
I have the same problem, been trying to search online for few days, can't find the solutions.
Sammguy said:
Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can find a solution nowhere.
Click to expand...
Click to collapse
bryanling said:
I have the same problem, been trying to search online for few days, can't find the solutions.
Click to expand...
Click to collapse
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
shaggy_kobain said:
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
Click to expand...
Click to collapse
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
bryanling said:
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
Click to expand...
Click to collapse
Enable developer mode (tap on settings, about and then tap on the build number 7 times to enable developer mode).
Then back to settings, developer options and turn on usb debugging.
Sent from my Note 3 via Tapatalk
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Sammguy said:
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Click to expand...
Click to collapse
Did you disable the mtp application?
drewcam888 said:
Did you disable the mtp application?
Click to expand...
Click to collapse
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Sammguy said:
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Click to expand...
Click to collapse
I too am having this issue... it is quite frustrating. I rooted using towel root and that worked fine up until the beginning of September then USB was gone gone gone!. I was thinking of just doing a factory-restore of my phone, but I am not sure that is possible with having Towel rooted my phone. I just don't know what steps to take. Any help would be greatly appreciated!
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
It takes two to tango; how do you know the problem is not the PC?
Older versions of stock software actually put the phone in Airplane Mode when you were using USB 3.0, and had an inactivity timer or something that would turn the USB link off after a while. That didn't happen if you were operating on a USB 2.0 link.
So, if your PC has any non-USB 3.0 ports (the connector will not be blue) you could try using a USB 2.0 port.
Sometimes intermittent behavior is caused by bad cabling or a damaged connector, so a second thing to try is using a replacement cable and/or alternate ports. (Don't buy bargain basement eBay $2 cables btw - you will get what you pay for)
good luck
nancyvf8 said:
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
Click to expand...
Click to collapse
Is this a phone that you flashed a custom rom, rooted, or unlocked the bootloader?
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Same Problem
screem_3 said:
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Click to expand...
Click to collapse
I am having The same problem with Samsung S5 900F and Windows 7
Alejandro R said:
I am having The same problem with Samsung S5 900F and Windows 7
Click to expand...
Click to collapse
Same problem my phone is already with android Lolipop I think this have something to do
Alejandro R said:
Same problem my phone is already with android Lolipop I think this have something to do
Click to expand...
Click to collapse
+1 i think it might be due to the android 5
Would really appreciate if any expert can let us know for sure
screem_3 said:
+1 i think it might be due to the android 5
Would really appreciate if any expert can let us know for sure
Click to expand...
Click to collapse
me too I need the phone working with LTE 700/1700 bands
Me too... Any Solution for that ?
SM-G900F NOT WORK ON DM+MODEM+ADB
maybe a solution
screem_3 said:
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Click to expand...
Click to collapse
Sorry the intrusion, i had the same problem and i had fixed it by rebooting the system in recovery and enabling cp logging, after that i was stuck in cdc serial and solved installing keis, Hope I help you guys
Acquarius7 said:
Sorry the intrusion, i had the same problem and i had fixed it by rebooting the system in recovery and enabling cp logging, after that i was stuck in cdc serial and solved installing keis, Hope I help you guys
Click to expand...
Click to collapse
He's right! turn on CP Logging then do it and it worked... The only problem I did face which could have been something different was when I used the app Samsung PHONE INFO and tried to get to the service menu it would come up blank, after disabling CP and back to MTP + ADB it came up again.
Also, I am on G900V with their newest firmware OE1 and there is no option for CP Logging anymore, it automatically detects it like it did in KitKat. (Just a side note)
I had faced the same issue
Booted into recovery and enabled CP logging. it works perfect
Quick Question
screem_3 said:
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Click to expand...
