Related
Hey, hello to all readers!
I am pretty new in this thing of modding the telephone, but I think it is going pretty well.
Last night I installed CM7 nightly build and I am very happy so far. Only thing I really would like to fix are the following:
- I would like to have 720p recording again.
- Fix the issue with the compass (it keeps turning around crazy)
Another question I have is:
I've read in this and in other forums that installing that fixed-sbf could lead to a problem when rebooting, it stays in the red M and wont boot.
Since I was doing my stuff along with another user and saw that he couldn't fix that, I haven't applied the patch.
What would that do? It will update / fix something? is completely necessary to apply this?
Thanks a lot!
Jorixine said:
Hey, hello to all readers!
I am pretty new in this thing of modding the telephone, but I think it is going pretty well.
Last night I installed CM7 nightly build and I am very happy so far. Only thing I really would like to fix are the following:
- I would like to have 720p recording again.
- Fix the issue with the compass (it keeps turning around crazy)
Another question I have is:
I've read in this and in other forums that installing that fixed-sbf could lead to a problem when rebooting, it stays in the red M and wont boot.
Since I was doing my stuff along with another user and saw that he couldn't fix that, I haven't applied the patch.
What would that do? It will update / fix something? is completely necessary to apply this?
Thanks a lot!
Click to expand...
Click to collapse
If you are using CWM 3.x, it's necessary to flash fixed-sbf. Because CWM 3.x is unable to flash kernel.
Solution for compass issue not found yet.
Sorry for this lame question, but how can I confirm which CMW I have?
I've rebooted the device several times and I have not had any issue and didn't install the fixed_sbf.
Pls help me out guys, im just a newbie. So i flashed the latest nightly CM12.1 and when it booted up, system UI has stopped appeared and i cant get rid of it. I think i didn't re-enable android debugging before flashing it. Is there any way i can enable android debugging before i flash the rom and gapps again? Pls help me out guys. I think i broke my phone.
You don't need to enable debugging, its just that latest cm12.1 build is broken, I just reflashed myself because of that systemui crash, you need to reflash too. You can use version with date 2015-04-16, and then update from the phone using cm integrated updater to version 2015-05-11, because version 2015-05-13 is broken.
Same thing happened to me this morning after I flashed the Nightly of 2015-05-13. I downloaded the Nightly with CyanDelta to reduce the download size and flashed in thorough recovery. After my device booted, I noticed my wallpaper changed and I kept getting "Unfortunately, SystemUI has stopped" error. But it kept showing up every 1-2 seconds making the device unusable. So I just flashed the Nightly of 2015-05-12 which was working and the error stopped showing. Thanks to CyanDelta that keeps a copy of the old Nightly after installing a new one.
I hope that you still have the "stable" Nightly on your device to roll back to the previous Nightly. If you have access to a computer, you might be able to download it directly from CM's website, transfer it thorough USB and flash it with Recovery. That would be the only solution I can come up with beside restoring a NANdroid Backup. But I'm no pro in Android stuff, maybe someone can come up with another solution.
ExcaliburUser said:
Pls help me out guys, im just a newbie. So i flashed the latest nightly CM12.1 and when it booted up, system UI has stopped appeared and i cant get rid of it. I think i didn't re-enable android debugging before flashing it. Is there any way i can enable android debugging before i flash the rom and gapps again? Pls help me out guys. I think i broke my phone.
Click to expand...
Click to collapse
Thanks for the info bro. :good:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
the error when booted can be resoled by flashing the latest vendor img, or at least the one relevant to your roms version.
took me about 2 weeks to figure this out because no one would give me the slightest hint when i asked.
the error screen when it first tries to start i havent been able to resolve, and am thinking there may be none.
not sure what your camera issue could be, but i have seen cam issues from the kernel, when the switch to 6.0,1 first began to merge.
maybe test another kernel, other than that i dont know.
Samehere
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
I'm facing exactly the same issue. The camera works fine when I flash a stock based ROM like pure nexus or digitalhigh but as soon as I flash an aosp based ROM or cyanogenmod like chroma,screw'd,benzo. The camera says couldn't connect to camera and nothing seems to work. I've wiped cache, data but still no progress.
