Database Users

[Q] Soft Bricked Galaxy S5

Hello,
I've got (had) an SM-G900W8 running the XtreStoLite v2.0 LP BETA5 ROM on the XXU1BOA3 kernel. I installed TWRP 2.7 via Odin, and left the latest modem and bootloader updates I got through KIES3.
At which point I got the chance to sell the handset on Kijiji, provided I could get the stock ROM back on.
I downloaded the latest Odin (3.09) and the correct Firmware for my handset from sam mobile, and factory reset the device. I pulled the battery, let it sit, and tried to flash once I got it back up in download mode, and it wouldn't work.
This isn't too much of a surprise to me, because since I flashed TWRP, Odin hasn't ever worked for me. Regardless of how many times I've tried to flash the modem and/or BL that XtreStoLite asked me to use in their how to thread, it wouldn't work. I was willing to ignore it b/c the ROM worked with the modem and BL it was running.
My problem is that once I tried to reboot, the system hung at the BL animation. I went back into recovery, and tried to move my backups off my external storage (I had 2 back ups that were about 2 or 3 gigs each, too much for the local storage) to the local card and restore (b/c TWRP won't restore from the external card) and the back ups failed.
Now I've got the BL screen, but it won't advance to the animation, and it won't boot to TWRP either.
I tried to restore from KEIS, but it says my device isn't supported by KIES 3 (it is). I could really use a hand here. Every time I try something this gets worse. I'm no pro, but I've had no problem figuring this out on my old HTC handsets.

Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck

[Q] Phone wouldn't connect to WiFi with Stock Rom & won't play any SOUND OR MEDIA

I've spent a lot of time now trying to fix my phone and i'm really quite worried.
It's a Samsung Galaxy S4 SGH-I337M (CSC I337MOYAAAMDJ, Baseband I337MVLUAMDJ, version 4.2.2).
I have had CM 10 on it running perfectly fine for about a year. I decided to update it though and didn't know that you could update CM right from the phone , so I downloaded the software from their site onto my phone and onto my PC. Followed the instructions installation froze and didn't move forward for over a day .... so I gave up.
I went looking for and downloaded the phone's stock firmware for both my carrier (Virgin Mobile, Canada) and for Bell's, so I installed TWRP with Odin 3.07 without issue. When I install the stock firmware my WiFi will not turn on.
So i've tried installing several rom's putting them on the SD card and using TWRP on my phone and i've found out that if I use Goldeneye and tell it my phone is an I9505, or hyperdrive (I9505) or at the moment Google Play Edition (JFLTE 5.01, kernel = Googy-Max3) that the WiFI DOES TURN ON as soon as the rom is loaded !!! So I thought I was good, but no
When flashed with either it's stock I337M firmware or these custom I9505 rom's my phone will play no audio. Chrome just crashes if I go to play any music or video. If someone call's, the ringer doesn't work but after several 'rings' my phone start's to vibrate indicating they called (aka the dialer lags out and then crashes). I can make calls too but when I talk the recipient can't hear me, nor I them.
It downloaded and re-installed all the app's of my google backup totally fine and using wi-fi. It play's games fine (but with no sound), i can txt fine, etc. It notices and connects to the network (Virgin Mobile) fine (I turned off wifi and tried downloaded stuff, txts go back and forth, and my phone labels Virgin)
I'm on a stupid 2 year contract and this phone cost $650 at the time I got it. It's knox 0x1 so no warranty to have it repaired. Does ANYONE have ANY idea what might be causing my phone not to play any sound's? I've tried pretty much everything I can think of.
I'd be willing to live with a totally cripples phone ... but it's got to at least work for receiving or sending phone calls and this sound issue crashes the dialer and even if I manage to pickup when it's vibrating before the other person has hung up there's no sound, neither of us can hear each other .
Does ANYONE have ANY idea what could be doing this or how to fix it? I'm so depressed and worried right now that I just a phone I spent a lot of money and am on a stupid contract on :/. I fixed the wifi problem by flashing with a rom that 'makes it' a GT-I9505G, baseband I337MUMUAMDL (v 5.0.1) (vs SGH-I337M, baseband I337MVLUAMDJ (v 4.2.2)), but the same sound and audio/media problem exist's no matter what firmware or version the phone ends up being .
I should have just left it with CM as it was but *sigh* here I am, please help.

