Related
Hi,
I've updated my Defy to the Chinese 2.21 Firmware a few days ago following this How-To http://forum.xda-developers.com/showthread.php?t=919320 and everything worked fine for a couple of days but now I have strange problems with my battery:
--if I connect the mobile to the power supply nothing happens. The white LED sometimes goes on for a split second but then stays black.
--if i connect the mobile to the computer the white led goes on and it starts charging the battery, but after a few minutes the mobile starts booting by itsself and a few moments after i see the motorola symbol the white LED is going off and the mobile boots up to froyo but it switches itsself off very soon because the battery is low.
Any ideas how to make my mobile usable again?
Thank you
If you got the chance, try a different battery...
i read somewhere that someone had luck with that.
In a few days I will get a second defy from a friend, then i can find out and tell you if it is a problem of the battery, the usb port or the software...
Moto Defy not charging at all
woegel said:
In a few days I will get a second defy from a friend, then i can find out and tell you if it is a problem of the battery, the usb port or the software...
Click to expand...
Click to collapse
Hi, Any update on this; My Defy , running on CM7.1 for sometime now is having the exact problem)
me too!!! see here!
http://forum.xda-developers.com/showthread.php?t=2092087
just fixed the same problem
matrix866 said:
me too!!! see here!
http://forum.xda-developers.com/showthread.php?t=2092087
Click to expand...
Click to collapse
Hi guys,
I`ve just had the same problem with my green lense defy.
basically when you recover using the chinese sbf you get the defy + kernel with it so it becomes a red lense/ defy+ as far as the battery charging is concerned.
So you need to install the battery fix for the red lense or defy+
there's a updated fix for the cm10
copy the zip to your sd card and flash the zip from recovery and all will be well. either via the usb if this is working and you have enough charge left or put the sd card in your card reader or adaptor on pc.
You may need to charge the battery using macguyver method (not more than half an hour and stop if battery starts getting warm or it may go bang.) or preferably 3rd party lion charger £19.99 in maplins at the moment.
just on my way out the door so haven't got time to post the links but easy to find if you search this forum.
good luck
timb138 said:
Hi guys,
I`ve just had the same problem with my green lense defy.
basically when you recover using the chinese sbf you get the defy + kernel with it so it becomes a red lense/ defy+ as far as the battery charging is concerned.
So you need to install the battery fix for the red lense or defy+
there's a updated fix for the cm10
copy the zip to your sd card and flash the zip from recovery and all will be well. either via the usb if this is working and you have enough charge left or put the sd card in your card reader or adaptor on pc.
You may need to charge the battery using macguyver method (not more than half an hour and stop if battery starts getting warm or it may go bang.) or preferably 3rd party lion charger £19.99 in maplins at the moment.
just on my way out the door so haven't got time to post the links but easy to find if you search this forum.
good luck
Click to expand...
Click to collapse
Thanks, but I have not used Chinese sbf, regular CM7.2 for my defy ( green lens); With macguyver I got the defy charged up, it boots up and all; Only problem is that anything with the usb is not working, neither charging, nor recognizing ( by RSdLite, Motorola Media link, or Windows). I have been using CM7.2 for months without any problem; Also after charging via macguyver I tried re installing to old backed up Motodefy ROM, and also reinstalled CM7, as I said evertthing works except anything connected to USB, tried also different computers , uninstalled medialink, re-installed RSDLite all the works
will try some more; Any hints links welcome. Thanks
alexcpn said:
Thanks, but I have not used Chinese sbf, regular CM7.2 for my defy ( green lens); With macguyver I got the defy charged up, it boots up and all; Only problem is that anything with the usb is not working, neither charging, nor recognizing ( by RSdLite, Motorola Media link, or Windows). I have been using CM7.2 for months without any problem; Also after charging via macguyver I tried re installing to old backed up Motodefy ROM, and also reinstalled CM7, as I said evertthing works except anything connected to USB, tried also different computers , uninstalled medialink, re-installed RSDLite all the works
will try some more; Any hints links welcome. Thanks
Click to expand...
Click to collapse
When the problem starter?? I have the same problem! If I connect the phone to PC the white led turns on but doesn't charge and if I put it in download mode the computer doesn't recognise the phone and give me error 43 even if I have the driver installed.
matrix866 said:
When the problem starter?? I have the same problem! If I connect the phone to PC the white led turns on but doesn't charge and if I put it in download mode the computer doesn't recognise the phone and give me error 43 even if I have the driver installed.
