Database Users

[Q]L7 CM10 - Wifi issue

Hi, im facing a wifi issue on CM10 (i flashed from v10k). 3g seems to work fine, but everytime i try to connect with wifi - it just goes "enabling wifi", and nothing happens - then wifi ON/OFF switch goes to gray.
Anyone with the same issue or know how to solve it perhaps?
Cheers!

I notice i have same error but my rom is cyanmod last version!i have installed first, v10k with bootloader unlocked an rooted and then from cwm recovery i have reset default settings .Now i can't open wifi,only a grey buton.
Sent from my LG-P700 using xda premium

I found the solution for this issue:you moust reinstal in cmw recovery baseband v10k.
https://www.dropbox.com/s/75t4nkabaymdb9s/v10Baseband.zip
Credits to a russian people from 4PDA.Me just reuploaded.
Sent from my LG-P700 using xda premium

are you downgraded from V20 to CM10?
maybe you should flash the baseband

I've instaled v20d when apperead,but i use this stock rom about 1-2 days.After this terrible experience i've instaled cyanmod and v10k baseband.My problem with wifi started when i've instaled v10k(Homero zip version), then cyanmod.
Sent from my LG-P700 using xda premium

CM10 Wifi / 3G
Hi all,
I just flashed CM 10 to my p700 and now my wifi and 3g aren't working at all.
I tried to setup my APN several times but these settings can't be saved for some reason.
When pressing the WIFI icon it shows that it is turned on but it isnt receiving or transmitting (I can't see it in my home network.)
Next step is going back to V20D_00_m

MJBBRU said:
Hi all,
I just flashed CM 10 to my p700 and now my wifi and 3g aren't working at all.
I tried to setup my APN several times but these settings can't be saved for some reason.
When pressing the WIFI icon it shows that it is turned on but it isnt receiving or transmitting (I can't see it in my home network.)
Next step is going back to V20D_00_m
Click to expand...
Click to collapse
Hello,install baseband in CWM recovery(Look up,i posted this baseband).

bogdan109 said:
Hello,install baseband in CWM recovery(Look up,i posted this baseband).
Click to expand...
Click to collapse
I tried to get in CWR but somehow it doesn't work.
I will give it another try with your baseband.
First I need to get in CWR mode.
But thanks :good:

MJBBRU said:
I tried to get in CWR but somehow it doesn't work.
I will give it another try with your baseband.
First I need to get in CWR mode.
But thanks :good:
Click to expand...
Click to collapse
If you instaled cyanmod,you can enter in recovery.Steps are:
1.Turn off the phone
2.Keep push Home +VUPVOLDOWN(center) +Power
Phone will vibrate an CWR appears.

I tried this key combination but it didn't work.
Just flashed to V20D_00_m by KDZ
Now it doesn't get past the lg boot screen i'll fix this first.
In the end I want to run CM10 on this device.

MJBBRU said:
I tried this key combination but it didn't work.
Just flashed to V20D_00_m by KDZ
Now it doesn't get past the lg boot screen i'll fix this first.
In the end I want to run CM10 on this device.
Click to expand...
Click to collapse
Belive me,Cyanmod is much better.If you whant to pass boot logo,must hard reset phone .Here: :good:http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html

bogdan109 said:
Belive me,Cyanmod is much better.If you whant to pass boot logo,must hard reset phone .Here: :good:http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html
Click to expand...
Click to collapse
And yes there was the CWM recovery screen.
Thanks for your assistance:good::good:
I'm learning it the hard way.
Update: Currently running CM10

MJBBRU said:
And yes there was the CWM recovery screen.
Thanks for your assistance:good::good:
I'm learning it the hard way.
Update: Currently running CM10
Click to expand...
Click to collapse
3G and WIFi work now?

bogdan109 said:
3G and WIFi work now?
Click to expand...
Click to collapse
Yes they do :good::good:
Now It's importing my data from google even if I turn off WIFI
Thanks again

MJBBRU said:
Yes they do :good::good:
Now It's importing my data from google even if I turn off WIFI
Thanks again
Click to expand...
Click to collapse
For Backup an restore i use Wondershare MobileGo for Android.Is a good program.I recomand you.
Cheers!:good:

[Q] Rooted, CM 10.1, clean rom, now stuck...need help!

Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.

Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2

mavverick said:
Hey, I could really use some guidance here. I'll present the information as simply as I can:
I bought a Galaxy s4 AT&T a few days ago. I've been interested in rooting and flashing different roms, but I think I may have done a bit too much.
I rooted using the motochopper method - great, worked like a charm.
I made a backup of my original rom using CWM. I even took that backup and saved a copy of it on my Mac - perfect.
I thought I'd try Cyanogenmod 10.1, so I downloaded the latest nightly build and flashed it using CWM - so far so good.
Everything was working fine, but my LTE (or any data) was not working at all. I could use Wifi, but once I turned wifi off, I had no data, no gps, no 3g, no 4g, no LTE. I tried the *#*#4636*#*# method, the LTEOnOff app, and changing my APN based on the recommendations provided in this thread - I just couldn't get it to work.
I thought I'd try restoring my original backup, but when I went into CWM to do so, it said that my backup could not be found...(I still have a backup on my computer, just in case)
I needed my phone to work, and badly needed LTE to do so. So, I downloaded this rom: [ROM] CleanROM 1.0 -★| Clean and Smooth! | The Way Nature Intended! |★-
So far, this rom was working fine - it's just a debloated version of TouchWiz - which I like. But, here's my problem now - If my phone reboots, it stays frozen on the Samsung logo (with unlocked lock logo underneath), and I can't get past it. I'd have to go BACK into recovery, and flash the CleanROM all over again, and set my phone up as new with all data wiped.
I really need my phone to work again, and I don't know where to go from here. What options do I have left? What can I do to get out of that frozen Samsung loading screen? Can't I just reset my phone to the way it was? Can't the CM10.1 rom work with LTE?
Your help will be greatly appreciated.
Click to expand...
Click to collapse
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot

KingKongDingDong said:
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Flash ROM or ROM and gapps if AOSP
Reboot
Click to expand...
Click to collapse
Having the same issue so I figured I'd give these steps a shot. Followed them exactly and phone (AT&T S4, TWRP) would won't even reboot the first time into CleanROM. I'm stuck on the Samsung screen with the lock.
edit: I've noticed that now, when I reboot into TWRP, it prompts me for a password. Hitting cancel takes me to the regular home screen, but I had not been getting the password prompt before attempting to install CleanROM. A permissions issue, perhaps?
edit 2:
I've just spent some time trying a bunch of things with bits of good luck surrounded with tons of bad. Below are the steps I've taken to try to get CleanROM to boot (and reboot) without any issues. Hopefully they help figure out the issues we're having.
Wipe Cache
Wipe Dalvik
Wipe /system
Flash CleanROM
Reboot
---- Failed
Reboot into Recovery
Prompted for password, hit cancel
Fix permissions
---- Failed
Reboot to recovery
Prompted for password, hit cancel
Format data (type yes)
Reboot
---- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Powered off and then back on (not using reboot)
---- Failed
Reboot to Recovery
No longer prompted for password
Factory Reset
Attempt to Fix Permissions: failed
Restore default settings
Reboot system
---- Failed
Reboot to Recovery
Prompted for Password, hit cancel
Format Data (type yes)
Reboot System
--- Successfully booted to CleanROM
Ran through phone / account setup
Saw home screen
Reboot (using reboot, not power off / on)
---- Failed
Reboot to Recovery
Prompted for password, hit cancel
Factory Reset: failed
Restore Default settings
Prompted for password, hit cancel
Factory Reset: failed
* Internal Storage showing 0MB (as if it's not reading it correctly)
Fix Permissions
Prompted for password, hit cancel
Nothing has changed, my phone is currently chilling in TWRP

MJHawaii said:
Your best option is to flash the stock MDB firmware via odin . After you get the PASS on Odin go ahead and manually boot into stock recovery and wipe data factory reset again then reboot. You will have to re root and reinstall recovery but this will take care of any issues you had from a bad flash.
http://forum.xda-developers.com/showthread.php?t=2261573
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

cuffed zhesea
Cataligh said:
This. You decided to ignore this post for some reason.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.

Hey. Thanks for the feedback in this thread. I flashed factory through Odin, and everything is working fine. I then factory reset my phone through factory recovery. I'm back to standard touchwiz with all the bloat lol.
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Appreciate all the help people!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

Your best bet is do what "cataligh" mentioned... flash back to stock via odin...
Sent from my SAMSUNG-SGH-I337 using xda premium

When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.

TheAxman said:
When you flashed cm10 it probably wipe the internal sdcard, you should ALWAYS do you backups to the extsdcard...period.
Click to expand...
Click to collapse
Yeah, absolutely! I always backed up and flashed roms from my external SD.

mavverick said:
I'm going to wait until there a more stable release of cm10.1 - that was a good rom.
Click to expand...
Click to collapse
waiting is for simpletons. get aokp and transcend...

jaboles said:
I can't speak for OP, but I was hoping there was another way to rectify what has already been done without flashing stock seeing as how I'm on OSX. If that's the only option, then so be it.
Click to expand...
Click to collapse
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
As I mentioned before starting over is always the Best and Safe way to go. Shortcuts will only cause you headaches and possibly get you a brick that is why you see Odin stock threads. Do yourself a favor and start over I know it sucks but when your modifying your phones its gonna happen once in awhile.
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Wise words. Took your advice, installed Windows with boot camp, and got back to stock via odin.

I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.

