Related
Well, flashing a custom ROM on our beloved Iconias became quite easy now thanks to developers on xda. Most of you are quite familiar with the procedure but there are still people that ask basic things all over the ROM developement threads. This is just a beginner's guide, an attempt to collect all the procedures and tools in one thread. Nothing of this is my work and I would like to say THANK YOU to sc2k, thor2002ro, Euclid's Brother, Chainfire, monki-magic, drellisdee, ezterry, Skrilax_CZ, gersma and all A500 developers for making this possible.
You will need the following: external SD card, root rights, unlocked bootloader (if you're on stock ICS), custom recovery and a custom ROM of your choice.
Well lets start by placing an SD card in the SD card expansion slot. Its file system should be FAT32!
*This is optional: To be sure it is recognized later in CWM, format it first with SD Formatter - a tool that can be downloaded from here. Use your home computer / notebook with a card reader for this procedure. Alternatively you can do this using an ANDROID phone.
1.ROOT
Root for Honeycomb 3.0.1 by monki-magic
original thread by Slowie911 here
1. Make sure usb debugging is turned on and unknown sources is selected in Applications settings.
2. Have a micro sd card inserted and turn the tablet on portrait mode and lock it with the switch to fix it in portrait.
3. Download and execute the attached apk. (i had to download from my comp and transfer to the tablet for it to work).
4. Once the apk is installed run the root procedure within the app which was installed
5. Wait and you will receive full root access.
Download Gingerbreak 1.20
Root for Honeycomb 3.1 by sc2k thread here
1. Goto Settings->Applications and enable "Unkown sources"
2. Download the attached APK file
3. Copy the file to your Iconia
4. Install the APK & start the tool
5. Click "root"
6. Enjoy
/IconiaRoot should work on both 3.0.x and 3.1/
Download Iconiaroot 1.3
Root for Honeycomb 3.2.x OTA
Unfortunately there's no dedicated rooting app yet developed for HC3.2. It also comes with a new bootloader. In order to get root you need to revert to an older version of Honeycomb first where Iconiaroot works. How to do that is explained in details in this thread
UPDATE: if you're on OTA HC 3.2.x then you can just update to ICS and use the method for rooting ICS - links posted below
Root for ICS 4.x.x OTA
Stock ICS Leak One-Click Root Tool by blackthund3r
or
Full root for A500 ICS 4.0.3 - Simple method, posted by ZeroNull
2. Bootloader
Since there are many new ICS custom ROMs and custom recoveries, please read in their dedicated threads if they require ICS bootloader. Some of the ROMs can recognize the version of your bootloader and load the proper boot.img during boot. In general - if you're on Honeycomb - you have HC bootloader. If you've updated OTA to ICS, then you have stock ICS bootloader, that is unusable for flashing custom ROMs and therefore you need the unlocked bootloader. A guide on how to install it read here - thanks civato. This thread links to a nice little piece of software (option 1) by gersma that can automatically do all the job for you - install ICS unlocked bootloader and custom recovery. Read and download here - AfterOTA by gersma
3.Custom recovery
original thread with clockworkmod recovery by thor2002ro here
1. Open Market app with your tablet and search for Acer Recovery Installer.
Acer recovery installer
2. Install it and then open it. It has ClockworkMod Recovery by thor2002ro rev1.3.4 built-in.
3. Select "ClockworkMod Recovery rev.1.3.4 by thor2002ro". Tap on install Recovery Image. A popup offering to backup current recovery image will appear. Surely, buckup! Thus you can restore your original recovery image in case of need. Then CWM will be installed. Once it is installed you can remove Acer Recovery Installer tool from your system if you want.
thor2002ro updated CWM to 1.7.3. You can download the zip from tegraowners.com. Later versions of his recovery does not meet GPL because of the "mini" kernel of his - sources not being released. It supports flashing both from internal memory and the external SD card. In order to update your CWM to this latest version, place the downloaded ZIP on your external sd card and update from your CWM by choosing install zip from sd card. Alternatively you can extract the recovery.img from the zip, place it on your external sd card and install it through Acer Recovery Installer by choosing Custom or Stock recovery.img from micro sdcard.
GPL compliant recoveries
RA Revamped for Iconia
TeamWin Recovery Project (twrp) - needs ICS bootloader
A500 Public Recovery
Since the creation of AfterOTA by gersma, you can use his software to install both the bootloader and CWM before flashing the ROM. Get it HERE
4. Flashing custom ROM
Download the ROM of your choice which should be a zip file. Place the zip on your EXTERNAL SD card. Power off your device. Now hold volume down and power buttons together until you see text appearing on the top left corner of the screen - you can release both buttons now. Wait until CWM loads. Volume keys (Up and Down) are used to navigate the CWM menu. Power button is uded as "Enter" i.e. to proceed with your selection. Before going on to install your ROM do a full backup of your system first. Navigate to "backup and restore" and then select Full Backup. Wait untill the operation completes.
Now do the following:
Wipe menu:
- wipe data/factory reset -> navigate to "Yes - delete all user data"
this should format you data partition and cache partition (dalvik cache is gone as well)
Mounts and storage menu
- Format System
this should format your system partition
The above commands are presented in thor's CWM. There are slightly different menus and sub-menus in the other custom recoveries but if you dig a little you'll find that they do the same things and you'll get the idea of what you're doing.
Now you're ready to install your ROM. Get back to the main CWM menu and select
- Install zip from sdcard -> choose zip from sdcard.
Navigate to your zip on the SD card and install it - choose "Yes" again to install. Wait untill installation is complete, return to the main CWM menu and choose "reboot system now".
You're done, enjoy your first custom ROM. Take time for its initial configuration.
5. Flashing custom KERNEL
Flashing custom kernel is as same as custom ROM. You place the zip (Kernels come in zip files as well) on your external SD card and:
- Install zip from sdcard -> choose zip from sdcard.
It is recommended before flashing a new kernel to wipe cache partition and dalvik cache. And of course first you flash the ROM and then the desired Kernel
6. UNBRICKING by flashing a stock ROM
thanks to vache we have full packages shared in his topic
vache said:
Once the desired file downloaded, you have to use Acer Update Decryter by thor2002ro to decrypt them.
After decrypting the file, you have to extract the update.zip from it, put it on an external SDCard (does not work on internal memory) and boot your tablet with Vol- & Power. The update will launch automatically.
Click to expand...
Click to collapse
p.s. Feel free to add stuff to this tutorial - video, pistures or anything you find useful or to correct me if I've made a mistake.
