Related
as you all probably know paul-xxx released an ICS rom for our X8 which is apparently based on CM9 (correct me if i am wrong). however it has a lot of problems like WiFi, Camera etc. it also has kernel compatibility issues like gsm working on nAa kernel but not on alfs kernel and so on (again correct me if i am wrong). so i have decided that i will set about the task of building a compatible kernel for this rom. however that is not possible alone by me. i need the help of expert devs on X8. so let's start, shall we?
i can only can help you in testing , sorry im not an expert, i hope some people help you to compile the kernel !!!!
sorry my bad english !!
as i say any help is greatly appreciated. and could you ask other devs you know to help me out? thanks in advance.
I know that FXP is already doing something for MSM7227 for ICS
It is in their Git, maybe they are planing to port ICS to X10Mini/X10MiniPro/X8, or help on that.
I cant help because I am using W8 and I cannot unlock bootloader. I am sorry but I will help support you guys...
Hit the THANKS button if I helped!!
Sent from my W8 using Tapatalk
RockitOut11 said:
I know that FXP is already doing something for MSM7227 for ICS
It is in their Git, maybe they are planing to port ICS to X10Mini/X10MiniPro/X8, or help on that.
Click to expand...
Click to collapse
u sure about that?
whats the part of "maybe" that you didn't understand?
when i say "maybe", maybe i'm not sure! (funny? no?)
---------- Post added at 01:51 PM ---------- Previous post was at 01:48 PM ----------
https://github.com/freexperia/semc-kernel-msm7x27-ics
What i was talking about
so you want to make kernel with thi sources?
https://github.com/freexperia/semc-kernel-msm7x27-ics
I thought about this myself too but don t have linux on my computer and i would install it but that partitioning... naaah
good luck
EDIT: i didnt refresh the site
RockitOut11 said:
whats the part of "maybe" that you didn't understand?
when i say "maybe", maybe i'm not sure! (funny? no?)
---------- Post added at 01:51 PM ---------- Previous post was at 01:48 PM ----------
https://github.com/freexperia/semc-kernel-msm7x27-ics
What i was talking about
Click to expand...
Click to collapse
perhaps you didnt understand the purpose of my thread. i wanted to create a kernel for paul's ICS. and anyways thanks.
yeah, i know, but i preffer to wait to see if FXP does something
@Xmaster8 But if you want i can compile that FXP kernel for you. I have DualBoot, Ubuntu 10.10 and Windows7
RockitOut11 said:
yeah, i know, but i preffer to wait to see if FXP does something
@Xmaster8 But if you want i can compile that FXP kernel for you. I have DualBoot, Ubuntu 10.10 and Windows7
Click to expand...
Click to collapse
i have a question. in fact 2 questions.
1. can i use this guide to compile a kernel using this source except for the fact that the source will be different (in this case the ICS kernel source that you referred me to)?
2. since FXP kernel has compatibility issues with some roms, will a kernel using their ICS source be compatible with paul's ICS?
hope to see reply soon.
souljaboy11792 said:
i have a question. in fact 2 questions.
1. can i use this guide to compile a kernel using this source except for the fact that the source will be different (in this case the ICS kernel source that you referred me to)?
2. since FXP kernel has compatibility issues with some roms, will a kernel using their ICS source be compatible with paul's ICS?
hope to see reply soon.
Click to expand...
Click to collapse
1. yes
2. maybe, maybe not it all about experiments
is the FXP ICS source complete?
souljaboy and can i ask u something? whats yours skills about these things? are u programmer? thx
/so nothing will be
souljaboy11792 said:
is the FXP ICS source complete?
Click to expand...
Click to collapse
yes they are complete, but maybe not "ICS" at all, i think so
hardly any skill though it doesnt hurt to develop some..lol
RockitOut11 said:
yes they are complete, but maybe not "ICS" at all, i think so
Click to expand...
Click to collapse
what makes you think so?
msm7x27:initial fork [freexperia]
i think this means that they forked the "base" kernel for Msm7x27, so it must be complete.
@souljaboy11792 If you botherd to look at FXP ICS source you will see it's only for es209ra (X10).You can't build this for X8 witout a lot of changes.And what's the point of this thread when you know nothing about kernel building.(Don't mean to be rude)
alfsamsung said:
@souljaboy11792 If you botherd to look at FXP ICS source you will see it's only for es209ra (X10).You can't build this for X8 witout a lot of changes.And what's the point of this thread when you know nothing about kernel building.(Don't mean to be rude)
Click to expand...
Click to collapse
nice to see you alfsamsung,well he needs your expertise cause you know everything in kernel building
I've got this today：
[SAMSUNG OSRC COMMENTS DELIVERY NOTIFICATION]
♦ classification : Mobile Phone ♦
♦ model name : GT-I9300 ♦
Dear Customer,
Thank you for your interest in our product.
We are now in the process of gathering source codes, and it might be finished by this week.
We will let you know a reply to this issue soon.
Sincerely yours,
----- Original Message -----
Sender :xxxxx ([email protected])
Date :2014-07-09 07:10:53 (GMT+09:00)
PLEASE GIVE US WHATEVER YOU HAVE GOT!!!!!
Then,we can wait for a huge change in Custom kernels.
Latest source version of now, is I9300XXUGMK6
We may get source of I9300XXUGND5
I don't really understand , so what would this mean if we got the kernel source...would there be improvements in the kernels we have now?
