I've been using the Sharp Aquos Crystal for a few days now and loving it mostly, however occasionally when I have a particular grip on the phone the touch screen stops working and I get a popup that says something like "The touch panel has been locked due to a lack of response .... Move your hand or thing away from ..." The popup disappears very quickly so I haven't been able to get the full text written down or a picture snapped, but I was wondering if anyone else had noticed this and had figured out what it meant.
when u turn on the brightkeep function,the message will pop up while u try to opreating your phone when it on a flat surface. either turn the function off or hold your phone by your hand when opreating will fix it. I am new here. and i got a softbank 305sh. hope this will be helpful.
I think it is caused by the tiny censor at the right bottom side .
Maybe you turn on "Sweep ON" function? if you turn it off, it won't show up but since this device got a power button on some place, hard to push, so I can't turn it off..
the best way, operate your phone with the left hand
When this happens to me, I point the little sensor up or at a light source for a second and that seems to work every time.
The message:" Touch Panel is locked due to the response of sensor on lower right of screen. Move your hand or thing away". This happens a lot and no matter what I turn on or off doesn't stop it. I send an email to Sharp and their response was that my phone needs to be serviced. I called Boost Mobile and the guy was giving me a hard time so I can either ship it away and hope they don't damage my phone too much or live with it but it happens more times than not and usually when I'm sending a text or email.
Happens a lot on mine as well especially if I wear long sleeve or using it on a blanket.that message just show up whenever the lower right of the phone touch the cloth. hand is not at much as a problem.
Sent from my 306SH
Help Me Please! for unlock sharp aquos 306
Related
Hi, I was wondering if anyone suffers from screen corruption when recieving an incoming call. My screen sometimes (maybe 6 times out of 10) will go into landscape mode and result in some corruption. It will revert to normal when I actually answer the call. Sometimes, I am unable to answer the call and the caller will be sent to voicemail even though I click the green send button.
Has anyone come accross anything like this?
Thanks.
Well, there is a chance that I am psychic... Are you storing your device in the supplied holster? It has been noted that the sensor which indicates the keyboard is fully out appears to be either magnetic or sensitive to magnetic fields. So it is entirely possible that it is getting temporarily switched to landscape as you drag it out of the holster.
Neat experiment to prove this sensitivity. Take your K-Jam, turn on the power. Now, with the keyboard stowed, take your holster flap place the fuzzy side against the back of your device and slowly move it up around the right-hand edge of your device. At some point along the way your device will flip to landscape.
Robert Harrold
Houston, TX
Ahh, its done magnetically? I was worried a microswitch would eventually wear out ;p
you are so true, it happens to me all the time, it even answers calls automaticaly, I thought I was pressing some buttons while taking it out of the holster but I tried your little experiment , it was positive all the time,
Now, how to solve this without throwing the holster away?
I notices that it happens more when the screen is facing inside, when I insert it screen outside it rarely happens!
you are so true, it happens to me all the time, it even answers calls automaticaly, I thought I was pressing some buttons while taking it out of the holster but I tried your little experiment , it was positive all the time,
Now, how to solve this without throwing the holster away?
I notices that it happens more when the screen is facing inside, when I insert it screen outside it rarely happens!
robinton said:
Well, there is a chance that I am psychic... Are you storing your device in the supplied holster? It has been noted that the sensor which indicates the keyboard is fully out appears to be either magnetic or sensitive to magnetic fields. So it is entirely possible that it is getting temporarily switched to landscape as you drag it out of the holster.
Neat experiment to prove this sensitivity. Take your K-Jam, turn on the power. Now, with the keyboard stowed, take your holster flap place the fuzzy side against the back of your device and slowly move it up around the right-hand edge of your device. At some point along the way your device will flip to landscape.
Robert Harrold
Houston, TX
Click to expand...
Click to collapse
Robert, I will pay to have you read my fortune any day!! Exactly as you said. Really gutted about having to ditch the holster, but I would rather be able to answer my calls effectively.
