[Q] Nexus 4 Bricked ? - Nexus 4 Q&A, Help & Troubleshooting

I unlocked bootloader and rooted last night fine, this morning i was trying to flash cmod 10.2 through twrp and it said could not find md5 when flashing then it said it was flashed successfully. I did wipe the cache and dalvik and did a factory reset prior to attempting to flash. Yet when i hit reboot it only shows the google logo then the screen goes black and flickers between dark black and black. I know it takes time to boot the first time so i let it sit for 10 mins and nothing. Everything was working fine before this, the device still boots into fastboot mode and and i can get to twrp anything i can try through that ? Or is efants guide the only way to fix this. No Nandroid backup so ya i hate myself :crying:

BrownPride said:
I unlocked bootloader and rooted last night fine, this morning i was trying to flash cmod 10.2 through twrp and it said could not find md5 when flashing then it said it was flashed successfully. I did wipe the cache and dalvik and did a factory reset prior to attempting to flash. Yet when i hit reboot it only shows the google logo then the screen goes black and flickers between dark black and black. I know it takes time to boot the first time so i let it sit for 10 mins and nothing. Everything was working fine before this, the device still boots into fastboot mode and and i can get to twrp anything i can try through that ? Or is efants guide the only way to fix this. No Nandroid backup so ya i hate myself :crying:
Click to expand...
Click to collapse
Couple of things I would try first, re download CM 10.2 just to make sure you don't have a bad download and make sure you downloaded the correct file. Due your normal wipes then reflash. btw I never check the md5 box when flashing with TWRP. As long as you can get into recovery you should able to fix and always make a back up.

Ok i will give your suggestions a try and post back in a bit. Thanks for your help

If it's the CM10.2 nightly from 20130906, it's a known issue with it not booting. Flash an older nightly or another ROM.

I was unaware of the issues with this versioni thanks for that info. I can not push the zip file through adb i says device is offline, is there anyway to push the older cmod version through fastboot and install it with twrp on device ?
I miss having a device with a removable sdcard

BrownPride said:
I was unaware of the issues with this versioni thanks for that info. I can not push the zip file through adb i says device is offline, is there anyway to push the older cmod version through fastboot and install it with twrp on device ?
I miss having a device with a removable sdcard
Click to expand...
Click to collapse
Yup use adb sideload in TWRP : adb sideload path to rom/namerom.zip. Link http://teamw.in/ADBSideload.

Thank you for your response, going to follow the steps in the link hopefully i can solve this problem

Thank you all for your kind help and patience i was able to get cmod20130905 to flash through adb sideload and everything is working fine. First thing i did after it booted successfully was go back into twrp and make a backup Thanks again

Related

[Q] TWRP nor CWM will successfully wipe/format data

First, I searched and read all relevant threads concerning this issue. The five threads that showed up in the search did not help me solve my issue.
So on to my problem. I can no longer flash any rom onto my device. I attempted to flash the first official CM10 nightly (which I recently found out was not flashing properly for others) and had no success. I simply got a black screen and nothing more. I eventually got back into TWRP (v2.2.1.4) to try and Nandroid restore, but I noticed that /data was not formatting and the restore failed. Every time I would slide the bar across to confirm the restore TWRP would reboot itself. I then flashed CWM (v6.0.1.0) and the same problems were there. After that I flashed an earlier version of TWRP and successfully restored the backup. I'm not 100% sure how it was successful. So I decided to try flashing another ROM and no go. Same problems. Anyone have any ideas? When I was using CWM I got the error message below.
Code:
E: unable to locate volume information
E: unable to open ums lunfile '/sys/devices/platform/usb_mass_storage/lun0/file'
E: unable to format data
I'm running Bugless Beast with Motley #219
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
aznxk3vi17 said:
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
What rom did you attempt to flash?
elementur said:
What rom did you attempt to flash?
Click to expand...
Click to collapse
So do I.I attempted to flash the first official CM10 8.18 nightly and had no success. I just got a black screen.Even more I boot into bootloader and choose to boot into recover but just stay at google logo.I try to flash recover once more,but just can't boot into recover!!
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Shano56 said:
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Click to expand...
Click to collapse
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
phiracle said:
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
Click to expand...
Click to collapse
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
android1234567 said:
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
Click to expand...
Click to collapse
Thank You Very Much!!!
I am having much the same problem as the OP. I finally rooted my Nexus 7 using WugFresh's Nexus Root Toolkit. It seemed all went well. I chose to use TWRP in a first attempt to install a ROM (I was on rooted stock), and following the instructions for installing my chosen ROM I went into it to wipe cache, Dalvic Cache and data. Both cache and dalvic cache wiped without issue, but when I attempted to wipe /data TWRP simply reported that it failed. With that failing, I did not attempt to install a rom. I was still able to boot out of recovery, but even with repeated attempts wiping data always failed. Is any one aware of any solution or have any suggestions. Thank you!

