This is available.
http://download.chainfire.eu/585/CF-Root/CF-Auto-Root/CF-Auto-Root-trltespr-trltespr-smn910p.zip
Obs said:
This is available.
http://download.chainfire.eu/585/CF-Root/CF-Auto-Root/CF-Auto-Root-trltespr-trltespr-smn910p.zip
Click to expand...
Click to collapse
yay another root thread!
Didnt see an actual Chainfire CF-Autoroot post is all.
I'm rooted with the tmo version but I'll try this one too. I have a bad stutter constantly and wonder if that has anything to do with it
So has anyone try rooting using this method?
Yup
fatboypup said:
Yup
Click to expand...
Click to collapse
Well every time i try to and i get to the step of turning my phone off and go into odin it never shows up on the com port.
It works!
But I can't figure out how to get the wifi tether router to work...I've tried all settings with no luck!
KaDaMuS said:
Well every time i try to and i get to the step of turning my phone off and go into odin it never shows up on the com port.
Click to expand...
Click to collapse
Did you install the Samsung USB drivers?
Have you tried a different USB port on your pc?
If that doesn't work try to Uninstall amd reinstall the Samsung USB drivers.
Anyone else notice tremendous lag after rooting this phone?
Mine has significantly slowed down and lags constantly where as before it was lightning quick. Any fixes for this?
Mine does that no matter which root I used
everlast716 said:
Mine has significantly slowed down and lags constantly where as before it was lightning quick. Any fixes for this?
Click to expand...
Click to collapse
Bralgar said:
Mine does that no matter which root I used
Click to expand...
Click to collapse
Did you install exposed?
Sent from my Nexus 7 using Tapatalk
BigJPNut said:
Did you install exposed?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yep.... Is that the cause?
I rooted with the T-mo version of chainfire (before the Sprint version was available).
How do I revert/unroot to stock so I can then root via the Sprint version?
Bralgar said:
Yep.... Is that the cause?
Click to expand...
Click to collapse
Its been reported many times..so yes
Sent from my Nexus 7 using Tapatalk
BigJPNut said:
Its been reported many times..so yes
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Many times where? I've only been in this forum with not one mention. That's fine I did an Odin reflash of the stock rom, so all is good again
---------- Post added at 02:32 AM ---------- Previous post was at 02:11 AM ----------
Veereihen6 said:
I rooted with the T-mo version of chainfire (before the Sprint version was available).
How do I revert/unroot to stock so I can then root via the Sprint version?
Click to expand...
Click to collapse
Open SuperSu and go to settings and click on permanent unroot
Bralgar said:
Many times where? I've only been in this forum with not one mention. That's fine I did an Odin reflash of the stock rom, so all is good again
---------- Post added at 02:32 AM ---------- Previous post was at 02:11 AM ----------
Open SuperSu and go to settings and click on permanent unroot
Click to expand...
Click to collapse
Look in the "Note 4 is rooted" thread or almost every other thread that mentions lagging while rooted -- it's been clearly defined as being Xposed causing it at the moment. Root on it's OWN should never cause any lagging issues like that.
Bralgar said:
Many times where? I've only been in this forum with not one mention. That's fine I did an Odin reflash of the stock rom, so all is good again
---------- Post added at 02:32 AM ---------- Previous post was at 02:11 AM ----------
Open SuperSu and go to settings and click on permanent unroot
Click to expand...
Click to collapse
Read here...many instances.
http://forum.xda-developers.com/showthread.php?t=2898343
Sent from my SM-N910P using Tapatalk
Does this trip knox?
mikeone33 said:
Does this trip knox?
Click to expand...
Click to collapse
Yes, everyone needs to quit asking that. And no there will most likely never be a way to root without tripping it, so just root.
Related
Trying to restore my but im having issues. I follow guide now that i unroot i cant get any wifi but 3g is working find and if i go back to my old rom i cant get any 3g or 4g but i get wifi its really weird.
