i have Samsung Galaxy S5 G900L the Korean version , it was rooted and with custom Recovery , i wanted to flash a new kernel to it the kernel was suppose to support all Qualcomm Processor S5 phones , but it brick my phone and now it is opening on odin download mode and can't boot.
is there a way to fix it by flashing the stock kernel or any kernel that working on S5 G900L from odin so i don't lose my data
or i will have to download the whole firmware and flash it from odin and delete all my data :crying:
I don't have this version, but this article should get your back to 100% stock. Good luck!
http://www.androidofficer.com/2014/04/g900lklu1and3-android-442-klu1and3.html?m=1
Sent from my SM-G900P using XDA Free mobile app
i just want a working kernel for this version of samsung s5 coz i still cant boot into CM Recovery i installed before ... i dont want to lose my data
the solution
the stock kernel for samsung galaxy s5 G900L
if there is anyone has the stock version of this kernel without modding please share it ... as this version of kernel is modified and has problems like forgetting wifi networks passwords and it drains the battery faster
Related
Hi all
I desperately need help i have no idea what to do anymore. Yes i tried to root and rom my phone and i messed up now i cant get it back to just normal functionality.
I downloaded a custom rom and installed twrp 2.6 recover. I flashed a rom and when i started it i only noticed that it was for a Galaxy s2. I could not get out of the setup so it ran and failed. After that i have had the problem that the phone boots fine and goes into any app and has full
functionality until i set it down and the phone locks itself, then the lag is so huge i have to restart my phone to get anything done.
I have tried flashing the correct Omega v13 rom and does the same. Also dit the same with the backup that i made with TWRP before i did the first flash.
Also i tried to get it back to the stock firmware using the following guides.
DroidViews | How to Unbrick Your Bricked Samsung Galaxy S4 GT-I9500, GT-I9505, SCH-I545
How to Unroot and Restore Official Stock Firmware for Samsung Galaxy S4 GT-I9500 & GT-I9505 | WhatsWithTech.
I have flashed it and done every step correctly but when it boots the first time the whole touch screen doesnt react only the return and home keys work on first startup. If i restart the phone at this point (Just flashed stock firmware re partition with PIT file and new stock kernel) i can complete it but the same problem persists
Please tell me someone can help me fix this screwup.
I have a GT- I9500 Octacore international with Jellybean 4.2.2
This is the Samsung Galaxy S4 Active forum (meaning the I9295 International version/I537 US AT&T only model), not the Galaxy S4 (I9500/I9505/etc) forum which is located here:
http://forum.xda-developers.com/forumdisplay.php?f=2162
Good luck with the problem(s) you're having, however.
So I have a Note 4 SM-N910G Variant Currently running 5.1.1 Lollipop and I'm looking forward to root it since my warranty is over. (Snapdragon) I want to flash dr.ketan's rom ( http://forum.xda-developers.com/note-4/snapdragon-dev/n910g-dr-ketan-custom-rom-t2928568 ) but obviously I need to root my phone first.
I have researched through many youtube videos and website for Rooting and to my understanding, I need to download a kernel and flash a recovery called TWRP, flash SuperSU and then flash the ROM itself.
But so far, All I could find were kernels for other variants except N910G, some of them said that I can use the kernel for N910F ( http://forum.xda-developers.com/note-4/orig-development/tw-kernel-emotroid-team-t2990557 )
Can someone help me? And correct me if my understanding of the root procedure is wrong.
Really really really appreciated If you can help me
I tried to flash a kernal for SM-N910F 5.1.1 on my SM-N910G and it stopped my phone from booting (soft brick, got stuck on the first Samsung splash screen). I'm fairly certain that I did it correctly but I am new to Android so it might have been my mistake. I did get my phone working again by downloading the vanilla 5.1.1 SM-N910G firmware using SamFirm and installing it via Odin.
EDIT: I have successfully rooted my device using Noname Kernal http://forum.xda-developers.com/showpost.php?p=63217526
Mod Edit links removed
Thanks mate, do you know if M firmwares can be installed on the F version?
Seems crazy that the M version is the only one with 5.1.1.
can I install lollipop J11OM into J110G? thx fellas
Help please!