This is fantastic. Thank you. I have had my iconia for a month now and been looking at flashing a custom rom but kept backing out. Just a couple of questions for clarification:
(1). Does wiping data erase the internal sd?
(2). If by some stroke of bad luck a flash is unsuccessful and a boot loop or similar occurs, am I right in my understanding that you can just go straight back into recovery and re-flash?
(3). What are the chances of bricking the tablet?
Sorry for noon questions, please just wanna certain because my gf bought me this tablet under the condition I don't do anything risky like on my x10 that I flash almost daily haha
Thanks for replies
Sent from my A500 using XDA Premium App
kylec said:
This is fantastic. Thank you. I have had my iconia for a month now and been looking at flashing a custom rom but kept backing out. Just a couple of questions for clarification:
(1). Does wiping data erase the internal sd?
(2). If by some stroke of bad luck a flash is unsuccessful and a boot loop or similar occurs, am I right in my understanding that you can just go straight back into recovery and re-flash?
(3). What are the chances of bricking the tablet?
Sorry for noon questions, please just wanna certain because my gf bought me this tablet under the condition I don't do anything risky like on my x10 that I flash almost daily haha
Thanks for replies
Sent from my A500 using XDA Premium App
Click to expand...
Click to collapse
1. No, it doesn't.
2. Yes. You can do that. There's another option in mounts and storage -> format system - that will format even your system partition and leave your device bare with no ROM files on it. That would be a really clean install I guess
EDIT: I just saw that system is formatted during ROM installation. So no need to do that
3. Always read first what option you've selected and be sure you understand what it does. If you have CWM successfully installed, you have a powerfull tool to restore reflash, wipe, format etc. I've flashed my HD2 hundreds of times and now my Iconia is on the run Never ever had a boot failiure.
drkalo said:
1. No, it doesn't.
2. Yes. You can do that. There's another option in mounts and storage -> format system - that will format even your system partition and leave your device bare with no ROM files on it. That would be a really clean install I guess
3. Always read first what option you've selected and be sure you understand what it does. If you have CWM successfully installed, you have a powerfull tool to restore reflash, wipe, format etc. I've flashed my HD2 hundreds of times and now my Iconia is on the run Never ever had a boot failiure.
Click to expand...
Click to collapse
Thank you very much. I will click thanks when I'm on my computer :-D
Sent from my A500 using XDA Premium App
VERY good information here. Thank you very much for taking the time.
I've flashed ROMS on my last two "chinatabs" but haven't gotten into it with my A500 yet. (To be frank, I'm still thrilled with the prospect of OTA updates from a manufacturer after my last experiences.)
It looks like the process is very similar to my Rena3 tablet.
strider_mt2k said:
VERY good information here. Thank you very much for taking the time.
I've flashed ROMS on my last two "chinatabs" but haven't gotten into it with my A500 yet. (To be frank, I'm still thrilled with the prospect of OTA updates from a manufacturer after my last experiences.)
It looks like the process is very similar to my Rena3 tablet.
Click to expand...
Click to collapse
Thank you, that lays it out all nice and precise for us all. Like strider_mt2k, I have been holdng off on the custom ROMs, because my first tablet was a Gtab, and while it became a pretty awesome tablet, it had to be flashed with a custom ROM to be really usable. The OTA thing was holding me back. But I think that I may try to flash the thing this weekend if I get the chance.
Thanks. Glad it could be of use.
nice tutorial dude! thanks!!
could you please make another tutorial to return back to stock?
specially to return back to stock te kernel.
thanks!!!
As mentioned, best case is if you've backed up your device before flashing any ROM or Kernel. Thus you can restore to your country specific version.
Otherwise its pretty simple - its just like flashing any other ROM following the steps described.
Download the stock one that dr1337 shared from here:
http://forum.xda-developers.com/showthread.php?t=1154492
or choose the right full package - shared by vache:
decript it with Acer update decripter by thor2002ro
Of course they come with stock kernel
I am new in this with flashing and that kind of stuff.
Now is my question, how is it with updates from acer?
Greetz
distructor said:
How is it with updates from acer?
Click to expand...
Click to collapse
I'm not sure I understand your question. Could you be more specific?
if i put a custom rom on the device could i still use the build in update program of acer?
distructor said:
if i put a custom rom on the device could i still use the build in update program of acer?
Click to expand...
Click to collapse
Unfortunately I can not tell you for sure. I haven't tried all of the custom ROMs but in most cases - no you won't be able. I've tried Tabooney, Honeyvillain, Virtuous Picasso, Virtuous Galaxy. ROM developers usually update their ROMs to the latest base available. I think it depends on many things - base, kernel, stock apps removed etc.
Maybe someone who have succeeded with custom ROM updating would share his experience.
Can anyone tell me if there is a version of ROM manager that supports the version of CWM that there is for the Iconia. I would love to be able to simplify my ability to backup my ROM's before flashing.
synapses11 said:
Can anyone tell me if there is a version of ROM manager that supports the version of CWM that there is for the Iconia. I would love to be able to simplify my ability to backup my ROM's before flashing.
Click to expand...
Click to collapse
You can install a clockworkmod for Iconia no matter of the version of ROM manager. But it is much much easier to use Acer Recovery Installer. I recommend you using it instead of playing with recovery img files. It is a one time procedure after all
Anyway - here's what you need to do if you don't want to use Acer recovery installer, or you don't want to use ADB:
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-3-using-rom-manager/
instead of CWM 3.x you will need to get CWM from thor2002ro In this guide you substitute the recovery that ROM Manager is about to flash with thor's CWM. I haven't tried this method myself but it should work.
With Acer Recovery Installer you can flash custom recovery as well. As long as you have it in IMG format you can be flashed from within the app - "install custom or stock recovery image from sd card".
great thread.
thanks!!!
Great Tutorial!!!
Just a couple of doubts:
First question: Backup files.
3. Flashing custom ROM
"...Before going on to install your ROM do a full backup of your system first. Navigate to "backup and restore" and then select Full Backup. Wait untill the operation completes. "
Where do the backup files go in the system? On internal or external SD card? Is it an *.img file extension?
Should i move it to my computer to keep it save, or just leave it where ever they are?
Second question: Kernel.
4. Flashing custom KERNEL
"Flashing custom kernel is as same as custom ROM. You place the zip (Kernels come in zip files as well) on your external SD card and:
- Install zip from sdcard -> choose zip from sdcard.
