Hey guys
Can I unlock my note 4 if I flash a different Csc based firmware on it?
So, I managed to enter the ServiceMode, by:
On this particular model, you have to do this:
Go to dial pad and enter: *#0011#
This will initially take you to Service Mode and showing you
various signal status items, by default. But it's a locked
entry. So to unlock and go to the Main Menu do this:
==> [MENU] + [Back]
==> [MENU] + [Key Input] + "Q"
==> [MENU] + [Key Input] + "0000"
==> <wait ~5-10 seconds>
Click to expand...
Click to collapse
But after this I just can't find the following:
Code:
UMTS MAIN MENU
[1] DEBUG SCREEN.
[6] PHONE CONTROL.
[6] NETWORK LOCK
[3] PERSO SHA256 OFF
Go Back to Main Menu
UMTS MAIN MENU
[6] COMMON
[6] NV REBUILD.
[4] Restore Back-up.
Reboot
Can anybody help?
If it's network/sim locked you will need the unlock code either from your carrier or a 3rd party websites
sawdoctor said:
If it's network/sim locked you will need the unlock code either from your carrier or a 3rd party websites
Click to expand...
Click to collapse
Like which websites? I've been searching through the internet, but found none. My model numer is SM-N910F.
jaszfalvi.tamas said:
Hey guys
Can I unlock my note 4 if I flash a different Csc based firmware on it?
Click to expand...
Click to collapse
Nope, you cannot unlock just by flashing another firmware.
---------- Post added at 04:48 PM ---------- Previous post was at 04:47 PM ----------
jaszfalvi.tamas said:
So, I managed to enter the ServiceMode, by:
But after this I just can't find the following:
Code:
UMTS MAIN MENU
[1] DEBUG SCREEN.
[6] PHONE CONTROL.
[6] NETWORK LOCK
[3] PERSO SHA256 OFF
Go Back to Main Menu
UMTS MAIN MENU
[6] COMMON
[6] NV REBUILD.
[4] Restore Back-up.
Reboot
Can anybody help?
Click to expand...
Click to collapse
Please read this post.
So, does anyone know a good and trustworthy unlock service? As far as I have seen on the sammobile website, they don't support yet the SM-N910F...
Related
Hi,
Got this spaking i9505 s4, but it seems the *#197328640# service mode is missing, im using this mode to select wcdma band, In my S2 it is there.
Did samsung removed : *#197328640#, if yes how do we access wcdma select band?
Also *#2263# is not working
Thanks,
Roy
Same problem here!
Service mode:
*#0011#
Options*--> back
Options -->key input -->1
Black screen with number 1 up on the left
buy samsung service mode apk
buy samsung service mode apk from the play store
bernny26 said:
buy samsung service mode apk from the play store
Click to expand...
Click to collapse
Service mode is not working, I can get in to what says service mode but then back does not work abd it stuck in some sort active data mode.
docurley said:
Service mode is not working, I can get in to what says service mode but then back does not work abd it stuck in some sort active data mode.
Click to expand...
Click to collapse
I did read that its modem related?
this post says so?
http://forum.xda-developers.com/showpost.php?p=42550422&postcount=3539
rodnah said:
I did read that its modem related?
this post says so?
http://forum.xda-developers.com/showpost.php?p=42550422&postcount=3539
Click to expand...
Click to collapse
Well I tried the modem reflash and still no Service mode just the same old screen shot each time.
docurley said:
Well I tried the modem reflash and still no Service mode just the same old screen shot each time.
Click to expand...
Click to collapse
Did you manage to solve this? I'm stuck at the same point. Menu -> back doesn't do anything at all.
TY
squaredd said:
Did you manage to solve this? I'm stuck at the same point. Menu -> back doesn't do anything at all.
TY
Click to expand...
Click to collapse
No I did not I ended up selling the phone as I wanted to change networks but I could not unlock the pjone.
Ei.. any fix for this?
i BELIEVE this is part of Samsung's "business strategy".. i was resolve this using the Samsung Service Mode apk (which I cracked and patched :highfive, however i have another issue related to this (see attached pic)!