I even tried the flashable camera.zip but didn't work.
Problem Solved !!!
Ju43 said:
First of all I know there's another thread about this, but the guy seemed to be able to fix this problem by rebooting his phone so I'm making a new thread.
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.
Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the bootloader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".
Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
Click to expand...
Click to collapse
Just flash the MBD08M.img via fastboot, then flash CM13 on top of it, restart the phone. The Camera won't work yet, now go to Benzo Rom and use his flashable vendor image for MMB29M via Recovery and Reboot. And it works like charm ! =D
You can also flash him flashable camera.zip, to get the stock camera
wrahul31 said:
Just flash the MBD08M.img via fastboot, then flash CM13 on top of it, restart the phone. The Camera won't work yet, now go to Benzo Rom and use his flashable vendor image for MMB29M via Recovery and Reboot. And it works like charm ! =D
You can also flash him flashable camera.zip, to get the stock camera
Click to expand...
Click to collapse
Thanks, I have reverted to stock ROM but I might try it soon
https://download.mokeedev.com/?device=zoom
Does someone try this rom? If u ever on this rom, can u give a feedback about the rom..? I would like to know your opinion..
X10MINISTER said:
Does someone try this rom? If u ever on this rom, can u give a feedback about the rom..? I would like to know your opinion..
Click to expand...
Click to collapse
Rom works but it wasn't maintained. No new bug correction from february.
stuccamelo said:
Rom works but it wasn't maintained. No new bug correction from february.
Click to expand...
Click to collapse
Thanks for sharing ur opinion/experiences on this rom.. Im running on latest build of this mokee rom, i think it is suitable for daily driver..but I got some problem with hotspot(maybe it is because of mod that i've installed).. Maybe u got some solution on this
X10MINISTER said:
Thanks for sharing ur opinion/experiences on this rom.. Im running on latest build of this mokee rom, i think it is suitable for daily driver..but I got some problem with hotspot(maybe it is because of mod that i've installed).. Maybe u got some solution on this
Click to expand...
Click to collapse
Sorry no solution I have big problem with gmaps doesn't recalculate path after initial path and play store give "not compatible device" error in some apps.
Good thing battery drain is very very good
stuccamelo said:
Sorry no solution I have big problem with gmaps doesn't recalculate path after initial path and play store give "not compatible device" error in some apps.
Good thing battery drain is very very good
Click to expand...
Click to collapse
So, it mean that u also facing the hotspot problem.?
Can u change/install fonts in mokee roms? Cause I have an issue with changing font style using iFont apps..its say installed but after reboot font style doesnt change. Any solution?
linux shall eternally bloat all search engines with expired ?=
as it is stated in the title: the internet is full of long expired conversations about issues which are gone, along with hardware.
back in the beginning i recall only one distro Dev, SimplyMepis, who always, promptly warned, that most if not all information online about Linux is outdated or incorrect.
now on mokee, has anyone tested mokee naugat on vibe shot as recent as September/October 2017? The reason I ask is because there are no reviews or any useful feedback on mokee download/changelog page. I used it in August and each time the phone disconnect from WiFi it would reboot with an ugly, annoying double beep.
Apart from this issue everything would work pefectly well, including both sim loaded.
Thanks for taking time to respond.
Dr Tungsten said:
as it is stated in the title: the internet is full of long expired conversations about issues which are gone, along with hardware.
back in the beginning i recall only one distro Dev, SimplyMepis, who always, promptly warned, that most if not all information online about Linux is outdated or incorrect.
now on mokee, has anyone tested mokee naugat on vibe shot as recent as September/October 2017? The reason I ask is because there are no reviews or any useful feedback on mokee download/changelog page. I used it in August and each time the phone disconnect from WiFi it would reboot with an ugly, annoying double beep.
Apart from this issue everything would work pefectly well, including both sim loaded.
Thanks for taking time to respond.
Click to expand...
Click to collapse
There are a lot of recent updates for this rom. I flashed the most recent (2017-11-21 date). I didn't make a lot of testing but the problem you refered has been solved and the performance and stability seems good.
