Database Users

How can I activate Sprint Tab?

The volume up down thing didnt work for me.
Sent from my SPH-P100 using XDA App

Really no comments?
Sent from my SPH-P100 using XDA App

Sprint Activation
By activation I am assuming you mean gain network access to the Sprint data system? It should have prompted you for activation data at boot. Try through settings to connect to the mobile network and that should reinitiate the activation process. Not sure if this helps...

Sprint Activation
By activation I am assuming you mean gain network access to the Sprint mobile data system? It should have prompted you for activation information at boot. Try through settings to connect to the mobile network and that should reinitiate the activation process. Not sure if this helps...

Thanks for the reply. I meant I bought the Tab without a data plan and do not wish to. It keeps trying to activate but cant. I am looking for a way around it.
Sent from my SPH-P100 using XDA App

I've been grappling with this for a while now, and unfortunately, the activation process can only happen if you were to have service. You could, thanks to Sprint's 30 money back guarantee, buy a month of service, activate your device, and then cancel the service within a few days and you won't be charged. Of course, this invovles spending a whole lot of time on the phone with Sprint, or going into a Sprint store, which you may not want to do. Don't worry though, there is another option.
I decided I didn't want to go through any hassle, so I spent some time fooling around with the system and came up with the following method. It took me a while to in the application manager to track down the programs responsible for the activation prompt, but I found them. What you need to do is this:
NOTE: I have tested this on the SPRINT Tab with the latest software.
*DO NOT uninstall any of these apps, just "Freeze" them. If you delete any, you may loose the ability to do firmware and Android OS updates!*
1. Root your Tab, (preferably with z4root), I suggest using the "permanent root" option.
2. Go to Menu -> Settings -> Applications -> Development -> and check "USB Debugging"
3. Install Titanium Backup
4. Run Titanium Backup and go into "Backup/Restore" Look for "Software Update 1.5.0" in the list.
5. Tap the application name.
6. On the window that comes up, select "Freeze" It will give you a confirmation of success and the "Freeze" button will change to "Defrost" now hit the back button.
7. Locate "Sprint Installer 2.0", "Sprint Zone SZ 2.1.11", and "System Updates 1.0.0" Repeat steps 5 and 6 for each of these applications.
8. Close Titanium Backup
9. Restart
Now the activation prompt will not come up and it won't interrupt you when using your Tab. It doesn't affect anything if you plan to use the Tab off-contract with Wifi only.
I chose to "Freeze" the apps because it denies them access to the system, which removes the activation problem. I didn't uninstall them, though because if you want to activate it on the network at any time later, or you need to do a Firmware/Android OS update through official channels, you may need these apps.
If you want to undo this at any time, follow the directions the same way, but during step 6 select "Defrost" instead of "Freeze"
I hope this helps.

Thanks
Works great! Thanks for the info.

It´s posible active the phone
rkmj said:
I've been grappling with this for a while now, and unfortunately, the activation process can only happen if you were to have service. You could, thanks to Sprint's 30 money back guarantee, buy a month of service, activate your device, and then cancel the service within a few days and you won't be charged. Of course, this invovles spending a whole lot of time on the phone with Sprint, or going into a Sprint store, which you may not want to do. Don't worry though, there is another option.
I decided I didn't want to go through any hassle, so I spent some time fooling around with the system and came up with the following method. It took me a while to in the application manager to track down the programs responsible for the activation prompt, but I found them. What you need to do is this:
NOTE: I have tested this on the SPRINT Tab with the latest software.
*DO NOT uninstall any of these apps, just "Freeze" them. If you delete any, you may loose the ability to do firmware and Android OS updates!*
1. Root your Tab, (preferably with z4root), I suggest using the "permanent root" option.
2. Go to Menu -> Settings -> Applications -> Development -> and check "USB Debugging"
3. Install Titanium Backup
4. Run Titanium Backup and go into "Backup/Restore" Look for "Software Update 1.5.0" in the list.
5. Tap the application name.
6. On the window that comes up, select "Freeze" It will give you a confirmation of success and the "Freeze" button will change to "Defrost" now hit the back button.
7. Locate "Sprint Installer 2.0", "Sprint Zone SZ 2.1.11", and "System Updates 1.0.0" Repeat steps 5 and 6 for each of these applications.
8. Close Titanium Backup
9. Restart
Now the activation prompt will not come up and it won't interrupt you when using your Tab. It doesn't affect anything if you plan to use the Tab off-contract with Wifi only.
I chose to "Freeze" the apps because it denies them access to the system, which removes the activation problem. I didn't uninstall them, though because if you want to activate it on the network at any time later, or you need to do a Firmware/Android OS update through official channels, you may need these apps.
If you want to undo this at any time, follow the directions the same way, but during step 6 select "Defrost" instead of "Freeze"
I hope this helps.
Click to expand...
Click to collapse
Hi there, Do you think is´t posible to liberate the phone?