It is recommended before flashing a new kernel to wipe cache partition and dalvik cache. And of course first you flash the ROM and then the desired Kernel"
I am on Stock 3.1 ROM with original Kernel, if i want to try Virtuos Picasso, do i have to flash a new Kernel? And if yes, shouldn't i do it before flashing the ROM? Or just flash the ROM and then the Kernel? What happens if i just flash the Rom and use the stock kernel?
Thank you..
Your backup goes to your external SD card in a folder named clockworkmod\backup\2011-XX-XX.HH.MM.SS
As you can guess the name of the backup corresponds to the time it is created. This backup can be used to restore your system through CWM in case of need.
CWM does not backup /data/media folder. Additionally: you should also delete .android_secure.img from your backup set or a full restore will fail before it restores flexrom.
The last is an issue described by Euclid's brother:
http://forum.xda-developers.com/showpost.php?p=16467191&postcount=3
I am on Stock 3.1 ROM with original Kernel, if i want to try Virtuos Picasso, do i have to flash a new Kernel?
Click to expand...
Click to collapse
No, of course! Your custom ROM (Virtuous Picasso in your example) and any ROM comes with its Kernel. Its up to you to decide wheather to change it or not after that by flashing another Kernel. Follow every Kernel developer's notes for ROM compatibility. So, that answers the last part of your question - you cannot flash Virtuous Picasso and still think you're on stock kernel
drkalo said:
No, of course! Your custom ROM (Virtuous Picasso in your example) and any ROM comes with its Kernel. Its up to you to decide wheather to change it or not after that by flashing another Kernel. Follow every Kernel developer's notes for ROM compatibility. So, that answers the last part of your question - you cannot flash Virtuous Picasso and still think you're on stock kernel
Click to expand...
Click to collapse
Oh, i see...i thought that the flashing ROM procedure of a custom ROM, would just flash the ROM and not the Kernel...so in this case i just have to choose the ROM that i want to flash and do not have to pay attention about the Kernel compatibility...unless i flash a Kernel only. Right?
Thank you very much!!
That is correct
Hey guys, I'm new to XDA and I have a few questions needed to be answered if you don't mind .
So an "official" ICS leak came out not too long ago, and tonight I tried installing it on my a500. By "it" I mean the stock leak for unrooted devices. Problem is, it's not working.
Long story short, I Googled like crazy looking for answers to these questions, and I found no specific answers anywhere from Iconia users, only by people with Droid phones.
I need to know the answers for
1) Can I install the stock version ICS from my internal SD card? If so, how?
2) How do I do this without rooting my device?
3) After renaming the download to "update.zip", as some have said, do I first extract the contents then place them in a folder called update.zip, or leave it as is and rename the large file?
In the end, I renamed the file to "Update.zip" without extraction, then reboot my device in recovery mode. The green Droid came on, then a warning sign, and nothing happened. How do I boot the ICS?
Sorry if this seems like a lot, I barely know any of the technical aspects of this stuff!
must be on externel SD with stock recovery.
same thing happend to me. I found out that my pc named the zip update.zip.zip, i used file explore on my 500 and took of the extra .zip and flashed it. And it worked perfectly.
0) You shouldn't have messed with this without first understand exactly what and how you do it. There's a really BIG STOP sign in the thread. Read the thread first to avoid bricking your device. Everything is here, so you don't have to "google like crazy".
To your questions:
1) No. You need an external SD for your stock recovery to flash the update.zip
2) Copy update.zip to the ROOT of your external SD card, power off, then power on, while holding Volume DOWN key
3) You should not extract the archive.
About root - it's a nice thingy - you are able to install a custom recovery in order to BACKUP your current firmware. Then you can flash one of the 4 custom ICS ROMs that will keep your recovery safe and not overwrite it. Actually you can flash very easily any custom a500 ROM with a custom recovery.
Now, try to flash again by using an external SD, if it still doesn't boot, try to hard reset the device (tutorial on how to hard reset - in my signature - in the revert to 3.0.1 thread)
If it still doesn't boot, read this thread on how to recover your tab:
http://forum.xda-developers.com/showthread.php?t=1516012
Good luck.
drkalo said:
0) You shouldn't have messed with this without first understand exactly what and how you do it. There's a really BIG STOP sign in the thread. Read the thread first to avoid bricking your device. Everything is here, so you don't have to "google like crazy".
To your questions:
1) No. You need an external SD for your stock recovery to flash the update.zip
2) Copy update.zip to the ROOT of your external SD card, power off, then power on, while holding Volume DOWN key
3) You should not extract the archive.
About root - it's a nice thingy - you are able to install a custom recovery in order to BACKUP your current firmware. Then you can flash one of the 4 custom ICS ROMs that will keep your recovery safe and not overwrite it. Actually you can flash very easily any custom a500 ROM with a custom recovery.
Now, try to flash again by using an external SD, if it still doesn't boot, try to hard reset the device (tutorial on how to hard reset - in my signature - in the revert to 3.0.1 thread)
If it still doesn't boot, read this thread on how to recover your tab:
http://forum.xda-developers.com/showthread.php?t=1516012
Good luck.
Click to expand...
Click to collapse
The above could not have been said any better by anyone. EXACT TRUTH.
i just want to add this is a leak for the a500 . I do not think i would call it official.Also Remember Its yet to be known of the procedure you will have to fallow to accept the RELEASE IF I C S from acer in April (when they say anyway)
Thou from the past i can nearly guarantee you there will be a way. But could require you to downgrade root and flash one of the many ics cwm roms..as in the post above mine signature
drkalo said:
0) You shouldn't have messed with this without first understand exactly what and how you do it. There's a really BIG STOP sign in the thread. Read the thread first to avoid bricking your device. Everything is here, so you don't have to "google like crazy".
To your questions:
1) No. You need an external SD for your stock recovery to flash the update.zip
2) Copy update.zip to the ROOT of your external SD card, power off, then power on, while holding Volume DOWN key
3) You should not extract the archive.
About root - it's a nice thingy - you are able to install a custom recovery in order to BACKUP your current firmware. Then you can flash one of the 4 custom ICS ROMs that will keep your recovery safe and not overwrite it. Actually you can flash very easily any custom a500 ROM with a custom recovery.
Now, try to flash again by using an external SD, if it still doesn't boot, try to hard reset the device (tutorial on how to hard reset - in my signature - in the revert to 3.0.1 thread)
If it still doesn't boot, read this thread on how to recover your tab:
http://forum.xda-developers.com/showthread.php?t=1516012
Good luck.
Click to expand...