The only issue I noticed so far is that the phone does not start automatically from the shutdown state when an alarm is set.
@piccolo2k2 Was your device flagged as certified? When I flushed the rom I wasn't able to pass the SafetyNet test and I would appear as uncertified in play store, meaning I couldn't download most apps like Messenger or Facebook. I installed a third party app store which worked fine, but YouTube wouldn't play any video, because it couldn't load any ads... I even tried Magisk with no luck..
GeorgeTsak said:
@piccolo2k2 Was your device flagged as certified? When I flushed the rom I wasn't able to pass the SafetyNet test and I would appear as uncertified in play store, meaning I couldn't download most apps like Messenger or Facebook. I installed a third party app store which worked fine, but YouTube wouldn't play any video, because it couldn't load any ads... I even tried Magisk with no luck..
Click to expand...
Click to collapse
This is not my main phone right now so I spend very limited time using or testing it but you are right, I have just checked that with this ROM the device is unable to pass the SafeNet test so far. On the other hand I have not problems at all playing videos with youtube app or rooting the device. I'm using supersu v2.82 and TRWP-3.0.2-0 for lenovo 6.0 by wzsx150 (didn't try Magisk)
has anyone managed to install this ROM?
i tried to install it but failed.
I unlocked the bootloader using the method described here, and installed TWRP recovery as described here
when i try to install it - the flashing is stopped by a long vibration and the device went off, i tried to debug the flashing process, it seems that the step of mounting "\system" fails, i tried to replace the mount/unmount calls from updater_script with respective run_program(busybox) commands, but had no success with that. when i'm using the TWRP build in funcitonlity to wipe the system partition, TWRP claims the operation was successful, but checking the system partition details shows that the partition still contains data.
ohh, and also - the device model seems strange, the script checked that the model is zoom_tdd (or something like that) but the device (the bootloader?) return Z90a40... (i also updated the script to check for Z90a40)
the current state is that the device won't boot, but i can get into recovery.
Anyone have an idea how to proceed?
Thanks.
mrtowel said:
i tried to install it but failed.
I unlocked the bootloader using the method described here, and installed TWRP recovery as described here
when i try to install it - the flashing is stopped by a long vibration and the device went off, i tried to debug the flashing process, it seems that the step of mounting "\system" fails, i tried to replace the mount/unmount calls from updater_script with respective run_program(busybox) commands, but had no success with that. when i'm using the TWRP build in funcitonlity to wipe the system partition, TWRP claims the operation was successful, but checking the system partition details shows that the partition still contains data.
ohh, and also - the device model seems strange, the script checked that the model is zoom_tdd (or something like that) but the device (the bootloader?) return Z90a40... (i also updated the script to check for Z90a40)
the current state is that the device won't boot, but i can get into recovery.
Anyone have an idea how to proceed?
Thanks.
Click to expand...
Click to collapse
I think you need a different TWRP version. Try this one:
https://drive.google.com/file/d/0B1Sms71Oe6FIQnl4STlhSk96b0E/view?usp=sharing
Help me!
I'm new to these things. Installing roms and ****s. Can someone help me with the step by step procedure of installing this room on my Lenovo vibe shot. Thanks in advance.
The same probvlem with TWRP
piccolo2k2 said:
I think you need a different TWRP version. Try this one:
Click to expand...
Click to collapse
I have exactly the same problem.
Did you resolved it? Tried also mentioned "Twrp by rahul.rar", but the same problem - unable to mount /system partition.
Thanks for reply,
st
bug fix?
does anybody tested it?
is it still any bug on release version MK71.2-zoom-180914-RELEASE?
hhaekal said:
does anybody tested it?
is it still any bug on release version MK71.2-zoom-180914-RELEASE?
Click to expand...
Click to collapse
Im using it right now.. Im still have the problem with:
-hotspot tethering,bluetooth tethering
-usb mtp
-suddenly shutdown when on wifi
Have someone had the problem with delay in receiving whatsapp messages?
Hello,
has anyone tested the MK71.2-zoom-181107-RELEASE version? Is the bug with the WiFi still there?
