Hi,
when i open my wizard to show the keyboard, i noticed that the screen is put into landscape mode just before some switch is activated.
When i fully open the screen since yesterday my right upper part of the screen seems not to work anymore. So i can not use the OK button, the sound volume, etc. My Start button is working.
Also the calendar is automatically started when i open up the keyboard.
When i put back the screen to portait mode just a tiny bit (just after the locking and before the screen goes to portrait mode) the screen starts working like it is supposed to be in landscape mode eg. all buttons are working again?
Hallo!
Does anyone know the fastest and easiest way to change the display between Landscape and Portrait mode ?
Sometimes when I pickup my device from my Pocket, I notice that the display is on "Landscape" mode, but after I hold it in my hand it turns back to normal (Portrait mode), what causes that ?
Thanks in Advance!
I'm not sure what causes your phone to go into landscape when it's in your pocket but the easiest way to get it back (aside from sliding to expose the keyboard and closing it) is to assign one of your buttons to rotate your screen. In your buttons menu there is a "rotate" option. I changed my messaging button (Upper left corner) to rotate my screen when pressed.
If you use the original case that comes with the MDA VARIO sliding it out of the case causes this rotation. This happens when the PDA is active ( for example an incoming call ), the magnet in the case somehow causes the rotation when you pull it out.
Its weird, but many people experience it - I don't use the case at all and never had such problems.
If you can afford to lose a hardware button then you can assign either Rotate Screen Left or Rotate Screen Right to one through Start -> Settings -> Buttons
Thank you all for your helpful replies.
And yeah DREAMBOXER, you are right, I am using the case that came with the device... I never thought that the magnet causes that. OK is it bad and will harm my device with the time or it is just normal and nothing bad will happen if I continue using this case ?
it won't damage it
it's just the keyboard sensor is a magnet as well
I guess probably a lot of people here have the auto rotate app installed. it make the screen go landscape at anytime when you rotate the phone, even with lock screen.
I noticed that if i turn off the phone(or go to sleeping mode), then rotate the phone, then click any buttom, the screen comes on in landscape mode!! !!!
This means even when it is in sleep mode the app is still working!! So if you put it in your pocket walking or something, it may have rotated itself hundreds of times!!!!!
What i want say is, if there's any program running when you turn it off, they may be still running in sleeping model???
No, it does not mean that. It only means, that when the key is pressed, before the screen is turned on, the orientation is detected and screen refreshed.
There are several levels of sleep mode. Generally in sleep mode everything which can be turned off is turned off. If no application is working at the moment (all applications wait for input), even the CPU should be on standby.
GSM module is usually on.
But if some application is running, and you enter sleep mode, it is not really sleep mode, only screen is off. WM do not suspend running applications.
They can however close data connection and AFAIK HD2 is configured that way. But it can be changed in the registry, and on my X1 it is not like that (only WIFI is turned off). So for example if I run skype, and then 'sleep' the device, it runs, and it communicates, and it can eat battery in few hours.
Which applications runs and when, if the G-sensor is on, or if the lock screen is drawn and refreshed, it is really hard to tell. I guess some software for this might exist, but I don't know about it.
asdadbz said:
I guess probably a lot of people here have the auto rotate app installed. it make the screen go landscape at anytime when you rotate the phone, even with lock screen.
I noticed that if i turn off the phone(or go to sleeping mode), then rotate the phone, then click any buttom, the screen comes on in landscape mode!! !!!
This means even when it is in sleep mode the app is still working!! So if you put it in your pocket walking or something, it may have rotated itself hundreds of times!!!!!
What i want say is, if there's any program running when you turn it off, they may be still running in sleeping model???
Click to expand...
Click to collapse
Following your logic, It should come back in portrait mode if the device was sleeping and you hold it up vertically. So the fact that it wakes up in landscape mode means that the device was not in completely in standby when you did rotate it.
first the sleeping mode or 'turn off' mode i mean is pressing the 'hang up' buttom. The software is called Gryator 2
What I found was, when the phone is on, if I rotate the phone there is approx 1 sec delay. But if I rotate the screen in sleeping mode and then press any buttom few seconds later, the screen comes on instantly as normal and is in landscape. If it is as per you said, there woud be a 1 sec delay, woundn't it?
And also if listeniing to music, press the the 'hang up' bottom, the music stays. I had a XDAIIi, very old.. if press the on/off buttom, music won't stay. i had to just turn of the screen.