masterof1010 said:
I've spent a lot of time now trying to fix my phone and i'm really quite worried.
It's a Samsung Galaxy S4 SGH-I337M (CSC I337MOYAAAMDJ, Baseband I337MVLUAMDJ, version 4.2.2).
I have had CM 10 on it running perfectly fine for about a year. I decided to update it though and didn't know that you could update CM right from the phone , so I downloaded the software from their site onto my phone and onto my PC. Followed the instructions installation froze and didn't move forward for over a day .... so I gave up.
I went looking for and downloaded the phone's stock firmware for both my carrier (Virgin Mobile, Canada) and for Bell's, so I installed TWRP with Odin 3.07 without issue. When I install the stock firmware my WiFi will not turn on.
So i've tried installing several rom's putting them on the SD card and using TWRP on my phone and i've found out that if I use Goldeneye and tell it my phone is an I9505, or hyperdrive (I9505) or at the moment Google Play Edition (JFLTE 5.01, kernel = Googy-Max3) that the WiFI DOES TURN ON as soon as the rom is loaded !!! So I thought I was good, but no
When flashed with either it's stock I337M firmware or these custom I9505 rom's my phone will play no audio. Chrome just crashes if I go to play any music or video. If someone call's, the ringer doesn't work but after several 'rings' my phone start's to vibrate indicating they called (aka the dialer lags out and then crashes). I can make calls too but when I talk the recipient can't hear me, nor I them.
It downloaded and re-installed all the app's of my google backup totally fine and using wi-fi. It play's games fine (but with no sound), i can txt fine, etc. It notices and connects to the network (Virgin Mobile) fine (I turned off wifi and tried downloaded stuff, txts go back and forth, and my phone labels Virgin)
I'm on a stupid 2 year contract and this phone cost $650 at the time I got it. It's knox 0x1 so no warranty to have it repaired. Does ANYONE have ANY idea what might be causing my phone not to play any sound's? I've tried pretty much everything I can think of.
I'd be willing to live with a totally cripples phone ... but it's got to at least work for receiving or sending phone calls and this sound issue crashes the dialer and even if I manage to pickup when it's vibrating before the other person has hung up there's no sound, neither of us can hear each other .
Does ANYONE have ANY idea what could be doing this or how to fix it? I'm so depressed and worried right now that I just a phone I spent a lot of money and am on a stupid contract on :/. I fixed the wifi problem by flashing with a rom that 'makes it' a GT-I9505G, baseband I337MUMUAMDL (v 5.0.1) (vs SGH-I337M, baseband I337MVLUAMDJ (v 4.2.2)), but the same sound and audio/media problem exist's no matter what firmware or version the phone ends up being .
I should have just left it with CM as it was but *sigh* here I am, please help.
Click to expand...
Click to collapse
try with this firmware
lets me see

k thanks i'll try it (once it's slow download is done) and update this post. Looks the same except I guess it's android v5.0.1 (well and it's a different CSC/PDA).
K well i've tried that firmware and it's given me some abnormal problems.
Odin typically just writes in like two minutes and boom done, but when I tried to flash with the firmware you suggested like every 15 seconds it would say ...
"Receive Response from boot -loader"
"Transmission Complete.."
"Now Writing .. Please wait about 2 minutes"
It kept cycling through those 3 messages until it FINALLY finished and it say's PASS but it took 9 min 53 seconds which is like 5 times longer then it's ever taken.
Wheather this is relevant or not i'm not sure just trying to give as much details as I can.
Anyways, after booting the phone the samsung logo came up as usual and usually it takes like 5-10 min sitting at this logo before the phone completes loading, presumably setting up the firmware I imagine.
It's been now sitting at that logo for over 20 minutes and i'm about to try wiping with TWRP the davlic cache/cache/data/internal and either trying again with odin (v3.07) OR
If that contines to not work I might put the tar.md5 on the external SD card and recover a saved backup I have on the SD card (with the stock firmware I had before that doesn't allow Wi-Fi to be enabled nor audio/media to play) and use Mobile Odin Pro .apk (I paid for the pro version) from within that restored recovery to flash the firmware you suggested to my phone again.
This is probably redundant but I just figure I might as well try absolutely everything I can possibly think of with your firmware.
If you have any idea why I might be experiencing these abnormal Odin flashing and/or initial loading conditions of the firmware you (or anybody ) suggested i'd appreciate any advice you can give.
I'm going to try and reflash with Odin on my PC again right now (i'm certain thing's like the USB cable are fine and my PC and phone can transfer data without issue .. but that's why i'm going to try mobile odin if after this next attempt doesn't work either).
I'll keep the thread updated, any and all advice is welcomed and highly appreciated
EDIT: OMG it made a like startup theme sound ... that's the first time it's outputted sound in 3 day's !!! It's at the Samsung screen loading the newly flashed firmware so hopefully that completes because wow my phone made noise finally !! Now to wait, and wait....