Click to collapse
Thanks! This all makes sense. However, there remains something unclear to me. If I have to use an external SD to boot a leaked ROM, how/where does the OTA update install from on my internal sd card? Can't I just place this ROM where the OTA usually loads from and run recovery after that? Thanks in advance
austin148 said:
Thanks! This all makes sense. However, there remains something unclear to me. If I have to use an external SD to boot a leaked ROM, how/where does the OTA update install from on my internal sd card? Can't I just place this ROM where the OTA usually loads from and run recovery after that? Thanks in advance
Click to expand...
Click to collapse
The way you can flash it yourself (stock recovery: Vol down + power) requires an external SD. You don't have access to your internal storage by using stock recovery and there's no "key combo" you can use to do that. Once you install custom recovery, you'll be able to flash from Internal memory as well (thor's does, still haven't used RA recovery and don't know about it).
...But in order to install custom recovery, you need root. Custom recovery allows you to make full backups of your currently running FW + app data. If you're still on Honeycomb I recommend you get an external SD and go for the method 2 downgrade procedure and root it or go for timmyDean's procedure that installs rooted stock 3.2.1 ROM on your device (says it does need an external SD so it might be your choice), then install CWM and voila - you're in control and you can wipe your tab and install whatever cusom ROM you like....and you backup first of course
If you don't feel like messing with your tab's system, then wait a little more for ACER to release ICS OTA update.
Hi everyone
Last week I tried to flash Paranoid Android 2.52 over Slim 2.8, but then my phone started to bootloop. I was unable to get it to boot into recovery, only download mode. Flashing a stock ROM with and without .pit file and repartition would not let it boot. I tried to flash various versions of Semaphore with Odin, it succeeded but the phone still wouldn't boot into recovery. I tried CF-Root JW4 4.4 with success, it booted into recovery, but flashing a stock ROM still couldn't make it boot.
So I flashed Semaphore 2.5.0 through CWM, but from this recovery I can't flash anything, can't restore any backup and can't mount partitions like /data and /system. Does someone knows how could I bring my GS back to life ? Thanks.
I've used odin to root and flash cwm on the SII, SIII and Note I and II, I'm hoping it's similar. Have you already started from scratch? Flashed stock and then try and root again and go from there? See if there is a 'superwipe' option in any of the forums for your device to completely wipe it, storage and everything.
Sent from my SGH-T889 using Tapatalk 2
As I said, I tried to flash stock GB ROM first, I think that's what you mean by start from scratch, but it seems like I can only flash kernels... I'm gonna check for a superwipe.
Edit : it seems like there's no superwipe for i9000...
Aqua-Niki said:
As I said, I tried to flash stock GB ROM first, I think that's what you mean by start from scratch, but it seems like I can only flash kernels... I'm gonna check for a superwipe.
Edit : it seems like there's no superwipe for i9000...
Click to expand...
Click to collapse
try to format everything ( after you have saved your important files to PC) in CWM and than go into download mode and flash a JVU ROM +Root +CWM with 512 pit from My Android Collection
Need to know what is your phone model . Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
you can get a rescue kit from My Android Collections and or a solution from My Android Solutions
Need a guide, look into My Guides and Manuals
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
My phone is the international GS (i9000). I can't even format the partitions =/ I already tried the 1 minute power button manip, without SIM card and SD, and it didn't help me flash... What ROM should I try ? Froyo, GB, one in particular ?
Aqua-Niki said:
My phone is the international GS (i9000). I can't even format the partitions =/ I already tried the 1 minute power button manip, without SIM card and SD, and it didn't help me flash... What ROM should I try ? Froyo, GB, one in particular ?
Click to expand...
Click to collapse
look in My Android collections , under rescue / recovery kit, i9000 Upgrade or Downgrade to GingerBread 2.3.6 ROM JVU + Root with a 512 Pit File (repartition Ticked) Ideal base for upgrading to ICS and J.Bean
It worked, thanks a lot ! =)
Your Choice of Android,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose your Flavor
First Time (Noob / Newb) to Flash a ROM on i9000must readBe Sure First.
NOTE: This guide is meant for i9000 only, not i9000B, M or any other mentioned below
There are 20 versions of Galaxy S, and their ROMS may not be compatible with each other,
Make sure you choose the correct ROM for you Device, before flashing it.
Galaxy S GT-I9000 Galaxy S International
Galaxy S GT-I9000B Galaxy S Brazil
Galaxy S GT-I9000L Galaxy S Chile.
Galaxy S GT-I9000M Vibrant Bell
Galaxy S GT-I9000T Galaxy S Latin America
Galaxy S GT-I9001 Galaxy S Plus International
Galaxy S GT-I9003 Galaxy SL International
Galaxy S GT-I9010 Giorgio Armani International
Galaxy S SCH-I500 Fascinate Verizon
Galaxy S SCH-I510 Droid Charge Verizon
Galaxy S SCH-R910 Galaxy S MetroPCS
Galaxy S SGH-I896 Captivate Rogers
Galaxy S SGH-I897 Captivate At&t
Galaxy S SGH-N013 SC-02B Docomo
Galaxy S SGH-T959 Vibrant T-Mobile (USA)
Galaxy S SGH-T959D Fascinate Telus
Galaxy S SGH-T959V Galaxy S 4G T-Mobile (USA)
Galaxy S SGH-I997 Infuse 4g At&t
Galaxy S SHW-M110S SHW-M110S Korea Telecom
Galaxy S SPH-D700 Epic 4g Sprint
Check your IMEI here When you are not sure what model is your device.
Always START Here
Fully Charge your Phone before Flashing
To Check battery level, (WITHOUT plugging in the USB cable).
type *#0228# in the phone dialer, and Voltage value is AT LEAST 3800 (mV).
Check list before attempting to flash a ROM
1) Correct ROM or kernel or required files for device was downloaded
2) Battery was fully Charged
3) Every thing Important was backed up to PC or Ext SD card or Cloud.
a) efs backup
b) Use Call logs Backup, SMS backup. App Backup from Play store and or simply copy everything How to save files to your PC Note:-
It's assumed that you can and know how to connect your Phone to PC with USB cable .
If you do not know, first install Samsung USB drivers on your PC/Laptop, than enable USB debugging on your phone by settings menu > Developer options > tick USB Debugging.
After this use only Samsung USB cable and plug it into your phone micro USB port and to your PC USB Port. ( Always use the Back USB port on PC as some ports may not connect well enough for flashing ROM's. )
If unable to connect your phone to PC for any reason, refer to this guide
How to put your device in "recovery" or "download" modes on Galaxy S i9000?
