So about a few hours ago I saw that I could download the new 10.2 cyanogenmod. I wanted it because it was Android 4.3, so I downloaded it. I tried watching flash movies and stuff, and the browsers and stuff kept crashing, and the internet didn't work completely. So, I downloaded 10.1 again, and installed it. It rebooted to the teamwin thing, and then rebooted again. A few minutes after, I was curious as to why it was still loading. Waited a long time, and it still was on the CM boot logo thing. Im using the Nexus 7 toolkit (its called something else, but im not sure what. The icon is a red toolbox with 3 tools in it), and can't reboot into recovery or flash stock back on it. How can I get it out of bootloop? I really need help! D:
Press all the three buttons , power , volume up and volume down together and boot into bootloader. From boot loader use volume buttons to go onto recovery , do a clean wipe there and reflash a ROM. Another alternative is to use adb and type
Code:
adb reboot recovery
then wipe clean and reflash ROM.
Red Devil said:
Press all the three buttons , power , volume up and volume down together and boot into bootloader. From boot loader use volume buttons to go onto recovery , do a clean wipe there and reflash a ROM. Another alternative is to use adb and type
Code:
adb reboot recovery
then wipe clean and reflash ROM.
Click to expand...
Click to collapse
You Probably forgot to do one or some of these steps before flashing, I had the same problem today trying to flash 10.2:
http://forum.xda-developers.com/showthread.php?t=2179330
Atrix HD Stuck on Animation
Red Devil said:
Press all the three buttons , power , volume up and volume down together and boot into bootloader. From boot loader use volume buttons to go onto recovery , do a clean wipe there and reflash a ROM. Another alternative is to use adb and type
Code:
adb reboot recovery
then wipe clean and reflash ROM.
Click to expand...
Click to collapse
Hi Red Devil,
I just tried to install CM 10.1.3 on my Motorola Atrix HD.
I forgot to wipe data and cache before installing the ROM, and now it is stuck in the boot animation.
When I press the power and volume keys down together, it takes my phone to a black screen, and when I press them again on the black screen it gives me a brief menu that says
"Normal power up"
"Recovery"
"AP Fastboot"
"Factory"
and another one I can't recall.
This screen times out in about 3 seconds. and regardless of which item from the menu I select, it still shows my boot logo, then the CM animation. I cant boot into fastboot or recovery, and I can't find anything good online to help me.
Help! What do I do?
I have installed CyanogenMod on many devices before, and have never had as many issues as with the LG G2.
I was able to install CWM Recovery, and I used that to backup my existing ROM, and to Install CM-10.2, the build for the vs980.
After installing, and rebooting, I am getting stuck on an infinite boot screen. And I have no idea how to bot into recovery.
The default boot to recovery / factory reset screen is supposed to be, holding the power button until the LG Logo appears, then prelease, and hold again... This does not work, it just goes right back into trying to boot CM.
If I hold Power + Vol+, I enter some Firmware Update screen.
How would one enter CWM Recovery using only hardware? And how can I fix my infinite bootloop?
Any and all help is greatly appreciated.
**Edit**
I found out that I was going into this mode, and not recovery / factory reset... because I was still plugged in via USB... As soon as I unplugged, I was able to do this as expected.
Mod, please delete. I am unable, and I have solved my own problem.
I am rooted with custom recovery, stuck on logo screen. I Can get to DL mode, but not recovery to restore my backup. usb debugging is enabled on the device, but its the Verizon version so it needs "Ethernet" connectivity to communicate via adb. so as of now its not communicating. anyway to send reboot recovery command so I can back up? or am I going to have to flash all the way back to stock through KDZ? and if I do that, do I lose root, and recovery, having to start all over?
What do you mean you can't get to recovery?
Sent from my LG D802
Lol. I mean i when I hold volume down and power key sequence it still just boots to lg logo and loops. I can not boot into twrp. Only download mode. What partition is recovery located? I am starting to wonder if I wiped it?
findinghomer said:
Lol. I mean i when I hold volume down and power key sequence it still just boots to lg logo and loops. I can not boot into twrp. Only download mode. What partition is recovery located? I am starting to wonder if I wiped it?
