I used WUGFRESH to install 5.0, rooted, installed latest TWRP.. and get ADB just fine when the N7 is normally booted. However, when using TWRP, I'm unable to get an ADB connection, normal or sideload. I noticed MTP is turned on in TWRP, which may be the problem, but don't see any want to turn it off. Any thoughts appreciated! thanks, jf
EDIT: ADB works fine if I use CM Recovery, but can't format to F2FS with CM, which is why I want to use TWRP.
EDIT: I found out how to turn off MTP, its under MOUNT, but that did not fix the problem.
friedsonjm said:
EDIT: I found out how to turn off MTP, its under MOUNT, but that did not fix the problem.
Click to expand...
Click to collapse
That worked for me. MTP goes away, and boom! adb comes right up seconds later. (twrp v2.8.1.0 iirc)
I'm not sure if TWRP stores it's settings in the ".twrps" file or not, but it seems to remember you've toggled that button the next time you boot it. Probably that lasts until the next time /data is fully wiped.
Related
I unlocked bootloader and rooted last night fine, this morning i was trying to flash cmod 10.2 through twrp and it said could not find md5 when flashing then it said it was flashed successfully. I did wipe the cache and dalvik and did a factory reset prior to attempting to flash. Yet when i hit reboot it only shows the google logo then the screen goes black and flickers between dark black and black. I know it takes time to boot the first time so i let it sit for 10 mins and nothing. Everything was working fine before this, the device still boots into fastboot mode and and i can get to twrp anything i can try through that ? Or is efants guide the only way to fix this. No Nandroid backup so ya i hate myself :crying:
BrownPride said:
I unlocked bootloader and rooted last night fine, this morning i was trying to flash cmod 10.2 through twrp and it said could not find md5 when flashing then it said it was flashed successfully. I did wipe the cache and dalvik and did a factory reset prior to attempting to flash. Yet when i hit reboot it only shows the google logo then the screen goes black and flickers between dark black and black. I know it takes time to boot the first time so i let it sit for 10 mins and nothing. Everything was working fine before this, the device still boots into fastboot mode and and i can get to twrp anything i can try through that ? Or is efants guide the only way to fix this. No Nandroid backup so ya i hate myself :crying:
Click to expand...
Click to collapse
Couple of things I would try first, re download CM 10.2 just to make sure you don't have a bad download and make sure you downloaded the correct file. Due your normal wipes then reflash. btw I never check the md5 box when flashing with TWRP. As long as you can get into recovery you should able to fix and always make a back up.
Ok i will give your suggestions a try and post back in a bit. Thanks for your help
If it's the CM10.2 nightly from 20130906, it's a known issue with it not booting. Flash an older nightly or another ROM.
I was unaware of the issues with this versioni thanks for that info. I can not push the zip file through adb i says device is offline, is there anyway to push the older cmod version through fastboot and install it with twrp on device ?
I miss having a device with a removable sdcard
BrownPride said:
I was unaware of the issues with this versioni thanks for that info. I can not push the zip file through adb i says device is offline, is there anyway to push the older cmod version through fastboot and install it with twrp on device ?
I miss having a device with a removable sdcard
Click to expand...
Click to collapse
Yup use adb sideload in TWRP : adb sideload path to rom/namerom.zip. Link http://teamw.in/ADBSideload.
Thank you for your response, going to follow the steps in the link hopefully i can solve this problem
Thank you all for your kind help and patience i was able to get cmod20130905 to flash through adb sideload and everything is working fine. First thing i did after it booted successfully was go back into twrp and make a backup Thanks again
I am trying to flash my N4 with cyanogenmod following the official wiki.
I'm at the point where I've installed TWRP into recovery, I've wiped everything (I've even formatted them since I couldn't wipe all of it initially), and the only error I see is "unable to mount /usb-otg".
Then, I've "installed" the CN zip files for the 13 and 12 versions, none of them works in the sense that when I reboot the system, I'm always coming back to TWRP.
What's wrong? Any suggestion?
Thanks
I've the same problems with my nexus 4
gerardgerard said:
I am trying to flash my N4 with cyanogenmod following the official wiki.