It won't go past the Samsung logo. So I guess i'll try Mobile Odin. I don't have much faith but it's worth trying.
Uh the backup of the stock firmware I made won't load ... but the hyperdrive rom did. Sound and the dialer work perfectly fine in this rom now, so I guess thing's are more or less fixed. Even though i've wiped the cache/davlic/internal/data in order to prepare to flash the other firmware or this hyperdrive rom (I wipe it every time) in this rom it's reporting my phone's baseband to be I337MVLUGOC4 which is that of the firmware you suggested ...
I'd still rather not use this rom, I thought it was ok at first but meh i'm going to try to go back to CM (after all this *rolls eyes*), trying to use Mobile Odin to install the firmware that you recommended and that appears to have ... somehow fixed the sound can't detect the model of my phone and is dumping, this is not something that has happened with the app before so I don't think i'll be flashing the firmware you suggested.
If it did something to globally fix the crashing when an app was instructed to play audio as it appears to have I guess i'm going to just go download the full CM now, put it on the SD card and install it with TWRP.
So uh, not 100% there yet but it does appear what you've suggested has solved my problem (because worst case scenario i'll just be stuck with the Hyperdrive rom ... but i'll have a working phone) so thanks so much bud I was quite upset and worried about what I was going to do still paying off a useless phone on a contract i'm stuck with for another year still.
I suppose there's no real need in continuing to update this thread as it appears my problems are solved and all that's left are things i'm doing not to fix anything but just because of personal preference over what rom to use but if you want to know anything more just ask, otherwise thank you so much you saved my ass and i'm very grateful.

No cellular network after installing CM12.1 on Straight Talk SM-G900F (klte)

I recently installed TWRP and then the latest snapshot of CM12.1 for my phone described in title. The android version was upgraded from KitKat (4.4 I believe) to 5.1.1. Everything works fine with the install except I have no network whatsoever. Can't text, can't call, can't use data etc. I made a post on the CM subreddit but didnt get a lot of help (can't post link) . Here is what I have tried: changing APN settings (which I have heard should at least let me call and text if incorrect); flashing various modems such as BOE3, BNL9, and BOD3 (all of them get a FAIL! (auth) in ODIN); restoring my KitKat backup (makes the phone unusable); trying to flash the default L rom for the phone (Also fail to flash in ODIN and TWRP). So at the current time I am basically stuck on CM12.1 and all of its amazingness with no phone functions, I basically have a small tablet at the moment lol.
Here is some information from the about of my phone, if it is helpful at all.
Model: SM-G900F
CM Version: 12.1-20151204-NIGHTLY-ktle (Installed the nightly after the snapshot didn't work, same problem persists)
Android version: 5.1.1
Baseband version: S902LUDU3AOG2
Carrier: Straight Talk
If any more info is needed, just let me know. I appreciate any help, as I am pretty much at square one still. I have googled for days to try to fix this, and haven't come up with anything. It seems no one has had this specific problem before.
If I can't fix this issue, is there any way I can downgrade back to what I had to begin with?

y tried with another sim card !!!
ty *#06# to verify imei

popmpopm said:
y tried with another sim card !!!
ty *#06# to verify imei
Click to expand...
Click to collapse
I only have one other sim card on me, and its through verizon. It didn't work on the phone either. I would definitely just buy a new sim card if that would mean it would work. The whole IMEI thing worked, but I am not sure what to do with that information.