This is EXACTLY what I was looking for! Worked GREAT! Thanks!
... but I have a question regarding 2 of the items that are frozen now. like the Software Update 1.5.0 & System Updates 1.0.0 --- are they specific to sprint? what exactly are these for and why do these have to be frozen in order to disable the sprint activation? will i still be able to get firmware updates and all that jazz?
if i want to check for updates, do i need to defrost these?

How to get root app
maybe I'm missing something but how do you get the root app. I.e. to bypass activation you need a root application. However I can't find a way to download apps without the tab being activated. Seems like a paradox. In a nut shell how can I get the z4root application installed when the tab is not yet activated?
Thanks for any help

You can always turn on the WiFi, and connect it to an available network to gain access to the Market.
I too have been struggling with the activation prompt, and since Rooting is still somewhat touchy with our SPH-P100, I've found that the best answer is to put your Tab in Airplane mode, and manually turn on the WiFi. This will keep any options you're unsure of on the back burner 'til the devs here have some more time to save money for, and play with the Tab!

MSteinmetz said:
maybe I'm missing something but how do you get the root app. I.e. to bypass activation you need a root application. However I can't find a way to download apps without the tab being activated. Seems like a paradox. In a nut shell how can I get the z4root application installed when the tab is not yet activated?
Thanks for any help
Click to expand...
Click to collapse
You can find z4root here http://forum.xda-developers.com/showthread.php?t=833953
I have a Sprint tab, and if you hit cancel on the activation each time you turn the device on, you can still access your home screen and all the apps and enable wifi to access the market.
To permanently bypass activation, side load & install the z4root app from the link above and install Titanum Backup from the market .. follow the instructions posted by rkmj earlier in this thread.

kamgrn said:
This is EXACTLY what I was looking for! Worked GREAT! Thanks!
... but I have a question regarding 2 of the items that are frozen now. like the Software Update 1.5.0 & System Updates 1.0.0 --- are they specific to sprint? what exactly are these for and why do these have to be frozen in order to disable the sprint activation? will i still be able to get firmware updates and all that jazz?
if i want to check for updates, do i need to defrost these?
Click to expand...
Click to collapse
Sorry for taking so long to respond to this, but my XDA notification settings were all screwed up. I just realized that you asked this. Software Update 1.5.0 and System Updates seem to be Samsung apps that are tied directly to Sprint Zone and the activtion prompt. They run periodically and when they activate, they query Sprint Zone to see if the device has been activated on the network. In order to stop the activation prompt, these need to stop running.
I can't really tell about firmware updates just yet. Based on the way Sprint generally provides them, you will have the option of OTA or via PC. With this fix in place, you will need to run the update via the PC. If you wanted to get the firmware updates OTA, you will need to defrost the programs. Unfortunately, you will also have to activate the device.
My method doesn't change anything on the device. It just disables the prompt. In order to receive anything OTA, you will have to activate the device. I have a theory about how you can both disable the prompt and still query for OTA updates, but I have to do a bit of testing first. I will post back here once I have tested it completely.