Trying to install cyanogenmod to nexus 4, I cannot flash it through TWRP recovery

I am trying to flash my N4 with cyanogenmod following the official wiki.
I'm at the point where I've installed TWRP into recovery, I've wiped everything (I've even formatted them since I couldn't wipe all of it initially), and the only error I see is "unable to mount /usb-otg".
Then, I've "installed" the CN zip files for the 13 and 12 versions, none of them works in the sense that when I reboot the system, I'm always coming back to TWRP.
What's wrong? Any suggestion?
Thanks
I've the same problems with my nexus 4
gerardgerard said:
I am trying to flash my N4 with cyanogenmod following the official wiki.
I'm at the point where I've installed TWRP into recovery, I've wiped everything (I've even formatted them since I couldn't wipe all of it initially), and the only error I see is "unable to mount /usb-otg".
Then, I've "installed" the CN zip files for the 13 and 12 versions, none of them works in the sense that when I reboot the system, I'm always coming back to TWRP.
What's wrong? Any suggestion?
Thanks
Click to expand...
Click to collapse
Hi gerardgerard,
I also wanted to flash my Nexus 4 with Cyanogenmod 12.1. So I installed TWRP into recovery and wiped everything, like it's explained in the wiki. I can also see the error "unable to mount /usb-otg". When I want to reboot the system I always get back to TWRP. Cyanogenmod doesn't boot correctly. Did you find a solution for the problem?
same problem
Hi
I'm having the same problem. As follows:
Cause (my mistake): I have been using Cyanogen-mod nightlies for a couple of months on my Nexus 4, and made the grave mistake of leaving the phone to upgrade one night but without it being plugged in properly - and it ran out of power part way through! (At least, that's what I think happened).
Fortunately, it would boot into bootloader and I could use adb/fastboot. I (re)installed TWRP 2.8.7.0 (from my Mac, using fastboot). And that works fine - I can boot into twrp ok.
Next I loaded the latest nightly from cm (using fastboot - is this what people call sideloading?) and used twrp to install it. It goes through the installation fine (the only error message is that it can't mount /usb-otg). But when I reboot it just goes back to twrp.
I then tried installing the earlier cm nightly that I know worked, but with the same result.
Finally, before I first installed cm I did a backup (using twrp), and I have tried recovering that. It seems to do all the right things, but again when I reboot it just goes back to twrp.
Any suggestions would be welcome.
Thanks
J
Flash back to a completely stock ROM and run through the set up to make sure everything works. Then copy CM to the phone, reboot to fastboot, flash twrp, immediately boot into recovery using the volume and power button without leaving fastboot, wipe data, cache, system, flash CM, reboot.
If the phone will not boot after flashing a stock ROM, boot to fastboot, flash the userdata.img file, and immediately go to stock recovery without leaving fastboot, wipe data/cache, reboot.
It works now!
I managed to fix the problem ... I found this guide for the Nexus 5:
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
and I applied those instructions. It didn't work first time, so I just repeated them and now it's working. I used the 5.1.1 stock downloaded from https://developers.google.com/android/nexus/images#occam.
I guess this is what audit13 means in their post - so thanks are due there.
I will next reinstall twrp and cm and I don't expect any problems with that (having done it successfully before).
Smaje