(Definitely a G900F? Check what it says in download mode)
Checking the IMEI was to make sure you haven't wiped/corrupted the EFS partition, which contains the Radios needed to make and receive called, along with the IMEI (Hopefully you researched enough to back that up before messing with the phone)
Try flashing another stock ROM with ODIN 3.10.7, go for a different Lollipop ROM from sammobile. com
Some stock ROMs fail to flash, some work, (Phone dependant it seems)
Then boot into recovery and factory reset > try to boot

*Detection* said:
(Definitely a G900F? Check what it says in download mode)
Checking the IMEI was to make sure you haven't wiped/corrupted the EFS partition, which contains the Radios needed to make and receive called, along with the IMEI (Hopefully you researched enough to back that up before messing with the phone)
Try flashing another stock ROM with ODIN 3.10.7, go for a different Lollipop ROM from sammobile. com
Some stock ROMs fail to flash, some work, (Phone dependant it seems)
Then boot into recovery and factory reset > try to boot
Click to expand...
Click to collapse
I have tried 2 separate L roms for the G900F. It says in download mode the phone is a SM-S902L and I read somewhere to get the true model of the phone you look at the FCC id under the battery. Well the FCC id says it is a G900V. at one point in trying to fix it, I tried a stock L rom for the G900V and TWRP told me that it was intended for a kltevzw device and that mine is a klte, so that is why I assume that it is in fact a G900F. I have been using ODIN 3.10.7 to flash everything as well. (Have't tried TWRP for the most recent tries since it takes longer to setup and I doubt it would work but it's worth a try I suppose.
I looked on Sam Mobile for the SM-S902L and there is only one firmware for it, which is 4.4.2, the same one it was installed with when I got it. From my understanding SM-902L is the straight talk branding of the G900V, and trying to flash that firmware didn't work either. Every time I try to flash something it terminates with a FAIL! (auth). What I also understand is that Straight Talk has not released an official version of L for the phone. So it seems my options now are to somehow get the modem to work right in CM12, try to somehow downgrade to 4.4.2, or wait for Straight Talk to release an update for my phone which is not really an option. I just got this phone and I really don't want to have to buy a whole new one just because of software problems. In my mind there HAS to be some way to fix this.
EDIT: my bad, I should have mentioned when I tried to flash the G900V rom it was also CM12, not a stock.
EDIT AGAIN: I seem to have fixed this problem. I have no idea how I did it, but I finally got it to restore to the stock 4.4.2 rom. I seriously have no clue how it worked but it did. Texting and data once again work, but i am now having a problem where I can't make or receive calls. Call immediately ends/goes straight to voicemail. I don't suppose you know anything about that, if you do that would be awesome. I'm gonna call ST in the morning and see if they can tell me anything from their end. But otherwise, I guess my problem is solved. Lol.

I know it sounds simple or may sound stupid but have you tried entering your APN? I have to do that with most of the custom Roms I flash or I won't have service. Also, make sure the correct modem is flashed and up to date.

S4 i337M - No sound on calls (in/out) after flashing Stock 5.01 Loliipop ROM

Flashed stock 5.01 ROM and phone call function stopped working.
When calling, there is a connection but no sound can be heard on either end of call.
It WAS working briefly and briefly managed to 'fix' it. Everything else functions correctly. Wifi calling works perfect. SMS works perfect.
I have searched forums and Googled this (about 9 hours worth so today) so quite at a loss how to proceed.
Tried forums suggestions to:
- disable Google Now/OK Google voice functions
- disable S Voice functions
- removing and replacing SIM/SD card
- wiping cache
- air dusting earphone port
- clear Google Play services cache and data
- clear Drive cache
- boot into Safe Mode, still not working
Additionally tried re-wipe cache/DALVIK/data/entire device and re-installed different stock ROM, same problem
I flashed both BELL and Rogers stock Lollipop ROM from XDA post (http://forum.xda-developers.com/galaxy-s4-att/general/sgh-i337m-canadian-stock-official-t3082758) via Odin
Any suggestions???
The only thing that worked briefly was:
In App Info for the Phone App, I did 'clear data' and 'clear cache' for all THREE Phone Apps (yes, there are three, I don't know if this is normal or not as this is first time with Lollipop). This allowed the phone to work BRIEFLY, then problem returned.