Click to expand...
Click to collapse
Aaand are you sure you released and pressed the keys again when the lg-logo came up? Also you should be able to get to the white lg reset-screen even if you have empty recovery partition.
Sent from my LG D802
Yes, I was. But I guess my timing was bad. I eventually got in, and recovered. Thanks for responding
Hi, I see a lot of posts everywhere, here and on reddit talking about how the latest PA wipes TWRP and root. I've never flashed a rom that did that. I'm not a newbie and would have been able to fix it, but my USB port is broken. I've been charging via the magnetic port. I don't like that people aren't being taken seriously with this request because in most cases, sure you could use flashboot, but in my case I'm locked out of my device.
I would use something like Rashr, but I don't have root. The only way I can think of to get root is to use one of those sketchy apps like KingoRoot and then install Rashr but I have a feeling that would probably brick my device and since it's "usable" (but I can't get into recovery or root it) I should probably cut my losses and sell it.
I think this release should be pulled if it's causing this many problems. If the release is updated with a working TWRP, would I be able to fix it through the PA updater, or is that only system files and no recovery?
We haven't shipped with root in a LOOOOONG time.
I've never seen a ROM flash remove recovery. The ROM itself has nothing to do with recovery, and doesn't actively remove it.
I tried Paranoid Android on my Xperia Z3 Tablet Compact, I liked it a lot, but P.A. breaks TWRP so I'd be forced to reinstall the rom from scratch with every rom update so I can't use P.A.
thommcn said:
I tried Paranoid Android on my Xperia Z3 Tablet Compact, I liked it a lot, but P.A. breaks TWRP so I'd be forced to reinstall the rom from scratch with every rom update so I can't use P.A.
Click to expand...
Click to collapse
Not required . It is very easy to get twrp after flashing PA. It is a problem with sony devices. Follow my guide on how to get twrp, but download the twrp for your device and not for z3 compact
http://forum.xda-developers.com/z3-compact/general/twrp-z3-compact-unlocked-bootloader-t3476868
---------- Post added at 07:11 AM ---------- Previous post was at 07:07 AM ----------
bananabytes said:
Hi, I see a lot of posts everywhere, here and on reddit talking about how the latest PA wipes TWRP and root. I've never flashed a rom that did that. I'm not a newbie and would have been able to fix it, but my USB port is broken. I've been charging via the magnetic port. I don't like that people aren't being taken seriously with this request because in most cases, sure you could use flashboot, but in my case I'm locked out of my device.
I would use something like Rashr, but I don't have root. The only way I can think of to get root is to use one of those sketchy apps like KingoRoot and then install Rashr but I have a feeling that would probably brick my device and since it's "usable" (but I can't get into recovery or root it) I should probably cut my losses and sell it.
I think this release should be pulled if it's causing this many problems. If the release is updated with a working TWRP, would I be able to fix it through the PA updater, or is that only system files and no recovery?
Click to expand...
Click to collapse
Im not a 100% sure this will work, it mostly wont work, but try using kingroot to get root on the device, then use flashfire to flash recovery to boot/FOTA/Recovery partition depending on your device. Then try getting into recovery. But how did you get recovery in the first place if you had a broken USB? Why would you take chances?
Hi panzerox123, Thanks for link to guide but no go - I followed that guide five times and failed five times. It fails at 'To enter recovery mode, power off your phone, and press and hold Vol-down and Power button together until you see the sony logo.', it boots stock android instead. I tried flashing to Recovery and to the FOTAKernel - both failed. Recovery doesn't work with stock or Paranoid Android on this Z3TC but does with CM12 and FreeXperia.
thommcn said:
Hi panzerox123, Thanks for link to guide but no go - I followed that guide five times and failed five times. It fails at 'To enter recovery mode, power off your phone, and press and hold Vol-down and Power button together until you see the sony logo.', it boots stock android instead. I tried flashing to Recovery and to the FOTAKernel - both failed. Recovery doesn't work with stock or Paranoid Android on this Z3TC but does with CM12 and FreeXperia.