In this case...may i ask if anyone from XDA knows the secret code for the UMTS Menu for me to access the Network Unlock menu???
RESOLVED thru SERENDIPITY!
mrryanangeles16 said:
i BELIEVE this is part of Samsung's "business strategy".. i was resolve this using the Samsung Service Mode apk (which I cracked and patched :highfive, however i have another issue related to this (see attached pic)!
In this case...may i ask if anyone from XDA knows the secret code for the UMTS Menu for me to access the Network Unlock menu???
Click to expand...
Click to collapse
Hi XDA Peeps!
I was able to unlock my i9505!
I just did the following steps:
1. Dial *#0011# via Phone Utility apk [Phone Connectivity Status will appear (via Service Mode)];
2. Tap on the left soft key (LSK) and select Key Input > Enter 1 > Hit OK;
3. Tap on the LSK and select BACK [You're now just a few steps away!];
4. Tap on the LSK and select Key Input > Enter 1 > Hit OK [Your screen shall have a different output now (i.e., a single digit "1" on line 1)];
5. WAIT for 5 seconds until the UMTS MAIN MENU appears > Select Debug Screen > Select Phone Control > Select Network Lock;
6. Next, tap on: [3] PERSO SHA256 OFF;
7. From here, go back to the UMTS MAIN MENU by tapping on Menu (left soft key on SGS4) and selecting Back from the options;
8. Once you are in the UMTS menu, tap on: [6]COMMON;
9. There, select: [6]NV REBUILD;
10. Now in the NV Rebuild menu, tap on: [4] Restore Back-up;
11. Samsung Galaxy S4 will now go into a temporary freezing state. After a while you’ll see some activities. The screen will be black and the LED will turn Blue. The Menu and Back key button on phone will also light;
12. Lastly, your Samsung Galaxy S4 will reboot automatically and will take a minute or two in booting up (depending on your ROM's Boot Animation);
BOOM! Your Galaxy S4 GT i9505 is now SIM-unlocked! Try a SIM card from another carrier to confirm the process and do not forget to share this to your friends too!
XDA_AndioAngeles
FB: facebook.com/rmasr.angeles
Does not work on samsung secure boot devices
mrryanangeles16 said:
Hi XDA Peeps!
I was able to unlock my i9505!
I just did the following steps:
1. Dial *#0011# via Phone Utility apk [Phone Connectivity Status will appear (via Service Mode)];
2. Tap on the left soft key (LSK) and select Key Input > Enter 1 > Hit OK;
3. Tap on the LSK and select BACK [You're now just a few steps away!];
4. Tap on the LSK and select Key Input > Enter 1 > Hit OK [Your screen shall have a different output now (i.e., a single digit "1" on line 1)];
5. WAIT for 5 seconds until the UMTS MAIN MENU appears > Select Debug Screen > Select Phone Control > Select Network Lock;
6. Next, tap on: [3] PERSO SHA256 OFF;
7. From here, go back to the UMTS MAIN MENU by tapping on Menu (left soft key on SGS4) and selecting Back from the options;
8. Once you are in the UMTS menu, tap on: [6]COMMON;
9. There, select: [6]NV REBUILD;
10. Now in the NV Rebuild menu, tap on: [4] Restore Back-up;
11. Samsung Galaxy S4 will now go into a temporary freezing state. After a while you’ll see some activities. The screen will be black and the LED will turn Blue. The Menu and Back key button on phone will also light;
12. Lastly, your Samsung Galaxy S4 will reboot automatically and will take a minute or two in booting up (depending on your ROM's Boot Animation);
BOOM! Your Galaxy S4 GT i9505 is now SIM-unlocked! Try a SIM card from another carrier to confirm the process and do not forget to share this to your friends too!
XDA_AndioAngeles
FB: facebook.com/rmasr.angeles
Click to expand...
