Q&A for [Stock][ROM][Odin] Galaxy Y Duos S6102 flashable firmware packages
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Stock][ROM][Odin] Galaxy Y Duos S6102 flashable firmware packages. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Confused
PDA : S6102DDLG1
PHONE : S6102DXLC2
CSC : S6102ODDLF1
After a soft brick of my phone, where I messed up with the partition, that made me re-partition with torini pit file, I somehow now have ended up with this quite different versions on my phone. could anyone please guide me how to make it right?
billysam said:
PDA : S6102DDLG1
PHONE : S6102DXLC2
CSC : S6102ODDLF1
After a soft brick of my phone, where I messed up with the partition, that made me re-partition with torini pit file, I somehow now have ended up with this quite different versions on my phone. could anyone please guide me how to make it right?
Click to expand...
Click to collapse
Never flash pit or bootloader files unless you specifically have a bootloader problem - its not needed just to flash stock rom via odin
I don't understand what you mean by make it right - does your phone boot? Do you want to change your baseband to a different region?
If you want to change your baseband just flash a different stock rom via odin
My firmware thread for the 6102 is below
http://forum.xda-developers.com/showthread.php?t=2700169
short story long
marcussmith2626 said:
Never flash pit or bootloader files unless you specifically have a bootloader problem - its not needed just to flash stock rom via odin
I don't understand what you mean by make it right - does your phone boot? Do you want to change your baseband to a different region?
If you want to change your baseband just flash a different stock rom via odin
My firmware thread for the 6102 is below
http://forum.xda-developers.com/showthread.php?t=2700169
Click to expand...
Click to collapse
Well when it happened, I had installed Xdous v2 ROM.
It was working fine, then I went ahead with all kinds of tweaks to make an ext2 partition, that went well also. I was able to Link all my files, then suddenly it got hanged, and I was left with out with only download mode, nothing else to work on.
Couldn't make out what really caused it, but I suspected(not blaming) crons mod behind this, that came in the Xduos tweaks and scripts and that was what I had flashed last.
I have cwm nandroid back of my stock rom, as well as S6102DDMF4_S6102ODDMF4_INS.zip which I tried flashing with Odin.
But it didn't load up.
As the last resort I had to make the decision of flashing these files from here
http://forum.xda-developers.com/showthread.php?t=2619565 (thanks) :good:
So Now, I am in this NBP(noob bombed position) I have all these baseband updated and stock rom, S6102DDMF4_S6102ODDMF4_INS, the DDLG1, and the nandroid backup which was made before doing anything Silly advanced. (I even have the titanium backup :laugh::laugh
My SGY Boots and it boots well below 60 secs, Ram usage is less and I can multi task as well. Its performing much better than the S6102ODDMF4 version. Although there are times that when swiping stops work along with wifi and mobile data, either I have to restart it or have to flash its kernel to make it right. I have been using these with the custom rom Xdous and custom kernel compactV1.3 provided by kenjiboy and nitu bhaskar.
The Custom Rom(which I want to continue) is based on DDLG1,
and I have
PDA : DDLG1
PHONE : DXLC2
CSC : DDLF1
Shouldn't it show only 1 series while I have 3 on my SGY?
(A) will flashing the stock DDLG1 version make
PDA : DDLG1
PHONE : DDLG1
CSC : DDLG1
my life a little bit more easier and organised??
Or should I go with
(B)the original nandroid backup of my SGY?
Want to start new and fresh now.
billysam said:
Well when it happened, I had installed Xdous v2 ROM.
It was working fine, then I went ahead with all kinds of tweaks to make an ext2 partition, that went well also. I was able to Link all my files, then suddenly it got hanged, and I was left with out with only download mode, nothing else to work on.
Couldn't make out what really caused it, but I suspected(not blaming) crons mod behind this, that came in the Xduos tweaks and scripts and that was what I had flashed last.
I have cwm nandroid back of my stock rom, as well as S6102DDMF4_S6102ODDMF4_INS.zip which I tried flashing with Odin.
But it didn't load up.
As the last resort I had to make the decision of flashing these files from here
http://forum.xda-developers.com/showthread.php?t=2619565 (thanks) :good:
So Now, I am in this NBP(noob bombed position) I have all these baseband updated and stock rom, S6102DDMF4_S6102ODDMF4_INS, the DDLG1, and the nandroid backup which was made before doing anything Silly advanced. (I even have the titanium backup :laugh::laugh
My SGY Boots and it boots well below 60 secs, Ram usage is less and I can multi task as well. Its performing much better than the S6102ODDMF4 version. Although there are times that when swiping stops work along with wifi and mobile data, either I have to restart it or have to flash its kernel to make it right. I have been using these with the custom rom Xdous and custom kernel compactV1.3 provided by kenjiboy and nitu bhaskar.
