HI guys,
I wonder if the AllShare cast dongle is working in Custons roms? or if there is already a solution???
Hello everybody yesterday i received my mojo. Console Works great but the control don't pair with the usb dongle in de mojo. PC and MAC recognise the usb but don´t pair..
However the control pairs perfect without using dongle in Galaxy s4, with the dongle don´t work. Any suggestion? There are any bt dongle compatible with mojo and ctrlr?
Thanks in advance. Regards!
davirofe said:
Hello everybody yesterday i received my mojo. Console Works great but the control don't pair with the usb dongle in de mojo. PC and MAC recognise the usb but don´t pair..
Click to expand...
Click to collapse
If I understand you correctly, make sure the BT dongle included with the mojo is on the USB3 (blue) port.
Try turning BT on in android setup.. not sure why that would help, but just in case there's been an update..
davirofe said:
However the control pairs perfect without using dongle in Galaxy s4, with the dongle don´t work. Any suggestion? There are any bt dongle compatible with mojo and ctrlr?
Thanks in advance. Regards!
Click to expand...
Click to collapse
If that didn't work, raise a support request with madcatz, probably a busted USB Dongle, (it should work fine on PC/android/ect, MAC i think might need drivers)
You can pair the mojo CTRLR to your galaxy without the dongle?? wow!
Man, I'm hoping it's a firmware fix coming
Also: There are any bt dongle compatible with mojo and ctrlr?
TMK, The dongle isn't actually BT, so I doubt there would be an alternative out there.
gwaldo said:
If I understand you correctly, make sure the BT dongle included with the mojo is on the USB3 (blue) port.
Try turning BT on in android setup.. not sure why that would help, but just in case there's been an update..
If that didn't work, raise a support request with madcatz, probably a busted USB Dongle, (it should work fine on PC/android/ect, MAC i think might need drivers)
You can pair the mojo CTRLR to your galaxy without the dongle?? wow!
Man, I'm hoping it's a firmware fix coming
Also: There are any bt dongle compatible with mojo and ctrlr?
TMK, The dongle isn't actually BT, so I doubt there would be an alternative out there.
Click to expand...
Click to collapse
Yes, i plug the dongle on the USB3 of the mojo, but the controller doesn't pair.
Turning on the Bluetooth of the mojo doesn't detect the controller
in galaxy s4 with stock kitkat and without dongle the controller pair and works fine.
If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair.
Only pair without dongle and with bt 4.0 devices....... I'm confused.
Thanks for you answer man!
davirofe said:
Yes, i plug the dongle on the USB3 of the mojo, but the controller doesn't pair.
Turning on the Bluetooth of the mojo doesn't detect the controller
in galaxy s4 with stock kitkat and without dongle the controller pair and works fine.
If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair.
Only pair without dongle and with bt 4.0 devices....... I'm confused.
Thanks for you answer man!
Click to expand...
Click to collapse
What model# is it?
My MOJO CTRLR is 32263 and my the retail CTRLR : 32266.
Maybe different firmware, I would raise a ticket with Madcatz, with a link to this thread.
"If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair."
Is that with the MOJO dongle, it works with a BT4 keyboard?
I hope it's a new firmware release for both CTRLR and MOJO :fingers-crossed:
Does the blue light come on the CTRLR?
Try holding down the start button for a few seconds, the light should go red'ish then try to repair.
That's very strange, did you check that both USB ports on the MOJO work?
I'm guessing it's a firmware issue or a dongle issue.
gwaldo said:
What model# is it?
My MOJO CTRLR is 32263 and my the retail CTRLR : 32266.
Maybe different firmware, I would raise a ticket with Madcatz, with a link to this thread.
"If i power off the bt on sgs4 and connect the dongle with otg USB phone detect new keyboard connected but controller doesn't pair."
Is that with the MOJO dongle, it works with a BT4 keyboard?
I hope it's a new firmware release for both CTRLR and MOJO :fingers-crossed:
Does the blue light come on the CTRLR?
Try holding down the start button for a few seconds, the light should go red'ish then try to repair.
That's very strange, did you check that both USB ports on the MOJO work?
I'm guessing it's a firmware issue or a dongle issue.
Click to expand...