Click to expand...
Click to collapse
It started last week, I guess last Tuesday
alexcpn said:
It started last week, I guess last Tuesday
Click to expand...
Click to collapse
Sorry I mean why it happened?
Did you do anything?
matrix866 said:
Sorry I mean why it happened?
Did you do anything?
Click to expand...
Click to collapse
No did nothing; My son was playing angry birds and battery was down to 3%. Is it possible to install usb drivers for cm7.2 using 2ndInit
alexcpn said:
No did nothing; My son was playing angry birds and battery was down to 3%. Is it possible to install usb drivers for cm7.2 using 2ndInit
Click to expand...
Click to collapse
I did not touch the phone for a week I guess aftter this, now it is working; strange
Hi all,
I think I got a sourious Problem with my defy (green Lens).
I was aktually running on CM7.2 Stable as out of a sudden the call was aborted and the defy dead. But the Battery was at perhapse 20%.
At home I pluged it in and was schowing to charge.... (showing the flash in the Battery symbol at 5% and red LED)
Next day still at 5%. so nothing charged. So I changed the battery with my second defy (running on CM10) 100% loaded. But the Phone shows me still 5%.
Wenn phone is pluged in I can boot and work with it, I also can go into the Custom recovery and into the bootloader. But only when I pluged the phone and not when connected to the computer. Also bootloader shows battery low, even with a 100% loaded battery, so I can't Flash anything with RSD.
I tried everything I know, installing new roms (at the moment its at cm10)
Wiping everything... also Battery. Tried battery recalibration apps. and even some battery fixes for Defy+ but nothing changed something.
My only suggestion ist that it must be a hardware defekt..... anybody some other Ideas, what I could try?
Any Ideas how much it will cost to repair? Warrenty surely lost?
Thanks in advance. Andy
Nobody any Ideas?
maybe you should try to reflash with your stock SBF file you had b4 installing CM7 and see what happens... if the battery doesn't show right even then, I'm afraid it might be smth with your hardware...
pppprrrr said:
maybe you should try to reflash with your stock SBF file you had b4 installing CM7 and see what happens... if the battery doesn't show right even then, I'm afraid it might be smth with your hardware...
Click to expand...
Click to collapse
Problem ist, that i can install any custom roms using custom recovery. But I can't flash something over RSDLite, because Handy doesn't start without beeing plugged in (plugged into pc isn't enough) and even then it shows battery at 5% even if battery ist 100% Full (Witch I can test, because I got a second defy) So I wouldn't be able to Flash because Bootloder says, not enough battery.
I don't know how I should flash.....
Did you test to restore nandroid ? If you didn't make nandroid backup when all was good, it's an error...
If there is a PC on Linux near you, you can test sbf_flash (which works very well for me on my Salix OS), eventually with the -f (force) option.
Hi,
no I don't have a nandroid backup, from this phone.... Is ist possible to use a nandroid backup of another phone? As I said, I got a second defy, so I could take one from this.
just wipe data n reflash.
connect the phone to your pc/laptop tru the cable.. for a night.. then boot. wipe data and reflash, else there is a methid where u cut open the usb cable and give the red and black to the battery.
By now I own an HTC ONE S .... so it's not so important, but I would like to repair it anyway....
naga123 said:
connect the phone to your pc/laptop tru the cable.. for a night.. then boot.
Click to expand...
Click to collapse
No Problem, device boots, when on cable......
naga123 said:
wipe data and reflash,
Click to expand...
Click to collapse
No Problem I can Wipe an flash as much as I want.... device is working as long cable is pluged in..... but Battery will never charge
Or even worse..... the battery shows 5% even when full! And device is powered off, when I unplug the cable
naga123 said:
else there is a methid where u cut open the usb cable and give the red and black to the battery.
Click to expand...
Click to collapse
what do you mean with this? Don't understand? Link?
Thanks so far...
Does anybody know what Torx srewdriver I need to open the defy?
Thanks
Sordalong said:
Does anybody know what Torx srewdriver I need to open the defy?
Thanks
Click to expand...
Click to collapse
Hi
I have Same Problem.
1- Flash Froyo Kernel .
2- Flash Quarx CM10 2nd-boot (10-01-2013)
3- Flash Red Lens battery Fix
If These Not Worked Ur Battery Dead.