The Custom Rom(which I want to continue) is based on DDLG1,
and I have
PDA : DDLG1
PHONE : DXLC2
CSC : DDLF1
Shouldn't it show only 1 series while I have 3 on my SGY?
(A) will flashing the stock DDLG1 version make
PDA : DDLG1
PHONE : DDLG1
CSC : DDLG1
my life a little bit more easier and organised??
Or should I go with
(B)the original nandroid backup of my SGY?
Want to start new and fresh now.
Click to expand...
Click to collapse
The stock rom firmware you flashed if it wasn't from my thread was probably not a wipe pack so you have to manually data wipe after flashing it
All my firmwares are wipe packs so it should wipe system & data when you flash it
If it bootloops just wipe data in recovery
As for firmware versions it doesn't matter if they are not the same - modem is baseband version and pda is rom build version
You can flash any firmware you like from my firmware thread although it's best to flash one from your geographical region
thanks it's working
Related
Hello guys i've installed merruk kernel 2.0 pre-final and my imei is blank. It don't recognize my sim card. I've made a full backup in CWM but it not worked. I want to revert ext4.zip process and install my stock kernel that i have a backup, is't possible? Will it restore my IMEI?
most likely the ril is not compatible with your baseband
I keep saying you cant use an old kernel with a new firmware baseband or you will loose imei
you can solve this by replacing the ril lib with an old baseband version
see
http://forum.xda-developers.com/showpost.php?p=52449987&postcount=232
try the hyp 8 ril - you can try others if you wish
if you want to return to stock you will have to flash stock rom via odin to convert your system from ext back to rfs
see
http://forum.xda-developers.com/showthread.php?t=2568853
you can then restore your stock nandroid backup as long as you restore it using the kernel and cwm from which it was made on
marcussmith2626 said:
most likely the ril is not compatible with your baseband
I keep saying you cant use an old kernel with a new firmware baseband or you will loose imei
you can solve this by replacing the ril lib with an old baseband version
see
http://forum.xda-developers.com/showpost.php?p=52449987&postcount=232
try the hyp 8 ril - you can try others if you wish
if you want to return to stock you will have to flash stock rom via odin to convert your system from ext back to rfs
see
http://forum.xda-developers.com/showthread.php?t=2568853
you can then restore your stock nandroid backup as long as you restore it using the kernel and cwm from which it was made on
Click to expand...
Click to collapse
My current ROM is the stock rom of S5360B, how do i do it without brick my phone in this case? what other methods should i try to restore my IMEI if this method not work?
Current ROM info:
Model: GT-S5360B
Version: Android 2.3.6
Product Code: ZTO
PDA: S5360BUTME2
CSC: S5360BZTOMJ1
MODEM: S5360BUTNA1
The GT-S5360B is exactly the same phone as a normal GT-S5360. It will work without much problems (if any), and it most probably won't brick your phone. Flash the zip for your baseband as per nornal (remember to mount /system)
Any other methods? I'm not too sure, apart from using Galaxy Toolbox to check your efs partition is damaged and backing up your efs partition.
Kaen22 said:
My current ROM is the stock rom of S5360B, how do i do it without brick my phone in this case? what other methods should i try to restore my IMEI if this method not work?
Current ROM info:
Model: GT-S5360B
Version: Android 2.3.6
Product Code: ZTO
PDA: S5360BUTME2
CSC: S5360BZTOMJ1
MODEM: S5360BUTNA1
Click to expand...
Click to collapse
no difference - you can flash 5360 on a 5360b if you want to
the only difference is the B version is branded varient of the 5360
you can use any file you like from the 5360 without any problems plus if you really want the 5360b firmware to flash stock rom via odin at a later date its also on my firmware thread
Ok, I'll try to install the stock rom via odin, hope it works . I have a doubt, I ran the ext4 converter. have i to follow this tutorial http://forum.xda-developers.com/showthread.php?t=2007720 or can i install without re-partition?
If it not working, what ril fix file can i use for my phone?
I'll update the result here.
Kaen22 said:
Ok, I'll try to install the stock rom via odin, hope it works . I have a doubt, I ran the ext4 converter. have i to follow this tutorial http://forum.xda-developers.com/showthread.php?t=2007720 or can i install without re-partition?