TheAxman said:
I am going to say something about this thread, we are all giving advice on how to do this and that, and not once is it mentioned anywhere....in the OP
WHAT DEVICE WE ARE TALKING ABOUT! PLEASE STATE THE DEVICE WHEN NEEDING HELP!
The Ax says, I apologize if I missed what device.
Click to expand...
Click to collapse
My original question was for the AT&T version of the Galaxy S4 - i337.

xBeerdroiDx said:
waiting is for simpletons. get aokp and transcend...
Click to expand...
Click to collapse
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.

mavverick said:
Welllllll I just tried installing AOKP as well (Task650). Buttttttt, same issue with the LTE stuff. I tried reviewing all the APN settings, but didnt get any data connection on my phone except for wifi.
Click to expand...
Click to collapse
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium

doktor buknasty said:
What APN settings were you using?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yeah, data was enabled - and I was using ATT LTE apn settings that I found on these forums. I made sure to use the right now. Plus, when I rebooted my phone, it got stuck on the Samsung lock screen again...
Juuuuust ODINed back to factory right now for the second time :crying:

Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium

doktor buknasty said:
Was it these settings:
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Yes, those were the exact settings that I used. Is it possible that I could have a defective phone or sim card?
Right now, I am on factory touchwiz with root enabled, and my phone is working perfectly fine. I can reboot, use LTE, everything. The problem starts when I load any CM or AOKP rom...

AEONFLEX Q&A Troubleshooting

You know what to do. If you have any questions or problems come here. Me or someone else will do our best to help you resolve any issues.
Fauert said:
@bigfau, any fix for camera issue ?
Sent from my unknown using XDA Premium 4 mobile app
Click to expand...
Click to collapse
farhanito said:
D802?
Try "App Settings" module in Xposed. Change camera DPI to 479 or 481.
ÆONFLEX - 3.0.1
Click to expand...
Click to collapse
ÆONFLEX-3.0.3 Why Flash Anything Else.

droidiac13 said:
No problem and I wish I had better news for you. I don't think LGFlash is going to help. Again, I hope I'm wrong. I've seen too many of my friends go through it though. I would check to see if you can have it replaced.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
How do u back up your EFS files
Sent from my LG-D801 using XDA Premium 4 mobile app

**This is "my" way of doing things on my D800. I cannot take any responsibility for your device getting effed up no matter who's directions you follow!"
So you think you've got issues with this ROM? Won't boot, flash or start-up. Well, maybe you haven't followed the proper flashing sequence or you have a bad download. Did you know that 99.999% of the issues people are having is user related? Well, maybe I don't know the exact percentage, but you get my drift.
Seriously though, before posting a question, make sure you have done all the personal troubleshooting possible. To help make this a little easier, I am posting the exact method I use for flashing this ROM and I haven't had a single issue.
Before flashing any ROM, you should always be sure to do a proper back-up of your EFS files. This could very well save you from a bricked G2 and save you from having headaches if you do something wrong during the flash, wipe, etc...
The method I use is to download FreeGee from HERE. Once you have downloaded and installed FreeGee, you will have an option for backing up your EFS files and also will provided the different versions of TWRP (TWRP is all I use). Once your EFS files are backed-up, immediately upload them to the "cloud". If you need a good cloud app, HERE is one.
Now that you have this done, you are ready to attempt installing a custom ROM. Here are the steps that I take:
1. Boot into recovery
2. Make a back-up of your current ROM
3. Go back to the recovery home screen
4. Hit the Wipe button
5. Hit the Advanced Wipe button
6. Check the boxes for Dalvik Cache, System, Data and Cache. DO NOT CHECK THE INTERNAL STORAGE BOX!!!
7. Once the wipe is complete, go back to the recovery home screen
8. Hit the Install box
9. Choose the ROM you want to install
10. Swipe to confirm the flash
Once the flash is done, it should say successful if all went correctly. From that screen hit Reboot System. You should see the sweet boot screen and then be brought to the setup screen.
If you have done all this and you are still having trouble, please re-download the ROM and follow the steps again. You may have gotten a bad download.
If after you have followed these steps twice and you still have a ROM specific question, post away.
If anyone has something to add to this, let me know and I will add it. I hope this helps at least one person. bigfau, if you want me to remove this, please let me know.
Other Notes:
~ If you are on the software version that ends with "o", you will likely have to LGFlash back to the "d" version. @AyDee Thank you!
~ The newer version of TWRP and Philz Recovery may cause issues with flashing. I am using TWRP v2.6.3.3 and have no issues with it.

You could add that ATT users coming from the 'o' firmware need to roll back to 'd' and that a lot of users are having issues with the newest TWRP and Philz.
Not rom-specific but worth mentioning.