Click to collapse
This method does not work if your base band has been upgraded to I9505XXUBMG7 wish i had know what samsung was planning i would of done the unlock before upgrading. oh well the power of hind sight i suppose :crying:
I tried this...but when I put in the (star) #0011# the next screen says
"No Service"...what does that mean?
dorian2kx said:
I tried this...but when I put in the (star) #0011# the next screen says
"No Service"...what does that mean?
Click to expand...
Click to collapse
Same problem. Did you manage to sort this?
bump
any resolution? I get {connection problem or code MMI not valid}
UMTS Never appears for me unless I do this on my i545
Enter Phone Menu ..
* # 27663368378 #
[1] UMTS
[2] DEBUG
[6] PHONE CONTROL
[6] NETWORK LOCK
[3] PERSOSHA256 OFF
On this step off #3 is not a choice for me
MENU> BACK 3 TIMES .. [UMTS MAIN MENU]
[6] COMMON
[6] NV REBUILD
If it says GOLDEN-BACKUP exists ..
[4] RESTORE BACK-UP
any assistance is greatly appreciated
i545
Enter Phone Menu ..
* # 0011 #
press [menu]
press back
press [menu]
press key input
press Q
press [menu]
press 0000
wait for 30 seconde
winny57 said:
Enter Phone Menu ..
* # 0011 #
press [menu]
press back
press [menu]
press key input
press Q
press [menu]
press 0000
wait for 30 seconde
Click to expand...
Click to collapse
Improved your post. Worked for me, thanks!
*#0011#
Press [MENU]
press [Back]
press [MENU]
Press [Key Input]
Input [Q]
press [MENU]
Press [Key Input]
Input [0000]
Wait 30 Seconds.
If you get "0", exit the ServiceMode and restart.
no probleme
Still nothing on i545
The magic *#197328640# does not have "phone control" menu ary more...
*#9090# works.
Sent from my SAMSUNG-SGH-I337 using xda premium
Phoneguy589 said:
*#9090# works.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Where should I go in this menu? Selected the first [1] menu, now the phone starts "Blocking mode" what's this???
First hit menu then back. Then I hit menu-select-4 and and then hit menu then back and it gives me a list of options. Never messed around in there but I just looked around to see what was there. I tried 1,2,3 and phone just rebooted but nothing really happened.
Sent from my SAMSUNG-SGH-I337 using xda premium
Hm...
I do *#9090# and see:
DIAG CONFIG
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*)
Could someone check what the defaults are?
Ok did the sequence and found it
What is "blocking mode enabled"? Did I push something wrong?
These are what I see
Sent from my SAMSUNG-SGH-I337 using xda premium
Phoneguy589 said:
These are what I see
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Thanks I got it!
I need to see the very first screen:
DIAG CONFIG
Ok for everyone here is the FULL SEQUENCE:
*#9090#->MENU->Back-> [4]DM over UART()->MENU->Back->[1]UMTS->[1]DEBUG SCREEN->[6]PHONE CONTROL->[6]NETWORK LOCK->[3]PERSO SHA256 OFF->MENU->END
Is access to this useful at all?
Sent from my SAMSUNG-SGH-I337 using xda premium
Yes got it unlocked! Thanks a bunch.
Sweet! Is there a way to verify if it is unlocked now? NM, I was thinking of bootloader unlock...doh.
Sent from my SAMSUNG-SGH-I337 using xda premium
Tried it and it didn't work after put in my tmobile sim.
Tried it and verified that Perso SSH 256 was off and when i popped another carrier sim, it still said sim locked. Caved in and purchased the unlock code form cellunlocker.
p.S: Don't forget to switch Perso SSH 256 back to ON if you want to unlock it via cellunlocker code
Tried it as well and didn't work. So used unlock code.
Thanks @mikron15 for letting me know to turn SSH 256 back on as I was getting unlock unsuccessful.
tried it as well with no success... any other suggestions?
Phoneguy589 said:
Sweet! Is there a way to verify if it is unlocked now? NM, I was thinking of bootloader unlock...doh.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Stick in the T-Mobile SIM card
When I try to turn SSH back on it automtically reboots afer I press the button initial option 4 on the service menu. I cant get back to switch to on. What qm I doing wrong?