Click to collapse
My controller is the same
The CTRLR DONGLE is :43710
When i connect the dongle of the mojo to the phone detect new keyboard, but nothing works, controller doesn't pair and i don't try with bt keyboard. I think dongle fail...,
When pair without dongle to S4 the light is blue and works well
When i try the same with the dongle in the mojo, pc or Mac reconigse the dongle well(drivers install perfect) but the light of the controller is blinking red/blue and doesn't works
If i press start button 5 seg light change purple and after blink again red/blue (pair mode) but doesn't pair
The USB ports of the mojo also well fine i plug Xbox 360 controller and mouse to set up the system
Thanks for your help!
davirofe said:
My controller is the same
The CTRLR DONGLE is :43710
When i connect the dongle of the mojo to the phone detect new keyboard, but nothing works, controller doesn't pair and i don't try with bt keyboard. I think dongle fail...,
When pair without dongle to S4 the light is blue and works well
When i try the same with the dongle in the mojo, pc or Mac reconigse the dongle well(drivers install perfect) but the light of the controller is blinking red/blue and doesn't works
If i press start button 5 seg light change purple and after blink again red/blue (pair mode) but doesn't pair
The USB ports of the mojo also well fine i plug Xbox 360 controller and mouse to set up the system
Thanks for your help!
Click to expand...
Click to collapse
My dongle model is the same.. strange that it still works on PC/Mac (loading drivers) :/ dont know sorry...
Even with a BT4 USB adaptor, I doubt it would work on the MOJO because android 4.3 doesn't support BT4.
Raise a support ticket on the madcatz site.
that's a bummer, hope you get it fixed soo.
Same Problem here, Mojo paired with my phone but not with the controller. But the Controller works fine with my Nexus 5.
Same problem here. MOJO support doesn't seem to be much help other than disconnect it and reconnect but I can't even get it to pair. Anyone found resolution for this?
I also have the same problem, would installing a lower firmware help?, mine came with the 4k res and ouya update out of box, if I install lower firmware would that solve my dongle problem?
Thanks
laywaste said:
I also have the same problem, would installing a lower firmware help?, mine came with the 4k res and ouya update out of box, if I install lower firmware would that solve my dongle problem?
Thanks
Click to expand...
Click to collapse
No, don't bother.
FYI: @Coolin82 @rmraiden
TMK, the only thing you can do is install the lollypop custom rom, it doesn't need the dongle and pairs fine without it.
See the development forum.
Wow! That's really strange, I use the dongle on my PC(linux/XP) and mojo.. never had issues it, it just works.
Mine is now working. Mad Catz RMA'd my controller and sent me the new CTRL that doesn't require a dongle. Gaming is so much better now!! :laugh:
Oh nice, you got a retail version.. it has BT2 and BT4 that's why you don't need the dongle.
any solution ?
I recently bought an Anker USB hub with gigabit ethernet and connected it to an OTG cable. My (unrooted stock) Nexus Player picks up the ethernet interface right away and works perfectly... except for casting from my phone. My phone sees the Nexus Player as a target to cast to, but video never plays. If I disconnect ethernet and re-connect my Nexus Player via WiFi it works fine.
Anyone else have this problem?
gotroot801 said:
I recently bought an Anker USB hub with gigabit ethernet and connected it to an OTG cable. My (unrooted stock) Nexus Player picks up the ethernet interface right away and works perfectly... except for casting from my phone. My phone sees the Nexus Player as a target to cast to, but video never plays. If I disconnect ethernet and re-connect my Nexus Player via WiFi it works fine.
Anyone else have this problem?
Click to expand...
Click to collapse
Once connection through Ethernet is established, wireless is automatically disabled.
gotroot801 said:
I recently bought an Anker USB hub with gigabit ethernet and connected it to an OTG cable. My (unrooted stock) Nexus Player picks up the ethernet interface right away and works perfectly... except for casting from my phone. My phone sees the Nexus Player as a target to cast to, but video never plays. If I disconnect ethernet and re-connect my Nexus Player via WiFi it works fine.
Anyone else have this problem?
Click to expand...
Click to collapse
It could possibly be your specific adapter. Like sam.balia1012 said, when you plug up an ethernet adapter, it disables your wi-fi. however, even though I have the Inatek ethernet adapter, I am still able to tab cast or chromecast things from my phone to my Nexus Player while in ethernet mode without having to switch on wi-fi.
Hi everyone,
Does anyone use this phone with a Pioneer headunit?
I'm looking to buy a Pioneer AVH-X3700DAB which says appradio mode can work with just the USB cable plugged in. (I would obviously have to use the USB-A to USB-C cable)
Does anyone run this setup or know if it'll work?
Thanks
I have the DA100t(or whatever model) appradio head unit and i cannot plug mine in and have it work.
3700 is a mirrorlink head unit so you need to look for that support, not personally looked at it as mine is an HDMI model.
DA100 is Appradio 2 and is an HDMI model. The 6P does not have HDMI out through MHL / Slimport so you can't use a cable. You can by default use Chromecast as the casting mechanism, or with a modification to the build.prop a miracast dongle.
I am using a Microsoft Wireless Adapter which is Miracast and it is working fine.I also use Appradio Unchained Reloaded so I get full screen mirroring with touch, not just the limited apps Pioner want you to use.