Anyone use Facebook Messenger on D800 with 3.0 and have it open two apps when you run it? Tried uninstalling and installing it again and still does it. Only app that does. Any idea how to fix it?
Sent from my LG-D800 using Tapatalk

Hello, I have the lgsetupwizard force close... What I do? Thanks!
Enviado desde mi LG-D802 mediante Tapatalk

When i want make a phone call from contacts app i got force closed, any idea ? Thx a lot
Click to expand...
Click to collapse
Up
Envoyé de mon unknown en utilisant Tapatalk

CotoZ said:
Hello, I have the lgsetupwizard force close... What I do? Thanks!
Enviado desde mi LG-D802 mediante Tapatalk
Click to expand...
Click to collapse
Just flash back to your stock kdz and then flash the rom, the issue can be solved.

Is there a 3.0.3 version out?

freakyd9984 said:
How do u back up your EFS files
Sent from my LG-D801 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
See #3 , You can use Freegee app from playstore .

muhyidin said:
Up
Envoyé de mon unknown en utilisant Tapatalk
Click to expand...
Click to collapse
I had same issue from clean install. I wiped cache and contacts. I replaced apks from 3.0.2 and also 3.0.1 but got fc. I solved by another fresh install. Now all works.

good morning last dorimanx rom comes with 1.4? correct?

jaco1975 said:
good morning last dorimanx rom comes with 1.4? correct?
Click to expand...
Click to collapse
Huh? Dorimanx makes a kernel, not a rom. I don't think this rom includes dorimanx kernel. However, you can flash it after installing the ROM.
Sent from my LG-D800 using Tapatalk

hey guys just want to share my experience when updatin 3.0.1 to 3.0.2.. here it goes . after i flash 3.0.2 i wipe also dalvic cache and after that i reboot my phone and got stucked at fastboot mode .. i just did search a little on the web . didnt find any answers . but then again as my experience of my phone being bricked i suddenly realize that i think i have a wrong kernel in my phone.. so what i did was to download stock based kernel . access my phone to twrp recovery . flash the stock kernel then reboot . :crossfingered: then it works like a charm . it booted . and now i am happy w/ my phone . ) i hope this one help someone thankss
Sent from my unknown using XDA Premium 4 mobile app

josh012 said:
hey guys just want to share my experience when updatin 3.0.1 to 3.0.2.. here it goes . after i flash 3.0.2 i wipe also dalvic cache and after that i reboot my phone and got stucked at fastboot mode .. i just did search a little on the web . didnt find any answers . but then again as my experience of my phone being bricked i suddenly realize that i think i have a wrong kernel in my phone.. so what i did was to download stock based kernel . access my phone to twrp recovery . flash the stock kernel then reboot . :crossfingered: then it works like a charm . it booted . and now i am happy w/ my phone . ) i hope this one help someone thankss
Sent from my unknown using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You DL and flash stock based kernel , from where and what ? access your phone by sideload or ??

Fauert said:
You DL and flash stock based kernel , from where and what ? access your phone by sideload or ??
Click to expand...
Click to collapse
i tried dorimanx kernel its a stock based kernel . i flashed it tru twrp . i have accessed using hardware keys combination . power down your phone. then hold power + volume - then when you see the lg screen . release your fingers then push it can using the same keys . you will be headed in factory reset mode . if yiu have installed twrp earlier before you bricked your phone . just follow tje step on the screen dont be afraid because that will only lead you to the recovery mode ..
Sent from my unknown using XDA Premium 4 mobile app

WIFI issue
I installed this rom on my D801 and seemed to go well. I booted up phone and could not connect to WIFI so I bypassed that part and when on. Everything seemed to be working so I went into WIFI settings again and tried to connect again but still wouldn't connect just kept searching. Can anyone help me resolve this issue because this really is a great looking rom and would like to use it?

jimmydee62 said:
I installed this rom on my D801 and seemed to go well. I booted up phone and could not connect to WIFI so I bypassed that part and when on. Everything seemed to be working so I went into WIFI settings again and tried to connect again but still wouldn't connect just kept searching. Can anyone help me resolve this issue because this really is a great looking rom and would like to use it?
Click to expand...
Click to collapse
I had similar problem on D800 and solved it by flashing TWRP 2.6.3.3 and then re-flashing this ROM. Hope it helps.

What are the changes in the last version

josh012 said:
i tried dorimanx kernel its a stock based kernel . i flashed it tru twrp . i have accessed using hardware keys combination . power down your phone. then hold power + volume - then when you see the lg screen . release your fingers then push it can using the same keys . you will be headed in factory reset mode . if yiu have installed twrp earlier before you bricked your phone . just follow tje step on the screen dont be afraid because that will only lead you to the recovery mode ..
Sent from my unknown using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I "mis"understood you lol .... flash the stock kernel ... habla .... habla... :laugh:

Persistent problem

Hello,
SOOOOooooo I posted a thread a few days ago. Bear with me, this introductory post is long BUT it is worth including all details I can right from the start to cut down unnecessary communication.
Here goes the continuation in some kind of a bullet form timeline format:
-Bought fully functional d801
-rooted (using ioroot) and unlocked succesfully
-attempted to install twrp using freegee (it didnt work giving me comparable results to this: http://forum.xda-developers.com/showpost.php?p=50501346&postcount=867)
-went on to install it manually from terminal emulator (I installed the rogers version as suggested by another user here as this is exactly my situation: http://forum.xda-developers.com/showpost.php?p=50502408&postcount=869
***
PROBLEMS STARTED HERE
***
-Tried many things
-Lost sleep
-Flashed succesfully using flash tool to the original firmware (D801V11B_00.kdz The EXACT same as the original. This is a Videotron (canadian) phone) I even flashed it twice. (still had the exact same issues
-Hard resetted countless times
-lost faith in humanity
Thats basically it so far.
Here are the symptoms:
-Imei = null
-Phone resets/reboots randomly and consistently every 5 to 15 seconds
-I can get all the way through to the android os all seems normal Except:
-No keyboard. ever.
-no wifi
-camera even works
-cant get into security and settings (crashes automatically into reboot)
Very good recent news thanks to advice from a memeber on here:
I tried in vain connecting to adb (always giving "offline") until someone suggested trying a different architecture (x64vsx86) or just different pc altogether.
It worked. Now the device is recognized and it says : "some serial number" device
and not "offline" as before
inputting "adb shell" yields: "[email protected]:/ $"
I am open to answer any question.
I am open to try anything.
This phone is a total loss right now so I am obviously open to anything. :laugh:
Phone is still rooted according to "download mode" interface.
Stock recovery installed right now.
I have what I believe to be EFS backups outputted by the initial Ioroot rooting automation (modemstat1.img and modemstat2.img)
You folks are the best.
Much peace and love.:good:

Your t-mobile, right. D801? (Not 100% on that) if you are, you need lg flash tool. I don't have a link because I'm on my phone but it's around. You need to download the T-Mobile files in the 1st post of the thread. Just follow the directions. Wish I had links
Sent from my LG-D800 using xda app-developers app
---------- Post added at 07:35 PM ---------- Previous post was at 07:32 PM ----------
Using that will bring you back to stock. From there you can root, twrp, and flash custom rom. Good luck
Sent from my LG-D800 using xda app-developers app

I am not with t-mobile.
Phone is from Videotron (Canadian phone)
I have reinstalled the stock .kdz using flash tool and am also already rooted.
Still have the same issues.
I cannot install anything from wifi since it isnt working...
Any guides on how to install twrp using adb interface?
Or any other suggestions?
Will a custom rom really solve these kinds of issues?
Thanks a lot for the advice I really appreciate any input at this point.:good::good::good:

zprovo said:
I am not with t-mobile.
Phone is from Videotron (Canadian phone)
I have reinstalled the stock .kdz using flash tool and am also already rooted.
Still have the same issues.
I cannot install anything from wifi since it isnt working...
Any guides on how to install twrp using adb interface?
Or any other suggestions?
Will a custom rom really solve these kinds of issues?
Thanks a lot for the advice I really appreciate any input at this point.:good::good::good:
Click to expand...
Click to collapse
Have you tried this http://teamw.in/project/twrp2/197 method.
Initially I tried almost everything but only this worked after couple of tries. http://forum.xda-developers.com/showthread.php?t=2449670

andro ninja said:
Have you tried this http://teamw.in/project/twrp2/197 method.
Initially I tried almost everything but only this worked after couple of tries. http://forum.xda-developers.com/showthread.php?t=2449670
Click to expand...
Click to collapse
Ok really good news :laugh::good:
Making slow but certain progress here.
So just to update also: I now CAN acces the phone from my computer when I put it in PTP (camera) mode.
First I realized that root was installed but that I did not have the supersu installed. I realized this because I could not access "su" in adb shell.
So I reinstalled the ioroot. Complete success. Super su is in the apps and su commands work.
Next I went on to download the rogers TWRP file (even though my phone is a videotron phone) and install it using this:
su
dd if=/sdcard/recoveryfilename.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Which worked!!!
I went to hard reset data and booted into the twrp interface.
I wiped everything from within twrp and went to reboot. it then informed that supersu was NOT installed on my phone and to slide the bar over if I wanted to install so I said yes...
But kind of bad news now:
Stuck at lg logo...:silly: Stays at lg logo and led is lit up changing from blue to green.
So what now?
Any suggestions?
Thanks a lot for the help everyone.:good:

See if you can get into recovery using adb or the holding the vol+pwr keys
Sent from my LG-D800 using XDA Premium 4 mobile app

andro ninja said:
See if you can get into recovery using adb or the holding the vol+pwr keys
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Like into the TWRP interface?
Easily yes, I absolutely can.
Next?
(it also seems I can no longer access the internal storage from windows explorer, although the phone is being recognized in devices and printers as "modem LG G2"... It attains this status when it is stuck at the lg boot loading screen)

zprovo said:
Like into the TWRP interface?
Easily yes, I absolutely can.
Next?
Click to expand...
Click to collapse
Did you take any backup using TWRP earlier? If yes then restore it.
If no then you can push another ROM for your device on to sdcard using ADB and install it and see.