I'm at the point where I've installed TWRP into recovery, I've wiped everything (I've even formatted them since I couldn't wipe all of it initially), and the only error I see is "unable to mount /usb-otg".
Then, I've "installed" the CN zip files for the 13 and 12 versions, none of them works in the sense that when I reboot the system, I'm always coming back to TWRP.
What's wrong? Any suggestion?
Thanks
Click to expand...
Click to collapse
Hi gerardgerard,
I also wanted to flash my Nexus 4 with Cyanogenmod 12.1. So I installed TWRP into recovery and wiped everything, like it's explained in the wiki. I can also see the error "unable to mount /usb-otg". When I want to reboot the system I always get back to TWRP. Cyanogenmod doesn't boot correctly. Did you find a solution for the problem?
same problem
Hi
I'm having the same problem. As follows:
Cause (my mistake): I have been using Cyanogen-mod nightlies for a couple of months on my Nexus 4, and made the grave mistake of leaving the phone to upgrade one night but without it being plugged in properly - and it ran out of power part way through! (At least, that's what I think happened).
Fortunately, it would boot into bootloader and I could use adb/fastboot. I (re)installed TWRP 2.8.7.0 (from my Mac, using fastboot). And that works fine - I can boot into twrp ok.
Next I loaded the latest nightly from cm (using fastboot - is this what people call sideloading?) and used twrp to install it. It goes through the installation fine (the only error message is that it can't mount /usb-otg). But when I reboot it just goes back to twrp.
I then tried installing the earlier cm nightly that I know worked, but with the same result.
Finally, before I first installed cm I did a backup (using twrp), and I have tried recovering that. It seems to do all the right things, but again when I reboot it just goes back to twrp.
Any suggestions would be welcome.
Thanks
J
Flash back to a completely stock ROM and run through the set up to make sure everything works. Then copy CM to the phone, reboot to fastboot, flash twrp, immediately boot into recovery using the volume and power button without leaving fastboot, wipe data, cache, system, flash CM, reboot.
If the phone will not boot after flashing a stock ROM, boot to fastboot, flash the userdata.img file, and immediately go to stock recovery without leaving fastboot, wipe data/cache, reboot.
It works now!
I managed to fix the problem ... I found this guide for the Nexus 5:
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
and I applied those instructions. It didn't work first time, so I just repeated them and now it's working. I used the 5.1.1 stock downloaded from https://developers.google.com/android/nexus/images#occam.
I guess this is what audit13 means in their post - so thanks are due there.
I will next reinstall twrp and cm and I don't expect any problems with that (having done it successfully before).
Smaje
So after exhausting all options, I turn to the experts for help. I have a friend in the UK, who wanted to downgrade his Galaxy s5 g900f 5.0 to 4.4. He's familiar enough with basic odin/recovery use, but only vaguely.
He wanred to downgrade, so I had him flash TWRP 2.8.7.0 via Odin. All went well. I then had him make a full back up, boot, system, data etc. He has no sd card, so after the back up I had him move his entire internal storage (except the back up) to his pc. Then we downloaded OmegaDroid v13 (4.4) for the g900f. Flashing went as expected to start, did full wipe, flashed the zip (aroma installer). The two options for kernel choice with this ROM or stock kernel or Omega kernel. Flashing with stock kernel sends the phone into an infinite bootloop, flashing with the omega kernel never boots at all (black screen with blue led on, I had him leave it like this for an hour to make sure). So I told him to restore his back up until we can find another 4.4 to try. Well restore fails every time.
No problem, I thought, we can mount usb or use adb sideload. So I had him download CM 11. Had him boot to recovery and mount usb while connected to pc. The box wont check, just no response. So I got him to download adb and drivers, had him verify his isntall. The problem here is adb devices lists no device. Odin however can communicate with it.
Am I missing something. Is there a way to turn on USB debugging from twrp or the terminal in twrp? Or is there an odin flashable rooted 4.4 rom available for the g900f that anyone is aware of. My google searches have come up with no answers to these. 4.4 roms in general for this device are few and far between. Ive told him he may have no choice but to go and get a sd card, as this would make life much easier, but it still bothers me that adb cant see the device at all, yet odin can.