Click to collapse
Hey, just a quick question, i'm currently attempting to do the same procedure on my Ulefone future, and i'm having a tough time finding a way to access the hidden advanced usb settings menu.. Now, saying that i'm a neophyte with the higher end of android tinkering would be an insult to neophytes everywhere. I am utter clueless when it comes to this stuff.. My phone has been rooted and every pre-requisite has been met, i simply cannot find the code for accessing this blasted hidden menu, please let me know how you accessed your usb setting menu.. I would appreciate you and love you, platonicly, forever.
thaaaaaaaaaaaaaaaaaanx.. it's working 100%
Acquarius7 said:
Sorry the intrusion, i had the same problem and i had fixed it by rebooting the system in recovery and enabling cp logging, after that i was stuck in cdc serial and solved installing keis, Hope I help you guys
Click to expand...
Click to collapse
I would like to thank you so much for this solution. I spent a lot of time trying to find a solution for Samsung S4 beeing not recongnized by the PC in DM + MODEM + ADB mode and you gave me the solution. Thank you.
hey,everybody .
this is my first post here , so please excuse my ignorance .
s4 att , android 4.2.2 , baseband i337UCUAMF3 , KERNEL 3.4.0-812098 , BUILD # JDQ39.I337UCUAMF3
When connected to pc , it starts charging , put pc does not see it .
tried 10 different usb cables ( including samsung original ) , tried dial *#0808# made sure it shows mtp+adb
tried 4 different computers from windows xp . up to windows 10 , kies does not see it , odin does not see it , pc does not see it .
i put it in download mode , no change .
updated windows media player , installed google sdk , nothing !
reset to factory , several times , did it from the phone menu , and from recovery , nothing !
i put 4.2.2 on a micro sd card , went into recovery , apply update from external i get error (error in tmp/sideload/package.zip status 7 )!!!!
does not connect via adb either !!!
PLEASE HELP !!!!
You did not mention the samsung kies, smart switch in your post. Usually I use those software to check whether my pc has samsung usb driver properly installed.
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
mhk9626 said:
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
Click to expand...
Click to collapse
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
sway8966 said:
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
Click to expand...
Click to collapse
tried smart switch too , nothing !!!
Sounds like the USB port of flex cable may be damaged.
audit13 said:
Sounds like the USB port of flex cable may be damaged.
Click to expand...
Click to collapse
you were the only one who tried to help . so , many thanks !!
No worries, we're here to help and learn from each other. Did you have an opportunity to try any other possible solutions? Do you have access to another flex cable?
Hello guys! My friend just bricked his phone and I want to fix it for him. Unfortunately odin doesn't see the telephone. I tried updating samsung drivers, changing cables. Please help me:fingers-crossed::good:
interlopul said:
Hello guys! My friend just bricked his phone and I want to fix it for him. Unfortunately odin doesn't see the telephone. I tried updating samsung drivers, changing cables. Please help me:fingers-crossed::good:
Click to expand...
Click to collapse
1. Are you able to enter the recovery menu?
2. Are you able to enter the download mode?
3. Do you hear the USB connected sound on your Windows machine when you connect the phone while the phone is in download mode?
4. Have you tried different versions of Odin? During my researches I have found a site which recommends 3 different versions to try (AndroidSage: Download Latest Odin 3.13.1, 3.12.10, 3.12.5 Tool For All Samsung Galaxy Devices).
5. Have you tried installing a custom OS again or the stock Samsung OS?
1. unfortunately not
2.yes, this works fine
3.no
4.I tried just 3.14.4
5.I am trying installing stock firmware
interlopul said:
1. unfortunately not
2.yes, this works fine
3.no
4.I tried just 3.14.4
5.I am trying installing stock firmware
Click to expand...
Click to collapse
I assume that you know that there is a warning before entering the download mode which you get rid of by pressing the volume up button.
Are you sure you are using a USB data cable and not only a cable used for charging? The first one usually has 4+ wires and the second one only 2.
If you are sure that you are using data cable then you can try doing different stuff to your phone (like turning it on and off, entering download mode and exiting) while connected to the PC and listening if any sound comes out of your PC.