Please help the frustrated me
I put a T-mobile sim card on my VZW Note 3 and added an APN to for the mobile network, the 4G LTE flag shows up in the status bar as expected. The only problem is: when it uses data network instead of WIFI, all non-http network connections seem to get blocked and the only thing I can do is to use the browser to surf Internet. All other apps such as WeChat, Skype don't work at all. WeChat keeps reporting "Server access failure (1, -10087)".
I suspect there's a firewall built in the T-mobile data network but couldn't find any settings about it.
Does any expert here know to solve the problem?
Thanks!
eastdeal said:
Please help the frustrated me
I put a T-mobile sim card on my VZW Note 3 and added an APN to for the mobile network, the 4G LTE flag shows up in the status bar as expected. The only problem is: when it uses data network instead of WIFI, all non-http network connections seem to get blocked and the only thing I can do is to use the browser to surf Internet. All other apps such as WeChat, Skype don't work at all. WeChat keeps reporting "Server access failure (1, -10087)".
I suspect there's a firewall built in the T-mobile data network but couldn't find any settings about it.
Does any expert here know to solve the problem?
Thanks!
Click to expand...
Click to collapse
Did you ever get it to work? I'm experiencing the same issue with my note 3 from VZW.
Server Access Error (-1,10087) with WeChat \ HTC One M8 \ T-Mobile
I have been getting the same error ever since Android was updated from 4.3 to 4.4.*.
I have WeChat on a HTC One M8 on T-Mobile. Works fine on WiFi, but not on direct connect to T-Mobile's LTE network. T-Mobile doesn't have any ideas what could be causing this except to say it is either WeChat, Android, or HTC.
T-Mobile did give me a brand new HTC One M8 thinking a new phone may help, but I still run into the same issues.
I have full use of Internet, email and messaging, but WeChat will not connect via the T-Mobile network. It appears WeChat may be getting blocked by T-Mobile when accessing via the HTC One M8 as there are a few things occurring:
1. Continually receiving an error: Server Access Error (-1,10087). Only occurs when there is no WiF and trying to connect through T-Mobile’s data network.
2. Cannot request a TEXT to be sent to me under the Password Recovery feature. It says a text is being sent but none come through.
3. The same with the request a phone call Password Recover feature. It says to expect a call but none come.
4. When sending a data report, it will get to 95% uploaded and then freeze and never finishes.
Any thoughts on how to correct this?
eastdeal said:
Please help the frustrated me
I put a T-mobile sim card on my VZW Note 3 and added an APN to for the mobile network, the 4G LTE flag shows up in the status bar as expected. The only problem is: when it uses data network instead of WIFI, all non-http network connections seem to get blocked and the only thing I can do is to use the browser to surf Internet. All other apps such as WeChat, Skype don't work at all. WeChat keeps reporting "Server access failure (1, -10087)".
I suspect there's a firewall built in the T-mobile data network but couldn't find any settings about it.
Does any expert here know to solve the problem?
Thanks!
Click to expand...
Click to collapse
Did you check to see if you have a proxy in your apn settings? That would cause a such a condition if you have a proxy in your tmobile apn settings.
Sent from my SM-N900V using XDA Premium 4 mobile app
Same thing for me on Tmobile M8 using We Chat. If I go into the settings and turn off and on Mobile Data, it will work for a few minutes and then revert back to the server error.
I definitely believe it has to deal with something on Tmobile's network but their support doesn't have an answer. Someone please help!
finally figured it out
This has been bothering me since I flashed the viperone rom for my M8. The solution is simple, go to your APN setting edit access point, change APN protocol from IPV6 into IPV4/IPV6!
luvtommie said:
Same thing for me on Tmobile M8 using We Chat. If I go into the settings and turn off and on Mobile Data, it will work for a few minutes and then revert back to the server error.
I definitely believe it has to deal with something on Tmobile's network but their support doesn't have an answer. Someone please help!
Click to expand...