Thanks!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
here is a sim unlock that might work for us becuase it works on the T-Mobile S4.
How to SIM unlock Samsung Galaxy S4 SGH-M919 (tested - works)
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
her is a link to kaleido How to SIM unlock Samsung Galaxy S4 SGH-M919 (tested - works)
http://forum.xda-developers.com/showthread.php?t=2283068
killer5000 said:
here is a sim unlock that might work for us becuase it works on the T-Mobile S4.
How to SIM unlock Samsung Galaxy S4 SGH-M919 (tested - works)
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
her is a link to kaleido How to SIM unlock Samsung Galaxy S4 SGH-M919 (tested - works)
http://forum.xda-developers.com/showthread.php?t=2283068
Click to expand...
Click to collapse
Can't verify with the SIM card yet but the sequenses worked for S4.
What are the additional steps for S3?
I can't test because I got my sim unlock all ready by paying 25 for it when the phone came out
Sent from my SAMSUNG-SGH-I337 using xda premium
I followed the SIM unlock method, and it worked for my Bell S4.
Hi,
I have rooted MK2. I am trying to follow the steps http://gs4.wonderhowto.com/how-to/carrier-unlock-your-samsung-galaxy-s4-so-you-can-use-another-sim-card-0148110/
To get to the menu, I'd have to use the instruction at the bottom
*#0011#
Menu > Back
Menu > keyInput "Q"
Menu > keyInput "0000"
Wait for few seconds
However, when I get to step 6, option 3 PERSO SHA256 OFF does not exist. It only has 2 options:
[1] PERSO SHA256 Info
[2] RAT_FREE_SUPPORTING ON
How would be able to turn network lock off?
Thanks
http://forum.xda-developers.com/showthread.php?t=2595457
option PERSO SHA256 OFF not exist
redhonker said:
Hi,
I have rooted MK2. I am trying to follow the steps
To get to the menu, I'd have to use the instruction at the bottom
*#0011#
Menu > Back
Menu > keyInput "Q"
Menu > keyInput "0000"
Wait for few seconds
However, when I get to step 6, option 3 PERSO SHA256 OFF does not exist. It only has 2 options:
[1] PERSO SHA256 Info
[2] RAT_FREE_SUPPORTING ON
How would be able to turn network lock off?
Thanks
Click to expand...
Click to collapse
hello,
i have the same problem
PERSO SHA256 OFF does not exist.
after this time, do you make it success ?
so thanks
any updates
does anybody got the solution?
hello, I have the same problem "Perso SHA256 Off" does not exist.
Please write if you have a solution for this
r.gr said:
hello, I have the same problem "Perso SHA256 Off" does not exist.
Please write if you have a solution for this
Click to expand...
Click to collapse
I have the same problem; where is the [3] PERSO SHA256 OFF option ?
Hi to everyone!
I have been reading a lot of forums about unlocking my Samsung S4 i9506, but it's resulting very hard...
First, I read about getting a hidden Service Mode Menu, introducing *#0011# on dial pad.
For going to main menu, with the menu button, back, menu button, insert code, Q0.
Now I got the main menu. Clic [1] UMTS, [1] Debug Screen, [8] Phone control, [6] Network Lock
And now I should see three options:
[1] Perso Sha256 Info
[2] Perso Sha256 ON
[3] Perso Sha256 OFF
But options [2] and [3] are Hidden.
¿Hoy to "unlock" these options for going on the Sim Unlocking proccess?
Thanks a lot for your responses!
hi guys so i found on androidorigin this :
– Insert the new SIM card into the Galaxy S5
– Turn the Galaxy S5 off and then turn it back on
– Open the Dialler application, and type in *#197328640#
– Then select [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3] Perso SHA256 OFF
– After all this, you will need to wait about 30 seconds before pressing the back button
– Now that you’re back at the main menu you should see a Network Lock message
– Now select [4] NW Lock NV Data INITIALLIZ
they say saying that this will unlock your s5 so i can use any provider, is this true? dose it work??
Click to expand...
Click to collapse
Click to expand...
Click to collapse