Thanks for help in advance.
So I would have asked this question directly in the DirtySanta thread, but apparently I don't have enough posts to actually do anything there yet.
So my device is now in a rather bizzare zombie state. I did manage to get my device fully rooted with TWRP installed. Followed the instructions on how to get everything working with no problems. I ended up wanting to try to flash some audio mods (V4A and such), however they did not install properly, so I went and did what anyone else would do - restored to a full backup I made of the device before I started mucking about.
The restore did complete successfully, and I still have a device that has a working recovery, and an OS with root permission...but I can't flash anything anymore from TWRP. TWRP is unable to mount the /system partition after the restore, and seems convinced that I have no OS installed, even though there is one and the phone boots into it just fine. The restore I'm on now is post-flashing the Konverged Kernel. Attempting to restore to an even earlier backup (one I made just before flashing Konverged) produces similar results - the restore succeeds and produces a bootable phone, but TWRP still can't flash anything.
Just to cover bases I also tried running "fastboot flash recovery twrp-3.0.2-1-us996.img" again in case TWRP got messed up (trying to get the "Swipe to allow system changes" prompt to reappear - it didn't), with no changes - TWRP still works fine, but cant mount and edit /system and still claims I have no OS installed when requesting a reboot.
Any advice on how to get things working again would be greatly appreciated! Thanks!
This may be an issue with TWRP. When I had my Galaxy S3 rooted back in the day I would have this issue, also with a Nexus tablet I rooted as well. It turns out I needed to flash a specific "fixed" version of TWRP to fix the mount/flash issue. That was a long time ago though, so this might not be the problem, but I thought I would at least tell you my experience.
Sent from my LG-LS997 using Tapatalk
biglightbt said:
So I would have asked this question directly in the DirtySanta thread, but apparently I don't have enough posts to actually do anything there yet.
So my device is now in a rather bizzare zombie state. I did manage to get my device fully rooted with TWRP installed. Followed the instructions on how to get everything working with no problems. I ended up wanting to try to flash some audio mods (V4A and such), however they did not install properly, so I went and did what anyone else would do - restored to a full backup I made of the device before I started mucking about.
The restore did complete successfully, and I still have a device that has a working recovery, and an OS with root permission...but I can't flash anything anymore from TWRP. TWRP is unable to mount the /system partition after the restore, and seems convinced that I have no OS installed, even though there is one and the phone boots into it just fine. The restore I'm on now is post-flashing the Konverged Kernel. Attempting to restore to an even earlier backup (one I made just before flashing Konverged) produces similar results - the restore succeeds and produces a bootable phone, but TWRP still can't flash anything.
Just to cover bases I also tried running "fastboot flash recovery twrp-3.0.2-1-us996.img" again in case TWRP got messed up (trying to get the "Swipe to allow system changes" prompt to reappear - it didn't), with no changes - TWRP still works fine, but cant mount and edit /system and still claims I have no OS installed when requesting a reboot.
Any advice on how to get things working again would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
I beleive you have to do Dirty Santa over again....The steps that is.
biglightbt said:
So I would have asked this question directly in the DirtySanta thread, but apparently I don't have enough posts to actually do anything there yet.
So my device is now in a rather bizzare zombie state. I did manage to get my device fully rooted with TWRP installed. Followed the instructions on how to get everything working with no problems. I ended up wanting to try to flash some audio mods (V4A and such), however they did not install properly, so I went and did what anyone else would do - restored to a full backup I made of the device before I started mucking about.
The restore did complete successfully, and I still have a device that has a working recovery, and an OS with root permission...but I can't flash anything anymore from TWRP. TWRP is unable to mount the /system partition after the restore, and seems convinced that I have no OS installed, even though there is one and the phone boots into it just fine. The restore I'm on now is post-flashing the Konverged Kernel. Attempting to restore to an even earlier backup (one I made just before flashing Konverged) produces similar results - the restore succeeds and produces a bootable phone, but TWRP still can't flash anything.