Click to collapse
I recently upgraded from Marshmallow to N (7.0.0), and cannot see the WiFi Calling settings at all in Settings>More under Wireless & Networks. I see Airplane mode, NFC, Android Beam, Tethering & portable hotspot, VPN, and Cellular networks, in that order. I am on a rooted stock rom. Has anyone else experienced this? For the record, I was not able to see this feature on Marshmallow either, and upgraded to see if it would become available for me on N.
it's in the phone>settings>calls
Thank you so much - this is now working for me on 7.0.0
Does this setting auto hide if the carrier doesn't support it? I'm on GoPhone and I don't see that.
Is there an ADB command to get this enabled on the 6P? The carrier has told me they are only covering some but not all handsets and have said that the WiFi calling feature has been turned on in my account but its not showing up on the phone under calls? Is there a command line to make this appear?
I am having the same problem. It is hidden in my handset, whereas before nougat it was there, even though technically my device isn't supported. Can adb help? Thanks.
Hey guys, I just saw a YouTube video that was posted yesterday where the guy shows that after the update he no longer could connect with his Verizon SIM card in the axon 7. Has anybody else run into this? Mine won't be here until Monday but if this is true I'm going to be sorely disappointed. Thanks for your input.
I am on verizon with no additional problems after the update. I am still always roaming, and my signal is the same (more bars but still the same reception). LTE, MMS, SMS, Cdma all work the same.
I'm really glad to hear that. I'm not so sure the guy knew what he was doing either... Lol :silly:
CaptainElwood said:
I am on verizon with no additional problems after the update. I am still always roaming, and my signal is the same (more bars but still the same reception). LTE, MMS, SMS, Cdma all work the same.
Click to expand...
Click to collapse
Quick question for you bud. I currently have the Moto Z-Force, but I want an unlocked phone that I can root and mess around with and unfortunately this phone doesn't have that capability. Would you say this is a great alternative in terms of functionality and specs? Tia
CaptainElwood said:
I am on verizon with no additional problems after the update. I am still always roaming, and my signal is the same (more bars but still the same reception). LTE, MMS, SMS, Cdma all work the same.
Click to expand...
Click to collapse
I second this. No issues on Verizon unlimited plan after update. Always showing roaming also. Mms, sms, calls work as suppose to. All out of the box settings.
Sent from my ZTE A2017U using XDA-Developers mobile app
tolymatev said:
I second this. No issues on Verizon unlimited plan after update. Always showing roaming also. Mms, sms, calls work as suppose to. All out of the box settings.
Sent from my ZTE A2017U using XDA-Developers mobile app
Click to expand...
Click to collapse
I can third it lol no issues here. Mine actually has better signal after update on verizon and sms/mms everything works still no issues anywhere
My VZW situation. Just an FYI post AND how to fix it.
I'm on Verizon, have had my Axon 7 for over a month now. No issues other than not having VoLTE, and the occasional software farts (Using Nova Launcher now). When I initially set-up my phone, I imported all previous apps directly from the Play Store. I should have known not to install the VZW apps that were previously installed on my HTC One M8 (purchased directly from VZW), but in my excitement for the new phone, it skipped my mind. Anyhow, no issues through 9/19. "Verizon" displayed as my carrier, and full access to the LTE network.
Fast forward to 9/20 (post B27 update) when one of the VZW updated automatically (I don't recall which of the 2 apps I had installed), and BAMM, "123456" displayed as my carrier and no more access to the LTE network (3G only). Later that evening, my VZW account showed my number with an "unauthorized, non-VZW device", whereas, before the VZW app update it showed my HTC one M8. I removed the SIM and shut down the phone, re-installed the SIM and re-booted....nada. Tried what seemed to be every permutation of replacing the SIM card, played around with APN settings...no dice.
My feeling is they booted me off 4G LTE once the app recognized I was using an unauthorized, non-VZW device. The steps below solved the issue (Provided by "vzwcdma" via the ZTE Community Forum).