Screen stuck on preparing to start.. starting app.. after flashing crdroid 6.0.1

I had rooted my phone by unlocking the bootloader using adb fastboot method, then flashing the TWRP revocery V2.8.7.0, and then flashing superSU v2.46.
After rebooting my yureka plus, and going to recovery it started cynogen recovery only, even though update cynogen recovery option was disabled.
So I flashed TWRP again and without rebooting again, just flashed crDroidAndroid-6.0.1-20160827-tomato.zip and GApps zip file from internal memory. The phone rebooted and worked fine after that..
but while playing a game the phone automatically rebooted and ever since have been stuck on Preparing to start.. Starting apps..
I had disabled the developer options because I thought it was working fine.
The phone is working behind the preparing to start screen.. I can hear the message notification and caller ringtone when someone messages or calls.
Any suggestions what I should do now? I have tried doing a factory reset from recovery but the problem persists.
khushboop said:
I had rooted my phone by unlocking the bootloader using adb fastboot method, then flashing the TWRP revocery V2.8.7.0, and then flashing superSU v2.46.
After rebooting my yureka plus, and going to recovery it started cynogen recovery only, even though update cynogen recovery option was disabled.
So I flashed TWRP again and without rebooting again, just flashed crDroidAndroid-6.0.1-20160827-tomato.zip and GApps zip file from internal memory. The phone rebooted and worked fine after that..
but while playing a game the phone automatically rebooted and ever since have been stuck on Preparing to start.. Starting apps..
I had disabled the developer options because I thought it was working fine.
The phone is working behind the preparing to start screen.. I can hear the message notification and caller ringtone when someone messages or calls.
Any suggestions what I should do now? I have tried doing a factory reset from recovery but the problem persists.
Click to expand...
Click to collapse
Try flashing it with stock rom or simple wipe the whole system and cache from twrp from advance wipe option ( but backup first ) and again flash the custom rom u used previously.
sk.shehbaz said:
Try flashing it with stock rom or simple wipe the whole system and cache from twrp from advance wipe option ( but backup first ) and again flash the custom rom u used previously.
Click to expand...
Click to collapse
It still opens in cyanogen recovery only, and there is no option for wiping dalvik cache or system. Since the usb debugging is of,f I cannot used cmd to flash twrp recovery again. By the way I still don't understand why twrp recovery is not loading.
khushboop said:
It still opens in cyanogen recovery only, and there is no option for wiping dalvik cache or system. Since the usb debugging is of,f I cannot used cmd to flash twrp recovery again. By the way I still don't understand why twrp recovery is not loading.
Click to expand...
Click to collapse
Get into fastboot and flash the stock rom via fastboot method.
I hope this guide can help u out
http://www.thetechnotriad.com/393/how-to-unbrick-yu-yureka/
sk.shehbaz said:
Get into fastboot and flash the stock rom via fastboot method.
I hope this guide can help u out
thetechnotriad.com/393/how-to-unbrick-yu-yureka/
Click to expand...
Click to collapse
Phone's hard bricked now.. even though I downloaded the flashing tools for lollipop from YUPlayGod's github page.
khushboop said:
Phone's hard bricked now.. even though I downloaded the flashing tools for lollipop from YUPlayGod's github page.
Click to expand...
Click to collapse
I still have no idea why it got bricked. So after searching on google and youtube I came across this: https://androidmtk.com/download-yu-stock-rom-for-all-models . I followed the steps and now KitKat is running except launcher is not working, instead play store open's every time I try to go to home screen. So tried the nova launcher but that still doesn't work with home button, have to open through playstore->my apps, every time. But rest is working.
sk.shehbaz said:
Get into fastboot and flash the stock rom via fastboot method.
I hope this guide can help u out
http://www.thetechnotriad.com/393/how-to-unbrick-yu-yureka/
Click to expand...
Click to collapse
dude!! i tried the above method and thankfully my phone is working now the only major problem now is whatsapp is not opening...when clicked opens for 0.01 sec and returns back to previous screen (flashes) ....please somebody help me with this. Anybody can help me, Thanks in Advance.