Alex_135 said:
Hello,
has anyone tested the MK71.2-zoom-181107-RELEASE version? Is the bug with the WiFi still there?
Click to expand...
Click to collapse
Hi,
I'm using the release and there is no bug with WIFI.
Linaxx said:
Hi,
I'm using the release and there is no bug with WIFI.
Click to expand...
Click to collapse
How about wifi tethering problem? Does it remain error when wifi tethering are enabled?
Hello Guys.
Im in dire need of help actually. Ive recently rooted my galaxy grand 2 running 4.4.2 KK and set it up with twrp v3.1.
yet im having the issue when i install a custom rom.
1.) Cyanogenmod - MM
When i install the rom, it installs and and on 1st reboot it optimizes all the apps yet gets stuck on "starting apps". when i force restarted it, it boots till the welcome screen to select the language but then the touch screen stops responding but its not stuck as pressing the power button turns off the screen and back on and also on long press reboot options appear , which on the other hand responds to touch. so im guessing its not the touch screen issue? but then ive noticed that apps also crash while im on the welcome screen.
2. Resurrection remix - MM
Same issue yet this passes the starting apps screen and goes to the home screen directly but only to be found that the screen isnt responding.
this is very weird because of all the phones ive installed custom rom on, this is the first case im having such trouble.
could it be because knox is installed? i tried getting rid of it from the stock rom but everytime i try that i cant boot back up because it gets stuck at the samsung logo.
can some one help me quick because this is really irritating.
Thanks.
Maybe its realy screen problem... did the touch screen works on twrp
fire_onCA said:
Maybe its realy screen problem... did the touch screen works on twrp
Click to expand...
Click to collapse
Yes It Does. Its not the screen issue because on stock rom everything works properly.
Im guessing somethings interrupting with the OS, causing the apps to crash.
aymanabdulla said:
Hello Guys.
Im in dire need of help actually. Ive recently rooted my galaxy grand 2 running 4.4.2 KK and set it up with twrp v3.1.
yet im having the issue when i install a custom rom.
1.) Cyanogenmod - MM
When i install the rom, it installs and and on 1st reboot it optimizes all the apps yet gets stuck on "starting apps". when i force restarted it, it boots till the welcome screen to select the language but then the touch screen stops responding but its not stuck as pressing the power button turns off the screen and back on and also on long press reboot options appear , which on the other hand responds to touch. so im guessing its not the touch screen issue? but then ive noticed that apps also crash while im on the welcome screen.
2. Resurrection remix - MM
Same issue yet this passes the starting apps screen and goes to the home screen directly but only to be found that the screen isnt responding.
this is very weird because of all the phones ive installed custom rom on, this is the first case im having such trouble.
could it be because knox is installed? i tried getting rid of it from the stock rom but everytime i try that i cant boot back up because it gets stuck at the samsung logo.
can some one help me quick because this is really irritating.
Thanks.
Click to expand...
Click to collapse
Flash twrp 3.0.0 (over your existing twrp 3.1). Just copy the twrp.zip to your root directory of internal storage and flash using twrp 3.1. Maybe that will help because it helped me.
mfaisal98 said:
Flash twrp 3.0.0 (over your existing twrp 3.1). Just copy the twrp.zip to your root directory of internal storage and flash using twrp 3.1. Maybe that will help because it helped me.
Click to expand...
Click to collapse
but I've already tried that! I started off with 3.0 and when that didn't work I moved to 3.1!
I also noticed I get a small message on top when. I start the phone with the Samsung logo saying that something isn't seandroid when I install a custom room but it isn't like an error or something.
Could the issue be with the kernal?
Or should I try cwm recovery now?
aymanabdulla said:
but I've already tried that! I started off with 3.0 and when that didn't work I moved to 3.1!
I also noticed I get a small message on top when. I start the phone with the Samsung logo saying that something isn't seandroid when I install a custom room but it isn't like an error or something.
Could the issue be with the kernal?
Or should I try cwm recovery now?
Click to expand...