andro ninja said:
Did you take any backup using TWRP earlier? If yes then restore it.
If no then you can push another ROM for your device on to sdcard using ADB and install it and see.
Click to expand...
Click to collapse
Ok I will try this now.
If you could provide with adb code example for copying a file to /sdcard i would really appreciate it.
Where do I go within the twrp recovery afterwards?
Thank you so much.:highfive:

adb push <local> <remote>
Sent from my LG-D800 using XDA Premium 4 mobile app

andro ninja said:
adb push <local> <remote>
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ooouuuufff.
New problem
Houston we have a problem:
adb devices = nothing.
How can I get adb devices to work if I cant boot into os and it is not recognizing it when in recovery?
Ahhhhhhhhhhhhhhhhhhhhhhhhh:silly:

zprovo said:
ooouuuufff.
New problem
Houston we have a problem:
adb devices = nothing.
How can I get adb devices to work if I cant boot into os and it is not recognizing it when in recovery?
Ahhhhhhhhhhhhhhhhhhhhhhhhh:silly:
Click to expand...
Click to collapse
Windows ****!! Follow this thread http://forum.xda-developers.com/showthread.php?t=2263822 and install that driver and try.
If not then find yourself a linux box and try. I am sure It'll work.

andro ninja said:
Windows ****!! Follow this thread http://forum.xda-developers.com/showthread.php?t=2263822 and install that driver and try.
If not then find yourself a linux box and try. I am sure It'll work.
Click to expand...
Click to collapse
Ok trying this now. Dont have acces to a linux right now so i hope I wont have to burn a live cd and all that fun stuff...
Thank you again. You seem to know a lot about this phone/android in general:good:

zprovo said:
Ok trying this now. Dont have acces to a linux right now so i hope I wont have to burn a live cd and all that fun stuff...
Thank you again. You seem to know a lot about this phone/android in general:good:
Click to expand...
Click to collapse
You don't really have to burn a CD/DVD, you can use a USB drive.
I don't know much though. I've been doing these things for quite some time now so have experience and I am totally free now so helping you here.

zprovo said:
Ok trying this now. Dont have acces to a linux right now so i hope I wont have to burn a live cd and all that fun stuff...
Thank you again. You seem to know a lot about this phone/android in general:good:
Click to expand...
Click to collapse
It WORKED!
Awesome fix.
adb devices now gives:
(device number) recovery
Ok going to copy a rom and kernel and try to install.

Tried two different roms. Same result
Failed.
set_metadat_recursive: some changes failed
E:Error updating updater binary in .zip '/sdcard/...zip'
Wow just wow.
Any ideas?
This was with omni and cm11. Going to try with a stock rooted rom as soon as it finished downloading.

zprovo said:
Tried two different roms. Same result
Failed.
set_metadat_recursive: some changes failed
E:Error updating updater binary in .zip '/sdcard/...zip'
Wow just wow.
Any ideas?
This was with omni and cm11. Going to try with a stock rooted rom as soon as it finished downloading.
Click to expand...
Click to collapse
look here http://forum.cyanogenmod.com/topic/86979-cm-11-20140124-set-metadata-recursive-some-changes-failed/
---------- Post added at 11:57 PM ---------- Previous post was at 11:23 PM ----------
Just get a latest version of the recovery for your device and install it.

andro ninja said:
look here http://forum.cyanogenmod.com/topic/86979-cm-11-20140124-set-metadata-recursive-some-changes-failed/
---------- Post added at 11:57 PM ---------- Previous post was at 11:23 PM ----------
Just get a latest version of the recovery for your device and install it.
Click to expand...
Click to collapse
Ok so I managed to update the recovery to TWRP v.2.6.3.4
Installing all zips is working now.
I tried many combination of cm11 with kernels from this page: http://forum.xda-developers.com/showthread.php?t=2611749
Furthest I got was cyanogenmod logo on bottoms of screen for 10 seconds then boot and looping of the same thing over and over.
Omni rom also loaded up til the logo same thing though after.
Bell stock rom is still downloading I will update when I have tried it.
Any reason why the roms would bootloop like this?
Thank you again. I cant believe the progress you have helped me make...:good: I feel like it is possible I am very close to a functional phone again (maybe just maybe hehe)

zprovo said:
Ok so I managed to update the recovery to TWRP v.2.6.3.4
Installing all zips is working now.
I tried many combination of cm11 with kernels from this page: http://forum.xda-developers.com/showthread.php?t=2611749
Furthest I got was cyanogenmod logo on bottoms of screen for 10 seconds then boot and looping of the same thing over and over.
Omni rom also loaded up til the logo same thing though after.
Bell stock rom is still downloading I will update when I have tried it.
Any reason why the roms would bootloop like this?
Thank you again. I cant believe the progress you have helped me make...:good: I feel like it is possible I am very close to a functional phone again (maybe just maybe hehe)
Click to expand...
Click to collapse
I remember I had same problem. I use to restore only the boot partition from a backup of a stock rom.
So try installing a stock rom like this one http://forum.xda-developers.com/showthread.php?t=2595586. If it works then boot into recovery and take a backup then install whatever you want to and the just restore the boot partition if your are stuck at boot logo.

