hi
i installed lastest cyanogen mod for my G2 but unfortunatly i found out that most of my sensors are disabled like the gyroscope.
any idea why ? anything i need to install ?
thanks
You need the proper baseband for CM11.
CM11 uses jelly bean sources so you need the 4.2.2 baseband. cloudyfa has them, search around in these forums or on Google. That will fix the sensors. Keep in mind when returning to a 4.4.2 Rom that you need to flash the 4.4.2 baseband..
(note: if you have the verizon lg g2 and you're using unofficial cm11 that's based on 4.4.2 sources, you need to flash that. Again, cloudyfa has a repo)
Last week there was a problem im CM which f...ed up sensors. Same problem in some CM based AOSP Roms. In this case has nothing to do with baseband.
Should be fixed now. Just flash newest version.
tropenfrucht said:
Last week there was a problem im CM which f...ed up sensors. Same problem in some CM based AOSP Roms. In this case has nothing to do with baseband.
Should be fixed now. Just flash newest version.
Click to expand...
Click to collapse
We hope that ?
Related
Hello everyone
Finally rooted my LG L700 last night, with the v20a rom. It said it was a European rom.
I've seen many roms around and I have a US phone. Are there rooted roms specifically for the US L7 or does it not matter?
I couldn't find any US roms on the lg l7 firmware list.
Also which is currently the best rom to have at the moment?
Just flash cm10 and thats all (cm10 official - also the best rom currently)
CM10 is the best.But on my phone (p705) deep sleep not working.
Thank you guys!
Can I just install CM10 onto my already rooted (v20a) phone?
Or do I need to go back to stock firmware again, and THEN install CM!0?
Well I just installed CM10 for the first time and HOLY ****ING ****
THIS THING IS INCREDIBLE!!! my phone is soooooo much faster and ridiculously clean looking. its like that "new phone feeling" all over again
Just came across a problem, I'm not getting any service.
Edit: Nevermind I fixed the no service issue, just needed to reinstall the baseband.
pac-man question
hi guys so i'm on cm10 and about to switch to pac-man. do i have to reset and format system when flashing pacman because i heard that pacman has a part of cm10 in it.
kaandurgut said:
CM10 is the best.But on my phone (p705) deep sleep not working.
Click to expand...
Click to collapse
me too, how to fix it?
Iv already got a GPS lock when I was on xdabebbs ROM 3 different times. Then I clean flashed carbon and mahdi. Well in carbon and mahdi, if I hit GPS to see where I am, It'l Lock like 3houses down. So its kinda close. But when I type in an address to navigate to it, the GPS signal just gives up and says GPS signal lost. I even flashed the g2gpsfix.zip but no luck . but that zip works great on ROMs that aren't for 24a
Which version of Mahdi? Depending on the version (April release, beta release, or May aka Release 1) you need different versions of the baseband to have working sensors, rotation, GPS, etc.
If you are using a version prior to Release 1, you also need to flash a stock-based ROM in order to purposely configure the sensors.
IOW, you should read this post:
http://forum.xda-developers.com/showthread.php?p=52568043
And then upgrade to Mahdi 2.5 Release 1, using the stock kitkat baseband.
Typos courtesy of my LG G2 (D803) running Mahdi-ROM.
phoenix_rizzen said:
Which version of Mahdi? Depending on the version (April release, beta release, or May aka Release 1) you need different versions of the baseband to have working sensors, rotation, GPS, etc.
If you are using a version prior to Release 1, you also need to flash a stock-based ROM in order to purposely configure the sensors.
IOW, you should read this post:
http://forum.xda-developers.com/showthread.php?p=52568043
And then upgrade to Mahdi 2.5 Release 1, using the stock kitkat baseband.
Typos courtesy of my LG G2 (D803) running Mahdi-ROM.
Click to expand...
Click to collapse
Thanks. But I'm already running the 24a kk ota version of mahdi
sent from your moms phone
Just released for the Nexus devices, so expect some of the (still) supported AOSP roms to roll this out by end-of-month - if not sooner. Please don't use this as an excuse to spam threads asking for ETA's, as all 4.4.3 discussion can go here until those respective threads go live.
Thank you.
CM11 4.4.3 is now available for s2 i9100.
CM11 4.4.3 is now available for s2 i9100.
any stable 4.4.3 version released? i flashed 4.4.3 slimsaber before and the random restarts kinda turn me off. I'm back to 4.3.1 and it's rock stable
jammerlee711 said:
any stable 4.4.3 version released? i flashed 4.4.3 slimsaber before and the random restarts kinda turn me off. I'm back to 4.3.1 and it's rock stable
Click to expand...
Click to collapse
Did you do a full device reset? I usually dirty flash until 4.4.2 latest release, then fully wiped clean my device before jumping on 4.4.3.
4.4.3 Really looks great
MrRaines said:
4.4.3 Really looks great
Click to expand...
Click to collapse
I'm thinking about install CM11 M7 on my s2, what do you guys think about it? Bugs and something like that?