Just to cover bases I also tried running "fastboot flash recovery twrp-3.0.2-1-us996.img" again in case TWRP got messed up (trying to get the "Swipe to allow system changes" prompt to reappear - it didn't), with no changes - TWRP still works fine, but cant mount and edit /system and still claims I have no OS installed when requesting a reboot.
Any advice on how to get things working again would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
So your phone isn't booting beyond TWRP? I'm assuming that's what you are saying. I only want clarification because you mentioned how it won't flash anything.
Try this. Go to "mount" and make sure system is checked. Then power off the device. Then use the button combo to boot back into recovery. It's power + volume down, as soon you see the LG logo let go of the power button and then press it again and hold it (never let go of the volume down button though). If done correctly you'll get a white screen asking you if you want to factory reset. Choose yes for both questions. This will boot you back into recovery. Once in recovery again go back to mount and check system again. Now reboot system. This method got me out of being stuck in TWRP after I had tried every other method I could think of.
PS. Make sure you are on a fully stock version of the ROM that came on your phone. This may work for any backup you have but just incase use the most stock version backup you have.
imucarmen said:
So your phone isn't booting beyond TWRP? I'm assuming that's what you are saying. I only want clarification because you mentioned how it won't flash anything.
Try this. Go to "mount" and make sure system is checked. Then power off the device. Then use the button combo to boot back into recovery. It's power + volume down, as soon you see the LG logo let go of the power button and then press it again and hold it (never let go of the volume down button though). If done correctly you'll get a white screen asking you if you want to factory reset. Choose yes for both questions. This will boot you back into recovery. Once in recovery again go back to mount and check system again. Now reboot system. This method got me out of being stuck in TWRP after I had tried every other method I could think of.
PS. Make sure you are on a fully stock version of the ROM that came on your phone. This may work for any backup you have but just incase use the most stock version backup you have.
Click to expand...
Click to collapse
Sorry if I wasn't clear, its a bit confusing to me also. Normally TWRP saying you have No OS installed is pretty bad news, but it seems to be a bit confused itself, since there IS and OS installed, and the phone boots into it.
The phone basically works exactly as you'd expect after the DirtySanta exploit. It can boot into whatever backup I restore it back to, and works just fine, root included. I can also boot into TWRP just fine also..... Its just that within TWRP, if I try to flash anything at all (apps, zip files, kernels) it comes back with an error just after "Updating Partition Details". The specific error is "failed to mount /system (invalid argument)". If I had to guess I'd think that /system was somehow marked as Read Only after I did the restore. I haven't needed to use the button combos for anything since ADB and Fastboot commands all work just fine too.
If I go into the "Mount" section in TWRP "System" is unchecked, if I tap it to try to check it the phone vibrates as if it accepted the input, but the check never appears. If I select "Mount System as Read Only" I can mount it though. I followed the instructions in the DirtySanta thread to a T, and am using all the recommended software versions.
I also tried restoring back to the backup I made just before flashing Konverged Kernel, with similar results. The restore works, and the phone boots into Android, but if I try to pick up where I left off and flash Konverged again from within TWRP, it fails with the "failed to mount /system (invalid argument)" again.
biglightbt said:
Sorry if I wasn't clear, its a bit confusing to me also. Normally TWRP saying you have No OS installed is pretty bad news, but it seems to be a bit confused itself, since there IS and OS installed, and the phone boots into it.
The phone basically works exactly as you'd expect after the DirtySanta exploit. It can boot into whatever backup I restore it back to, and works just fine, root included. I can also boot into TWRP just fine also..... Its just that within TWRP, if I try to flash anything at all (apps, zip files, kernels) it comes back with an error just after "Updating Partition Details". The specific error is "failed to mount /system (invalid argument)". If I had to guess I'd think that /system was somehow marked as Read Only after I did the restore. I haven't needed to use the button combos for anything since ADB and Fastboot commands all work just fine too.