Click to expand...
Click to collapse
Really? This is how I got recovery back when I flashed pa. Are you sure fastvoot is working in your device? When you hold vol- and power button for around 10 seconds, you shoyuld see Sony logo, and then screen flashes and enters recovery.
Another question, did you download the correct twrp for your device? The link in the thread is for z3 compact phone
My tablet is the SGP611 'scorpion_windy'. Firmware: SGP611_23.5.A.1.291_UK.ftf TWRP: twrp-3.0.2-0-scorpion_windy.img (https://dl.twrp.me/scorpion_windy/twrp-3.0.2-0-scorpion_windy.img)
Vol- and power buttons are pressed until I get the Sony logo but it doesn't enter recovery - instead the tablet boots. Unlike with CM12, I don't get to see the violet led either.
thommcn said:
My tablet is the SGP611 'scorpion_windy'. Firmware: SGP611_23.5.A.1.291_UK.ftf TWRP: twrp-3.0.2-0-scorpion_windy.img (https://dl.twrp.me/scorpion_windy/twrp-3.0.2-0-scorpion_windy.img)
Vol- and power buttons are pressed until I get the Sony logo but it doesn't enter recovery - instead the tablet boots. Unlike with CM12, I don't get to see the violet led either.
Click to expand...
Click to collapse
Hmmmm very weird... are you on stock or pa?
Wait... Flash the latest firmware available for your device using flashtool. It updates bootloader so you can enter recovery using the above.
If all else fails, there is another method to update pa without starting from scratch every time. Can't explain it right now, I'm on Mt phone, when I get to lapptop , I'll explain
23.5.A.1.291 is the latest firmware that I downloaded with XperiFirm http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
Either stock or P.A. won't enter recovery.
thommcn said:
23.5.A.1.291 is the latest firmware that I downloaded with XperiFirm http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142
Click to expand...
Click to collapse
Weird... I'll get back alright... Don't know why there are problems
The only method that will work for stock on this tablet to get recovery right now is this one: http://forum.xda-developers.com/z3-...torial-stock-android-marshmallow-6-0-t3409486 using RecRoot.
As for P.A. - attempting to enter recovery results in continuous bootloops until reset.
thommcn said:
The only method that will work for stock on this tablet to get recovery right now is this one: http://forum.xda-developers.com/z3-...torial-stock-android-marshmallow-6-0-t3409486 using RecRoot.
As for P.A. - attempting to enter recovery results in continuous bootloops until reset.
Click to expand...
Click to collapse
That only happens when the wrong recovery is flashed...
RecRoot is only used with stock because it was designed for the Z3 phone so obviously that is no good for our purposes as would still have to flash the correct version of twrp.
So I either flash the base.img from CM12 (lollipop) scorpion_windy or FreeXperia 6.0.1 (marshmallow) scorpion_windy, then flash TWRP scorpion_windy. Then get into recovery, then wipe dalvik, system, data, cache, then install paranoid android, then wipe dalvik + cache and finally reboot. Well it boots fine but booting in to recovery just ends in bootloops.
thommcn said:
RecRoot is only used with stock because it was designed for the Z3 phone so obviously that is no good for our purposes as would still have to flash the correct version of twrp.
So I either flash the base.img from CM12 (lollipop) scorpion_windy or FreeXperia 6.0.1 (marshmallow) scorpion_windy, then flash TWRP scorpion_windy. Then get into recovery, then wipe dalvik, system, data, cache, then install paranoid android, then wipe dalvik + cache and finally reboot. Well it boots fine but booting in to recovery just ends in bootloops.
Click to expand...
Click to collapse
Same here.
Entering Recovery from ADB or standard hard buttons (USB + Vol-Up several time at boot) caused the boot loops.
The only way I found to enter the Recovery mode is: Unplug USB, Vol-down + Power press at the same time until the sony logo comes up.
igiona said:
Same here.