Getting
Kernel is not seandroid enforcing
and
set warranty bit kernel
messages when booting my phone not sure if that has to do with it but i thought it was clean stock install i did what ever guide said.
We're gonna need some more info about your phone. This forum is for AT&T and Canadian S4s. Which one do you have? (i337 is AT&T and i337M is Canadian) And with that said, which firmware were you on before you did this?
MrKhozam said:
We're gonna need some more info about your phone. This forum is for AT&T and Canadian S4s. Which one do you have? (i337 is AT&T and i337M is Canadian) And with that said, which firmware were you on before you did this?
Click to expand...
Click to collapse
I have a bell SGH I337M. Any way what is happening is i cant get wifi to work at all now that i went back to stock and im getting what i listed above when i boot my phone yet i went back to store firmware. I have a warranty on phone but i dont think i can send it back becase it says Kernel is not seandroid enforcing and set warranty bit kernel which i guess shows its been rooted so my warranty with bell wont work and i can get rid of that message or get wifi to work. Also my phone is laggy i cant even operate it keeps saying not responding do you want to close.
I think i did unroot all correctly put it into download mode flashed tar file for bell i337M firmware but i still am getting this message on boot, wifi not turning on at all and like i said phone is laggy unusable.
I also googled how to get rid of the message at boot everyone said to Flash stock firmware which i did but its not gone i think this phone is 100% ****ed.
If anyone could help it would be greatly appreciated other wise im forced to get a new phone.
Even if i could just get rid of that thing on boot i could at least repalce my phone so its looks like its not rooted.
Also rom i installed b4 was GRAVITON maybe i did something wrong with that and no wifi wont work i need to flash a kernel that will work with bell s4 but i have no idea what one to use.
signature
cooper56 said:
Also rom i installed b4 was GRAVITON maybe i did something wrong with that and no wifi wont work i need to flash a kernel that will work with bell s4 but i have no idea what one to use.
Click to expand...
Click to collapse
Try what's in my signature.
---------- Post added at 03:15 AM ---------- Previous post was at 03:12 AM ----------
cooper56 said:
Also rom i installed b4 was GRAVITON maybe i did something wrong with that and no wifi wont work i need to flash a kernel that will work with bell s4 but i have no idea what one to use.
Click to expand...
Click to collapse
Try what's in my signature. Ignore "posts 1 and 2 unless you are mk2"
seedeh said:
Try what's in my signature.
---------- Post added at 03:15 AM ---------- Previous post was at 03:12 AM ----------
Try what's in my signature. Ignore "posts 1 and 2 unless you are mk2"
Click to expand...
Click to collapse
Ok ty ill give it a try thanks for the response.
Now my phone wont boot i get samsung logo now black screen.
cooper56 said:
Now my phone wont boot i get samsung logo now black screen.
Click to expand...
Click to collapse
That happened after you tried the thing in my signature?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
seedeh said:
That happened after you tried the thing in my signature?
Sent from my SAMSUNG-using Tapatalk
Click to expand...
Click to collapse
Yes i have a bell s4 not sure if thats why. Or maybe i did it wrong im not tech savy.
Since it does say at&t . It did get rid of the Kernel is not seandroid enforcing it just would not boot and it still said set warranty bit kernel.
I flashed stock firmware again and can use it thing is i dont get any sound, no wifi. and i cant use phone function at all or go to my voice mall but it says i have full bars.
cooper56 said:
Yes i have a bell s4 not sure if thats why. Or maybe i did it wrong im not tech savy.
Click to expand...
Click to collapse
Did you do MK3 or MK2 and did it match your phone? Or was your phone something else?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
---------- Post added at 04:13 AM ---------- Previous post was at 04:09 AM ----------
cooper56 said:
Yes i have a bell s4 not sure if thats why. Or maybe i did it wrong im not tech savy.
Since it does say at&t . It did get rid of the Kernel is not seandroid enforcing it just would not boot and it still said set warranty bit kernel.