Volume UP + HOME + POWER will take you to recovery mode
Volume DOWN + HOME + POWER will take you to download modeUse Combo Key Press
Combo buttons must be used as shown above to get your phone into RECOVERY MODE or DOWNLOAD MODE
What if your recovery or download modes cannot be achieved by combo key press on your device?
You can achieve it by methods suggested in My Android Solutions or by using a USB JIG.
Only Rooting or Flashing Kernels or Modems
Follow this, when your phone has a Froyo ROM and you just want to Root or Root and also have CWM
Needed Download for Froyo ROM:-
If you only want root on your Froyo ROM, just install z4root app
If you want root and CWM download a Speedmod Kernel and Flash to get CWM and Root your Froyo ROM. After flashing the speedMod kernel
1) Boot into recovery menu ( VolumeUp+Home+Power)
2) Select "Advanced features" ( Universal Lag Fix menu)
3) Select "Install Superuser" to be rooted
Follow this when your phone has a Gingerbread ROM and you only want Root or Root Plus CWM
Needed Download for Gingerbread 2.3.6 ROM:-
If you are looking at, only Root for your i9000 phone, it can be easily done with Framaroot app. (Its so easy these days)
But if you wish to have CWM recovery too, than flash a Semaphore Kernel or CF Root Kernel to achieve it.
i9000 Semaphore Kernels for Gingerbread, ICS or Jelly Bean & Kit Kat(select according to Version of ROM and chose the latest will be good enough )
i9000 CF Root Kernels for Gingerbread (select according to Version of ROM eg XWJW4 will also work for XWJW6 & XWJW9) )
Odin3 Flashing Tool ( attached below)How to Flash Kernels?Normal Flashing Method :-
Procedure:
1. Fire up Odin3 on your PC and ensure KIES is not running on your PC by killing (Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe) using Task Manager
2. Put the phone to the Download Mode by pressing (VolumeDown+Home+Power) buttons
and connect the phone to your PC (your phone should be recognized)
3. now select PDA and choose the kernel you had downloaded
4. press Start Button. Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
That's it you have now rooted your phone as well as have CWM Recovery. When you have NO access to a Computer or USB Cable
Procedure:-
When you do not have a PC or a USB cable to work with, you can flash Kernels, Modems and even ROM's by using certain Apps like Mobile Odin, Flashify , Flash Gordon or any kernel flashing apps from Play store . So download and install them on your Phone. Detailed guide
In a nut shell, for safety reasons Mobile odin cannot be used to Flash a pit or EFS file, but all others are easily done from your phone without the need to use your PC. Hence CWM can be flashed with a Kernel meant for your phone and from here you can update to ICS or Jelly Bean without a PC or USB cable.
To make it simple
1) Copy File to your SD card (Rom, kernel , or flash files in .tar format)
2) Run Mobile Odin
3) Select Rom/kernel/Modem under Open file , it will automatically sort out the files in the ROM
4) Now you can tick EverRoot, Inject Superuser, if you wish or just flash without them
5) Flash Firmware
That's it, Odin will do everything and you will boot up in NEW firmware or Kernel or ModemFlashing Modem's
Download Stock or ICS or Jelly Bean or Nexus modems from Here
The procedure for Flashing Modems is the same as flashing kernels
Select the modem you wish to test or install as "PDA" in Odin3 and press "START" do not tick anything else or disconnect phone until flashing process is completed
Looking for a ROM? For Stock & Custom ROM or any software Downloads Go here | here or follow this [GUIDE] Unsure which i9000 ROM to choose? or look into the below database to chose what is best for you
Custom ROM's Comparison Database
Mirror
Upgrading (from Eclair or Froyo) or downgrading (from ICS, JBean or KK) to Gingerbread (Stock ROM)Included a kernel for Root and CWM (ClockWorkMod), needed for upgrading to ICS, Jelly Bean or Kit kat ROM's
This is a LIFE Saver ROM for your i9000, Flash this whenever you have a problem with your Phone or just to downgrade from any Custom ROM when you want to switch to another.
General advice prior to Flashing any phone
Its always best to do a "clean" install. meaning you should remove any old scripts, data, cache, junk before flashing a new ROM, this is like taking a bath before using new clothes. For some models it is a must do, for others it may not be a major problem or can be resolved by flashing the dbdata.rfs to clear out the remaining junk that you failed to remove before flashing . But if you had "lagfix" and did not undo it, it can cause internal SD card unavailable situation, which can be difficult to resolve.
Hence before flashing its advisable to
a) undo lagfix IF you had any.
b) Do a factory reset by settings>Privacy> factory reset ( erase SD Card - optional , as formatting SD card could be too) If you format SD card, save your Pictures and Music etc to PC first.
c) And even going into recovery to wipe everything is also good.
d) Removing SIM Card and External SD card ( makes it easier for phone to boot up initially after flashing a new ROM)
Doing this will give you a "CLEAN" install or fresh start for your phone,
IF you want to have it "AS IS" install, with all the stuff (with junk) in the SD card, you can do so too ( without formatting SD card) .
Video guide for first time ODin3 users "How to use Odin"
Downloads needed for undermentioned process
Use Odin3 Version 1.7 to 1.83 ( meant for Galaxy S1 series (attached below)
Attached below 3 i9000 PIT files ( use 512 only for re-partition ) or 512 PIT
i9000 JVU ROM with i9000 JVU CF ROOT Kernel download and unzip
FIRST ensure your phone (i9000) has more than 80% battery charge before attempting to Flash.
Procedure:
1. Fire up Odin3 on your PC and ensure KIES is not running on your PC by killing (Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe) using Task Manager
2. Put the phone to the Download Mode by pressing (VolumeDown+Home+Power) buttons and connect the phone to your PC (your phone should be recognized)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
6. Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
7. Press the Start button Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
After which you repeat steps one and two (to flash the kernel for root and CWM recovery)
3. now select PDA > CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS
4. press Start Button. Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
That's it, now you have a perfect Phone, rooted and having CWM recovery, ideal starting point for upgrading to ICS and after that to Jelly Bean custom ROM's
Any problems you may have after doing this, just look here for the solution to that particular problem.