ARUR works with hdmi appradio devices (requires root) but does not work with mirrorlink appradio devices which are restricted to the poor Pioneer implementation and choice of apps.
400ixl said:
3700 is a mirrorlink head unit so you need to look for that support, not personally looked at it as mine is an HDMI model.
DA100 is Appradio 2 and is an HDMI model. The 6P does not have HDMI out through MHL / Slimport so you can't use a cable. You can by default use Chromecast as the casting mechanism, or with a modification to the build.prop a miracast dongle.
I am using a Microsoft Wireless Adapter which is Miracast and it is working fine.I also use Appradio Unchained Reloaded so I get full screen mirroring with touch, not just the limited apps Pioner want you to use.
ARUR works with hdmi appradio devices (requires root) but does not work with mirrorlink appradio devices which are restricted to the poor Pioneer implementation and choice of apps.
Click to expand...
Click to collapse
How do you setup your phone with your headunit. I just got a SPH-DA120 and Microsoft Wireless Adapter
With the Pioneer app?
400ixl said:
3700 is a mirrorlink head unit so you need to look for that support, not personally looked at it as mine is an HDMI model.
DA100 is Appradio 2 and is an HDMI model. The 6P does not have HDMI out through MHL / Slimport so you can't use a cable. You can by default use Chromecast as the casting mechanism, or with a modification to the build.prop a miracast dongle.
I am using a Microsoft Wireless Adapter which is Miracast and it is working fine.I also use Appradio Unchained Reloaded so I get full screen mirroring with touch, not just the limited apps Pioner want you to use.
ARUR works with hdmi appradio devices (requires root) but does not work with mirrorlink appradio devices which are restricted to the poor Pioneer implementation and choice of apps.
Click to expand...
Click to collapse
This! ARUR works great with appradio3 and ms miracast adaptor.
400ixl said:
With the Pioneer app?
Click to expand...
Click to collapse
Your hole set-up process. I have the SPH-DA120 and just bought the Microsoft Miracast I managed to get it to pair today but the cast quality seems pants compared to other examples on the internet. Any suggestion
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
Andrewbud said:
This! ARUR works great with appradio3 and ms miracast adaptor.
Click to expand...
Click to collapse
How do you find your screen quality when casting on miracast mine dont seem that good. You got a pic of yours on?
MRL3GS said:
Your hole set-up process. I have the SPH-DA120 and just bought the Microsoft Miracast I managed to get it to pair today but the cast quality seems pants compared to other examples on the internet. Any suggestion
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
How do you find your screen quality when casting on miracast mine dont seem that good. You got a pic of yours on?
Click to expand...
Click to collapse
No I do not. Its a low res pos screen. Don't expect too much. Maybe try a different home screen launcher
Try changing DPI settings
About to set up my nexus 6p on my appradio 2 using the microsoft dongle. If anyone is monitoring this thread and has any setup tips, please feel free to respond. Thanks.
Root, modify build.prop, enable wiring casting and setup. Using the paid alpha version can automate the cast process.
400ixl said:
Root, modify build.prop, enable wiring casting and setup. Using the paid alpha version can automate the cast process.
Click to expand...
Click to collapse
Hi,
Can you please provide more details on how you did it?
I have a rooted 6p with cast enabled. How to enable mirrorlink. I have a honda CRV.
Which paid software are you talking about?
thanks
I'm trying to connect my wireless Xbox 360 controller with a otg usb cable. But the lights from the gamepad are just flashing and that's it.
I can't navigate through the menu at all.
I guess it has something to do with the bindings.
Does someone here know how to do this with the s6e+?
The otg adapter is working nicely it's no problem to connect a mouse or a keyboard to it.
I'm currently running the latest Audax rom with it's kernel. (MM 6.0.1)
Edit: OK there's definitely a file that's missing. The keylayout for the wireless 360 controller isn't there. Does someone know how to add this?
Luna447 said:
I'm trying to connect my wireless Xbox 360 controller with a otg usb cable. But the lights from the gamepad are just flashing and that's it.
I can't navigate through the menu at all.
I guess it has something to do with the bindings.
Does someone here know how to do this with the s6e+?
The otg adapter is working nicely it's no problem to connect a mouse or a keyboard to it.
I'm currently running the latest Audax rom with it's kernel. (MM 6.0.1)
Edit: OK there's definitely a file that's missing. The keylayout for the wireless 360 controller isn't there. Does someone know how to add this?
Click to expand...
Click to collapse
Wireless 360 controller ok.
So you are using the wireless PC USB 360 reciever in your phone? Else it wont work.
And for godssake use the damn search this has been asked multiple times.