I flashed stock firmware again and can use it thing is i dont get any sound, no wifi. and i cant use phone function at all or go to my voice mall but it says i have full bars.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2277162
Sent from my SAMSUNG-SGH-I337 using Tapatalk
seedeh said:
Did you do MK3 or MK2 and did it match your phone? Or was your phone something else?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Umm not sure i used w/e in 3rd post and flash it think it was ★RECOVERY★MODEM★BOOT★
cooper56 said:
Umm not sure i used w/e in 3rd post and flash it think it was ★RECOVERY★MODEM★BOOT★
Click to expand...
Click to collapse
Check my second post.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
seedeh said:
Check my second post.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
All-In-One-i337Mk2-tar.md5?
cooper56 said:
All-In-One-i337Mk2-tar.md5?
Click to expand...
Click to collapse
I meant look at this thread: http://forum.xda-developers.com/showthread.php?t=2277162
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I still dont get it im confused. Guess ill get a new phone.
cooper56 said:
i still dont get it im confused.
Click to expand...
Click to collapse
Follow the instructions of that thread.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
---------- Post added at 04:39 AM ---------- Previous post was at 04:31 AM ----------
cooper56 said:
I still dont get it im confused. Guess ill get a new phone.
Click to expand...
Click to collapse
You're not serious about getting a new phone, are you?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Tried that same thing...
Looks like i need new phone.
cooper56 said:
Tried that same thing...
Looks like i need new phone.
Click to expand...
Click to collapse
Research more...
Sent from my SAMSUNG-SGH-I337 using Tapatalk
seedeh said:
Research more...
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I am going to piggy back on this thread....
I have a ATT S4 with MF3/root/safestrap. I want to sell the phone and get back to stock. Can I just do the settings->factory reset? Do I need to use ODIN?
thanks.
cooper56 said:
Tried that same thing...
Looks like i need new phone.
Click to expand...
Click to collapse
First... you need to flash Bell firmware not At&T.... would be helpful to know where you actually started from... were you on 4.2 or 4.3? There is a thread here that has all the stock firmware but you need to pick the right one... if you were on 4.3 you need the MK6 firmware...as long as you can reach download mode your not hooped yet....
http://forum.xda-developers.com/showthread.php?t=2696537
Link below ~
its ready
http://download.chainfire.eu/408/CF-Root/CF-Auto-Root/CF-Auto-Root-kltespr-kltespr-smg900p.zip
it now says our model is supported.... who will be first to test it out, lol
evilbeef54 said:
it now says our model is supported.... who will be first to test it out, lol
Click to expand...
Click to collapse
Here goes nothing..
camdz said:
Here goes nothing..
Click to expand...
Click to collapse
fingers crossed, good luck
evilbeef54 said:
fingers crossed, good luck
Click to expand...
Click to collapse
The hardest part was waiting for the Samsung drivers to install onto my laptop!
It worked..and Im rooted!
There was a warning that popped up when I opened SuperSU that says KNOXX is enabled, and asked if I wanted to try to disable. I chose "yes" and it prompted me that it is now disabled. Im not sure what that means though? I was under the impression KNOXX was here to stay?
camdz said:
The hardest part was waiting for the Samsung drivers to install onto my laptop!
It worked..and Im rooted!
Click to expand...
Click to collapse
awesome, me too, rooted now, de-bloating commences
I love coming home from the Sprint store and being able to root immediately. Here we go!
EDIT: 30 seconds later, I'm rooted.
it doesnt seem to like it when you delete system apps through TiBu, lol, TiBu crashed upon deleteing the lumina tool bar and one of the other apps, they went away though so we win, lol
So glad to have the root (it worked just like it said). Time to clean up the bloatware now. Thanks!
Works!
Yes, it did only take 30 seconds. No drivers needed on Win 8 update 1 update 1.
Im rooted. That was easy. Thx to Chainfire. Amazing
SPRINT :C
Won't let my download the zip, just tells my its corrupt on both my laptop and PC, any ideas?
So this is use with Odin, correct?