As explained earlier (about clean flashing) if your phone reboots into recovery with some errors appearing in red after flashing the JVU ROM
it may be resolved by flashing dbdata.rfs (attached below) as PDA in Odin3 to remove the junk data files.Using Heimdall to flash
You can do the same process using heimdall instead of Odin3 too, to use heimdall one click you can download i9000 Rescue kit and flash. or use [GUIDE] Flashing with Heimdall
or using Heimdall on a linux machine
Upgrading to ICS
First and foremost, the moment you want to Flash, the rule of the thump is you should have a EFS folder backed-up somewhere else ( external SD card or PC or cloud) How, Look here. And your Battery must have more than 50% charge
Second you should do a Nandroid Backup of your Gingerbread ROM, using the CWM recovery, this will help you solve problems, IF any thing goes wrong in the future.
Every developer has instructions as to how you should flash that ROM, in the thread you are downloading their ROM's, so you only need to follow it to acheive your goal
Download:-
you can choose the ICS ROM here or search XDA and use the guide in the developers thread of that ROM
Basic CWM Flashing Procedure
No need to read if you know how to use CWM flashing procedure
From here on you won't be using Odin3 to flash anymore, you will use the CWM Recovery by using the 3 combo keys to enter recovery or you can use apps from Google Play like Mobile Odin, Flash Gordon or Flashify to Flash direct from your SD cards, so First you need to download the ROM of your choosing into your SD card ( Internal or External) together with gapps for it.
1) After flashing recovery with Odin, You can enter " Recovery Mode" by press VolumeupKey+PowerKey+HomeKey. You do this every-time you want to switch to a JellyBean or iCS ROM or to utilize the many features this recovery has, like Backup/restore/fix permissions and mostly to do the full wipes (NEEDED to be done every time you want to SWITCH ROMS) etc
2) Once in CWM Recovery you do the Full wipes (use your volume keys to move up or down in the recovery menu to select and the power key to execute that command).
The undermentioned wipes need to be done and will constitute a FULL Wipe of your Phone but your SD card will not be fully formatted as such your Images and other non system files will remain as is.
a) Wipe data / Factory reset
b) Wipe cache
c) Enter advanced and wipe dalvic Cache
Once the full wipes are done,
3) You now choose the ROM you placed in your SD card by selecting "Install zip from sdcard"
which will lead you to "choose zip from sdcard", which will take you to all the folders you have on your SD Card..scroll down to where you placed the downloaded files and select it
Once selected the ROM will be Flashed on to your phone, so wait till it says "install completed"
Note:- Some ICS ROM's may need to be flashed twice as it will end-up in bootloop in the first flash
some need to be wiped again after flashing ICS, as certain apps may not work.*
so repeat the ROM flashing one more time
Also if you intent to upgrade to JellyBean after this, you don't have to flash Gapps here , so you can skip the next step and just "Reboot System" after this
Now you do the same selection process again (Step 3) to select the Gapps file and wait till it says "Install completed"
4) That's it, Now select "Reboot system Now"
undermentioned is an example that you can useFrom Pawitp [4.0.4][IMM76I] CyanogenMod 9 for Samsung Galaxy S
Downloads
CM 9.1 Stable : http://get.cm/get/jenkins/7080/cm-9.1.0-galaxysmtd.zip
Google Apps: http://goo.im/gapps/gapps-ics-20120429-signed.zip or select http://goo-inside.me/gapps/
Installation
- First time flashing ICS to your Galaxy S (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
WIPE again or Calendar Sync will not work.
- Upgrading from CM7?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM9 (or teamhacksung) Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: The upgrade process from CM7 to ICS is automatic, but downgrading from ICS to CM7 (or restoring Nandroid) requires flashing twice. Once from ICS and again from CM7's recovery.
Click to expand...
Click to collapse
Now the ROM has been installed on your phone, so let it boot up and you can repeat this procedure to switch again and again till you have the best ROM of your choosing.
In the event that it fails to boot-up because you placed a wrong ROM that caused a boot loop or due to any other problem, just look in My Android Solutions about that particular problem. IF you cannot enter Recovery mode to flash another ROM.
Similarly You can also use Odin3 to Flash a Gingerbread ROM in Download mode and use your backup to return your phone to its original state.
Click to expand...
Click to collapse
Upgrading to Jelly Bean
First and foremost, the moment you want to Flash, the rule of the thump is you should have a EFS folder backed-up somewhere else ( external SD card or PC or cloud) How, Look here. And your Battery must have more than 50% charge
Second you should do a Nandroid Backup of your ICS ROM, using the CWM recovery, this will help you solve problems, IF any thing goes wrong in the future and you want to return to ICS.
Now make your choice as to which Jelly Bean ROM you wish to use and download that ROM and Gapps (both in .zip format) to your Internal SD card. you can chose Stable ROMs like this or some others. And Flashing them would be just the same as you did for ICS upgrade using CWM
Download:-
you can choose the Jelly Bean ROM here or search XDA and use the guide in the developers thread of that ROM
Basic CWM Flashing Procedure
No need to read if you know how to use CWM flashing procedure
From here on you will use the CWM Recovery by using the 3 combo keys to enter recovery or you can use apps from Google Play like Mobile Odin, Flash Gordon or Flashify to Flash direct from your SD cards, so First you need to download the ROM of your choosing into your SD card ( Internal or External) together with gapps for it.
1) Coming from ICS, You can enter " CWM Recovery Mode" by press VolumeupKey+PowerKey+HomeKey. You do this every-time you want to switch to a JellyBean or iCS ROM or to utilize the many features this recovery has, like Backup/restore/fix permissions and mostly to do the full wipes (NEEDED to be done every time you want to SWITCH ROMS) etc
2) Once in CWM Recovery you do the Full wipes (use your volume keys to move up or down in the recovery menu to select and the power key to execute that command).
The undermentioned wipes need to be done and will constitute a FULL Wipe of your Phone but your SD card will not be fully formatted as such your Images and other non system files will remain as is.
a) Wipe data / Factory reset
b) Wipe cache
c) Enter advanced and wipe dalvic Cache
Once the full wipes are done,
3) You now choose the ROM you placed in your SD card by selecting "Install zip from sdcard"
which will lead you to "choose zip from sdcard", which will take you to all the folders you have on your SD Card..scroll down to where you placed the downloaded files and select it
Once selected the ROM will be Flashed on to your phone, so wait till it says "install completed" Now you do the same selection process again (Step 3) to select the Gapps file and wait till it says "Install completed"
4) That's it, Now select "Reboot system Now"
undermentioned is an example that you can useFrom Pawitp [4.2.2] CyanogenMod 10.1 for Samsung Galaxy S
Downloads
Latest build: http://get.cm/get/jenkins/32365/cm-10.1.0-galaxysmtd.zip
Google Apps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Installation
- First time flashing CM10.1 to your Galaxy S (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10/CM10.1 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: The partition layout of CM10.1 is identical to that of CM10 and thus you may use CWM to backup/restore.