Click to collapse
If you get some error message on boot while there is the Samsung logo then there is something wrong! Now you should:
1. Flash the stock rom (to correct that error message on boot)
2. Flash recovery
3. Root (SuperSU 2.82)
4. Continue with the installation (thru twrp 3.0.0) of 6.0.1 but before that:
(a) Factory reset
(b) Wipe data
(c) Wipe cache
(d) Wipe dalvik cache)
(e) DO NOT WIPE THE SYSTEM!
Goog luck
I suggest flashing the stock 4.4.2 ROM via Odin and then start everything from scratch. Currently facing the same problem after flashing the Ressurection Remix M 5.7.4.
mfaisal98 said:
If you get some error message on boot while there is the Samsung logo then there is something wrong! Now you should:
1. Flash the stock rom (to correct that error message on boot)
2. Flash recovery
3. Root (SuperSU 2.82)
4. Continue with the installation (thru twrp 3.0.0) of 6.0.1 but before that:
(a) Factory reset
(b) Wipe data
(c) Wipe cache
(d) Wipe dalvik cache)
(e) DO NOT WIPE THE SYSTEM!
Goog luck
Click to expand...
Click to collapse
Its not actually an error message but a small notice on the top left corner.
When I restore my official rom back the message is normally gone.
But I will try again with ur advice again because I always wipe system before flashing the rom so it could be causing the issue.
Thanks I'll let u know what happens
kaiserfakinaway said:
I suggest flashing the stock 4.4.2 ROM via Odin and then start everything from scratch. Currently facing the same problem after flashing the Ressurection Remix M 5.7.4.
Click to expand...
Click to collapse
I did do that. I have the official stock rom running now since RR and cyanogenmod isn't responding.
aymanabdulla said:
I did do that. I have the official stock ROM running now since RR and CyanogenMod isn't responding.
Click to expand...
Click to collapse
Have you tried flashing RR or CM13 after flashing the stock ROM?
and could you give me the full name of the stock ROM?
aymanabdulla said:
Hello Guys.
Im in dire need of help actually. Ive recently rooted my galaxy grand 2 running 4.4.2 KK and set it up with twrp v3.1.
yet im having the issue when i install a custom rom.
1.) Cyanogenmod - MM
When i install the rom, it installs and and on 1st reboot it optimizes all the apps yet gets stuck on "starting apps". when i force restarted it, it boots till the welcome screen to select the language but then the touch screen stops responding but its not stuck as pressing the power button turns off the screen and back on and also on long press reboot options appear , which on the other hand responds to touch. so im guessing its not the touch screen issue? but then ive noticed that apps also crash while im on the welcome screen.
2. Resurrection remix - MM
Same issue yet this passes the starting apps screen and goes to the home screen directly but only to be found that the screen isnt responding.
this is very weird because of all the phones ive installed custom rom on, this is the first case im having such trouble.
could it be because knox is installed? i tried getting rid of it from the stock rom but everytime i try that i cant boot back up because it gets stuck at the samsung logo.
can some one help me quick because this is really irritating.
Thanks.
Click to expand...
Click to collapse
Did you flashed the vendor.zip provided after flashing the rom?If not,then it is the cause of that problem
kaiserfakinaway said:
Have you tried flashing RR or CM13 after flashing the stock ROM?
and could you give me the full name of the stock ROM?
Click to expand...
Click to collapse
Yes, thats what i did.
G7102DDUBNK1_G7102ODDBNK1_G7102DDUBNK1_HOME.tar.md5 this was the file name. it works fine i guess, had some issues with the sim as the phone keeps on asking to reboot but no other issues.
Subhashis said:
Did you flashed the vendor.zip provided after flashing the rom?If not,then it is the cause of that problem
Click to expand...
Click to collapse
Yes i did. as well as the front cam + patch fix. i flashed both yet still the same issue.
mfaisal98 said:
If you get some error message on boot while there is the Samsung logo then there is something wrong! Now you should:
1. Flash the stock rom (to correct that error message on boot)
2. Flash recovery
3. Root (SuperSU 2.82)
4. Continue with the installation (thru twrp 3.0.0) of 6.0.1 but before that:
(a) Factory reset
(b) Wipe data
(c) Wipe cache
(d) Wipe dalvik cache)
(e) DO NOT WIPE THE SYSTEM!