Rooting My TMo Vibrant Using Super Oneclick (A Full Guide)

And every other step you need to transform and gain control of your stock ROM!
Given the fact that T-Mobile and Samsung have made it clear that the Galaxy S Vibrant will not receive Gingerbread, Honeycomb, ICS, or any other functionality update, I made the decision that it was finally time to root my beloved phone.
I didn't want to root for the purpose of trying a ROM for any of the above OS's. I merely figured that since there are not going to be any future updates to my phone, I'm basically on my own. And if I'm on my own then I can and should get rid of the TMo crap software that came pre-installed on my phone (and which can't be uninstalled by any normal means).
Hopefully this process might also help make my phone operate a little faster and cleaner. And in general, the rooting process would give me full control over my own phone. But if you have ever rooted a device the experience can sometimes be challenging, even for tech-savvy folks like me.
There are lots of sites for advice and how-to’s on rooting your Android device, but most of these sites run you through the process in a way that assumes all will work perfectly the first time. There aren't a lot that take you through the root process with at-hand solutions to many of the commonly reported errors.
I've just finished rooting my stock TMo Vibrant, fixing signature/Multi-CSC issues from the root process, installing and using Titanium Backup (TB) PRO to handle bloatware, and finally installing ROM Manager for the purpose of installing ClockworkMod Recovery (for creating and restoring backups of my current ROM). WHEW! And while it's all fresh in my mind, I'm writing it all down to share the process with you so that it's all in one convenient place.
Let’s Start With Rooting The Phone By Using Super Oneclick
After doing some reading in the XDA forums and a few other places, I wanted to try rooting with a one click option. There are many out there that are available for use. But the very first issue that plagued my rooting process was the incompatibility of many of these root installers with my home Win7 64bit pc.
I tried downloading and extracting various recommended solutions that use the "one click" functionality (Super Oneclick--various versions with and without drivers, Galaxy S One Click Root, and Vibrant One Click Root). I also downloaded and installed AIO Vibrant Toolbox, a program which also features a “one click” method for rooting a Vibrant once it has been installed on your pc.
What many posts on rooting never really mention with these methodologies is that you might have issues running the programs on a Win7 machine, which was my issue. Not all Win7 machines, but some. I downloaded the zip file for each with generally with no issue. * But once I tried to run the exe (best done via "Run As Administrator"), I got the following error message on virtually all of them:
"CLR Error: 80004005 The program will now terminate"
AIO Vibrant Toolbox wasn’t any better even though it was an installed program. It terminated as well.
(*NOTE: Anti-virus programs will mistake parts of the root zip files for Trojans, usually quarantining them after download. You are then left with the uncomfortable choice of turning off your anti-virus and taking that chance, or looking for another zip solution. I opted for the latter. Never take a chance with a Trojan!)
These errors messages did not show up on my work pc which is also Win7 64-bit. But that was no comfort as most of my root work was going to be done at home. After much searching on the internet, I read a random post that mentioned two helpful suggestions:
Use a rear or powered USB port, not a front port (because they often can’t power the root install sufficiently)
Use Super Oneclick v1.7 as opposed to any newer versions. The newer versions can cause problems with this particular Galaxy S root.
Two simple suggestions that made a world of difference! The root process worked smoothly afterward, and was finally a "success".
Reminder - Remember to put your phone into USB Debugging mode for the root process, and don’t mount the external SD card when attached.
Along the way to “rooting” you might be confronted with messages about your Samsung drivers for your phone. You may see messages like these:
Device drivers not found
Samsung android USB composite device failed
A quick search on these forums will yield updated drivers for your phone. The successful install of these drivers can also be a function of using the proper USB ports, as in the situation above. The installation of Samsung drivers failed on the front USB ports of my Dell. Success was again found using the rear ports. The main point here: use the rear ports (or powered USB ports) no matter how much of a pain it is maneuvering under your desk and behind your pc!
You’re Almost There…Kinda!
You can check to see if you are successfully rooted by checking to see if Superuser is installed in your apps. It was there… whew. The next step was to install Titanium Backup so that I could have root control over my apps, allowing me to delete bloatware that was slowing my phone. I downloaded TB from the Market, opened it, tried to give it Superuser permissions, and was notified with an error message that permissions were unsuccessful because the phone was not rooted. WHAT???
More online research revealed that I had achieved a “soft root”, whereby you have successfully rooted your phone but you don’t have all root permissions because the install wasn’t complete. The solution? Basically you just have to keep doing it more than once. All steps of this process seem like they will take the first time if you do what you are supposed to do. But more often than not, you have to repeat your steps over and over to make sure that it takes. After two more Super Oneclick rooting attempts, TB finally gave me the thumbs up for root.
Some may say it’s not necessary, but I upgraded to TB PRO. It allows for more options and better functionality with the apps and system data on the phone. And really, at about 6 dollars it is more than worth the price. Heck, two Starbucks lattes will run you more than 8 or 9 bucks. So if I can get piece of mind with respect to app management on my newly-rooted phone, 6 bucks is more than worth it.