Hi
I'd like to know what does COD mean?
Galaxy J1 Ace SM-J110M COD J110MUBU0AOK2 5.1.1 03.11.2015 866717
Or please help me choose what ROM should I install on my J1.
Thanks!
oswade said:
Thanks mate, do you know if M firmwares can be installed on the F version?
Seems crazy that the M version is the only one with 5.1.1.
Click to expand...
Click to collapse
Nope wont work.
Whenever I try to boot this phone up this is the only thing which appears:Custom binary blocked by FRP lock. I also got into the Custom OS screen and downloading a target but other than that I had no luck. Custom Binary is Custom, System Status is Custom, FRP Lock is on. That is literally all there is. I tried Kies but that is only for stock Samsung phones not rooted and I tried to flash stock on the phone but Odin kept crashing on me. Help
Sent from my Nexus 5X using XDA-Developers mobile app
I used the files above but my phone is not rooted and it errors: failed whole signature
How root it?
For j1-sm-111m it is equal ?
My samsung SM-j100m wont enter recovery mode, I try flash cmw recovery true odin but still not enter.
I just bought a Samsung Note 4 SM-N910S. I thought is with Snapdragon, but CPU-Z says it's with Exynos5433. Which custom ROM should I use and what recovery mode?
I've searched for Samsung drivers, but couldn't find any that work.
Android version is 6.01.
Help?
Well, I found my own answer regarding Samsung Android drivers. The only version that works is 1.5.30.
Now I'll install TWRP 3.0.2.0 and then I'll try MIUI 7.
SOCRATE_MMXII said:
Well, I found my own answer regarding Samsung Android drivers. The only version that works is 1.5.30.
Now I'll install TWRP 3.0.2.0 and then I'll try MIUI 7.
Click to expand...
Click to collapse
TWRP 3.0.2.0 failed to install, even though Odin said „PASS!”, so I installed PhilZ. Then I installed MIUI 7 and eRobot, but on start both gave the same error: Kernel not being SEenforced.
Now I'm searching for a kernel that is SEenforced.
I'm downloading Sweet ROM 17.1 with kernel SE enforced....
Well, my hopes that 910C ROMs will work with 910S Exynos variant were shattered. So, I'm back to stock ROM 6.0.1. I will root it and remove KNOX (I don't care about warranty anyway) and try to remove as much bloatware as possible. I wish I knew how to build a custom ROM...
I've installed 6.0.1 using Odin 3.x. Next comes root!
I wish there was a custom ROM for SM-N910S...
The ROM from SK Telekom sux!!! I've rooted the phone and tried to remove all the bloatware, but I was unsuccessful, resulting into unusable ROM.
I've found a tutorial to install a debloated stock ROM from SM-N910C based on android 5.1.1 which is a much better option than the original ROM. Not to mention the permission levels for 6.0.1 are messed up really bad, imho.
The ROM from SK Telekom sux!!! I've rooted the phone and tried to remove all the bloatware, but I was unsuccessful, resulting into unusable ROM.
I've found a tutorial to install a debloated stock ROM from SM-N910C based on android 5.1.1 which is a much better option than the original ROM. Not to mention the permission levels for 6.0.1 are messed up really bad, imho.
Just a friendly reminder : make a full backup before installing any ROM.
I think.....if you have modem file of 910S, you can try to flash custom ROM for 910C/H and the flashed your modem, and maybe it will work.
I'm on 910H, and that is the trick that we use to flash 910C ROM.
but please explore xda some more, maybe someone already tried it and succeed/failed.
@cacingbesar: I don't care about backups on phones, because I don't have any important data on them. The only thing I backup is the contact list.
Moving on with my saga...
I was thinking that maybe there's a way of converting my SM-N910S to SM-N910C, because at HW they are basically the same so I've started searching the net and found an interesting video on youtube on an indian guy who did just that on 5.1.1.
So, I followed his tutorial and installed his ROM which is debloated, de-knoxed and rooted which I very much prefer over the crappy SK ROM.