Sent from my SPH-L710 using XDA Premium 4 mobile app
camdz said:
The hardest part was waiting for the Samsung drivers to install onto my laptop!
It worked..and Im rooted!
There was a warning that popped up when I opened SuperSU that says KNOXX is enabled, and asked if I wanted to try to disable. I chose "yes" and it prompted me that it is now disabled. Im not sure what that means though? I was under the impression KNOXX was here to stay?
Click to expand...
Click to collapse
That disables the software side of KNOX. The part in the bootloader is still there
eloko said:
So this is use with Odin, correct?
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yup
Tether? what is everyone using to tether once rooted?
evilbeef54 said:
awesome, me too, rooted now, de-bloating commences
Click to expand...
Click to collapse
Pretty sure it does but did it trip the KNOX counter?
Did anyone else loss their wifi with rooting their phone?
---------- Post added at 05:19 AM ---------- Previous post was at 05:13 AM ----------
ernicoats said:
Did anyone else loss their wifi with rooting their phone?
Click to expand...
Click to collapse
Fixed seems I had to put in airplane mode then back out.
I've gotten conflicting results when reading the forums about whether or not the G928T is rootable via Arter97's kernel. In how to guides I see evidence that it might be but on the Arter97 dev thread it says coming soon.. yet at the same time in update 3.6 it says "added support for T...".
Can anyone confirm if the Arter97 Kernel can be used to get root access on a G928T running 5.1.1?
Also, I woke up this morning to an update from T-Mobile... I'm assuming I shouldn't take the update if I plan to root? Anyone have any suggestion there?
The version #'s are as follows: G928TUVU2COI5/G928TTMB2COI5/G928TUVU2COI5 in the update details...
Am curious to know this too. I looked at the thread for arter97 and....well it looked too complicated for me. I just need to root, don't need anything else. I'm not very tech savvy and only know how to use Odin.
Try kingroot
Safe and easy!
Sent from my MT27i using XDA mobile app
Fama_Sicura said:
I've gotten conflicting results when reading the forums about whether or not the G928T is rootable via Arter97's kernel. In how to guides I see evidence that it might be but on the Arter97 dev thread it says coming soon.. yet at the same time in update 3.6 it says "added support for T...".
Can anyone confirm if the Arter97 Kernel can be used to get root access on a G928T running 5.1.1?
Also, I woke up this morning to an update from T-Mobile... I'm assuming I shouldn't take the update if I plan to root? Anyone have any suggestion there?
The version #'s are as follows: G928TUVU2COI5/G928TTMB2COI5/G928TUVU2COI5 in the update details...
Click to expand...
Click to collapse
Most definitely, im rooted now via arters kernel.
Sent from my SM-G928T using Tapatalk
Piyush jaiswal said:
Try kingroot
Safe and easy!
Sent from my MT27i using XDA mobile app
Click to expand...
Click to collapse
I downloaded the apk and it said it's not available for the G928T. Would the desktop version work differently? Thank you.
seansc144 said:
Most definitely, im rooted now via arters kernel.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Is there a step by step guide for that? I don't know where to download and where to go for instructions. Sorry for my lack of knowledge.
no root as for now
My G928T is rooted with arter97 kernel. Read through the thread, it's referenced about half way through. He just hasn't updated the original post.
---------- Post added at 10:30 AM ---------- Previous post was at 10:23 AM ----------
Skitariister said:
Is there a step by step guide for that? I don't know where to download and where to go for instructions. Sorry for my lack of knowledge.
Click to expand...
Click to collapse
ShyamSasi put together a straight forward thread on how to root:
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
There is a link on Arter97's post for the kernel and recovery:
http://forum.xda-developers.com/s6-edge-plus/development/arter97-kernel-galaxy-s6-edge-plus-t3189913
failsaf3 said:
My G928T is rooted with arter97 kernel. Read through the thread, it's referenced about half way through. He just hasn't updated the original post.