I immediately wanted to learn how to remove bloatware -- and it’s amazingly difficult to find clear directions on doing so. After my backup of all apps and data, I went to the backup/restore tab and found the programs I wanted to get rid of. Many online users recommend “freezing” an app first to make sure that removing it won’t make your phone all wonky. So after “freezing” the offending apps (by pressing the menu button, selection batch, and then scrolling down to the appropriate section on freezing apps), I long-pressed the desired app and only saw one option for uninstalling via an exploit. I selected it and long story short, it failed. As the phone boots to stock recovery, this message popped up:
E:failed to verify whole-file signature
E:signature verification failed
Applying Multi-CSC Installing
Multi-CSC Installation Aborted​
In simple terms, the rooting tool (Super Oneclick) doesn’t contain all of the necessary items for a complete root. A fix is needed for the invalid signature problem that will help you get to a full root state. Fortunately there are fixes out there you can find for this particular fix.
Here are some helpful links:
http://androidforums.com/galaxy-s-a...iled-installation-aborted-one-click-root.html
http://forum.xda-developers.com/showthread.php?t=1052991
Read the instructions for the fix on the first page, but get the correct file from the second page as the link for the fix from Dropbox is a little messed up in the first URL. The second URL has the correct link. Use the automatic method so that you don’t have to use the terminal emulator. If you are like me, this process has already given you more gray hairs than you would really like to admit. So take the easy route.
Run the install.bat file and you will be fine. When you reach stock recovery again remember to reinstall all packages. This will make sure that the fix is installed properly. I didn’t know that was needed and was wondering why the fix wasn’t taking initially. So I’m sharing this with you to head off your frustrations at the pass. ;-)
Getting Rid Of The Bloat
Check to make sure that you are fully rooted by opening TB. It will automatically take Superuser permissions from the first time you allowed it IF you are rooted. If not, it will tell you. And by now you should be rooted. Heading back to the bloatware, I was able to figure out that the “long press method” was not the correct one for uninstalling apps.
Once again, press the menu button (bottom left) and select batch. Scroll down and you will see a section for uninstalling apps. Select uninstall user and system apps, and make sure to DESELECT ALL before you do anything else. From there you can pick and choose the apps to uninstall, then “run the batch operation” to complete the task. Bye bye bloatware!
The last crucial step to complete now that your phone is rooted is to make sure that you have a backup of your current ROM and configuration. The backup you created using TB is only for apps and data. It is not a backup of your current stock ROM.
Nandroid backup works best for the purpose of backing up and restoring ROMs. And if you have done any previous rooting on an Android device, you will recognize that Nandroid is a function of ClockworkMod Recovery. Sigh. I know... frustration starts to set in as you realize that there is yet another necessary install needed for a totally successful root process ON TOP OF and AFTER everything else you have had to do. So what is the next step?
ROM Manager To The Rescue
Install the free ROM Manager from the Market and you will be good to go. This app allows you to flash CWM Recovery as well as mount various ROMs on your phone. After installing the app (and declining the various offers that pop up), press “Flash ClockworkMod Recovery” at the top of the menu. It will cause the phone to reboot. And CWM will be downloaded…but not installed. To install after reboot, open ROM Manager and now select Reboot into Recovery. It will challenge you with a question on whether you really want to do this or not. Say Yes.
Important: This is another one of those places where it’s not intuitively obvious what to do for CWM Recovery.
When I first rebooted into recovery I didn’t see any changes from my stock recovery menu…because there were none. What I needed to do (which I found in yet another forum posting) was again to select Reinstall all packages. CWM had been downloaded and was ready to install… this would do so.
Happily, the phone went into Clockwork recovery*immediately after "Reinstall all packages" . If it wasn't clear earlier, use the volume buttons toggle up (or down) to select backup/restore. *You can then implement your selection by pressing the power button on the right side of the phone. On the next screen select backup, and then let it do its’ thing. It may take a while to complete, but will be well worth the time and effort if you have any future problems.
The Entire Process Is Finally Complete
So there you have it. In a nutshell, here were my steps:
1. Samsung drivers
2. Super Oneclick v 1.7
3. E. Signature fix
4. Titanium Backup PRO
5. ROM Manager (free version)​
Use the rear USB ports or powered USB ports for the phone connection. Phone should be in USB debugging mode, and external SD card should not be mounted. For each process, it may take up to 2 or 3 attempts for successful completion. So keep trying after the first FAIL message. When applicable, “Reinstall All Packages” to make sure that downloaded files are actually installed.
And lastly, if absolutely nothing works correctly for you, PLEASE PLEASE PLEASE use Google for help. Many others have successfully worked through all of the problems you might encounter that aren’t listed here. Actively use Google to help find solutions to any problems, using the exact error messages shown and adding in your phone type. You will be amazed by the depth of experience out there that can help you.
Above all else, keep up a good attitude. Rooting might be a pain in the ass while you are doing it, but it’s for a greater purpose. My four days of rooting have now given me a phone that is FREE from all the bloatware that bugged me for the past two years. And soon I’m sure I will experiment with a different ROM. But for now I’m just happy that I have my phone, my way. After all, if they (TMo and Samsung) aren’t going to make our phones better, we can do so for ourselves.
Good luck, and I hope this complete set of instructions from my own past 4 days of experience will help someone else!