If I go into the "Mount" section in TWRP "System" is unchecked, if I tap it to try to check it the phone vibrates as if it accepted the input, but the check never appears. If I select "Mount System as Read Only" I can mount it though. I followed the instructions in the DirtySanta thread to a T, and am using all the recommended software versions.
I also tried restoring back to the backup I made just before flashing Konverged Kernel, with similar results. The restore works, and the phone boots into Android, but if I try to pick up where I left off and flash Konverged again from within TWRP, it fails with the "failed to mount /system (invalid argument)" again.
Click to expand...
Click to collapse
I would run the dirtysanta exploit again from the beginning. Your assumption about being stuck in read only seems correct. I'm guessing you might have chosen read only on accident one time when you booted into TWRP and now it's stuck there.
Or you could try using flashfire to flash the TWRP.img
I am having the same issue. I tried doing the DAC mod that enables high impedance as always on. Audio quit working along with the stock music app. Did a restore from after I flashed the konverged kernel. And now no r/w ability and twrp will not mount system unless I check mount as read only. I was able to reinstall supersu from the recovery. But still have the issues.
Only thing I can think of is waiting for a return to stock unrooted method to Come out and re-root.
biglightbt said:
So I would have asked this question directly in the DirtySanta thread, but apparently I don't have enough posts to actually do anything there yet.
So my device is now in a rather bizzare zombie state. I did manage to get my device fully rooted with TWRP installed. Followed the instructions on how to get everything working with no problems. I ended up wanting to try to flash some audio mods (V4A and such), however they did not install properly, so I went and did what anyone else would do - restored to a full backup I made of the device before I started mucking about.
The restore did complete successfully, and I still have a device that has a working recovery, and an OS with root permission...but I can't flash anything anymore from TWRP. TWRP is unable to mount the /system partition after the restore, and seems convinced that I have no OS installed, even though there is one and the phone boots into it just fine. The restore I'm on now is post-flashing the Konverged Kernel. Attempting to restore to an even earlier backup (one I made just before flashing Konverged) produces similar results - the restore succeeds and produces a bootable phone, but TWRP still can't flash anything.
Just to cover bases I also tried running "fastboot flash recovery twrp-3.0.2-1-us996.img" again in case TWRP got messed up (trying to get the "Swipe to allow system changes" prompt to reappear - it didn't), with no changes - TWRP still works fine, but cant mount and edit /system and still claims I have no OS installed when requesting a reboot.
Any advice on how to get things working again would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
Hey I was having the same problem and I fixed it myself messing around with a few things I could think of.
Here it is pasted from another thread.
Dinked around with a few ideas and got my problem fixed! Heres what I did.
1. Made a backup of system in twrp just in case.
2. Formatted system in wipe > advanced > and only checked system.
Panicked because I thought I bricked my device, wouldnt boot farther than the lg logo,
(next steps might be unnecessary but I panicked and tried them lol)
3. still had fastboot access so I repeated step 3 in the root method.
4. Reflashed boot2.img
5. Rebooted to recovery with volume- power, release power while keeping volume- at lg for a second then repress and hold power. Yes twice to get to recovery.
6. Restored system backup. (was able to fully boot now but with lag)
7. Reflashed konverged kernel.
And everything is working perfect now and I have my r/w ability and can mount system in recovery without having to select mount as read only.
---------- Post added at 09:57 AM ---------- Previous post was at 09:10 AM ----------
You can probably just wipe your system like I said in the previous post then Just restore it. I panicked and did a bunch of extra stuff. I realized that when I did my initial backup of my system, or said that its size was about 126247251477482716MB. So I'm guessing when I did my restore (possibly what happened to yours) that it somehow messed up the system.
So I installed TWRP recovery using tuliptool and all that, but didn't bother with bootloader unlocking since it said it's not needed. So I tried to install Magisk using the instructions on their thread but after booting it asks me to reset my phone because the data got corrupted.
Luckily I had backed everything up beforehand, so I restored boot image and everything works fine again. Just wanted to know what I did wrong here. Did I miss any steps?
auxillium said:
So I installed TWRP recovery using tuliptool and all that, but didn't bother with bootloader unlocking since it said it's not needed. So I tried to install Magisk using the instructions on their thread but after booting it asks me to reset my phone because the data got corrupted.