---------- Post added at 10:30 AM ---------- Previous post was at 10:23 AM ----------
ShyamSasi put together a straight forward thread on how to root:
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
There is a link on Arter97's post for the kernel and recovery:
http://forum.xda-developers.com/s6-edge-plus/development/arter97-kernel-galaxy-s6-edge-plus-t3189913
Click to expand...
Click to collapse
Well...I tried to follow the instructions but now my phone is stuck in a ON/OFF loop....it restarts repeatedly....I don't know what to do aside from getting the official firmware....wherever that is.
I think my mistake is that I selected an option that says "Root phone"
Okay, managed to get back to normal.
For extra info I'm using the Tmobile G928-T S6 Edge +, and it seems like there's no root method for that particular model.
100% rooted now.
Was easy as pie.
I used the How To article on the forums.
Fama_Sicura said:
100% rooted now.
Was easy as pie.
I used the How To article on the forums.
Click to expand...
Click to collapse
This one?
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
I used this one but still messed it up. Thanks in advance.
Skitariister said:
This one?
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
I used this one but still messed it up. Thanks in advance.
Click to expand...
Click to collapse
Yes this one.
the only issue I had during the process is this:
After installing the custom recovery I was still holding down the volume down button instead of the volume up button to reboot.
I followed this step for step and downloaded all of the newest downloads of everything and it worked like a charm.
At what point did you mess it up?
Hello, Is there currently no way to root the SM-G928T without tripping knox?
I too am getting mixed and confusing results when searching...All I need is root, nothing else.
Thank you!
Piyush jaiswal said:
Try kingroot
Safe and easy!
Sent from my MT27i using XDA mobile app
Click to expand...
Click to collapse
not yet
Just checking
---------- Post added at 10:38 PM ---------- Previous post was at 10:34 PM ----------
Had to try and go ahead and route problems with my windows 10 in USB connection or something bootloop it. Anybody want to buy a paperweight? Ugh! happy new years anyway!
KJThaDon said:
Hello, Is there currently no way to root the SM-G928T without tripping knox?
I too am getting mixed and confusing results when searching...All I need is root, nothing else.
Thank you!
Click to expand...
Click to collapse
Not sure about that. I just flashed a new kernel fast any easy way. But triggered counter
Is this possible I've seen somethings on the Internet but don't know what to trust or what works
JReeher said:
Is this possible I've seen somethings on the Internet but don't know what to trust or what works
Click to expand...
Click to collapse
without pc yes you can
use a Windows tablet !!!
- tapatalked - from my VANTABLACK S7 EDGE
Yes u can....
Try Kingroot
Sent from my SM-G935F using Tapatalk
Perfectdevil said:
without pc yes you can
use a Windows tablet !!!
- tapatalked - from my VANTABLACK S7 EDGE
Click to expand...
Click to collapse
So this won't work ?
Download it from xda
Sent from my SM-G935F using Tapatalk
---------- Post added at 07:45 PM ---------- Previous post was at 07:42 PM ----------
But reed instructions carefully to make it works
Sent from my SM-G935F using Tapatalk
JReeher said:
So this won't work ?
Click to expand...
Click to collapse
I find that this method is the best to root your device. Just select SM-G935F from the list and follow the instructions.
JReeher said:
So this won't work ?
Click to expand...
Click to collapse
Did it work for you?
TheSproker said:
I find that this method is the best to root your device. Just select SM-G935F from the list and follow the instructions.
Click to expand...
Click to collapse
I did this when I first got the Snapdragon S7 Edge and it worked but bugs, and plus, if I can't use Samsung Pay and Samsung Health, then this is pointless to root. I reflashed to default firmware, and then I used T-mobile Unlock app and unlocked sim on phone, then I flashed the Unlocked firmware from Sammobile (TMK) onto the phone. Now I do not have T-mobile bloat and boot. I also get OTA updates 2 weeks ahead of normal T-mobile updates. So this root is not good to me. Plus, Oreo is just any day now with OTA, and I am willing to be a little more patient.
Like the title says, the new T-Mobile version of the S2 with the Snapdragon processor. Is there any type of development being looked at for it? I'm looking to be able to debloat it at the very least. Any knowledge of that here at all?
