Need help tried to get into flashboot mode now the phone is bugging out. all I did was got root and went perfect then I'm trying to use the flash too program and flash a rom or something. and it was telling me to connect into flashboot mode then press the ok button on the PC to start the program couldn't connect. so I kept trying and before the phone didn't want to get into any type of recovery or flash mode now the phone if I turn it on without any USB in the phone shows the Sony sign sits there and reboots by its self. or if I just plug it into my charger I freaking still get a green light and its stuck in the flash mode how can I get it to just turn on normal so I can have a working phone. Sorry for the long story its just odd I've never had a phone where if you pressed a few buttons and the PC never even saw the phone that its freaking out like I dumped a bomb in it. but nothing was wrong I had rooted perfect and turned it off a ton of time before trying to get into flashboot mode. Thanks for any advice everyone
Sent from my Nexus S using Tapatalk
i got the same issue by you so the only solution i get is to reflash generic 2.1 with flash tool and root xrec ect..and reboot with the charger plug and let's the phone charge reboot again with cable plug and when the green light disappear on boot then flash your rom with xrec. so remember don't flash with flashtool when you in xrec this made a autoflash mode and stay in flash all the time and eat your battery and maybe damage the phone if you stay in flash for long time.
jespere que je tai aider ciao
freex10.mixdarkfroshcyanthem.bb58
Hey so you did end up getting out of this mode when it happened to you? And Im getting what your say but im sorta confused so I had android 1.6 and just finished rooting and was trying to put the phone in flashboot mode. Then I downloaded the flash tool and I moves to recovery files the the data/local or where ever they where supposed to be. Then tried to get into recovery but couldn't so I downloaded a rom or generic firmware for my type of phone. but when it said to put in flash mode by just holding the back button and put the plug in and press the ok button it wouldn't find the phone. That's when my problem began I tried to just take the battery out load normal to restart but it then just gets to the Sony sign and then turns off. The software didn't even touch the phone its getting annoying cuz I just want it to turn back on. Can you or someone post a like to where I should go with those directions you posted please
Sent from my Nexus S using Tapatalk
I already had some problems with my X8, send it to repair and I got a brand new mainboard. I got it back yesterday..
Yesterday I installed floyo v0.25 and it worked properly, just that I had some app installing issues that I fixed. Wihile playing Angry Birds my phone freezed, so It removed the battery and tried to turn it back on, but it wont. Its still vibrating when I press the power button, but it wont boot. The LCD light turns on and off every few seconds but the software wont boot.
I tried to re-instal with SEUS, still the same problem. Now Im trying to flash a original SE ROM with a flash tool.
If this doesnt work too does anyone have another sollution?
EDIT: I tried the x10FlashTool and wanted to flash the generic 2.1 firmware, but when I tried to flash it I got a error message:
08/056/2011 15:56:49 - ERROR - Error flashing. Aborted
08/056/2011 15:56:49 - INFO - Now unplug the device and power it on
08/056/2011 15:56:49 - INFO - Then go to application settings
08/056/2011 15:56:49 - INFO - turn on Unknown Sources and Debugging
The problem is I cant power my phone on to change it, If I could there wouldnt be any need of doing the flashing.
I've seen somewhere (although I'm not so sure) that you can charge your phone via pc if you press and hold the "back" button and connect the usb cable..Then the green led light opens and that means that it's charging...
Yes, that is possible. I re-installed with SEUS but I still have the same problem. Couldnt reinstall with PC Companion because it didnt recognize the phone.
I need to get into the flash somehow, wipe it and replace with original files, but the x10flashtool is not working.
repair it again？
I would have to pay for repair this time because I dont have warranty anymore.
How much would a new mainboard cost? But Its not a hardware issue, the software doesnt want to boot.
Hey, I'm stuck on boot screen, can only get into TWRP but that's it. I'm trying to go back to stock using the flashtool method but everytime I try to boot into download mode my phone immediately goes to Firmware Update screen and stuck there so lg tool gives error saying phone is disconnected. Anyone have any ideas what might be casing this? Thanks for any help
http://forum.xda-developers.com/showthread.php?t=2448960
but it will wipe it clean like if you got the phone again
lampardd said:
Hey, I'm stuck on boot screen, can only get into TWRP but that's it. I'm trying to go back to stock using the flashtool method but everytime I try to boot into download mode my phone immediately goes to Firmware Update screen and stuck there so lg tool gives error saying phone is disconnected. Anyone have any ideas what might be casing this? Thanks for any help
Click to expand...