4- Buy New Battery
Sordalong said:
Does anybody know what Torx srewdriver I need to open the defy?
Thanks
Click to expand...
Click to collapse
Tx no 5
Your problems with Defy seems to be a hardware problem due to a fried condenser from power circuitry.
pgreed said:
Tx no 5
Your problems with Defy seems to be a hardware problem due to a fried condenser from power circuitry.
Click to expand...
Click to collapse
Thanks... but I resigned to open it by my self and sent it to dat repair.... I'm also sure that it have to be an hardware issue. I'll see if they will repair it on garanty or not...
Thanks
Hello everyone !
This is my first ever post in this forum ,though i have learned alot from this forum .
Few days back i successfully rooted my phone and after that flashed custom rom without having back up of factory Rom but during this process my mobile stuck .
RSD was unable to detect my phone neither i was able to completely charge my battery.
Last day i came across the link
http://forum.xda-developers.com/showthread.php?t=892026
and set up everything as it is shown there.
Successfully flashed ROM UK Retail 2.2.2 Service sbf (Build number: JRDNEM_U3_3.4.2_177-003)
http://and-developers.com/sbf:defy
Phone was up but with warning message battery is invalid ,can't charged the battery.
I reflashed the ROm in hope that it will solve my problem but all was in vain .
When battery is fully drained ,i connect my mobile via usb .It boots up successfully but fails to recognize my battery showing a question mark on battery meter.
I can charge my battery via external USB .
Help me please !
Moto_defy said:
Hello everyone !
This is my first ever post in this forum ,though i have learned alot from this forum .
Few days back i successfully rooted my phone and after that flashed custom rom without having back up of factory Rom but during this process my mobile stuck .
RSD was unable to detect my phone neither i was able to completely charge my battery.
Last day i came across the link
http://forum.xda-developers.com/showthread.php?t=892026
and set up everything as it is shown there.
Successfully flashed ROM UK Retail 2.2.2 Service sbf (Build number: JRDNEM_U3_3.4.2_177-003)
http://and-developers.com/sbf:defy
Phone was up but with warning message battery is invalid ,can't charged the battery.
I reflashed the ROm in hope that it will solve my problem but all was in vain .
When battery is fully drained ,i connect my mobile via usb .It boots up successfully but fails to recognize my battery showing a question mark on battery meter.
I can charge my battery via external USB .
Help me please !
Click to expand...
Click to collapse
Reflash with RSD the bigger sbf 3.43 which you find (177-009). after flashing do a factory reset.
pgreed said:
Reflash with RSD the bigger sbf 3.43 which you find (177-009). after flashing do a factory reset.
Click to expand...
Click to collapse
I have flashed three variants of official sbf but still i'have the same problem
Flash Walter batt patch
Patch doesn't help
pgreed said:
Flash Walter batt patch
Click to expand...
Click to collapse
Sorry for being late .
I have flashed every patch but still have the same problem.
Right now i have CM9 kernel 2.6.32.9 .One of the interesting thing i noted is that custom boot loader shows the right battery status but android battery says "unknown 100%" .At first i thought i had green lense but later via defylense app i came to know that i have red lens(it may be erroneous because i have already patched red lens batt fix files) .Few days back i tried dual boot Cm9 and Cm7 but none of them recognized my battery.
Please help me ......
Moto_defy said:
Sorry for being late .
I have flashed every patch but still have the same problem.
Right now i have CM9 kernel 2.6.32.9 .One of the interesting thing i noted is that custom boot loader shows the right battery status but android battery says "unknown 100%" .At first i thought i had green lense but later via defylense app i came to know that i have red lens(it may be erroneous because i have already patched red lens batt fix files) .Few days back i tried dual boot Cm9 and Cm7 but none of them recognized my battery.
Please help me ......
Click to expand...
Click to collapse
I think that you has flashed a sbf with a not optimal BL (eg. you flashed a BL7 or so). For this kind of problem already exist a good topic.
link ?
pgreed said:
I think that you has flashed a sbf with a not optimal BL (eg. you flashed a BL7 or so). For this kind of problem already exist a good topic.
Click to expand...
Click to collapse
link to that thread plz ?
Facing the same problem too!!!! Any solutions :cyclops:
LINK PLS !