UPDATE: So looks like that TWRP for the T819 works great for the T818 devices. Go to this thread https://forum.xda-developers.com/ta...2-1-galaxy-tab-s22016-sm-t713-t3390627/page67 and follow the directions there.
All thanks and credit to @ashyx and any other TWRP devs for this.
I too would like to know about this. I just want root. I read that 813 may be possible because of processor but I don't know
piezan said:
I too would like to know about this. I just want root. I read that 813 may be possible because of processor but I don't know
Click to expand...
Click to collapse
Don't know if you noticed in the TWRP thread, but we finally have our answer. Try using TWRP for the T819. I'll be giving it a try after work. If you do it sooner can you let me know if it works? One of us is going to have to be the guinea pig.
justibasa said:
Don't know if you noticed in the TWRP thread, but we finally how our answer. Try using TWRP for the 819T. I'll be giving it a try after work. If you do it sooner can you let me know if it works. One of us is going to have to be the guinea pig.
Click to expand...
Click to collapse
i am trying it now and it just fails.
piezan said:
i am trying it now and it just fails.
Click to expand...
Click to collapse
Did you go into developer settings and make sure OEM unlocking was checked? Says in the TWRP op that you may have to do that.
justibasa said:
Did you go into developer settings and make sure OEM unlocking was checked? Says in the TWRP op that you may have to do that.
Click to expand...
Click to collapse
working 100 percent i forgot to uncheck autoroot
---------- Post added at 06:42 AM ---------- Previous post was at 06:37 AM ----------
next we need a permissive kernel any ideas?
piezan said:
working 100 percent i forgot to uncheck autoroot
---------- Post added at 06:42 AM ---------- Previous post was at 06:37 AM ----------
next we need a permissive kernel any ideas?
Click to expand...
Click to collapse
Deleted
justibasa said:
There is a permissive kernel on the development section for the 819. It might be worth a try. https://forum.xda-developers.com/tab-s2/development/kernel-sm-t713-permissive-kernel-t3425938/page17
Click to expand...
Click to collapse
it says 719 and 813 in the op, which would i use?
piezan said:
it says 719 and 813 in the op, which would i use?
Click to expand...
Click to collapse
Neither of them. I misread. Could have swore I saw 819. My bad dude. Got a little overexcited when I saw TWRP was working.
justibasa said:
Neither of them. I misread. Could have swore I saw 819. My bad dude. Got a little overexcited when I saw TWRP was working.
Click to expand...
Click to collapse
thats fine, thats why i waited. I am now going to test xposed and let you know.
piezan said:
thats fine, thats why i waited. I am now going to test xposed and let you know.
Click to expand...
Click to collapse
Yeah just wanted to check with you to make sure root worked, and what root you used. SuperSU or PHH?
justibasa said:
Yeah just wanted to check with you to make sure root worked, and what root you used. SuperSU or PHH?
Click to expand...
Click to collapse
super su. it installs when you do this...https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
make sure you get the encryption installed before supersu
---------- Post added at 07:27 AM ---------- Previous post was at 07:06 AM ----------
piezan said:
super su. it installs when you do this...https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
make sure you get the encryption installed before supersu
Click to expand...
Click to collapse
ok it didnt install but now it keeps rebooting into recovery every time i system reboot. even after restore.
piezan said:
super su. it installs when you do this...https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
make sure you get the encryption installed before supersu
---------- Post added at 07:27 AM ---------- Previous post was at 07:06 AM ----------
ok it didnt install but now it keeps rebooting into recovery every time i system reboot. even after restore.
Click to expand...
Click to collapse
Deleted
sssoooo......
what wasoutcome? root work?
jcole6197 said:
what wasoutcome? root work?
Click to expand...
Click to collapse
Yes it works.
Anyone tried it on the T818a?
would love to update my device and get it rooted but im not seeing much development on it. Anyone know it this works on the AT&T S2 (SM-T818?)