Click to expand...
Click to collapse
Now the ROM has been installed on your phone, so let it boot up and you can repeat this procedure to switch again and again till you have the best ROM of your choosing.
In the event that it fails to boot-up because you placed a wrong ROM that caused a boot loop, or your lost your IMEI or network or due to any other problem, just look in My Android Solutions about that particular problem. IF you cannot enter Recovery mode to flash another ROM.
Similarly You can also use Odin3 to Flash a Gingerbread ROM in Download mode and use your backup to return your phone to its original state.
Click to expand...
Click to collapse
Upgrading to Kit Kat
Continued below
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Unbricking the i9000
Upgrading to Kit Kat
First and foremost, the moment you want to Flash, the rule of the thump is you should have a EFS folder backed-up somewhere else ( external SD card or PC or cloud) How, Look here. And your Battery must have more than 50% charge check battery as mentioned on top using your dialer
Second you should do a Nandroid Backup of your Jelly Bean ROM, using the CWM recovery, this will help you solve problems, IF any thing goes wrong in the future and you want to return to Jelly Bean.
Now make your choice as to which Kit Kat ROM you wish to use and download that ROM and Gapps (both in .zip format) to your Internal SD card.
Downloads:-
ROM's:-
1) Omni ROM 4.4 Kit Kat
2) Mackay ROM 4.4
3) Unofficial CM 11
4) CyanAOSP KK4.4 v1.0.0 For gaming...stable
5) C-RoM -4.4- -ALPHA-2
Kit Kat ROM's are still in ALPHA stage as such will have unresolved problems and bugs.
Look here for Discussions/reviews and FAQ about Kit Kat as well as other i9000 Kit Kat ROM's
Kitkat 4.4 Kernels
Semaphore 3.4.0
Mackay kernel 0.603
Cyancore 3.5.0
Stock CM11 kernel + Linaro 4.8 and Mackay TWRP
undermentioned is an example that you can use
From Pawitp Unofficial CM 11 CyanogenMod 11 for Samsung Galaxy S
Downloads
Latest build: http://d-h.st/users/pawitp?fld_id=28174
Google Apps: http://d-h.st/users/dhacker29?fld_id=27426
Installation
- First time flashing CM11 to your Galaxy S (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM10/10.1?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
You will finally see a "set_metadata_recursive" status 7 error. That is normal.
Reboot back into recovery (the reboot is required)
Install the ROM again from internal sdcard using ClockworkMod Recovery
Optionally restore /data from Nandroid Backup (the update will wipe your /data)
Optionally install the Google Addon
- Upgrading from CM10.2?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another build of CM11?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Warning: You may get set_metadata_recursive related-errors during install if you're using a custom kernel without SELinux support. In that case, revert to the stock kernel before continuing or follow the instruction for upgrading from CM10.1.
Note: The partition layout of CM11 is the same as CM10.2.
Unbricking the i9000
If you are unable to enter download or recovery mode use this guide or this tool or i9000 Easy Reboot Recovery using ADB to get recovery modeIf you have USB connection problems use this guide Unbricking the i9000 can be easily achieved by flashing any of these Rescue kits
Rescue Packages
i9000 Rescue EzBase Rescue and Recovery by nitr8 Full Graphical HOW To and Tutorial download
i9000 Rescue EzBase Rescue with CF Root & semaphore root by nitr8 & chainfire, repacked by slaphead20
i9000 Rescue Rescue Kit for i9000 using heimdall packed by ldq
i9000 Rescue GB Flash Kit packed by psyqiq
i9000 Rescue Darky's ROM Resurrection edition, Guide , Mirror download or here
or any of these ROM's
Upgrade or Downgrade i9000 Stock ROM's (Firmware)
i9000 upgrade or downgrade without changing ROM Ezboot
i9000 Upgrade or Downgrade to GingerBread 2.3.6 ROM JVU + Root with a 512 Pit File (repartition Ticked) Ideal base for upgrading to ICS and J.Bean
i9000 [Deodexed Firmware] Stock XXJVU, Flashed using CWM , zip-aligned and root
i9000 [Deodexed Firmware] Stock XXJVU Flashed using Odin3
i9000 Downgrade to GingerBread 2.3.5 JVT
i9000 Downgrade to Froyo 2.2 JPU
i9000 Downgrade to Eclair 2.1 JM1 Initial Stock ROM, without Combo key functions, use KIES or ADB or JIG for upgrades, Included flash-able FIX for Combo Keys. Eclair XWJM2 - Eclair XWJM3But it may not work on some phones, so we need to flash various other files to solve them (undermentioned files are for JVU ROM)
B+ SBL (primary and secondary Bootloaders is meant for restoring Recovery and download combo buttons as well as boot loader problems, should be flashed as " PDA " with update Phone Boot Loader ticked in Odin3
Param is used for restoring Boot animation, stuck problems, flashed as PDA using Obin3
Cache is for clearing cache flashed as PDA using Odin3
dbdata.rfsis for clearing data flashed as PDA using Odin3
other files that can be used
i9000 2e Recovery
i9000 CWM
Check this out! Links to useful Guides and " Banned " Documentaries
i9000 Android Firmware (Stock)
Here | Here | Torrents Here | Deodexed Firmware Herei9000 Custom ROM's Here
i9000 Kit Kat ROM's
What you might want to know and should know about Kit Kat 4.4
4.4 Kit Kat: Everything You Need to Know & Here or Developers website
Current Developement
[FAQ][Discussion][Reviews] Kit Kat 4.4 / CM 11 for Galaxy S & S Plus [i9000][i9001]
Check this out! Links to useful Guides and " Banned " Documentaries
I have been looking after the pit file for so long.
Nice guide! Thanks
Amazing guide, @xsenman
Brilliant, as always! Highest compliments
Noob friendly guide...thanks for helping a noob at galaxy s1 family(me)
Sent from my GT-I9000 using xda app-developers app
helpfull
Boot menu formatted
Dear,:crying:
please please please help me dude...am in a big tension..
my phone is galaxy s GT-i9000 and the os was cyanogen 9...
but before some day it become stuck and when i put it for reboot it shows only loading screen and nothing else ...i tried many things like removing battery ext.sd and all but no hope ..
so at last i entered into CWM and mistakenly formatted the boot :crying::crying::crying::crying::crying:....but after that i cannot able enter into even CWM.....
but i can get into download mode and nothing else ...
please dude help me what i can do ?? ...and what i want to do..??
and also i didn't made any backup of my contact,message,photos,videos etc....
shall i loss all the things???:crying:
please help me
thanks in advance
johnk kennedy said:
but i can get into download mode and nothing else ...
please dude help me what i can do ?? ...and what i want to do..??
and also i didn't made any backup of my contact,message,photos,videos etc....
shall i loss all the things???:crying:
Click to expand...