Try flashing the latest stock from sammobile.com.

Hi,
Attempting this but both Bell and Rogers Lollipop firmware .ZIP are corrupt from Sammobile.com I've contacted their admin to advise of this as I have tried downloading multiple times with the same corrupt file result.
Are there any other reputable download site?
audit13 said:
Try flashing the latest stock from sammobile.com.
Click to expand...
Click to collapse

I did a nandroid / efs backup with TWRP. Would there be any problems in restoring to 4.4.2 Kitkat using that???
audit13 said:
Try flashing the latest stock from sammobile.com.
Click to expand...
Click to collapse

Anything to be concerned about reverting via TWRP to Kitkat
Tried Emergency Firmware recovery via KIES, no luck, re-wiped cache, did factory reset in stock recovery, still no good.
Tried swapping Sim card tray and Earphone port (had a parts phone kicking around that is stuck on boot logo ((TWRP/ODIN Flashing does not recover this phone sadly)))
Will try to revert to Kitkat via TWRP next.
Note: I AM able to make normal calls as long the device is connected via Bluetooth to my car or to my bluetooth headset. Discovered this after more googling/forum searching.
rogue_element said:
I did a nandroid / efs backup with TWRP. Would there be any problems in restoring to 4.4.2 Kitkat using that???
Click to expand...
Click to collapse

What are you using to download from sammobile? I always use a win 7 machine.
What are program is being used to unzip the rom? You're only unzipping once?

Hi,
I'm using Win7 x64 Home Premium. WinRAR to unzip.
Since posting last I have restored Nandroid backup - phone function still didn't work and Google Play Services glitched out.
So, next downloaded 4.4.2 Kitkat from Sammobile, extracted no problem, flashed via Odin (no errors)- still no phone function
Wiped phone yet again, re-installed Kitkat one more time with Odia (no errors) - still no phone function
Used Kies to do Firmware Update and Initialization, (no errors) - still no phone function
Re-wiped again and used Kies once more, this time not doing App Restore function in case there is App causing issues and not signing into Google or Samsung Account to avoid anything restoring - still not working but interestingly there was a OTA update to 5.01 that installed fine - end result... phone function still not working.
If anybody can offer me another suggestion to try, I'll be happy to attempt but at this point I'm prepared to say f**k it and buy another phone.
I've been at this since last Saturday.
audit13 said:
What are you using to download from sammobile? I always use a win 7 machine.
What are program is being used to unzip the rom? You're only unzipping once?
Click to expand...
Click to collapse

After flashing with Odin, are you able to confirm that the bootloader and baseband match each other and the rom that was flashed? The imei is correctly displayed?
Since you are able to make calls via Bluetooth, are you able to hear the other party and the other party can hear you? What about calls via speakerphone?

Yes, I've attached a screenshot. Bootloader and baseband do match. This last round of install was done via OTA update that popped up after installing Kitkat. I just rolled with it as I figured if it's coming from Samsung directly, why not.
When making calls via Bluetooth, there are no issues. It functions as normal. It is just through the Phone App itself.
Interestingly, I discovered I can make outbound call no problem via Google Hangouts dialer as well. This is incredibly frustrating.
audit13 said:
After flashing with Odin, are you able to confirm that the bootloader and baseband match each other and the rom that was flashed? The imei is correctly displayed?
Since you are able to make calls via Bluetooth, are you able to hear the other party and the other party can hear you? What about calls via speakerphone?
Click to expand...
Click to collapse

Did you try reflashing the OH1 ROM? Sounds redundant but I'm not sure what else to suggest short of putting the motherboard into another phone and trying it out.