"As for losing LTE connectivity, I've had a similar problem before, both on the A7 and other devices. On other devices, like Motorola devices, I could just boot into the bootloader and clear the modem state partitions via fastboot, but ZTE seems to have disabled that function in the A7's bootloader. So, for the A7, I had to mess around a bit with the modem mode. Download "Network" or "4G LTE Switch" from the Play Store. Open it and scroll down to "Set preferred network type", where it should say "LTE/GSM/CDMA auto (PRL)". There isn't really a set guide for what you have to do, but try switching into LTE-only mode, try hitting "Turn off radio" and "Turn on radio" (not Airplane Mode), maybe try "LTE/CDMA audo (PRL)", maybe turn off radio, switch to LTE-only mode, turn on radio, etc. At some point (I'm not sure what) the phone will reset its modem state, and should re-connect to Verizon LTE (and when it does, switch the network type back to LTE/GSM/CDMA auto PRL.
My Verizon account also shows "unauthorized, non-VZW device". Shouldn't affect anything. I've been using an unauthorized/non-VZW device prior to the A7 with no issues as well."
roseykr said:
My VZW situation. Just an FYI post AND how to fix it.
I'm on Verizon, have had my Axon 7 for over a month now. No issues other than not having VoLTE, and the occasional software farts (Using Nova Launcher now). When I initially set-up my phone, I imported all previous apps directly from the Play Store. I should have known not to install the VZW apps that were previously installed on my HTC One M8 (purchased directly from VZW), but in my excitement for the new phone, it skipped my mind. Anyhow, no issues through 9/19. "Verizon" displayed as my carrier, and full access to the LTE network.
Fast forward to 9/20 (post B27 update) when one of the VZW updated automatically (I don't recall which of the 2 apps I had installed), and BAMM, "123456" displayed as my carrier and no more access to the LTE network (3G only). Later that evening, my VZW account showed my number with an "unauthorized, non-VZW device", whereas, before the VZW app update it showed my HTC one M8. I removed the SIM and shut down the phone, re-installed the SIM and re-booted....nada. Tried what seemed to be every permutation of replacing the SIM card, played around with APN settings...no dice.
My feeling is they booted me off 4G LTE once the app recognized I was using an unauthorized, non-VZW device. The steps below solved the issue (Provided by "vzwcdma" via the ZTE Community Forum).
"As for losing LTE connectivity, I've had a similar problem before, both on the A7 and other devices. On other devices, like Motorola devices, I could just boot into the bootloader and clear the modem state partitions via fastboot, but ZTE seems to have disabled that function in the A7's bootloader. So, for the A7, I had to mess around a bit with the modem mode. Download "Network" or "4G LTE Switch" from the Play Store. Open it and scroll down to "Set preferred network type", where it should say "LTE/GSM/CDMA auto (PRL)". There isn't really a set guide for what you have to do, but try switching into LTE-only mode, try hitting "Turn off radio" and "Turn on radio" (not Airplane Mode), maybe try "LTE/CDMA audo (PRL)", maybe turn off radio, switch to LTE-only mode, turn on radio, etc. At some point (I'm not sure what) the phone will reset its modem state, and should re-connect to Verizon LTE (and when it does, switch the network type back to LTE/GSM/CDMA auto PRL.
My Verizon account also shows "unauthorized, non-VZW device". Shouldn't affect anything. I've been using an unauthorized/non-VZW device prior to the A7 with no issues as well."
Click to expand...
Click to collapse
Good to know! I've had so many phones and this hardware looks so awesome for the price, but of course vzw isn't gonna play nice with it without some work. Looking forward to getting mine
Verizon still working fine for me.
After the b27 update I saw improved signal strength. I'm on page plus mvno. After driving in a fringe reception area, I lost lte,and I showed as roaming. It seemed to be using boost Mobile from what the phones network menus displayed. Axon doesn't have a mobile network setting for 'system b', only auto & home only. Tried both, rebooting each time, no fix. I ended up resetting phone, fixed it all. I then switched mobile network to home only, and hoping that it's done.
PS-after b27 I had to re-enable a couple settings, pinch for screen shot, etc.
Edit: it's now been several weeks with it set to home network only. I daily drive in fringe reception areas and have better signal strength than ever, with any phone/carrier combo. All is great, no more issues. Great phone!