Goog luck
Click to expand...
Click to collapse
Ok i tried this with the steps u have told me. still no luck
i went to twrp opened wipe, wiped dalvik cache, cache, internal storage and data. but not the system.
same issue. also the small message which comes in the top left corner is
"Kernal is not seandroid enforcing" red colour font
"set warranty bit : kernal" yellow colour font
why is this shown?
should i try cwm?
So I have been trying various ROMs and found out that this problem only exists on MM ROMs. RR-M and CM13 both starts but system stops responding completely. But RR-N and CM14.1/12.1/12 are working flawlessly.
---------- Post added at 08:05 AM ---------- Previous post was at 08:03 AM ----------
aymanabdulla said:
Ok i tried this with the steps u have told me. still no luck
i went to twrp opened wipe, wiped dalvik cache, cache, internal storage and data. but not the system.
same issue. also the small message which comes in the top left corner is
"Kernal is not seandroid enforcing" red colour font
"set warranty bit : kernal" yellow colour font
why is this shown?
should i try cwm?
Click to expand...
Click to collapse
That small message is not a problem. It is showing because the kernel is not selinux enforcing.
kaiserfakinaway said:
So I have been trying various ROMs and found out that this problem only exists on MM ROMs. RR-M and CM13 both starts but system stops responding completely. But RR-N and CM14.1/12.1/12 are working flawlessly.
---------- Post added at 08:05 AM ---------- Previous post was at 08:03 AM ----------
That small message is not a problem. It is showing because the kernel is not selinux enforcing.
Click to expand...
Click to collapse
Why Doesnt any one else have this problem?
oh is it? what about lineage os 13.1 running MM?
Fine i have put cm12.1 for download, will flash it and let u know what happened.
Fingers Crossed
kaiserfakinaway said:
So I have been trying various ROMs and found out that this problem only exists on MM ROMs. RR-M and CM13 both starts but system stops responding completely. But RR-N and CM14.1/12.1/12 are working flawlessly.
---------- Post added at 08:05 AM ---------- Previous post was at 08:03 AM ----------
That small message is not a problem. It is showing because the kernel is not selinux enforcing.
Click to expand...
Click to collapse
Thank You So MUCH.....
The issue was with the MM roms, because cm12.1 seems to be working perfectly, although not the camera. could someone tell me what about that now?
what now should we close this thread or figure out why MM isnt working on this device? Kernal Issue?
Could someone also check if the Lineage os with MM works or not?
Thanks again.
aymanabdulla said:
Thank You So MUCH.....
The issue was with the MM roms, because cm12.1 seems to be working perfectly, although not the camera. could someone tell me what about that now?
what now should we close this thread or figure out why MM isnt working on this device? Kernal Issue?
Could someone also check if the Lineage os with MM works or not?
Thanks again.
Click to expand...
Click to collapse
Have you tried any TW MM ports like J7 Hybrid MM Heavily Debloated Port or [ROM][6.0.1][TW][Electron Rom][Version 1] or [ROM][6.0.1][TW] JSERROM Version 3.1 [BETA][ms013g]?
kaiserfakinaway said:
Have you tried any TW MM ports like J7 Hybrid MM Heavily Debloated Port or [ROM][6.0.1][TW][Electron Rom][Version 1] or [ROM][6.0.1][TW] JSERROM Version 3.1 [BETA][ms013g]?
Click to expand...
Click to collapse
Nope, all of them have camera issues too.
but im sure there will be a fix for this, since its running LOLLIPOP.
I'll let u know.
aymanabdulla said:
Thank You So MUCH.....
The issue was with the MM roms, because cm12.1 seems to be working perfectly, although not the camera. could someone tell me what about that now?
what now should we close this thread or figure out why MM isnt working on this device? Kernal Issue?
Could someone also check if the Lineage os with MM works or not?
Thanks again.
Click to expand...
Click to collapse
Might not be a kernel issue because I have also tried with this custom kernel [KERNEL][5.x/TW/6.x]Infected Kernel R4[15-05-2016] and still the same.