Click to collapse
Hold the power button until you get a black screen. Download LG Mobile Support tool and the LG Drivers. Plug USB In and then hold the Power + Volume Up key. On your screen, click Upgrade Recovery. From there, you can do a factory reset through download mode of your phone.
lampardd said:
Hey, I'm stuck on boot screen, can only get into TWRP but that's it. I'm trying to go back to stock using the flashtool method but everytime I try to boot into download mode my phone immediately goes to Firmware Update screen and stuck there so lg tool gives error saying phone is disconnected. Anyone have any ideas what might be casing this? Thanks for any help
Click to expand...
Click to collapse
In case you did the latest firmware ota upd,there is a topic that can solve you problem as long as you can access TWRP(even if you didnt do the ota it will,i tried that myself) Here is what you need to do.
use TWRP's "terminal command" option to run the following:
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
You'll have to type that whole thing out, and be VERY careful with spaces and punctuation. One wrong letter and you could nuke your phone.
This will probably fix you problem when it has to do with any update.
Thanks for the responses. I finally fixed it.. I started the procedure from scratch with a new laptop and somehow it worked lol
Sent from my LG-D802 using xda app-developers app
Hey,
I also have a lg g2 with android 4.4.2. I wanted to update it to android 5.0 with lg pcsuite. all was fine until there was an error, while my phone was in download mode. then lg pc suite said i should disconnect my phone
from the computer and then reconnect it and restart it. so i did but when I restarted the phone it was still in download mode and now lg pc suite says that it cant connect. Now when i start my phone it stays in the download mode.
My phone isnt rooted or smth else.
Can someone please help?
Frozen at frimware update and device doesnt get detected
Hi,
i have got the same situation now.
I tried to use LG support tool, it detects my phone but it shows that I havent enough memory to do restore.
How to erase some space when my phone is in download mode ?
Doing Restore upgrade errors using PC Suite, but it stops after approx 40%.
Hard reset doesnt work.
Thank you,
bananatuner said:
Hey,
I also have a lg g2 with android 4.4.2. I wanted to update it to android 5.0 with lg pcsuite. all was fine until there was an error, while my phone was in download mode. then lg pc suite said i should disconnect my phone
from the computer and then reconnect it and restart it. so i did but when I restarted the phone it was still in download mode and now lg pc suite says that it cant connect. Now when i start my phone it stays in the download mode.
My phone isnt rooted or smth else.
Can someone please help?
Click to expand...
Click to collapse
It happened to me and now phone hanged in download mode and can not connect to pc. Did you have a solution?
Solve
Guys! I had the exact same problem today. My solution was to keep pressing the "try again" button every time the error appeared on my computer screen. It took some time but the error was appearing at different levels each time in this order : 45% 57% 65% 80% and next the instalation was completed. If it doesn't work try switching to another computer if you can. After the firmware update hits 100% your phone will restart and the LG logo will appear(the led changes its color during this process). At this point you have to just wait a while. Then a dialog box will appear saying that the applications on your phone are configuring themselves. After that your phone will start and work normaly. The cause of the error is the lack of memory on your phone. If those idiots working for LG would say "YOU DON'T HAVE ENOUGH STORING SPACE" this stuff would not happen.
The phone is not rooted!(IMPORTANT)
Phone name: LG G2
Phone model: D802
Old software: 4.4.2 (KitKat)
Actual software: 5.0.2 (Lollipop)
I hope this hellped you solving the problem.
My lg optimus exceed 2 will only display on screen firmware update which is froze the phone won't do anything Please Help! !!!!
Turn of the phone and enter to download mode again and try flash to stock kdz file with lg flash tool
I had same problem "firmware update", simple just remove the battery and sim for 15 sec. then put it back and restart.
Hello
I can't access my LG g2 after trying to wipe the system and it runs on frozen screen. Kindly help out please
My LG x power died and I went to plug it in and a screen popped up saying,"Firmwire Update 0%", so I kept it plugged in for the next half an hour, and it still said 0%. I've tried resetting it and powering it off but nothing seems to be working. What do I do?
Andylag44 said:
Hello
I can't access my LG g2 after trying to wipe the system and it runs on frozen screen. Kindly help out please
Click to expand...
Click to collapse
Download lg flash tool.
Download lg g2 stock firmware.
Press volume up button and insert usb cable. You will see download mode.