If it not working, what ril fix file can i use for my phone?
I'll update the result here.
Click to expand...
Click to collapse
Never tick repartition in odin
all you have to do is flash pda modem and csc - DO NOT tick anything extra
your phone will convert back to rfs from ext if you flash stock rom via odiin
I posted a load of rils from different basebands in post #2 of this thread - you can use what ever one you want - ril is dependant on rom firmware and kernel being used
marcussmith2626 said:
Never tick repartition in odin
all you have to do is flash pda modem and csc - DO NOT tick anything extra
your phone will convert back to rfs from ext if you flash stock rom via odiin
I posted a load of rils from different basebands in post #2 of this thread - you can use what ever one you want - ril is dependant on rom firmware and kernel being used
Click to expand...
Click to collapse
The phone doesn't recognized in download mode. It says "unknown device". I've installed Saumsung drivers and it's usb work fine but in download mode it not working.
Kaen22 said:
The phone doesn't recognized in download mode. It says "unknown device". I've installed Saumsung drivers and it's usb work fine but in download mode it not working.
Click to expand...
Click to collapse
then click unknown device
update driver
select folder
select the install location of the samsung divers (normally C:\Program Files\SAMSUNG)
if its not there then you havent installed the drivers
note - you do not need drivers for mass storage mode - you only need them for adb (download mode)
It worked! I've installed the stock rom and my IMEI is showing and the sim card is ok. Thank you all. But i have one more question:
I don't intend to continue with stock rom and stock kernel. What should i do to prevent this error occur by installing any custom rom or custom kernel? I've heard that i have to backup the efs, but the efs folder is always blank on galaxy y.
Kaen22 said:
It worked! I've installed the stock rom and my IMEI is showing and the sim card is ok. Thank you all. But i have one more question:
I don't intend to continue with stock rom and stock kernel. What should i do to prevent this error occur by installing any custom rom or custom kernel? I've heard that i have to backup the efs, but the efs folder is always blank on galaxy y.
Click to expand...
Click to collapse
the efs partition is empty on galaxy y because that partition is not mounted
you can backup your efs partition with galaxy toolbox but that wont help you with the problem you had
I keep saying its to do with the ril - you cant use an old kernel with a new firmware and vise versa
to solve this if you use an old kernel with a new firmware replace the ril lib of the new firmware with one from an old firmware
Iv even posted them
[Q&A] ★ [ROM/ROOT][N900VVRUCNC2][4.4.2] Stock Root Odex/DeOdex [04/23/14]ύ
Q&A for ★ [ROM/ROOT][N900VVRUCNC2][4.4.2] Stock Root Odex/DeOdex [04/23/14]★
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ★ [ROM/ROOT][N900VVRUCNC2][4.4.2] Stock Root Odex/DeOdex [04/23/14]★. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Didn't use stock rom slot when installing, phone will only go into Download mode
Hi,
I have been using custom roms for several years now, and wanted to update my Note 3 from rooted stock JB 4.3, to KK 4.4.2 (in this thread). What I've done:
1. Safestrap is installed. I wanted to backup the Stock in the Stock rom slot, and restore it to another slot, as a live backup. My backup was 7+gb, so I made the new partition the same, but the data backup was larger than the available data partition I could make ( 4gb ).
2. I restored the stock slot backup to the 2nd slot, but again the data was too big. It didn't boot after displaying the Verizon logo.
3. I decided to install the KK to this slot, and retain my Stock in the Stock slot (my mistake, I believe).
4. Installed KK to 2nd slot, rebooted, and used Odin to flash the KK firmware (with Knox security I think is the major problem, not sure)
5. Reboot phone, it shows the Samsung logo, then nothing.
6. Can only get to Download mode via Volume Down, Home button, and Power
I figure I can unbrick the phone by installing the old firmware for JB 4.3, but I don't know where it is. I can't find it. I don't care about the Knox security/warranty flag at this point, have complete backups for the phone, and am ready to just wipe the phone completely.
I don't want to experiment on my own with no direction, especially since there are smart folks who might have run into this problem before.
My goal: Go to KK 4.4.x with root. Is there a way to get there from where I am? I have ODIN ready to go.
Thanks!
Fixed
syspimp said:
Hi,
I have been using custom roms for several years now, and wanted to update my Note 3 from rooted stock JB 4.3, to KK 4.4.2 (in this thread). What I've done:
1. Safestrap is installed. I wanted to backup the Stock in the Stock rom slot, and restore it to another slot, as a live backup. My backup was 7+gb, so I made the new partition the same, but the data backup was larger than the available data partition I could make ( 4gb ).