zprovo said:
Ok so I managed to update the recovery to TWRP v.2.6.3.4
Installing all zips is working now.
I tried many combination of cm11 with kernels from this page: http://forum.xda-developers.com/showthread.php?t=2611749
Furthest I got was cyanogenmod logo on bottoms of screen for 10 seconds then boot and looping of the same thing over and over.
Omni rom also loaded up til the logo same thing though after.
Bell stock rom is still downloading I will update when I have tried it.
Any reason why the roms would bootloop like this?
Thank you again. I cant believe the progress you have helped me make...:good: I feel like it is possible I am very close to a functional phone again (maybe just maybe hehe)
Click to expand...
Click to collapse
Ok just finished installing the stock bell rom from the site I linked in a previous post.
Stock D803 rom with stock D803 kernel, both installed succesfully.
Phone is back to exactly how it was when I started this thread. EXCEPT that I now also have TWRP running alongside it.
So that includes:
-*#06# = IMEI Null
-phone reboots randomly every 5 to 15 seconds
-keyboard never comes up
-widgets always have a "loading" circle spinning on them
-trying to enter security and settings = auto reboot
-all other options are accesible and useable as long as no keyboard is involved since it never comes up
-no wifi
Wow, this is one hard to fix phone.
Or it simply has hardware damage. but I doubt it since it has no issues running recovery.
Any ideas?:laugh:

Droid Razr M xt907 Kitkat Update Failed

I'm using a droid razr m xt907 by verizon. Yesterday an update was released for 4.4.2 kitkat, my phone is still rooted and i can't find the safest way to unroot it so i can get the update. Does anyone know the best way to unroot and make sure everything's normal again so that the 4.4 update will work this time? It stops at around 25% into the update. Thanks for any help.
Edit: I've tried a factory restore, i unrooted completely. My kernell is normal, my stock recovery is normal. The update just isn't working, and i don't know the best way to fix it. My bootloader is locked, so there was never any custom recovery or ROM's installed.

I'm having the same problem. I unrooted before the update but still not working. The update get's to about 25% of install then fails. I've tried about 4 or 5 times today. Factory rest and uninstalling root didn't help either

mikegt11 said:
I'm having the same problem. I unrooted before the update but still not working. The update get's to about 25% of install then fails. I've tried about 4 or 5 times today. Factory rest and uninstalling root didn't help either
Click to expand...
Click to collapse
Exactly, i can't figure out what i'm supposed to do. Ive tried about that many times, and i've tried factory restoring, i've wiped the cache, etc.

Factory reset.
RSD to stock 4.1.2 in case some system app is missing.
Skip setup.
Try the update again.
Or just RSD to the new version.
Those would be my next steps.
Sent from my Nexus 7 using XDA Free mobile app

Coronado is dead said:
Factory reset.
RSD to stock 4.1.2 in case some system app is missing.
Skip setup.
Try the update again.
Or just RSD to the new version.
Those would be my next steps.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
I'll try this tomorrow when i have a chance, thank you for responding.

Coronado is dead said:
Factory reset.
RSD to stock 4.1.2 in case some system app is missing.
Skip setup.
Try the update again.
Or just RSD to the new version.
Those would be my next steps.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
do you know any good tutorials for how to use rsd for this? cuz i want to just rsd to the new version if you can help me find the files to do that, i have rsd lite already.

help
shadowwolfsl said:
do you know any good tutorials for how to use rsd for this? cuz i want to just rsd to the new version if you can help me find the files to do that, i have rsd lite already.
Click to expand...
Click to collapse
i got same problem. after download 446 mb update. try to instal. work about for 30 percent then suddenly restart and says that update failed
my device is rooted. then i remove root from the SU menu and keep failed to update
what should i do?

supercahyo said:
i got same problem. after download 446 mb update. try to instal. work about for 30 percent then suddenly restart and says that update failed
my device is rooted. then i remove root from the SU menu and keep failed to update
what should i do?
Click to expand...
Click to collapse
Personally i just modified the .xml file and loaded it via RSDLite.

shromy said:
Personally i just modified the .xml file and loaded it via RSDLite.
Click to expand...
Click to collapse
same thing that i did

