I currently have a 900T that I rooted. Last night i tried to install Project Infinity. I followed the instructions by clearing the cache and doing a full wipe. After completing the installer, i am stuck in a bootloop. Any help? I've tried to clear the system multiple times and tried to re install multiple times, but to no avail. Any help would be greatly appreciated
Related
I recently rooted and attempted to flash a rom to my evo. I have tried both clockwork and RA 2.3 currently. I flashed the stock rooted rom as well as synergy. I keep getting the bootloader evertime I reboot.
I flashed the rom with RA it says that it was successful, but I keep getting the bootloader. Did I change a setting in the boot loader and miss it? I have also tried booting the phone without the sd card in the phone.
I also tried wiping the
-Data
-Cache
-Dalvik Cache
-.android_secure
-System
3x each and then reflashed
Any help is appreciated sorry if I rambled but Im trying to include any important information.
Jimmy
Wipe boot, system, cache, data, dalvik, and then flash. I did this and I got no issues. Just be sure to use a proper nandroid backup to restore too. I used twrp as my default recovery and RA as my secondary for when I wanted to wipe boot if I was having issues (I kept getting bootloops) so I say try that and report back here.
My phone went dead last night so Ill leave it to charge all day and try it again, I had previously tried wiping all 5 that I had listed in the op 3 times and then flashed. I will try it again this afternoon.
Just a thought, you may want to reflash your recovery
so I DL the image from forum.xda-developers.com/showpost.php?p=7889836&postcount=18 and then DL the cyanogen rom. I followed the same steps as I had multiple done multiple times and explained above but this time it worked.
Maybe it was the RA version I was using, not real sure.
I appreciate the help again.
I have my recovery become corrupt twice since I got this phone in February.
Reflashing Recovery fixed it both times
im currently on revival v2 mtd, and im trying to flash cleangb mtd. i think i followed all the correct steps by wiping data/cache, mounting system, installing zip, unmounting system after, and rebooting. i just cant seem to get past the samsung logo. i tried removing the battery and restarting, and i also tried installing the rom again. what am i doing wrong?
edit:
i tried reinstalling it again, and this time it worked.
Hi guys,
I have the standard note III 9005 and I had always installed CFWs on it.
I wanted to update to newer 6.0.1 Roms (had 6 roms before) but I seem to have a VERY annoying bug:
I tried to install Temaseks rom and resurrection rom but I had huge issues with it. I got bootloops although I got the newest 3.0.2.0 Team Win Recovery Project
I installed rom, GAPPS (correct version of course 6.0.1) , install rom again then delete cache and then it worked on both roms.
So a simple "install rom, GAPPS, then clean cache" didnt work. I tried to install multiple times until I got the installation! YAY! BUUUT!
Here is the fun part:
If I restarted the phone acidentally or on purpose I got stuck in a bootloop. After that the phone was unuseable again so the installation was useless.
Only solution is to completely wipe and reinstall and experiment with the order of installation until it works!
I did install STOCK rom because I was so freaked out and then went with ODIN the complete rooting guide for clean rooting, but still problem exists.
I tried two other roms but the problem was that while flashing the phone restarted automaticly and then TWRP said no installed rom? ???
Huge thanks for helping me!
New info:
I was able to make the rom work. I restarted and got stuck into bootloop!
I could boot normally after deleting dalvik cache!
But after rebooting I got into bootloop. Tried deleting cache again but this time it never booted properly.
How can I avoid by always deleting dalvik whenever I have to restart my phone (if battery dies or purpose)?
PPS: Stock Rom flash works flavlessly. I am waiting in stock rom until I find a proper solution :"(
Suggest you read the roms faqs and Q&A particularly with regard to TWRP .
Im currently using MIUI 8 custom rom. Since Kyd StockRom was out, i decided to try it out. After wiping data and cache and dalvik cache, i tried to flash the KYD Rom, then after the successful operation, i rebooted it and suddenly it was stuck on SAMSUNG GALAXY GRAND 2 SM-G1207 for about an hour already. I can't seem to find the problem. Please help me
Ershid said:
Im currently using MIUI 8 custom rom. Since Kyd StockRom was out, i decided to try it out. After wiping data and cache and dalvik cache, i tried to flash the KYD Rom, then after the successful operation, i rebooted it and suddenly it was stuck on SAMSUNG GALAXY GRAND 2 SM-G1207 for about an hour already. I can't seem to find the problem. Please help me
Click to expand...
Click to collapse
This is bootloop
Download another rom and move it to sd card then flash it
Or download the official frimware from sammobile and flash it via odin
Hi I have a SM-N910F model which is proving extremely difficult to flash. I firstly flashed the latest Marshmallow UK BTU firmware on it which resulted in a boot loop. I cleared cache partition and wiped data/factory reset in the stock recovery (and TWRM recovery) but this did not fix the problem. So I flashed the phone again and this time it was stuck in a boot loop with the text "recovering booting..." at the top left. Tried the same as before and still didnt fix it.
So I then tried a different stock rom - Lollipop UK BTU firmware. This gave me the exact same problems as before. However on a few occasions, I also got an error on the recovery screen saying cache could not be mounted. I cleared the cache partition, tried reformatting cache using TWRM but none of this worked. Eventually I reflashed and it went away but the boot loop doesnt go.
Lastly I tried an even older firmware - Kitkat UK BTU firmware. This again gave me a boot loop problem. It also kept displaying the cannot mount cache error as well. I tried using PIT file to repartition the device and eventually the error went but the device would still be on boot loop. However on two occasions the phone did go past the Samsung logo and show the first setup screen (where you select initial settings like Wifi etc). After like 10-15 seconds it would just switch off and then go back into boot loop. I havent managed to get to the first setup screen again.
I have tried flashing with various different Odin versions but still no luck.
I feel like I have exhausted my options and not sure what to do. Do you think I should try a custom rom? If so, for the sake of getting it to start, which is a good lightweight rom?
Does anyone know what I can do to make these infinite boot loops and/or "cannot mount cache" error go away?
Anyone? I could really do with some help..