2. I restored the stock slot backup to the 2nd slot, but again the data was too big. It didn't boot after displaying the Verizon logo.
3. I decided to install the KK to this slot, and retain my Stock in the Stock slot (my mistake, I believe).
4. Installed KK to 2nd slot, rebooted, and used Odin to flash the KK firmware (with Knox security I think is the major problem, not sure)
5. Reboot phone, it shows the Samsung logo, then nothing.
6. Can only get to Download mode via Volume Down, Home button, and Power
I figure I can unbrick the phone by installing the old firmware for JB 4.3, but I don't know where it is. I can't find it. I don't care about the Knox security/warranty flag at this point, have complete backups for the phone, and am ready to just wipe the phone completely.
I don't want to experiment on my own with no direction, especially since there are smart folks who might have run into this problem before.
My goal: Go to KK 4.4.x with root. Is there a way to get there from where I am? I have ODIN ready to go.
Thanks!
Click to expand...
Click to collapse
I flashed this file ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5 , found on gala xynote3update com slash galaxy-note-3-odin-factory-stock-firmware-usa-canada, search for the string 'MJE', but the download speeds on the links there were too slow, so I googled it. ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5.7z
I held the VOLUME DOWN, HOME, and POWER buttons and booted the phone into Download mode.
Then, I used Odin to flash the file, using the PDA field to choose the file (I think it says AP on later versions). It rebooted twice, once to recovery, then stayed at the Verizon Logo longer than I wanted, but it succeeded and then went through the initial setup.
I'm installing safetrap, then starting the KK 4.4.2 guide again. If I have a problem, I'll do this again but restore my safestrap backup. I don't expect any problems.
I hope this helps someone! I have the Retail Note 3, rooted 4.3 Jellybean.
I will try to explain me clearly
My phone is working normally and I can restore nandroid without issues
I'm actually with my V29 KK TW and work without issues
BUT If i flash aosp or cm rom, just afeter enter pin code, the screen becomes black like problem with proximity sensor
I can put my hand in front, it doesn't change, If I push the buttons, sometimes the screen appears and disappears immediately
and the more strange is I have this problem with the RR 5.3.9 I had flashed before without issue and can restore a nandroid I have done with it...
I have done a clean flash of my KK TW V29 without issue....
first I have made a FULL wipe include internal storage and flash stock NI4 rom but without any changes
someone got an idea???
thank's
I have flashed successfully 2 QS L differents versions but can't with CM roms (euphoria, tema, RR...)
is there a reason to that
This is x-files troubles, personally I reflash stock LP with Odin and all is good now
I have try back with RR 5.3.9 and got same problem but if I restore nandroid from 5.3.9 it's working without issues...WTF!!!!!!!!!!!!
i try to flash L stock rom with odin root, complete wipe (except ext sdcard)
I run masik script wipe and ael cleaner, format boot, system data
It seem's it begin when I flash arter kernel or the UKM (universal kernel manager) to run civ kernel..
so i try to uninstall ukm but allways without succes
I flashed 4.4 c-rom without issues, so I flashed back KK rom with odin and back to my V29 kk rom
look my signature to have details on my config
thank's for the help..
So...first question:
Did you ever take the official lollipop update from samsung?
Second Question:
What country are you in, and carrier do you use?
Please message me the following details from the sticker inside the device under the battery, so I can grab the Service files from samsung for you!
I've flashed OB1 with odin and flash back after 2 weeks NI4 and the last I try was this N9005XXUFNG2_N9005OXXFNG3_XEF (Open France) (No-wipe)
the flash goes well but doesn't change my BL and modem, before that I was with NI4 BL and NI3 modem and now still with that
I use sosh carrier (orange) in france
will send you the details from sticker
@rayman95 This is what i have found out!!! From my understanding, You took the Lollipop bootloader when you installed the OC1 Package. if you want to completely restore to "Earlier Version", WHICH this may not be possible due to a SAMSUNG new coding issue, You would need to have the complete 4 Files software to repair your device.... As well as using all the following checkboxes in ODIN:
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase ALL
Phone Bootloader Update
I Attempted to download your files for the device, but Kies will Not "Initialize" for download, and it will give you an Error if you plug the device into Kies3 i believe because you device is ROMMed.