Entering Recovery from ADB or standard hard buttons (USB + Vol-Up several time at boot) caused the boot loops.
The only way I found to enter the Recovery mode is: Unplug USB, Vol-down + Power press at the same time until the sony logo comes up.
Click to expand...
Click to collapse
That is not how you enter recovery, that is how you enter fastboot mode... To enter recovery, you need to have a recovery installed on the recovery partition. To enter it, press vol-down+power button until you see sony logo and then leave the buttons
panzerox123 said:
That is not how you enter recovery, that is how you enter fastboot mode... To enter recovery, you need to have a recovery installed on the recovery partition. To enter it, press vol-down+power button until you see sony logo and then leave the buttons
Click to expand...
Click to collapse
When the device is normally powered up, the status led turns purple/pink. There if the Volum-up (down as well?) is pressed a couple of time, the LED changes color and the device enters the Recovery mode.
Of course you need a recovery image to be flashed in the recovery partition.
The problem here is that with some ROMs (i.e. AOSPA) is not possible to enter the recovery mode via "purple/pink led" procedure. The device will enter a reboots loop.
This procedure works properly with CM12.1 and CM13.
from "theandroidsoul" (I cannot post outside link yet, sorry).
How to boot into recovery
Switch off your Xperia Z first
Switch it back on and the time when you see your phone’s LED notification light turn purple or pink — start pressing either the Volume UP or Volume Down key a couple of times and your phone will reboot into recovery
Click to expand...
Click to collapse
igiona said:
When the device is normally powered up, the status led turns purple/pink. There if the Volum-up (down as well?) is pressed a couple of time, the LED changes color and the device enters the Recovery mode.
Of course you need a recovery image to be flashed in the recovery partition.
The problem here is that with some ROMs (i.e. AOSPA) is not possible to enter the recovery mode via "purple/pink led" procedure. The device will enter a reboots loop.
This procedure works properly with CM12.1 and CM13.
from "theandroidsoul" (I cannot post outside link yet, sorry).
Click to expand...
Click to collapse
That is when your recovery is embedded with the kernel. If you have the latest marshmallow build for Sony, it allows to to boot into recovery partiton .
Hello there. My LG Optimus L7 was lagging to much with it's stock rom so I decided to flash a custom rom to it. So I rooted my phone, installed CWM, and then using Rom Manager app I rebooted to recovery mode, before that I was trying every combination I found on the internet about how to enter the recovery mode, but no success. Anyway, after rebooting into recovery I installed CM 10, but the phone got stocked into CM boot loop. Now I can't access recovery mode to reinstall the rom, or install a new one. I also tried emergency mode (holding the vol up then plugging the usb cable) , which didn't work either. How can I enter the recovery mode? Please help! Is there any way to access the recovery mode without the buttons combination in this state(when phone is soft bricked) ?
genisagan said:
Hello there. My LG Optimus L7 was lagging to much with it's stock rom so I decided to flash a custom rom to it. So I rooted my phone, installed CWM, and then using Rom Manager app I rebooted to recovery mode, before that I was trying every combination I found on the internet about how to enter the recovery mode, but no success. Anyway, after rebooting into recovery I installed CM 10, but the phone got stocked into CM boot loop. Now I can't access recovery mode to reinstall the rom, or install a new one. I also tried emergency mode (holding the vol up then plugging the usb cable) , which didn't work either. How can I enter the recovery mode? Please help! Is there any way to access the recovery mode without the buttons combination in this state(when phone is soft bricked) ?
Click to expand...
Click to collapse
I cannot access recovery too! I have TWRP installed but i tried every combination on internet and till can't access it Do somebody know any combinations to get into it?
I remember that once upon a time I was able to enter the recovery. But only once. I pressed randomly all buttons and succeeded. More times have I failed
Maybe it is the newest recovery fault.
I have the same problem. solutions?
V10 - power and volume lower (-) after the lights turn on release power and volume buttons and press only home button
V20 - power, volume lower and home, when you feel a vibration release all the buttons