Motorola Defy MB525 battery unknown
Same problem here. My Defy was working fine until I installed 0404 Quarx build. Then after a few hours installing and setting up my apps back I did a reboot and the got stuck in the Motorola logo until my battery drained off. USB won't recognize the device but I managed to use an universal charger to get the battery running again but again stuck at Motorola logo so I flashed a new rom using RSD. That got my device booting up again but the "Unknown battery" message started showing up whenever I tried to charge. I spent the whole weekend trying new sbf and battery fixes but none fixes the problem. I even got back the previous Quarx build I was using and still nothing. Is there something else I might have missed?
So I kept trying with different SBFs but none of them work and yesterday I changed back to Epsylon's last rom, which was the first I ever installed in my phone and now Android recognizes when the phone is connected or not, and it shows the "charging" icon but the battery full. In battery status still shows 100% and Unknown. Strangely enough when I go to the bootmenu it starts charging, but only if I keep touching the screen and moving around the menus.
Hy all! (sorry for my bad english)
3 days ago i can't charge my defy (cm10.2)
just turn off phone and put a wall charger
i flash in rsd lite stock rom (bootloader 9.10)
1.
DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8
MOVIES00A.0R_PDS03C_USAJRDNGIBRMOVIES
_P038_A034_M009_Service1FF.sbf
2. flash stock rooted rom
and nothing change
can't charge phone : (
any ideas ?
Hello guys
2 1/2 years with my D802 and in october i change rom because i have bootloop problem (Zip "kernel" for CM12 on CM13...) And... Slow charging appears (Actualy: Latest CM 13 Nightly )
Problem:
Not charging when boot in android in 99% of times, and randomly 10-1500mA charging when i have luck
Charging slow phone Off and in TWRP but it's random, sometimes nice charging ( 200mA-1500mA )
No USB connection when Android is on ( No MTP, ADB, Charge, no Windows sound ) (i use ADB wifi) but USB is okey in TWRP ( No adb but MTP ok and charging ok sometimes )
What i tried:
Other AC Power
Other USB Cable
Other Rom ( Newest CM 13 Nightly with System/Dalvik/Cache Wipe )
Other Kernel ( Lambda Infinito Stable and Beta N9 with "Fast charge" like Dorimanx Stock Kernel )
New battery ( 20euro in my a*s lol )
Clean the gnat in the usb port
What i don't try:
Go back to Stock Firmware
Change USB plug
If you have same problem solved, tell me please !
Thanks
I thinks i solved the problem...
I found a gnat in the usb port after cleaning it .-.
Phone charging... Nice solution
Edit: Big luck, the gnat don't was the solution
riwan15 said:
I found a gnat in the usb port after cleaning it .-.
Click to expand...
Click to collapse
Dafuq. Funny experience. How the hell does a gnat fit into this tiny hole. I Germany the gnats are up to 10mm long. I would have to mummify or dry it to decrease size. But nice that your phone is back in business.
Lol, phone at 100%, i disconnect the usb cable, wait for 99% and... Not charging again... Now i'm at 37% and crying x)
The solution don't was the gnat x) Only big luck lol
Maybe solution:
In TWRP (phone at 0% and plugged) the battery don't appear in the top (normal) but i disabled the MTP and the battery show up and charging ! I retry when the phone is a 0% and confirm this fix !
(Sorry if i alone or something but a pass 1week to search for fix and there is no fix in google, only "hardware" problem but i don't thinks the hardware problem exist if the phone don't touch water or has fallen)
I hope this thread is gonna help somebody
Maybe change TWRP version can fix the problem ? I'm gonna try it after looking if disable the MTP is a fix
Edit: TWRP from 2.8.6.1 to 3.0.2-1 (Blastagator's TWRP) fixed half of the problem, now 1/2 charging phone off and always in recovery, left phone with android on and the problem is fix :3
Problem "fixed"
The only way for charging is to plug when the phone is booting ( on lg screen, before recovery or android ) In recovery the charging is safe, in android boot i need sometimes to plug/unplug after boot to start charging
The problem is now not really one for me, just a gesture to do ( Phone working, new battery = 2days phone on !! I'm happy like 2years ago)
For USB Data, no fix found, but Airdroid and ADB Wi-fi are in the party
I hope this thread can help
Info:
D802 - TWRP 3.0.2-1 - CM13 Nightly Dec 03 2016 - No kernel - Xposed V87