IF you want to try Kies to restore AND it begins "DOWNLOADING", You can copy the Tmp****.tmp.zip that is created when the progress indicator hits 85% in Kies.
The File location on Win7 is "C:\Users\*Your Screen Name HERE*\AppData\Local\Temp"
If you Have the 4 Part file for NI2, try flashing in ODIN wioth the Above Checkboxes selected!!
Kies don t let me dl any files and gave me some error but don't remember exactly what... but not important because you give me good files.....after that I hope flashing again cm12.1.....
Thank so again chief....
After more than a year with my 4.3 Note 3. I decided to flash a custom ROM. Namely Aryamod 6. (first attachment was the stock 4.3 I started with). I knew that I needed to backup my data so I decided to flash a custom recovery so I went about it by getting Rom Manager to flash CWM which eventually would allow me to flash TWRP. I eventually used the dd install method to install TWRP but that didn't work so I used odin to flash it. This caused my Note to freeze up a few minutes after booting with a black screen and the status bar just showing.
I decided to go through with flashing Aryamod v6 to get a fresh start. I flshed the BL and CP files which then caused my Note to go into a boot loop where I can't even boot to recovery. I was told to update to a 5.0 rom and I used the base rom of Aryamod v6 which is the BOE4 rom. Now when I try to flash the BOE4 rom I get the volume size is too big and invalid ext4 image.
Also sometime during the first bootloop I accidentally ticked Nand EraseAll but as far as I could see it did nothing.
Anyway, right now it is very difficult to download another ROM because of horrible Philippine isps and my Note is also my daily driver so I need to get it back into working order ASAP. These are the files I have:
ODIN 3.09
N9005XXUGBOEA_N9005OJVGBOE4_KSA - The Base ROM of Aryamod v6 a 5.0 rom
N9005XXUGBOEA_AryaModV6.0_Public - Aryamod v6
CP_N9005XXUGBOD3.tar.md5 - part of the aryamod instructions and I believe the modem of 5.0
BL_N9005XXUGBOEA.tar.md5 - part of the aryamod instructions and I think the bootloader?
twrp-2.8.7.0-hlte-4.3.img. zip- The twrp version I flashed when I was on 4.3
hlte-recovery.img.zip - I flashed this to get out of the recovery loop when I dd installed Twrp.
PIT-File-DBT+VFG-UK-MSM8974 - A PIT file.
SM-N9005_32GB.pit - another pit file. Flashing this got me into stock recovery.
N9005ZHUBMI7_N9005ZZHBMI7_N9005XXUBMI5_HOME.tar.md5 - I don't remember where I got this. Haven't flashed this but it might be a backup of my 4.3 rom
A few questions.
Can I fix my phone with these files?
When Flashing the BOE4, I just put it on PDA/AP? but in this thread http://forum.xda-developers.com/galaxy-note-3/general/guide-t2983873, he seems to be putting it on everything.
I really need your help on these
I have no idea about that file you have, whether it will work or not, but the only thing I can say is, the Polish ROM is the Lollipop ROM which works on most devices, so you might wanna give it a try.
I don't live in a place with even decent ISPs, but I can download a ROM in less than two hours, so if your condition is not worse then you will have to download a ROM rather than depending on what you have.
Hi,
I want to install emotion revolution and I have some questions:
- I have a SM-N910F with android 5.1.1 and baseband N910FXXU1COH4 Kernel 3.10.89-emotion-TW-5.1.1-nigltly-r21 . TWRP is installed and device is rooted. Can I directly flash or should I flash modem or bootloader first?
- Is the note 5 port release also working or note 4 or is there a specific one (didn't find anything)
Sorry if my questions are stupid, I'm a little bit lost with the version numbers COI4 COH4...
thanks
in advance
Olivier
oliverw68 said:
Hi,
I want to install emotion revolution and I have some questions:
- I have a SM-N910F with android 5.1.1 and baseband N910FXXU1COH4 Kernel 3.10.89-emotion-TW-5.1.1-nigltly-r21 . TWRP is installed and device is rooted. Can I directly flash or should I flash modem or bootloader first?
- Is the note 5 port release also working or note 4 or is there a specific one (didn't find anything)
Sorry if my questions are stupid, I'm a little bit lost with the version numbers COI4 COH4...
thanks
in advance
Olivier
Click to expand...