I've learned the trick of this is to use SM-N910C ROM, but flash the modem from SM-N910S. I wish I knew how to extract the modem from the stock SM-N910S and to inject it into custom ROMs.
Even though SM-N910S and SM-N910C are HW identical, a custom ROM made for SM-N910C doesn't work on SM-N910S. Why is that? I have no idea...
@cacingbesar: I don't care about backups on phones, because I don't have any important data on them. The only thing I backup is the contact list.
Moving on with my saga...
I was thinking that maybe there's a way of converting my SM-N910S to SM-N910C, because at HW they are basically the same so I've started searching the net and found an interesting video on youtube on an indian guy who did just that on 5.1.1.
So, I followed his tutorial and installed his ROM which is debloated, de-knoxed and rooted which I very much prefer over the crappy SK ROM.
I've learned the trick of this is to use SM-N910C ROM, but flash the modem from SM-N910S. I wish I knew how to extract the modem from the stock SM-N910S and to inject it into custom ROMs.
Even though SM-N910S and SM-N910C are HW identical, a custom ROM made for SM-N910C doesn't work on SM-N910S. Why is that? I have no idea...
SOCRATE_MMXII said:
@cacingbesar: I don't care about backups on phones, because I don't have any important data on them. The only thing I backup is the contact list.
Moving on with my saga...
I was thinking that maybe there's a way of converting my SM-N910S to SM-N910C, because at HW they are basically the same so I've started searching the net and found an interesting video on youtube on an indian guy who did just that on 5.1.1.
So, I followed his tutorial and installed his ROM which is debloated, de-knoxed and rooted which I very much prefer over the crappy SK ROM.
I've learned the trick of this is to use SM-N910C ROM, but flash the modem from SM-N910S. I wish I knew how to extract the modem from the stock SM-N910S and to inject it into custom ROMs.
Even though SM-N910S and SM-N910C are HW identical, a custom ROM made for SM-N910C doesn't work on SM-N910S. Why is that? I have no idea...
Click to expand...
Click to collapse
You can find some thread about how to extract modem from a stock rom. Or google it.
No....I'm not worrying your data, I worry that you lost your efs/imei, that would cost you dearly.
I'm using CWM as recovery and I don't think it's messing up with EFS/IMEI, nor does Odin3 as long as I don't tick the boxes I don't need.
Later Edit: this ROM is AMAZING!!!
SOCRATE_MMXII said:
I'm using CWM as recovery and I don't think it's messing up with EFS/IMEI, nor does Odin3 as long as I don't tick the boxes I don't need.
Later Edit: this ROM is AMAZING!!!
Click to expand...
Click to collapse
In „ODIN mode” says KNOX 1, but who cares...I like this ROM a lot.
I wish I'd be able to use eRobot ROM the same way...
SOCRATE_MMXII said:
I'm using CWM as recovery and I don't think it's messing up with EFS/IMEI, nor does Odin3 as long as I don't tick the boxes I don't need.
Later Edit: this ROM is AMAZING!!!
Click to expand...
Click to collapse
In „ODIN mode” says KNOX 1, but who cares...I like this ROM a lot.
I wish I'd be able to use eRobot ROM the same way...
Hello, what Custom ROM/Recovery did you later find for your N910s?
I have the same device!
I am also bought by mistake the korean version of Note 4 N910S ... the is no rom for it only the fermware in samsung web ..... its a dream for me to convert it to N910C .. and get rid of this headache
Fix
SOCRATE_MMXII said:
TWRP 3.0.2.0 failed to install, even though Odin said „PASS!”, so I installed PhilZ. Then I installed MIUI 7 and eRobot, but on start both gave the same error: Kernel not being SEenforced.
Now I'm searching for a kernel that is SEenforced.
Click to expand...
Click to collapse
I had same problem,so i reflashed CF-Auto root via Odin 10 ....FIXED
https://forum.xda-developers.com/note-4/general/tutorialhow-to-flash-n910c-rom-korean-t3663053
Hope this help
Hi, I have a N900W8 (Canada) and I am in Lollipop. I am looking for the Marshmallow bootloader & modem for N900W8.
Also, im looking to root my phone other than the cf auto root method. Because after flashing the cf-autoroot for n900w8, my buttons stopped working.