Luckily I had backed everything up beforehand, so I restored boot image and everything works fine again. Just wanted to know what I did wrong here. Did I miss any steps?
Click to expand...
Click to collapse
You probably didn't miss anything if it's the "Your device is corrupt. It can’t be trusted and may not work properly” error, I get the same thing. You messed with the files in the boot partition so ZTE's "safety" features in the stock ROM automatically call them corrupted. I simply hit the power button and continue to boot, my device works fine (actually much better than before being rooted with Magisk). I'm the one who "corrupted" the phone on purpose, so I'm comfortable it's fine. If you're getting another message, I'm not entirely sure why. Maybe try ADB sideloading Magisk in TWRP, it's what "worked" for me.
marvelljones said:
You probably didn't miss anything if it's the "Your device is corrupt. It can’t be trusted and may not work properly” error, I get the same thing. You messed with the files in the boot partition so ZTE's "safety" features in the stock ROM automatically call them corrupted. I simply hit the power button and continue to boot, my device works fine (actually much better than before being rooted with Magisk). I'm the one who "corrupted" the phone on purpose, so I'm comfortable it's fine. If you're getting another message, I'm not entirely sure why. Maybe try ADB sideloading Magisk in TWRP, it's what "worked" for me.
Click to expand...
Click to collapse
What do you mean by "hitting the power button and continue to boot"? When I hit the power button on the "Decryption unsuccessful" screen it just locks and unlocks like normal, but stays there.
Ok I managed to install Magisk after factory reset, but after that my sdcard is not being recognized anymore (but is recognizable in TWRP). So I decided to restore the backup i had, and rebooted. But now I'm stuck on the ZTE logo during boot. I can still open TWRP, though. I've tried wiping system, data, and cache, then restoring the backup, also no good. For now I'm downloading the stock firmware and will try that. Any ideas on how I can fix this before I flash the stock firmware?
EDIT: Ok I managed to fix it by installing the no verity boot image instead. Boots again. I'll probably refrain from trying to root for now. Thanks for the help.
auxillium said:
Ok I managed to install Magisk after factory reset, but after that my sdcard is not being recognized anymore (but is recognizable in TWRP). So I decided to restore the backup i had, and rebooted. But now I'm stuck on the ZTE logo during boot. I can still open TWRP, though. I've tried wiping system, data, and cache, then restoring the backup, also no good. For now I'm downloading the stock firmware and will try that. Any ideas on how I can fix this before I flash the stock firmware?
EDIT: Ok I managed to fix it by installing the no verity boot image instead. Boots again. I'll probably refrain from trying to root for now. Thanks for the help.
Click to expand...
Click to collapse
Well, I wasn't much help, but it sounds like your overall problem was different than mine. My only advice is if you attempt to root with Magisk again, is to connect to your PC/Mac/etc with a cable, use the Advanced menu in TWRP, choose ADB sideload, and sideload Magisk from your PC/Mac/etc. You can find a more advanced explanations on various websites how to use ADB if you don't already know how. For some reason that worked for me and gave me full Magisk and phone functionality when nothing else did.
marvelljones said:
Well, I wasn't much help, but it sounds like your overall problem was different than mine. My only advice is if you attempt to root with Magisk again, is to connect to your PC/Mac/etc with a cable, use the Advanced menu in TWRP, choose ADB sideload, and sideload Magisk from your PC/Mac/etc. You can find a more advanced explanations on various websites how to use ADB if you don't already know how. For some reason that worked for me and gave me full Magisk and phone functionality when nothing else did.
Click to expand...
Click to collapse
Will this allow me to install magisk without a factory reset?
auxillium said:
Will this allow me to install magisk without a factory reset?
Click to expand...
Click to collapse
I didn't have to, but I can't guarantee it will work for you. I had previously factory reset my phone but at the time I sideloaded Magisk I had been using the phone for at least a week. Just make a backup of everything first to be safe. *edit* I am using the beta version of Magisk (16.4), not sure if that's making a difference.