CM11 M7 works flawlessly... but:
- there is no default ringtone so if u wiped your /data you will hear silence when someone calls u
- there is no kernel with working usb-otg nor usb-hdmi around for this release, but DorimanX team is looking on to that.
- CM's gapps not working (not ready for 4.4.3 obviously), use pa_gapps (http://forum.xda-developers.com/showthread.php?t=2397942) - in my case only micro was small enough to fit with that new huge CM
- that kitkat /storage/sdcard0 read-only issue makes lot of apps to just crash !!
Besides above it works pretty well. Wifi stable, hsdpa stable, calls/sms fine, browser fine. Can't find anything more not WAI.
At this time I'd suggest NOT flashing DorimanX on newest CM 11 M7.
If u wiped /data partition you have to recreate some default structures (eg. DCIM or camera and gallery won't work).
I've been looking for custom roms with android 5.0 (lollipop) to flash on my Samsung Galaxy S4 SGH-i337m (jfltecan), however I can't find any. I know Cyanogen mod has cm12 for the jflte but not for jfltecan, can I still flash cm12 for jflte on my device or will it brick it? I used to have an s3 and I flashed carbon rom for d2att, edited some lines as to bypass status 7 and it worked fine. I was just wondering if I could do the same for my s4. Thanks!
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Simax8 said:
I've been looking for custom roms with android 5.0 (lollipop) to flash on my Samsung Galaxy S4 SGH-i337m (jfltecan), however I can't find any. I know Cyanogen mod has cm12 for the jflte but not for jfltecan, can I still flash cm12 for jflte on my device or will it brick it? I used to have an s3 and I flashed carbon rom for d2att, edited some lines as to bypass status 7 and it worked fine. I was just wondering if I could do the same for my s4. Thanks!
Click to expand...
Click to collapse
I'm using the GPE ROM, its great!! Rogers i337m
Sent from my GT-I9505G using XDA Free mobile app
Simax8 said:
I've been looking for custom roms with android 5.0 (lollipop) to flash on my Samsung Galaxy S4 SGH-i337m (jfltecan), however I can't find any. I know Cyanogen mod has cm12 for the jflte but not for jfltecan, can I still flash cm12 for jflte on my device or will it brick it? I used to have an s3 and I flashed carbon rom for d2att, edited some lines as to bypass status 7 and it worked fine. I was just wondering if I could do the same for my s4. Thanks!
Click to expand...
Click to collapse
I'm on sgh-i337m with cm12 for the jflte and it's working great you need to change the name of device in updater script and all is working
sorry for my bad english
mugensiz said:
I'm on sgh-i337m with cm12 for the jflte and it's working great you need to change the name of device in updater script and all is working
sorry for my bad english
Click to expand...
Click to collapse
So you are not having any issues at all? I am considering doing this. Do you have a link to a guide you used?
I use the AntaresOne Rom from this Link http://forum.xda-developers.com/showthread.php?t=2557353 with my sgs4 (sgh-1337m) from Fido and the only issues are wifi is kinda wonky(doesn't always save network info, doesn't always connect, sometimes drops connexion, but it DOES work fine when connected) and battery sometimes drains really fast. NB that this last issue has been labelled "cosmetic" by someone who knows a great deal more than me about Android. I have NEVER had my phone run out of battery and shutdown., just some days at 6pm it says 25%, other days it reads 76%. Kinda random. About to test the "Danvdh's GPE Edition ROM" 5.0.1 Lollipop, will post when I can confirm working or not.
EchoeROM is a good one.
No service after flashing...
I was on SlimKat 4.4.4 which was good, but wanted to upgrade to Lollipop after seeing it on my Nexus 5 (which is now broken). I have a Bell SGH-I337M
I first tried the CM12 Optimized build, wouldn't ever get past the boot screen...
Tried GPE, and it installed and ran fine, but my service was cutting in and out (so basically useless)
Tried SlimLP, it also installed fine but I was having the same service problem as with GPE.
How are you guys installing these ROMS? The only info I could find to fix the problem involved modem/radio.. I tried flashing a LP modem with the ROM but it didn't work. And all the radio-related information was from 2011 so I didn't bother with it. Any help would be much appreciated, I've been messing with this for 2 days now and get seem to fix it
Hello all I was wondering if anyone had any conclusive advice on whether, and if they do, how, AOSP ROMS have working voip?
Got my G2 recently and have tried blisspop, ressurectionremix and cm12. I have settled on cm12 but a recurring theme a month these LP CM AOSP based roms is that my mic doesnt work in skype. I can see and hear the other person and they can see me but can't hear me. I know this is has been discussed in threads but there are conflicting reports on whether it is working or not.
D802 bought on 4.4.2
ioRoot and Autorec
Flashed a JB bootloader, stayed on the KK baseband as cm12 can take either KK or JB
Flashed CM12
Have tried the audio policy fix found on resurrection remix rom thread (2nd post) and didnt work, neither has flashing a JB baseband. Was wondering if anyone had got skype working on a lollipop AOSP rom and how?
nb/ some people report distorted mic and some report mic not working. to clarify, my problem is the latter