Hi audit13,
Haven't tried installing mobo in another phone, will give that a whirl for sh*ts''grinz.
Been an incredibly frustrating process. Another interesting thing that has been happening is that I notice the boot up sequence takes a lot longer than I recall.
Have been trying to avoid using the phone.
Re-flashed OH1 using ODIN and earlier tonight, Kies. Still not working.
I'm wondering if doing something like reverting to very old ROM may do the trick instead.
Do you happen to know how old I can go? Jellybean? I will check sammobile and see what the oldest they have there.
Phone functions perfectly fine via Bluetooth still, IP calls via WhatsApp and Hangouts Dialer also work per normal. Just trying to place normal calls does not work.
Have also had bootloops lately too I notice.

You can go as far back as 4.4.2 from my experience.
You'r performing a factory wipe right after flashing in Odin?
Initial boot up after flashing and wiping usually takes a long time but it should become quicker as the cache builds up with each reboot.

@rogue_element have you found a solution?
My wife's phone is having the exact same problem.
It started happening like a couple months ago. Haven't flashed anything to it. It just suddenly happened.

Hi ImpheOtus,
No, I'm still searching for a solution. I tried reflashing and then factory reset per audit13 suggestions but still no luck. I even tried swapping the ear piece module from a parts phone and no go. Extremely frustrating. Shopping for a new phone at this point but I'm still trying for a resolution as I'm stubborn and don't like giving up.

Hi audit13,
I'm actually suspecting the something else at this point (virus/malware, etc.) in the bootloader or deeper. There has been other random odd behavior, and while I don't rule out something like a hardware problem either, the behavior has been very strange.
Perversely, my wife's phone briefly experienced the same issue as mine but it cleared up after a reboot.
I will go hunting for a tut on flashing bootloader and kernel only next to see if that helps. If you have any suggestions of where to look for tutorial and/or files please feel free.
I tried flashing 4.4.2 but no luck there either btw

Okay, try flashing with a pit file and the latest stock rom from sammobile.

audit13 said:
Okay, try flashing with a pit file and the latest stock rom from sammobile.
Click to expand...
Click to collapse
Any particular suggestions regarding locating/selecting a pit file?

Is your phone a 16 GB sgh-i337m from Rogers, Telus, or Bell?

audit13 said:
Is your phone a 16 GB sgh-i337m from Rogers, Telus, or Bell?
Click to expand...
Click to collapse
Its a Bell SGH-I337M 16gb phone

I attached a 16 GB pit file from my i337m.

Unable to flash stock firmware

Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed

I'm having a similar issue. This afternoon, 2 apps threw errors and closed. I rebooted, which apparently was the wrong thing to do. The reboot stalled on the AT&T logo and stayed that way for 5 min - the unit became very hot & the power button did not respond, even while holding it down. I got into recovery, cleared the cache and factory reset, then rebooted. The unit came back up and started reinstalling everything. I took it back down into the download status and attempted to reload 935x via Odin, only to stall at "initialzation" [sic] as you did. I got out of that after waiting for some sort of response. SuperSU was still in my apps as was Root Checker. Root Checker indicates the system is rooted. SuperSU indicates it needs the binary updated. BusyBox and TiBu indicate they cannot find root. I deleted all the root apps and tried reinstalling root via adb which completed successfully, but the same outcome with all the root apps. So I'm not sure if I'm still really rooted as Root Checker claims, or not.
EDIT: I just saw that I have 2 "Knox Settings" apps. Clicking on either returns, "Unfortunately, Container Agent2 has stopped."

use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.

NovaEDM™ said:
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
Click to expand...
Click to collapse
I was having the exact same problem you had with Odin. It seemed I was able to flash stock firmware using this version of Odin: http://www.mediafire.com/download/2t2sjqxtogbkafk/odin_3.12.3.rar

rob219 said:
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
Click to expand...
Click to collapse
did you have any problems with the u version of the s7 edge firmware, like the fingerprint scanner not responding? i am on that version and cant get any odin version or any version of s7 edge g935a firmware to flash, tried unrooting and was forced to use the U version of the s7 edge firmware, everything works except the fingerprint scanner, cant get back to full stock firmware, need help!

im having the exact same problem, when i put my phone into download mode and flash the stock at&t firmware, Odin get stuck in "initialization" and my phone screen displays and error message.

Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.

nicetucu said:
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
Click to expand...
Click to collapse
I used Odin_v3.12.3_Patched_SHA256 to flash the 935U Firmware then used Odin3_v3.11.2 to flash the June Firmware release.