Click to collapse
Don't panic, you are still in solid ground and can recover from this, but you may have to lose your contacts, data etc as flashing a new gingerbread ROM, would be the obvious solution. But your photos and videos would still be there, as long as you have NOT formatted the SD card too. On the other hand IF you had google gmail account, it would have backed up your contacts detail, when the sync was ON.
Actually, this thread would have solved your problem already, either you flash the gingerbread upgrade or downgrade JVU ROM as guided or you flash the rescue kit ( which is also the same) in the unbricking section. , This ROM has the bootloader in it so you would not have an issue about it.
Note:- it is possible to use ADB to recover the data and contacts, if you have recovery mode (which you indicate is not having) its also possible to use ADB to boot into recovery, only possible when your have debugging ticked in your device.
SO take a moment to think things overs as to what you want to do, so flash the gingerbread ( sure to recover) or try to recover the data? ( no guarantees though.)
Check this out! Links to useful Guides and " Banned " Documentaries
Amazing guide
ok dude.first of all thanks for giving me such a confidence:highfive::good: .......
Then if i will not loose images and videos and all.....and in case of contact there is a possibility of sync...
then i think its better to do it ...
so please can you explain me what are the steps that i should do ....
please describe me step by step please .......
---------- Post added at 08:41 PM ---------- Previous post was at 08:27 PM ----------
"""""SO take a moment to think things overs as to what you want to do, so flash the gingerbread ( sure to recover) or try to recover the data? ( no guarantees though."""""
I mean please tell which will be the best ROM for my device ...I really loved the previous (Cyanogen 9) ROM...
so please refer me a best ROM,,,
johnk kennedy said:
I mean please tell which will be the best ROM for my device ...I really loved the previous (Cyanogen 9) ROM...so please refer me a best ROM,,,
Click to expand...
Click to collapse
First and foremost, you need to flash the gingerbread ROM to solve your problem and get your phone booting, only after that you should look at CM, 9, 10 or 11. BTW there is no such thing as best ROM, that why you need to read the guide on "unsure which ROM yo chose" to get abetter idea about ROM's
Everything you need to do , has been explained step by step, in the 1st post of this thread, so READ, read and read again , once you understand it all, proceed to do it, step by step
Check this out! Links to useful Guides and " Banned " Documentaries
ok dude ...got it but.....can you please give me link to download XXJW4 to install it using odin...
as you said i red all the giud and got one link...but its from the site "hotfile" but it is banned now ...i cannot able download the file ...please give me another link if you can ..
johnk kennedy said:
ok dude ...got it but.....can you please give me link to download XXJW4 to install it using odin...
as you said i red all the giud and got one link...but its from the site "hotfile" but it is banned now ...i cannot able download the file ...please give me another link if you can ..
Click to expand...
Click to collapse
For all downloads, look in MY Android Collections, link below, you can download from here
chose according to region or use JW9 withthe modem for your country, would work just fine.
Check this out! Links to useful Guides and " Banned " Documentaries
johnk kennedy said:
.....can you please give me link to download XXJW4 to install it using odin......please give me another link if you can ..
Click to expand...
Click to collapse
You can download it from sammobile.com under firmware, just sign up
sent from N7100 & CM10.2 & Devil2 kernel v2.1.2
great work
I cannot Flash any roms on my SGS.
GUYS, HELP!
I cannot flash any roms on my SGS, I tried flashing a rom using CWM but the installation is always aborted. I've done this several time but the same thing just happens. I also tried using Odin but, Odin cannot read my Phone.
I'm currently on GAMERZ rom and I want to flash 4.4 Kitkat. Now, I don't have any idea on how will I flash any roms on my device.
PLEASE HELP ME ON THIS! THANKS!
mriamniks said:
GUYS, HELP!
Click to expand...
Click to collapse
How do you expect anyone to read this??, change your font size, so that we can read and help you.
After reading what you had to say, the details are all in the first post, you only need to read, read and read again, as all the remedies are mentioned in the 1st post of this thread.
Check this out! Links to useful Guides and " Banned " Documentaries
how to root Build number DDJVB Gingerbread 2.3.6
Firoz24 said:
how to root Build number DDJVB Gingerbread 2.3.6
Click to expand...
Click to collapse
you can use framaroot app for root only , or semaphore gingerbread kernel for root & CWM
Check this out! Links to useful Guides and " Banned " Documentaries
Hy,
I have two i9505, I read a lot and installed CWM using Heimdall, I flashed SuperSU to gain root, and made a backup. It labeled the backup with an outdated 1970 name...
I took the SD card out to copy the SD backup, but could find it even when searching for hidden folder.
I put back the SD card in my device, and booted to CWM, the backup was available for a restore process. So before trying any flash I tried out a restore process, but ended up with a stuck in boot. Boot to CWM and bootloader being still available, I managed to flash a workable ROM, but I can't restore to my initial ROM.
Now, I'd like to be able to restore my device to it's initial ROM.
I believe that somehow, the backup I made is corrupted.
As I have another identical i9505 I haven't tempered with yet, I guess I could install CWM (or other custom recovery) to make a backup of the ROM, extract the backup of the ROM from the SD and use it to 'clone' my second device ROM to this one.
But I don't wan't to make any mistake here, so I'd apreciate some help, first to understand where CWM put the backup .tar.
Another solution is to get some stock ROM I can flash. As anyway I don't have any warranty on the device I don't care to restore to exact initial state, I just want to be able to get back to some stock ROM.
sammobile.com/firmwares is the place to go if you want a stock ROM. Download whichever ROM you want, then use Heimdall to flash it, and you should then be returned to stock. For best results, the ROM you download should have no carrier branding, but any of them should work.
I though I would have to do something like that from reading the unroot guide. Also, as I use Heimdall to flash (I have a linuxBox), I will use this guide in french as a guideline.
I noticed that the command line they recommend don't flash sbl1. I don't know if it is required.
Thank you anyway for confirming that.