For reference, I'm on page plus mvno, dropped in my activated sim from my old phone into the right-side sim slot for CDMA services. Then set to home only. Done.
Sent from my Axon 7 using XDA Labs
Just wanted to see if anyone else had inputs of post update Verizon service, good and bad... hasn't been a ton of chatter in the last week. I have a phone on its way from the egg, trying to decide if it's worth starting a new sim card with Verizon and dealing with that work around... is getting the number off a display and ordering online still the easiest way to get activated?
Works great on VZW still. Love the phone.
methcat said:
Just wanted to see if anyone else had inputs of post update Verizon service, good and bad... hasn't been a ton of chatter in the last week. I have a phone on its way from the egg, trying to decide if it's worth starting a new sim card with Verizon and dealing with that work around... is getting the number off a display and ordering online still the easiest way to get activated?
Click to expand...
Click to collapse
I'd say that the Axon works just as well on Verizon as it did prior to the update, but with potentially better signal strength though I didn't really have a big issue with that prior to the update so I'm not sure (the T-Mobile SIM does seem to do a lot better post-update...but Verizon has always worked well).
I really doubt you'll have any substantive trouble with VZW on this device, especially if you're willing and able to mess a bit with some of the more advanced settings just in case a problem does arise. Here are the oddities, and I'm trying to list *all* of them!
1. No VoLTE or (I presume) HD calling
2. Voicemail appears to have to be accessed by dialing *86 as opposed to long-pressing the '1' key
3. Roaming icon is present intermittently
4. Data roaming *must* be enabled to ensure consistent and reliable data service
5. Verizon's website won't recognize the device at all in the Account Overview pages (mine still shows the last "approved" device I had with my VZW SIM - an iPhone 6S)
6. MMS *may* require a hack to get the proper APN, though I've had no trouble with this (I'm prepaid though); the hack requires a GSM SIM, so beware of this
7. 1X reception *seems* a tad weak in terms of dBm but functionally it almost seems better than my other Verizon phones (weird!)
8. Carrier label will be either '123456,' '002127' (EvDO only), or (I think?) '31000' when not using LTE (i.e., 1X or 3G). When on LTE the phone should show "Verizon Wireless" as normal
9. A SIM/modem reset may be necessary once in a great while it seems...so it's good to understand how to navigate to the "Phone Information" screen to toggle radio settings...also, I've found just SIM-cycling with a GSM SIM will often fix any connectivity problems as well...and sometimes just rebooting the phone with no SIM at all can help too (or a combo of all the above!)
If you can tolerate the above issues then the phone is great. I really enjoy it. I've found the Verizon side of things to be pretty reliable on the Axon 7, even with my endless tinkering with radio modes and other stuff, which has seemed to get me into (recoverable) trouble a few times.
Most importantly - the endless chatter on various forums that Verizon "blocks" the Axon 7 and other non-approved devices is total bunk. In every case where I've run into an issue it can be resolved on my side - Verizon is doing nothing whatsoever to inhibit the use of the Axon 7 on its network as far as I can tell (notwithstanding activation hurdles, admittedly)...many of the people making such claims seem to be speaking from a standpoint of total ignorance and it's kind of getting annoying, to be honest...it seems like the minute someone has an issue with the Axon 7, some ignoramus gets on the relevant forums/comments and claims that Verizon is "blocking" the device. Total BS IMO.
Good luck! As far as activation is concerned...I'd say it might be best to just go to Wal-Mart and buy a cheap prepaid phone or something (looks like the HTC Desire 526 has a nano-SIM and is only $37.49 on their website)...or maybe a cheap nano-SIM'd Verizon phone off of Swappa or eBay? That's probably what I'd do...But I know neither of those solutions are particularly helpful...VZW definitely makes it a bit of a pain.
flyer_andy said:
I'd say that the Axon works just as well on Verizon as it did prior to the update, but with potentially better signal strength though I didn't really have a big issue with that prior to the update so I'm not sure (the T-Mobile SIM does seem to do a lot better post-update...but Verizon has always worked well).