Thanks again, pal. Much appreciated.
simx said:
you are so true, it happens to me all the time, it even answers calls automaticaly, I thought I was pressing some buttons while taking it out of the holster but I tried your little experiment , it was positive all the time,
Now, how to solve this without throwing the holster away?
I notices that it happens more when the screen is facing inside, when I insert it screen outside it rarely happens!
Click to expand...
Click to collapse
U JUST SOLVED MY PROBLEM
I JUST THOUGHT THERE WAS SOMETHING WRONG WITH MY HANDS !!
or what i have is the top button on the right handside to flip between land and port, so when it does that you just press the button and it flips back right away!
I dropped my phone and the screen now doesnt respond properly: The hardware DID successfully upgrade to the XDA ROM. But touching it causes the backlight to go on, - but most of the keys dont do what one would expect them to do: The phone turns on with a reminder from the calendar on the screen which wont DISMISS or CLOSE. Pressing on the windows logo and then on the phone key causes the calendar to come up and I am not sure which numbers are entered when I do manage to get the phone to come onto the screen (none of the right hand numbers seem to work at all). Does anyone recognise these symptoms and/or could they just show that my SX-56 needs the ROM RE-flashing? I should add that pressing the Master Reset button with this ROM in place seems to make the phone shut off and then when you restart it, all of the data remains in place. I wonder if there is any possibility that the XDA ROM has prevented the reset button from working normally?
A user on another forum said that to him, '"Sounds like the digitiser is up the swanee - have you tried recalibrating it?"
10-12 vertical black lines started appearing to the right hand edge of the screen. Sometimes they are there, sometimes not. THere is usually at last one there somewhere. At about that time the screen stopped responding as I mention. Today the left third started displaying the same veritcal lines, though spaced quite far apart (about a millimetre). Screen doesn't APPEAR cracked: Does this sound like a digitiser and if so, how do you recalibrate it please or is there a link to somewhere on the XDA site which I cant find which might tell me? Or could it be the cable is loose in the circuit board? As you touch the lower right hand corner of the metal casing where the vertical lines are, those lines flash (the right 10 or 12) on and off. And every coloured bar everywhere on the screen or word of text has vertical lines on it (the white parts don't)??
Someone on ebay has said that his phone "fell from my pocket and onto the carpet and the screen cracked, I then used it for about a week" "I sold the screen to someone cause the wanted the touch pad part of the screen for there phone". and wonder what it was he sold or which part can be replaced on it? IS there a touch part and a screen part on this phone?
To be honest, itsounds like you have brocken a connection somewhere between the LCD and the gfx output, probably not possible to repair yourself.
I wonder where the break would be?
I thought that might be the case: I wonder if it would be worthwhile trying to get another screen?
I should probably try to take the unit apart and see if some break somewhere can be identified if it is a break as opposed to some electonic part having failed. It SEEMS to be in the lower right hand corner?
So my sister who also has an Aria dropper her phone and now there is a huge crack on the screen. She doesn't have insurance so she is trying to find an alternative way to fix it.
Simply replacing the screen would work, but another problem started happening when she cracked the screen. During a phone call, the screen will turn off, as it should, but when the call has ended, the screen stays off and the only way to turn it back on is to either pull out the battery and reboot the phone or to plug it into a charger.
Does anyone know how to solve this problem? Will replacing the screen fix the blackout issue? Or is this phone just trashed forever?
sounds like it destroyed the phone and the proximity sensor. i'm not sure if replacing the screen will fix this.
I actually had the exact same problem after dropping my phone during a call. I noticed that I didn't have to pull the battery to end the call if I held it up super-close to a really bright light (desk lamp, etc).
There were many times when I was on the street (in nyc), and had to find a bright light to hold it up to.
I dropped my Aria right on the corner with the ambient light sensor (in the upper right corner), which shattered the glass right in front of it.
Amazingly enough, after a few weeks, it started to get better and better - and now, nearly 4 months later (yea, i just deal with **** lol), it will hang up cals properly.