A good read. A few things though with the Titanium part.
First I whole-heartedly agree to kick down the $ for the Pro. It really ups the functionality of the app and what all it can do.
The part about "freezing". This part is tricky b/c you need to make sure he apps that you are freezing are indeed bloat and not something that is needed for something else (i.e. did you know that GTalk directly effects the market on some ROMS). I don't use Gtalk but I still have it installed and frozen so I can defrost at will. This is the reason for Freeze. It lets you know of any adverse effects on your ROM, other apps,...then you have the option to defrost if need be. I also always avoid doing anything in "Batches" on TBPro, as it can sometimes be a little wonky, especially when restoring batches, causes reboot and freezes resulting in batterty pull.
I freeze for at least a week on new ROMs so that I get the full experience with daily life to make my determination on uninstall, defrost or wait longer.
Another way to do it is once you know the apps that are frozen do not effect any other parts of your ROM, you can back them up with TBpro for later use and uninstall or you can do it this way. Since you have root, go into /system/app or and pull the APK out and put it in a folder or something like that on your SD card. You would do this to some of the /system apps that TB shows as only haveing a checkmark next to and not the yellow/orange circle with the M in it. If you uninstall these with the checkmark you will not be able to restore them b/c part of the executable portion of the APK is not able to be backed up. This is the reason to pull the app out of /system/app and put it on your SD card. Hit menu, more, Clean up Dalvik cache and viola!! you have some free space on /system and the offending APK's dex will be deleted too.
Sidenote: I have never been able to get SuperOneClick to work on any phone I have ever tried. Maybe I'll unroot and try again but the SU exploit is a flashable zip located here. Option A. Put it on your SD card, boot into recovery and Bam!!! you are rooted
Nice work though.

Where can we still get Super Oneclick v 1.7?

http://forum.xda-developers.com/showthread.php?t=739300 make sure you have ADB turned on and use the USB ports from the back not front

too lengthy.

Just got vibrant
Sent from my SGH-T769 using xda app-developers app

Sent from my SAMSUNG-SGH-I317 using Tapatalk
Delete..