I really doubt you'll have any substantive trouble with VZW on this device, especially if you're willing and able to mess a bit with some of the more advanced settings just in case a problem does arise. Here are the oddities, and I'm trying to list *all* of them!
1. No VoLTE or (I presume) HD calling
2. Voicemail appears to have to be accessed by dialing *86 as opposed to long-pressing the '1' key
3. Roaming icon is present intermittently
4. Data roaming *must* be enabled to ensure consistent and reliable data service
5. Verizon's website won't recognize the device at all in the Account Overview pages (mine still shows the last "approved" device I had with my VZW SIM - an iPhone 6S)
6. MMS *may* require a hack to get the proper APN, though I've had no trouble with this (I'm prepaid though); the hack requires a GSM SIM, so beware of this
7. 1X reception *seems* a tad weak in terms of dBm but functionally it almost seems better than my other Verizon phones (weird!)
8. Carrier label will be either '123456,' '002127' (EvDO only), or (I think?) '31000' when not using LTE (i.e., 1X or 3G). When on LTE the phone should show "Verizon Wireless" as normal
9. A SIM/modem reset may be necessary once in a great while it seems...so it's good to understand how to navigate to the "Phone Information" screen to toggle radio settings...also, I've found just SIM-cycling with a GSM SIM will often fix any connectivity problems as well...and sometimes just rebooting the phone with no SIM at all can help too (or a combo of all the above!)
If you can tolerate the above issues then the phone is great. I really enjoy it. I've found the Verizon side of things to be pretty reliable on the Axon 7, even with my endless tinkering with radio modes and other stuff, which has seemed to get me into (recoverable) trouble a few times.
Most importantly - the endless chatter on various forums that Verizon "blocks" the Axon 7 and other non-approved devices is total bunk. In every case where I've run into an issue it can be resolved on my side - Verizon is doing nothing whatsoever to inhibit the use of the Axon 7 on its network as far as I can tell (notwithstanding activation hurdles, admittedly)...many of the people making such claims seem to be speaking from a standpoint of total ignorance and it's kind of getting annoying, to be honest...it seems like the minute someone has an issue with the Axon 7, some ignoramus gets on the relevant forums/comments and claims that Verizon is "blocking" the device. Total BS IMO.
Good luck! As far as activation is concerned...I'd say it might be best to just go to Wal-Mart and buy a cheap prepaid phone or something (looks like the HTC Desire 526 has a nano-SIM and is only $37.49 on their website)...or maybe a cheap nano-SIM'd Verizon phone off of Swappa or eBay? That's probably what I'd do...But I know neither of those solutions are particularly helpful...VZW definitely makes it a bit of a pain.
Click to expand...
Click to collapse
#6 might not need the GSM SIM workaround anymore after the B27 update. The + sign shows up for me all the time now, even if I only have a Verizon SIM inserted.
thanks for the list guys, i think i'll give it a shot. i'm going to try to add it as a second line to my wifes plan online. is borrowing a friends imei from a nano phone still the best way to get a new activated sim for this phone?
that 526 is a predaid, will verizon just switch that sim to plan if i call in? or are they different?
---------- Post added at 03:42 PM ---------- Previous post was at 03:18 PM ----------
methcat said:
that 526 is a predaid, will verizon just switch that sim to plan if i call in? or are they different?
Click to expand...
Click to collapse
found this, not sure if this is still the rule...
http://www.prepaidphonenews.com/2016/02/new-policy-may-require-verizon-prepaid.html
"It turns out that Verizon made a policy change effective 1/17/16 that requires Verizon Prepaid Phones to be activated on Verizon Prepaid and have at least $30 in airtime applied to them before they cam be used on Verizon postpaid. A Reddit user posted a copy of an internal Verizon document detailing the new rule:
Effective 1/17/2016, customers who purchase a Prepaid 4G device must activate on a $30, $45, or $60 Prepaid plan and make at least 1 monthly service payment before they are eligible to move the device to a new or active Postpay account .
Device remains locked until first month’s payment is made on their Prepaid plan.