Open lg flash tool and flash the kdz( original firmware) through flash tool.select cse flash.
My LG V20 got stuck on the Firmware Update screen. It appears every time I restart the phone and I have to take the battery out. If I start the phone plugged in it starts normally. I was able to do a factory reset, the phone started normally a few times without being plugged in, now it's back to the Firmware screen. I can use the phone but need to restart when it's plugged in. I hope Oreo Update will fix it. I don't know much about updates, but do big updates like that reinstall the drivers as well?
Hello everyone I also have this kind of experience so many times in my g2 mini.stuck on Firmware update. What I’m doing is,
1. remove the battery to turn it off. Plug your charger and before plugging it to your phone hold the volume down and plug in until tou see the android is updating; or
2. Just simply hold the powerbutton + volume down until you see Android is updating.
I would love to see your feedback if it helps.
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Wait until the battery drained and phone shutdown, connect charger again and wait for 5 minutes , it will turn on in erecovery , shutdown and redo fastboot etc carefully.
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Dissconnect the usb cable and hold the power button. When it is just about to reboot, plug in the USB and hold the volume down button. This should take you to fastboot OR to error mode...
-------
Huawei devices aren't easy to brick, but recovering the devices is a pain... I hard bricked my device as well a couple weeks ago..
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Dr4In said:
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Click to expand...
Click to collapse
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
rizwansadiq said:
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
Click to expand...
Click to collapse
Hi, I have a similar problem: "your device has been unlocked and can't be trusted". I cannot enter fastboot nor with the two buttons method (power + volume down) or the three buttons method. I messed up with the EMUI, I guess. Infact, I unlocked the bootloader, relocked it and tried to unlock it again to flash a custom ROM. The first time I unlocked the bootloader, I tried to install TWRP but something went bad, I do not remember what, but I decided to relock.
Now I am stuck with this message. But....sometimes, I can't understand WHEN, I can enter my phone Last time it was when I tried the above solution (only volume down and usb cable, without the Power button). When the phone turned on, HiSuite recognized "a phone" was connected because the software turned on, but it couldn't really see it. I went into the Developer Options on the phone to turn on OEM, but it was grey and I could do nothing :crying:
Full of hope because the phone turned on, I then tried to flash the content of the SD Card (where I put files extracted with the Huawei Update Extractor) by holding the three buttons (power + volume up + volume down), but again it appeared the "your device has been unlocked" message.
Now the phone is off. Once, in the meantime, it appeared a red flash on the screen for one second, I am not sure it is related to the battery, it doesn't display a battery but only a flash.
I cannot enter fastboot in any way, I cannot flash from SD card, sure I cannot rollback because it implies flashing.
My only hope is some command to be given when I can enter the phone. Anyway, I sent it to repair (not official, I have obviously no guarantee anymore) and they sent it back to me: they didn't know what to do.
Any idea? Thanks a lot!
PS: I will read your replies as soon as I can but I have very variable ad unstable working hours!
Please don't blame Huawei for YOUR mistakes. Thank you
Johnny TDN said:
Please don't blame Huawei for YOUR mistakes. Thank you
Click to expand...
Click to collapse
Did I? Sorry if it seemed so, but of course are my mistakes...
help us
i have a same problem did you find solution
Same Problem Here
I have the same issue. Have anyone found a solution yet?
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Meticulus said:
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Click to expand...
Click to collapse
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
sanjay.rup said:
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
Click to expand...
Click to collapse
Its not actually mine and it was long time ago, but the owner told me that he unlocked bootloader with the official way, relocked, and then he unlocked again the third time the phone died.
Hello.
me too, he does not want to do anything anymore.
he only knows this '' your device is booting now '' screen with the red LED flashing.
whatever I do, it always starts on this screen. I think you have to change the motherboard.
Do you know where to find it at a reasonable price?
VNS-l31
Your device has been unlocked and can't be trusted
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
ionut69 said:
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
Click to expand...
Click to collapse
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
alesbabnik said:
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
Click to expand...
Click to collapse
now my battery is empty but when i plug in acc cable show same screen
any fix on this as I have the same issue with huawei p9 lite - no recovery mode, no usb reckognition from pc. Just stuck on that "unsafe" prompt screen after huawei logo
Stop buying huawei phones if you are into custom roms or root. They made the phone easily brickable and they removed the bootloader unlock site due to some stores installing malware into phones. But hey, they couldn't simply do what Xiaomi is doing eh?