This make me wonder, what stays on, what gos off in the sleeping mode.
As HD2 does not have the true 'on/off' buttom like the XDA IIi where all the PDA application is literally turned off.....
Xeon said:
Following your logic, It should come back in portrait mode if the device was sleeping and you hold it up vertically. So the fact that it wakes up in landscape mode means that the device was not in completely in standby when you did rotate it.
Click to expand...
Click to collapse
yes, correct!! Vise versa, I tried both....
So it does start in landscape every time ? I guess I still don't get it ..
hi,
i use changescreen to rotate, and have the same isue. eg.
1. have the device in portrait and switch it of
2. then (screen is off) turn it to landscape for a while
3. after that turn it back to portrait and immediately turn on the screen
i see the screen in landscape and then after some delay turning to portrait. you can proof this by telling the program to delay the rotation for some sec., wich is my default setting. i used gsen, changescreen and gyrator (gsen only on my old advatage) and they all behave the same.
mad.
Dr.Sid said:
So it does start in landscape every time ? I guess I still don't get it ..
Click to expand...
Click to collapse
Basicly if you rotate the phone, there is a small delay for the screen to rotate. when you rotate the phone in sleep mode and wait 2 seconds then turn on the screen, it comes on instantly and is rotated already. This means the 'screen rotation' has been already done when it is on sleeping mode. Otherwise the screen should be on as what it was before and then rotate with the small delay.
So if the rotation program is working in sleeping mode, other programs could be working as well? !!!
It isn't really sleep mode. There is (as mentioned above) no suspended mode for WM.
Most running apps won't actually be doing anything though, because you're not making them do anything. Obviously, the usual form of user interaction is via the screen. In sleep mode, this isn't happening, so most apps will just sit there waiting. Anything that runs periodically, or reacts to other events (such as orientation changes) will still do what it does when the phone is not in sleep mode.
Basically, the screen is turned off. That's it.
OK I've had this happen to me for at least three days now and it's finally to the point where I'm posting to see if anyone else has experienced it. I use the Vega in landscape virtually all the time and because of that I lock it in that orientation. However, once or twice an hour the screen will briefly flip to portrait (power button would be on the left in that orientation) then back to landscape. It's very brief and as I said it flips back just as quickly but it's very annoying. It has happened while watching videos too which is more annoying as it takes longer than a browser to change orientation while playing.
I've tried recalibrating it, rebooting the tablet and everything short of reflashing the ROM. I'm really hoping to avoid reflashing to test it as I've finally got the screen calibrated to an almost perfect level thanks to the other calibration app on the MoDaCo forums. Has anyone else had this behaviour before? If so, have you found a fix?
I do not have your exact problem but something similar. Just now I picked mine up and screen was upside down (when the device was right side up i.e. buttons at top and right). I checked the rotation button and it was not locked. When I rotate the device it will not switch rotation at all - when I go into settings and turn off auto-rotation it flips right-side up. It seems like the accelerometer is knackered but it would seem to be working in order to flip it when auto-rotation is switched off. The daft thing is that in various screens it flips to being right side up. It boots up the right way round and the lock screen is the right way round but as soon as unlocked it flips upside down. I too have tried rebooting and all sorts - thinking of flashing it as a last resort.
I seem to have fixed this now. I use quickboot and on a whim rather using my reboot shortcut I used power off. I then used the power button to start up with the rotation lock switched on - when I turned it off once booted it was back to normal. I suspect the rotation switch bit was a red herring - I reckon the shutdown/restart fixed it.
settngs>g sensor>games mode can cause some accelerometer antics try turning on and off
What does the gsensor mode do when activated, as I haven't seen any difference?
Hi,
I experienced today a strange behavior:
I used my nook, turn off wifi, let it in my bag for 1 or 2 hours and when i tried to wake it the screen didn't turn on.
At first i though it was SOD but when i looked closer to the screen there was something on it, it was the CM7 boot logo (the tony hawks droid
The logo was not very visible, most like old "ghost image" on CRT screen when he same image is displayed for long periods of time.
I should have taken a photo, i will if it reproduce.
Kinda sounds like it was rebooting without turning on the backlight. Could you see the arrow circling? I've had "n" turn on the backlight with no image, but tapping power turns off the backlight, then tapping it again turns the screen on properly.
Sounds like somebody's state machine has a leak...
i will never know (i pressed power 8s, if it was booting, i just stopped it)