Device is unlocked automatically upon successful first month’s payment and can be used on Postpaid plan (new SIM or SIM swap).
Attempting to use an active Postpay SIM Card with a new 4G LTE Prepaid PIB smartphone prior to making the required monthly payment, hotlines the Postpay MDN (SFO 83643) . The hotline remains until first month’s payment is made.
Customers who activate on the $45 or $60 Prepaid plans and enroll in Auto Pay, receive bonus 1GB data per month.
If account is hotlined:
Data access, outgoing calls, and text messaging do not work.
Text message is sent to smartphone.
*VZW FREE MSG: Phone must be activated on Verizon Wireless Prepaid service and first monthly payment must be made before it can be used with any other service. *
Auto-remark is placed on the customer's account.
*SIM Swap attempted: MDN Hotlined. Phone must be activated on VZW Prepaid service and first month paid before it can be activated as postpaid. *"
methcat said:
thanks for the list guys, i think i'll give it a shot. i'm going to try to add it as a second line to my wifes plan online. is borrowing a friends imei from a nano phone still the best way to get a new activated sim for this phone?
that 526 is a predaid, will verizon just switch that sim to plan if i call in? or are they different?
---------- Post added at 03:42 PM ---------- Previous post was at 03:18 PM ----------
found this, not sure if this is still the rule...
http://www.prepaidphonenews.com/2016/02/new-policy-may-require-verizon-prepaid.html
"It turns out that Verizon made a policy change effective 1/17/16 that requires Verizon Prepaid Phones to be activated on Verizon Prepaid and have at least $30 in airtime applied to them before they cam be used on Verizon postpaid. A Reddit user posted a copy of an internal Verizon document detailing the new rule:
Effective 1/17/2016, customers who purchase a Prepaid 4G device must activate on a $30, $45, or $60 Prepaid plan and make at least 1 monthly service payment before they are eligible to move the device to a new or active Postpay account .
Device remains locked until first month’s payment is made on their Prepaid plan.
Device is unlocked automatically upon successful first month’s payment and can be used on Postpaid plan (new SIM or SIM swap).
Attempting to use an active Postpay SIM Card with a new 4G LTE Prepaid PIB smartphone prior to making the required monthly payment, hotlines the Postpay MDN (SFO 83643) . The hotline remains until first month’s payment is made.
Customers who activate on the $45 or $60 Prepaid plans and enroll in Auto Pay, receive bonus 1GB data per month.
If account is hotlined:
Data access, outgoing calls, and text messaging do not work.
Text message is sent to smartphone.
*VZW FREE MSG: Phone must be activated on Verizon Wireless Prepaid service and first monthly payment must be made before it can be used with any other service. *
Auto-remark is placed on the customer's account.
*SIM Swap attempted: MDN Hotlined. Phone must be activated on VZW Prepaid service and first month paid before it can be activated as postpaid. *"
Click to expand...
Click to collapse
Dang...yeah I think you're right about this. My mistake...ugh I wish they'd just make it easy! In that case I'd say Swappa would be the best route...I've bought a few phones off of there and it's always been a great experience.
What are your APN settings? I'm having issues getting my data to work on Verizon.
Salmonella lolz said:
What are your APN settings? I'm having issues getting my data to work on Verizon.
Click to expand...
Click to collapse
Mine: http://forum.xda-developers.com/showpost.php?p=68263623&postcount=61
So frustrating. Before update used today Verizon in upper left corner. Switched to 123456 after update. Rebooted and it went back. After another reboot it only says 123456 and nothing I do will change it back. And now when I get an MMS hangouts tells me it needs to download it but nothing happens. I never get LTE anymore either.
Edit: not sure what I did but it's back now. Might have something to do with bearer in apn settings being lte.
KyJelly69 said:
So frustrating. Before update used today Verizon in upper left corner. Switched to 123456 after update. Rebooted and it went back. After another reboot it only says 123456 and nothing I do will change it back. And now when I get an MMS hangouts tells me it needs to download it but nothing happens. I never get LTE anymore either.