[Q] whatsapp not working on my focus sgh-i917

I am not getting an option of installing whatsapp on my Samsung focus from marketplace..
please help me out with this one..

vivek2510 said:
I am not getting an option of installing whatsapp on my Samsung focus from marketplace..
please help me out with this one..
Click to expand...
Click to collapse
The list of apps you can install from Marketplace is tied to the country of your Live account registered in the phone. If the live account is not US or UK, you will have a limited number of apps available... So, you need to change the country of your Live account.
The alternative is to hard reset the phone and use another Live account from US or UK...
In what country is your account registered?

You can install easily install whatsapp and other apps on sumsung focus
vivek2510 said:
I am not getting an option of installing whatsapp on my Samsung focus from marketplace..
please help me out with this one..
Click to expand...
Click to collapse
There is certainly a way to install whatsapp, Tango, viber and several other apps on the sumsung sgh-i917 just like you can for any other windows phone. follow the steps below
STEP 1. download and install "zune". make sure you are connected to the internet at the time when you download and install "zune"
STEP 2. update the "zune" software when requested to do so.
STEP 3. create a microsoft live account
STEP 4. connect your phone to the PC. in most cases it will automatically detect the drivers for your phone
STEP 5. sign in your microsoft live account on "zune"
STEP 6. update update update. select the phone, go to settings and click update. this step requires internet to be able to download and update your phone.
STEP 7. follow the prompt and do all the needed updates. once the update is done, you will be able to download all the apps you want for
your phone. the update might range between 1 - 2hours.
NOTE: the main solution is updating your phone. if the update is done your phone should work fine. if you also know of any other ways for updating your phone, feel free to do so.

Samsung app updates

I think S Voice just updated to 11.4.0.2 but can find anywhere I can see for sure it did. I also cant find anywhere that has S Voice changelog. Anyone know if an update did come out and what was updated?
Also, I disabled a few installed apps like S Health but the samsung apps keeps updating and enabling. Does this mean its no use just disabling the apps?

S Voice is on 11.4.0.2 but it hasn't received an update for a little while now. That is the latest version though.
As for freezing/disabling apps, yes, when an update appears, you get a prompt to download. You have two choices:
1/ Download, install then disable again (until another update comes along and repeat the process)
2/ Uninstall the app via root and don't worry about it again.

How can I stop Verizon forced update? Phone is not rooted.

Most of the Verizon updates have been buggy and this one seems to follow that model. And my phone is currently working passably well -- except for the new popups that want me to update.
I turned off automatic updates under developer options, but that has had no effect. The update was downloaded without my consent. I want to stop the nagging and delete or rename the update file.
I have two different file manager programs but neither of them seem to be able to see the system folder, even though I have enabled the "show hidden files" option. I thought I could perhaps suss out the name of the update package by sorting by date but I can't even find the folder for it. I've tried X-Plore File Manager and Solid Explorer Classic but neither seems to show me the system folder. I am not very familiar with Android but have worked with Linux and Windows systems in the past.
I find it infuriating that Verizon can force software onto a phone that I own. I have a pre-pay plan so it was purchased with a one-time payment and not bought from Verizon. I'm tired of their buggy updates.

Here is what I did,,,which you should be able to do as long as you can root.
1. Root your phone using the easy root/unroot option in the dev section
2. Go to the play store and buy Package Disabler Pro,,,well worth the 1.50
3. Once you give Package Disabler Pro root permission find the two software update apps in the list and disable them.
4. Go back to the easy root/unroot thread and follow the easy directions to unroot. This will also wipe your devices cache,,,which is where your downloaded update is probably residing now hence the update notifications. It wont wipe your device just the cache as part of the unroot process.
5. Once your unrooted, and back to stock, you can check like I did and see that the two software update apps are still disabled and no more update notifications.
The only thing different would be the app names for Verizon updates as I am running U firmware on my Verizon S7 Edge so there is not a lot of bloatware that I had to disable from the start. Here is a screenshot on my apps unrooted. They are still disabled thank God lol.