Click to collapse
firmware version numbers are really simple.
the higher the letter in the alphabet, the newer the version.
that's all there is to it.
so COI is newer than COH.
the Emotion rom topic should have a clear explanation of how to flash it all though.
i think they even added the bootloader and modem that you need.
and a note 5 port...of course that works on a note 4, that's why it's called a port
oliverw68 said:
Hi,
I want to install emotion revolution and I have some questions:
- I have a SM-N910F with android 5.1.1 and baseband N910FXXU1COH4 Kernel 3.10.89-emotion-TW-5.1.1-nigltly-r21 . TWRP is installed and device is rooted. Can I directly flash or should I flash modem or bootloader first?
- Is the note 5 port release also working or note 4 or is there a specific one (didn't find anything)
Sorry if my questions are stupid, I'm a little bit lost with the version numbers COI4 COH4...
thanks
in advance
Olivier
Click to expand...
Click to collapse
1. You must update BL and Modem, else it won't work. Both are available on their homepage, and they're the same as for Emotion Revolution r10.1
2. The Note 5 port is working on the N910F. Be aware though that the Note 5 port "features" stock Samsung colours, i.e. it's plain ugly (IMHO ). That's what's keeping me from flashing it atm. Emotion Revolution r10.1 has a more stock Android colour scheme (e.g. b/w toggles), which I find much more pleasant to the eyes than Touchwiz turquoise. But unlike r10.1, the Note 5 port has a working Theme Store (should have at least), so it's probably possible to theme the ROM to your liking.
Hi, I tried to flash modem and bl with the files on the site. I ended with an unknown baseband and the Phone powering off after 2 minutes... I used odin and put the bl file in the bl section and the cp file un the ap section and clicked start. Is this wrong?
I flashed a stock rom to get the Phone working Alain.
oliverw68 said:
Hi, I tried to flash modem and bl with the files on the site. I ended with an unknown baseband and the Phone powering off after 2 minutes... I used odin and put the bl file in the bl section and the cp file un the ap section and clicked start. Is this wrong?
I flashed a stock rom to get the Phone working Alain.
Click to expand...
Click to collapse
Why didn't you flash cp in the cp section?
Xelasarg said:
Why didn't you flash cp in the cp section?
Click to expand...
Click to collapse
good question. I saw a video telling it must be put in AP. I tried again and put it in CP but this gives the same result, baseband unknown and mobile restarting after 1 min...
any suggestion?
oliverw68 said:
good question. I saw a video telling it must be put in AP. I tried again and put it in CP but this gives the same result, baseband unknown and mobile restarting after 1 min...
any suggestion?
Click to expand...
Click to collapse
Hard to tell. I'd try this:
1. Flash BL and modem via Odin
2. Boot into recovery (TWRP 2.8.7.0)
3. Wipe /dalvik cache, /data, /system, /cache
4. Flash Emotion rom.
If that fails, download a COI3 stock rom from SamMobile, flash it via Odin, then try again.
Ah, the sweet moment when your phone finally boots up and runs. I can't tell how many times im the past years I believed I had murdered my phone.
Xelasarg said:
Hard to tell. I'd try this:
1. Flash BL and modem via Odin
2. Boot into recovery (TWRP 2.8.7.0)
3. Wipe /dalvik cache, /data, /system, /cache
4. Flash Emotion rom.
If that fails, download a COI3 stock rom from SamMobile, flash it via Odin, then try again.
Ah, the sweet moment when your phone finally boots up and runs. I can't tell how many times im the past years I believed I had murdered my phone.
Click to expand...
Click to collapse
Hi,
thanks for the reply. I also installed phone info. After the flash from modem and boot loader, phone info displays the new BL but an empty CP...
I also tryed to flash the COI3 modem and bootloader found on alexndr ROM but with the same result
Do you think it is because I flashed COI3 Modem on a COH4 firmware? This means that flashing emotion will "repair" it?
COI3 Firmware is not availlable for Switzerland for the moment...
oliverw68 said:
Hi,
thanks for the reply. I also installed phone info. After the flash from modem and boot loader, phone info displays the new BL but an empty CP...
I also tryed to flash the COI3 modem and bootloader found on alexndr ROM but with the same result
Do you think it is because I flashed COI3 Modem on a COH4 firmware? This means that flashing emotion will "repair" it?
COI3 Firmware is not availlable for Switzerland for the moment...
Click to expand...
Click to collapse
Flashing a custom rom won't repair your modem. You can try, of course, but I doubt that will fix it. If nothing helps, you can start from scratch, flash the older OH4 firmware with Odin, make sure everything's working, then update BL and Modem, and flash Emotion rom. I hope you've made a backup of all your stuff?