I'm actually working on replacing the screen right now, btw
Hey friends,
I am facing this problem while making calls that as soon as I press call button or receive button(while taking call) the screen turns off n stay that way till the call ends.
I have tried pressing all hardware buttons,even moved the dvp awayfrom me n into direct light but to no avial.though it did turn on once or twice out of twenty times.
Did anyone else experience this? Any suggestions are welcome..
Sent from my HD7 T9292 using Board Express
Do you have a screen protector or case that is obscuring the light sensor or proximity sensor? My first guess is that something is obscuring one or both, because during a call the screen being off is a feature.
Arcarsenal said:
Do you have a screen protector or case that is obscuring the light sensor or proximity sensor? My first guess is that something is obscuring one or both, because during a call the screen being off is a feature.
Click to expand...
Click to collapse
i know about this feature n still have that plastic skin on the screen i'll remove it n check again don't think it d block light but then wats the harm?
screen stays black/off during call
The screen stays black during a call and this happens ramdomly. I have a dell venue pro a t mobile phone but it is a pre release so it works on att 3g and all. I have switched the sd card with no improvement. I have ordered a transender 32 gb sd that I haven't received yet. The firmware version 2250.1400.7004.025 hardware is 112.576.2.0 radio soft 2.2.50.14 radio hard 8250. I have been unable to get any of the hardware keys to hang up the phone which if I get voicemail or something means I have to power the phone down to get the dang thing to hang up. Sometimes it works fine but I cant find a commonality software or hardware that causes this. It happens right out of the box so even after a software reset it can happen. Is there any solution for this issue?
I can't understand why the button on top doesn't hang it up.
PS I got this phone for free and I got ripped off LOL
wow just got a replacement phone today and im having this problem, As soon as I go to make a call the screen goes black and cant do anything on screen during the call, so i cant enter my password when checking voicemail
I think it's related to the proximity sensor. When you put the phone close to your head, the screen switches off. When you move it away, it will switch on - most of the time .
If it stays black, have you tried tapping the power button on the top of the phone? It switches the screen on without disconnecting your call.
A coworker got a replacement the other day(they send a refurb) phone and it had the same problem. Had to go through Twitter to get Dell to send him a new retail phone since they had send him 3 refurbs prior and they all had different issues.
This is just a general statement regarding phone proximity sensors. I have had multiple phones made by different manufactures that experience this to some degree (including the Venue Pro). One thing that I have noticed is that if the phone goes from your face directly into a bright light (outside is most common) it will keep the screen shut off but if the sensor is somewhat shaded it will resume normal function.
I got the same problem too and while it may be a proximity sensor problem, it is not controllable on the user's end. Unless the phone call disconnects magically, a battery pull is necessary.
I'm gonna be on my third one soon and I hope that i won't face the same problem.
magicsquid said:
I think it's related to the proximity sensor. When you put the phone close to your head, the screen switches off. When you move it away, it will switch on - most of the time .
If it stays black, have you tried tapping the power button on the top of the phone? It switches the screen on without disconnecting your call.
Click to expand...
Click to collapse
Yes i recently got a new refurbed phone and this problem has arised. Complained to Dell and they are going to send me a Brand new DVP. I see a lot of people having this same issue with the refurbs. Currently Dell is out of new DVP due to them upgraing the firmware, so I have to deal with a broke phone till the end of August. Talk about a dissatisfied customer. Im thinking about selling this brand new unit when I get it, hopefully Toshiba has their device out by then
This is a Proximity Sensor issue. You can fix it though in the EM app. You can adjust the sensor readings and the phone will function like normal. Let me know if you need the values or a step by step!
theusername said:
This is a Proximity Sensor issue. You can fix it though in the EM app. You can adjust the sensor readings and the phone will function like normal. Let me know if you need the values or a step by step!
Click to expand...
Click to collapse
please explain because im getting frustrated
theusername said:
This is a Proximity Sensor issue. You can fix it though in the EM app. You can adjust the sensor readings and the phone will function like normal. Let me know if you need the values or a step by step!