Edit: not sure what I did but it's back now. Might have something to do with bearer in apn settings being lte.
Click to expand...
Click to collapse
That's #9 in the above list that was posted. Need to cycle the modem state of the device.
so, can someone help me with a little clarification? did ZTE ever actually disable anything regarding Verizon on this phone? i know when people quote the webinar, it sounded like they were going to. i understand that the functionality is basically all still working, but i'm wondering if maybe i'm confused on the terminology.
in this post on reddit, i heard the same thing that has been repeated by some, and i am wondering if i have my band terminology confused. is the cdma part different from the 4g lte part(and that's why it's still working)?, or is sarah just incorrect?
SarahSchmera 3 points 9 hours ago
Axon 7
Doesn't work on Verizon yet. It supposedly has CDMA radios but the radio firmware has them disabled. ZTE can't by law enable the CDMA radios because they didn't get FCC approval for the CDMA radios. They would have to pay for the testing and then resubmit the device to the FCC to get approval before they turned on the CDMA radios through a software update.
And the device doesn't have the firmware for VoLTE, HD calling or WiFi calling on Verizon.
Click to expand...
Click to collapse
At&t V410 trying to get hotspot working with various releases to no avail.
The closest attempt was with the actual old at&t firmware that gives me the dreaded
tether_entitlement_check_state 5 after initial state setting 1
-1 doesn't work.
tether_dun_required 0
net.tethering.noprovisioning true
cm 14.1 and crDroid the on/off slider just says error without any authorization attempt.
Methinks at&t crumbs still leftover somewhere preventing hotspot usage without at&t sim.
Like the dns was still set to at&t instead of tello.
Tello sim works fine in my hotspot but I wanted value added using it in the g pad 7
If I let the g 7 select the provider I get a cool tiny 4g icon with flames at the top.
If I choose tello manually it just says LTE
Network works fine for apps,just no hotspot or usb tethering available.
Reading other reviews of the AT&T hotspot, this is how it works: you have to purchase additional hotspot service from AT&T.
Carrier unlocked
tello sim
lineage os 14.1 won't let me select a network provider.
searching fails.
I had to let the firmware decide.
Never saw that before.
Next on the hit list is CM 14.0
In previous episodes with the tello sim in other phones, there were always default APN's listed
in the cellular setup. No so with this device even with at&t firmware.
There are threads here about that with old android firmwares,some xml file that is not working right.
With CM 14.0 unofficial,there is a new item in the network menu called mobile plan.
That give me the error "tello has no known provisioning site"
The g pad just hosed up on me so I will have to recover and start from scratch.
I was going to add dun to the apn type mentioned in other hotspot not working threads.
Endeavor to persevere.
needful things?
wifi.tethering.interface=ap0
wifi.direct.interface=p2p0
neither one in the firmwares.
bluetooth internet tethering working as we speak.
typing via it now.
1/2 the fun is finding the correct pc drivers (Qualcomm)
My goal in life was using the tello sim in the g pad for hotspot fun, so partial goal reached.
Baby steps.
Maybe somebody higher up on the food chain can look into the hotspot problem now that your not locked into using at&t.
Tello is $15 a month for 5gig no taxation.Option to toss some phone action on it also for a few dollars more.I noticed running out of high speed data initially the thing is still good for email
at pitiful 2g speeds.
Years ago trying a safelink sim in an unlocked tracfone,I had to use IMSI as the MVNO type to get hotspot and tethering working.That trick didn't work this time.Tello wants you to connect to "wholesale" apn but various names will work, like:
broadband
fota
ims
CM14.0 unofficial the billing start date works backwards.
mine was set to start the 31st,not end on the 31st.
it kept track of yesterday usage but erased today to zero (the 1st of the month)
when you select usb tethering,the phone turns on the RNDIS interface to the pc but doesn't work.You can also do it from the developers menu usb interface type.
no volte,so you are limited to text and data.
Ended up going with lineage os 14.1
A real knee slapper.
The v410 will only charge when turned on.
crDroid 7.1.2 I had it off all night on the charger and this morning the battery was down to 22%