Im mid process but heres the only answer ive found....
THERE IS HOPE HERE LOLZ
If ya all do let me know how the full strip and downgrade went....
If u find another way pls share info w me as well...
Lj-
Sorry all being a new user they would not let me post a link so I cut it up.......Still would not le5 me send it but u can email me directly and I'll gladly send u a direct copy or look on andromods the answer is there
---------- Post added at 08:15 PM ---------- Previous post was at 07:54 PM ----------
supercahyo said:
i got same problem. after download 446 mb update. try to instal. work about for 30 percent then suddenly restart and says that update failed
my device is rooted. then i remove root from the SU menu and keep failed to update
what should i do?
Click to expand...
Click to collapse
Step by step on andromods...and how to reroot there as well
Lj-
Sorry won't let me post links yet....

droid razr M kitkat update fail
I would like to know a solution, I'm tired of trying and do not get even with rsd lite.
this is my mail: [email protected]

galestz said:
I would like to know a solution, I'm tired of trying and do not get even with rsd lite.
this is my mail: [email protected]
Click to expand...
Click to collapse
because you have not modified the xml file after decompressing the entire zip.

It just won't work !
shadowwolfsl said:
I'm using a droid razr m xt907 by verizon. Yesterday an update was released for 4.4.2 kitkat, my phone is still rooted and i can't find the safest way to unroot it so i can get the update. Does anyone know the best way to unroot and make sure everything's normal again so that the 4.4 update will work this time? It stops at around 25% into the update. Thanks for any help.
Edit: I've tried a factory restore, i unrooted completely. My kernell is normal, my stock recovery is normal. The update just isn't working, and i don't know the best way to fix it. My bootloader is locked, so there was never any custom recovery or ROM's installed.
Click to expand...
Click to collapse
I also had a Razr M. i unroot it by SuperSU, but it won't update properly, same like others, 25%, then fail.

Steve977 said:
I also had a Razr M. i unroot it by SuperSU, but it won't update properly, same like others, 25%, then fail.
Click to expand...
Click to collapse
i got it functioning after rsd lite back to stock after a factory restore

shromy said:
because you have not modified the xml file after decompressing the entire zip.
Click to expand...
Click to collapse
I have found the solution, you have to edit the XML file that is in the ROM. and delete the lines containing the words ("oem" and "var"). then you put the phone in fastboot mode and use the rom with the modified file will have only about 18 steps then when the last file billboards will ask you turn on the phone manually and status, restart your phone and enter mode fastboot again and finished well. NOTE: remember to put the usb debugging before starting everything. everything you do will be at your own risk, but so what I Realize, and it worked and I have my razr m with kitkat and before I could not for the same reason of the root. thank you all

shadowwolfsl said:
I'm using a droid razr m xt907 by verizon. Yesterday an update was released for 4.4.2 kitkat, my phone is still rooted and i can't find the safest way to unroot it so i can get the update. Does anyone know the best way to unroot and make sure everything's normal again so that the 4.4 update will work this time? It stops at around 25% into the update. Thanks for any help.
Edit: I've tried a factory restore, i unrooted completely. My kernell is normal, my stock recovery is normal. The update just isn't working, and i don't know the best way to fix it. My bootloader is locked, so there was never any custom recovery or ROM's installed.
Click to expand...
Click to collapse
:victory::victory::victory::victory::victory:
I can resolve if u want reply me

Does it work while it is Rooted ?
galestz said:
I have found the solution, you have to edit the XML file that is in the ROM. and delete the lines containing the words ("oem" and "var"). then you put the phone in fastboot mode and use the rom with the modified file will have only about 18 steps then when the last file billboards will ask you turn on the phone manually and status, restart your phone and enter mode fastboot again and finished well. NOTE: remember to put the usb debugging before starting everything. everything you do will be at your own risk, but so what I Realize, and it worked and I have my razr m with kitkat and before I could not for the same reason of the root. thank you all
Click to expand...
Click to collapse
I'm sorry, but dows it work while my phone is rooted ? before i noticed your solution, i had to delete all root apps and SuperSU (along with the root) to update it. And Failed.

galestz said:
I have found the solution, you have to edit the XML file that is in the ROM. and delete the lines containing the words ("oem" and "var"). then you put the phone in fastboot mode and use the rom with the modified file will have only about 18 steps then when the last file billboards will ask you turn on the phone manually and status, restart your phone and enter mode fastboot again and finished well. NOTE: remember to put the usb debugging before starting everything. everything you do will be at your own risk, but so what I Realize, and it worked and I have my razr m with kitkat and before I could not for the same reason of the root. thank you all
Click to expand...
Click to collapse
im getting phone returned fail y

solution
Adriantech said:
:victory::victory::victory::victory::victory:
I can resolve if u want reply me
Click to expand...
Click to collapse
plz help me iwant your help

djdrews4357 said:
im getting phone returned fail y
Click to expand...
Click to collapse
princeabdullah1555 said:
plz help me iwant your help
Click to expand...
Click to collapse
We can't help either of you, if you don't give us details.
Sent from my HTC6525LVW using Tapatalk