Click to expand...
Click to collapse
A step by step would be awesome. I like being able to see the screen during a call.
1) Get the EM app, if you dont have it dial ##634# into the dialer
2) Get into the advanced menu by double tapping the black area and typing in "qwertyuiop"
3) Select "RD test", now enter *#6336# in the box that pops up.
4) Select "Sensors", and the "Proximity Sensor Config"
5) Set the following to these:
LED strength - 1
Diode select - 2
Pulse Count - 43
6) Hit set and then you are good to go!
I have noticed that one of my DVP's needs to have this put in again everytime I reboot the phone, the other saves it. Just an FYI for ya!
I get to step 3 and when i clock on RD test, I am prompted with a white box with blue trim and an X at the top right. can you advise on how to proceed?
Oh yeah, Im sorry I forgot that part. Enter *#6336# as the password.
When I dial *#634# it says thic code is not supported.
What does that mean?
I put in a different number combo before and it put me in the EM screen
937dytboi said:
When I dial *#634# it says thic code is not supported.
What does that mean?
I put in a different number combo before and it put me in the EM screen
Click to expand...
Click to collapse
Try ##634#, Im made a typo there and put a * the first time.
did the steps and it didnt work for me am i doing something wrong
937dytboi said:
did the steps and it didnt work for me am i doing something wrong
Click to expand...
Click to collapse
I dont know, you could just have a defective phone. I know thats hard to believe that from Dell.....
First phone had the camera problem, so I had it replaced, but both phones open apps that are not on the screen whenever I pick up the phone or put it down. I hold the phone on its sides, I do not accidentally touch the screen, I do not touch the buttons on either side, and even if I did, the app that opens will always be an app that is not on the screen I have touched. This is obviously some weird Note 4 problem, since both phones have done it and both phones did not even have the same apps installed, it seems to involve the way I hold the phone; holding it in my hand by the sides and walking around with it will sometimes open an app also, but mostly when I either pick it up or put it down, again fingers not touching anything but the sides of the phone, and not the buttons on the sides of the phone either, the only way I can avoid this is to black the screen with the right side button before I put the phone down or in my bag, as otherwise it will open a random app. I think I have gone on long enough to describe this situation, so does anyone have any ideas??
jlgg said:
First phone had the camera problem, so I had it replaced, but both phones open apps that are not on the screen whenever I pick up the phone or put it down. I hold the phone on its sides, I do not accidentally touch the screen, I do not touch the buttons on either side, and even if I did, the app that opens will always be an app that is not on the screen I have touched. This is obviously some weird Note 4 problem, since both phones have done it and both phones did not even have the same apps installed, it seems to involve the way I hold the phone; holding it in my hand by the sides and walking around with it will sometimes open an app also, but mostly when I either pick it up or put it down, again fingers not touching anything but the sides of the phone, and not the buttons on the sides of the phone either, the only way I can avoid this is to black the screen with the right side button before I put the phone down or in my bag, as otherwise it will open a random app. I think I have gone on long enough to describe this situation, so does anyone have any ideas??
Click to expand...
Click to collapse
I have note 4 long time and i didnt have any off this problems all working great . My phone is n910c exynos
Sent from my SM-N910C using XDA-Developers Legacy app
thanks for the info.
Have you check the Notification Panel to see if you have Touch Sensitivity enabled?
thanks for the reply, no, I didn't enable that on either phone.
Just wanted to share: I've had the same happen to me. On one occasion, my phone uploaded and sent pictures to one of my contact as I was was watching. I immediately suspected something nefarious. When I came across this post, I had to share.
I'd recommend that you remove the screen protector from your device if you use one, and see if that helps.
haha bruce lee roy, and to iceepyon, yes I had a glass screen protector on the first phone, but nothing on this one as I want it to break accidentally so I have to buy something new, but again both phones have the same behaviour with and without any screen protector. Really, nobody has had this problem at all with a Note 4 besides me?