Thank you.
There is no marshmallow bootloader or modem.
You can flash SuperSU from twrp.
What bootloader/modem can I use for a marshmallow rom?
Just use the latest LP bootloader and modem.
audit13 said:
Just use the latest LP bootloader and modem.
Click to expand...
Click to collapse
I thought it should be a marshmallow bl/cp for a marshmallow rom. Didnt know i can use a lollipop.
And for the supersu, i just need to flash twrp then flash supersu from chainfire website?
Thank you.
There is no MM bootloader and modem because Samsung never released a MM build for the Note 3.
Yes, just flash twrp and Chainfire's supersu.
@audit13 do you know how to get the modem and bootloader from a stock firmware (tar.md5) ?
Not sure if you can extract it from a stock rom but it may be easier to just flash the entire rom in Odin.
audit13 said:
Not sure if you can extract it from a stock rom but it may be easier to just flash the entire rom in Odin.
Click to expand...
Click to collapse
Okay, I'll do that. Also, do you know what custom kernel is compatible with stock rom N900W8VLU2DPG1 ?
AFAIK, there is no custom kernel that is compatible with the stock Samsung ROM because the Samsung Note 3 apps require a Samsung kernel.
Hi.
Hi, sorry to make it alive. I have a Canadian Samsung Note 3 with (bell mobility) carrier. And, I'm searching to root my phone for removing bloatware and pushing the power out. But and completely newb, and no idea where to start. I have try towelroot and Kings with no success.
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Suggest rooting with .
SR1-SuperSU-v2.78-SR1-20160915123031 .Its a zip file use Philz recovery or TWRP to flash .
audit13 said:
AFAIK, there is no custom kernel that is compatible with the stock Samsung ROM because the Samsung Note 3 apps require a Samsung kernel.
Click to expand...
Click to collapse
There is a custom kernel for stock note3 lolipop firmware which is called lean kernel, idel kernel, ater97 kernel and shinto kernel.... Do ur research before saying thinks u don't knw about ok bro.
@jgun007, I said "AFAIK", I never said there wasn't a kernel for the Canadian note 3 sm-n900w8 which is the model referred to in the subject line of this thread and discussed in this thread.
I see that lean kernel is for the n900t (T-mobile note 3) which is not the same model as the Canadian note 3: https://forum.xda-developers.com/showthread.php?t=2488233
I see idel kernel here but I don't see the Canadian note 3 model listed as being compatible: https://forum.xda-developers.com/ga...nt/kernel-idlekernel-leankernel-fork-t3241582
I see arter kernel here for the n9005 which is not the same model # as the Canadian note 3: https://forum.xda-developers.com/galaxy-note-3/development/arter97-kernel-galaxy-note-3-t3028148
I see the thread for the shinto kernel was closed and the last post was in January 2015, about 2 years ago and I didn't see any mention of compatibility with the n900w8: https://forum.xda-developers.com/galaxy-note-3/help/shinto-kernel-t2895089
Hi.
Anybody know why, I'm searching with my phone information... I found nothing.
Model number sm-n9000w8
Version 5.0
Band n900w8vlu2dpg1
Number version lrx21v.n900w8vlu2dpg1
What do you want to know about your phone? The model # is sm-n900w8. I noticed you had three zeros in your post.
Looks like your phone is running the latest stock ROM according to sammobile.com: https://www.sammobile.com/firmwares/database/SM-N900W8/
audit13 said:
What do you want to know about your phone? The model # is sm-n900w8. I noticed you had three zeros in your post.
Looks like your phone is running the latest stock ROM according to sammobile.com:
Click to expand...
Click to collapse
Yes, is a stock device. Never rooted. And it's a mess for the 0 in over.
I have all my information but when I'm searching for rooting... I found nothing and no procedure for someone who have a cellular like mine. N900W8VLU2DPG1.
What's wrong with using TWRP recovery ??
JJEgan said:
What's wrong with using TWRP recovery ??
Click to expand...
Click to collapse
Probably nothing, I don't know what is twrp.
You can root using cfautoroot and Odin.