Bricked but still have twrp

Hey guys,
so I tried flashing Omni 8.0 rom and I was stuck at the boot screen. so I went back into twrp tried to reflash still nothing. I flashed a new version of twrp the one that can use multirom and it erased all my data. I flashed back the twrp I started with and now I can not sideload the full OTA zip to get back to stock. It says "cannot load one.zip" which is what I have it labeled as. I tried to download the recovery tool and I can't seem to figure out how to get the driver to work so it will see me on my comm port. Does anyone have any ideas on what to do or what happened? I'm stuck in twrp.
almost looks like it can't mount the system
IDK, maybe a broken download. I'd try to restore a backup if you have one, if not Wipe > Factory Reset. If it still doesn't boot after 20 minutes, refer to this thread: https://forums.oneplus.net/threads/i-have-to-go-back-to-oxygen-os.649947/#post-16907420. Basically, download the OOS ROM onto your computer and use an ADB/USB Sideload in TWRP recovery (you can flash Oxygen Recovery from TWRP if TWRP doesn't work) to install it. May take a while to boot.
I have no idea how it happened but I got my system mounted again that was my problem. I'm back.
thread can be closed
keeganjk said:
IDK, maybe a broken download. I'd try to restore a backup if you have one, if not Wipe > Factory Reset. If it still doesn't boot after 20 minutes, refer to this thread: https://forums.oneplus.net/threads/i-have-to-go-back-to-oxygen-os.649947/#post-16907420. Basically, download the OOS ROM onto your computer and use an ADB/USB Sideload in TWRP recovery (you can flash Oxygen Recovery from TWRP if TWRP doesn't work) to install it. May take a while to boot.
Click to expand...
Click to collapse
thanks for the reply mate
snipeez1987 said:
thanks for the reply mate
Click to expand...
Click to collapse
yw
snipeez1987 said:
Hey guys,
so I tried flashing Omni 8.0 rom and I was stuck at the boot screen. so I went back into twrp tried to reflash still nothing. I flashed a new version of twrp the one that can use multirom and it erased all my data. I flashed back the twrp I started with and now I can not sideload the full OTA zip to get back to stock. It says "cannot load one.zip" which is what I have it labeled as. I tried to download the recovery tool and I can't seem to figure out how to get the driver to work so it will see me on my comm port. Does anyone have any ideas on what to do or what happened? I'm stuck in twrp.
Click to expand...
Click to collapse
Easy fix for "Cannot load xxx.rom": you have to patch the adb.exe with a large address awareness program. Google it, I found one in another XDA thread.
Reason: the ROM filesize is too large. For small ROMs (like custom ROMs) adb would recognise it without any problems.
ipredatorv said:
Easy fix for "Cannot load xxx.rom": you have to patch the adb.exe with a large address awareness program. Google it, I found one in another XDA thread.
Reason: the ROM filesize is too large. For small ROMs (like custom ROMs) adb would recognise it without any problems.
Click to expand...
Click to collapse
Awesome. I'll keep that in mind. I'm sure I'll mess it up again lol. Hopefully not though.

[PROBLEM] Stuck on Android One logo

Hey!
I installed LineageOs on my Xiaomi Mi A1, everything went okay but when I installed the Gapps, it got stuck on the LineageOs logo. The volume button wasn't working right, yet somehow, I manage to enter TWRP and wipe that OS and restore the backup with the original Android One. But when I boot it, it got stuck on Android logo, unable to enter fastboot, TWRP or hard reset because of the volume button not working.
I don't know what else to do, to be honest...
p.d.: I'm new here, sorry if this is not the right section to ask.
Are you 100% sure that you have chosen right version of GApps? because i never had any issues with GApps causing boot loop. BTW what lineage os version 16 or 17 ?
I never had any luck restoring stock rom backup via TWRP either i have no idea why whenever i restore it will stuck on androidone logo.
royalasif said:
Are you 100% sure that you have chosen right version of GApps? because i never had any issues with GApps causing boot loop. BTW what lineage os version 16 or 17 ?
I never had any luck restoring stock rom backup via TWRP either i have no idea why whenever i restore it will stuck on androidone logo.
Click to expand...
Click to collapse
I chose Android 10 GApps since I installed LineageOS 17. I thought it was the right version.
So TWRP can't be used for stock rom? I didn't know, maybe that's what got me stuck on Android One logo.
Any idea on how to get out from that loop? ?
Dont worry bootloop is not a problem download pixel experience it include gapps boot ur phone to twrp copy rom into internal or sd card Wipe system , data , cache and install the rom ..
TWRP should backup and restore stock image but i think there is something with this phone which wont let twrp to apply system restore i have done it 10 times and i failed everytime.
Edit: do let me know how it goes:good:
royalasif said:
Dont worry bootloop is not a problem download pixel experience it include gapps boot ur phone to twrp copy rom into internal or sd card Wipe system , data , cache and install the rom ..
TWRP should backup and restore stock image but i think there is something with this phone which wont let twrp to apply system restore i have done it 10 times and i failed everytime.
Edit: do let me know how it goes:good:
Click to expand...
Click to collapse
Definitely I'll try Pixel Experience! Seems like a good choice. I still need to figure out how to enter Fastboot or TWRP without the volume button.
try adb cmd if it works if not then u have to boot your device to EDL mode by test point method and then flash stock rom
ranjodhricky said:
try adb cmd if it works if not then u have to boot your device to EDL mode by test point method and then flash stock rom
Click to expand...
Click to collapse
Adb cmd won't recognize the device, so I'll have to boot it to EDL mode. Is there any guide here? I don't know how to do it.

Categories

Resources