*just curious*
Sent from my GT-I9300 using xda app-developers app
Pulseuser said:
I don't really understand , so what would this mean if we got the kernel source...would there be improvements in the kernels we have now?
*just curious*
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Improvements maybe in performance and stability.XXUGMK6 has a wake up delay,and memory control is bad.
And I'm hoping that Sammy will give us a 3.4.X kernel....
I'm not good in English and developing,you may ask kernel developers for help.
@Lord Boeffla
@psndna88
@Yank555
@JustArchi
Thanks.
Huge change? No.
In best case it will solve some random camera issues, and this is THE BEST CASE.
Of course I'll merge it when released, but don't expect anything huge.
JustArchi said:
Huge change? No.
In best case it will solve some random camera issues, and this is THE BEST CASE.
Of course I'll merge it when released, but don't expect anything huge.
Click to expand...
Click to collapse
Thank you! Wish it could improve something.
Well all they will do is upload a dump of the current kernel sources as they are in their repo, I don't expect anything else than a 3.0.y, pretty much the same we have now with maybe a few little changes, nothing huge anyway.
JP.
Will the new kernel only fix camera crash issues (talking exactly about the camera)?
3.4x kernel ?
---------- Post added at 03:35 PM ---------- Previous post was at 03:30 PM ----------
Android 4.0.4
Android 4.1.1
Android 4.1.2
Android 4.2.1
Android 4.2.2
Android 4.3
Android 4.3.1
Android 4.4.2 ?
http://gfxbench.com/device.jsp?benc...+GT-I9308,+SCH-I939,+SHV-E210)&testgroup=info
Yank555 said:
Well all they will do is upload a dump of the current kernel sources as they are in their repo, I don't expect anything else than a 3.0.y, pretty much the same we have now with maybe a few little changes, nothing huge anyway.
JP.
Click to expand...
Click to collapse
Hey, I only just got the SIII so I'm not familiar with the way Samsung work with source code: are you saying they have no public git? There isn't one I can find, so will the aforementioned new code be listed here as a zip instead as "Update 14"?
mikaillevist said:
3.4x kernel ?
---------- Post added at 03:35 PM ---------- Previous post was at 03:30 PM ----------
Android 4.0.4
Android 4.1.1
Android 4.1.2
Android 4.2.1
Android 4.2.2
Android 4.3
Android 4.3.1
Android 4.4.2 ?
http://gfxbench.com/device.jsp?benc...+GT-I9308,+SCH-I939,+SHV-E210)&testgroup=info
Click to expand...
Click to collapse
Hell no.... If they release a 3.4 kernel I will eat my SIII whole. Which would be a shame as I'd love to have a 3.4 kernel on my SIII.
mikaillevist said:
3.4x kernel ?
---------- Post added at 03:35 PM ---------- Previous post was at 03:30 PM ----------
Android 4.0.4
Android 4.1.1
Android 4.1.2
Android 4.2.1
Android 4.2.2
Android 4.3
Android 4.3.1
Android 4.4.2 ?
http://gfxbench.com/device.jsp?benc...+GT-I9308,+SCH-I939,+SHV-E210)&testgroup=info
Click to expand...
Click to collapse
we've already discussed this blackcat, it's AOSP, now go away
Choristav said:
we've already discussed this blackcat, it's AOSP, now go away
Click to expand...
Click to collapse
GFX Bench only official rom benchmark listed.
HTCDreamOn said:
Hey, I only just got the SIII so I'm not familiar with the way Samsung work with source code: are you saying they have no public git? There isn't one I can find, so will the aforementioned new code be listed here as a zip instead as "Update 14"?
Hell no.... If they release a 3.4 kernel I will eat my SIII whole. Which would be a shame as I'd love to have a 3.4 kernel on my SIII.
Click to expand...
Click to collapse
No major oem has a git, except Sony I think, and Google for the Nexus line. So yes, it'll be Update 14.
Don't expect a 3.4, that would be a huge workload, and what would be the point from their perspektive ? Don't have too high hopes, you will get dissappointed.
JP.
Sent from my OnePlus One running stock rooted CM11S.
Yank555 said:
No major oem has a git, except Sony I think, and Google for the Nexus line. So yes, it'll be Update 14.
Don't expect a 3.4, that would be a huge workload, and what would be the point from their perspektive ? Don't have too high hopes, you will get dissappointed.
JP.
Sent from my OnePlus One running stock rooted CM11S.
Click to expand...
Click to collapse
Thanks!
Samsung has just gave me an email said SOURCE PROVIDED
I can't see it now though.
breakshadow0504 said:
Thanks!
Samsung has just gave me an email said SOURCE PROVIDED
I can't see it now though.
Click to expand...
Click to collapse
look here
hwjrmrm said:
look here
Click to expand...
Click to collapse
Is that the latest pack?seems not...
Then it should be my fault…………Samsung Agent of FOSS ask me to give him ONLY ONE VERSION, but I gave him/her two....
asking for the right code now
Network worse than ever.This is duplicate reply.deleted.
Deleted.
Not the third……
Reading the title, I thought it could help with the kernel-related issues on the 4.4.2 ports...
minimaster4734 said:
Reading the title, I thought it could help with the kernel-related issues on the 4.4.2 ports...
Click to expand...
Click to collapse
There is no i9300 official 4.4.x, so the kernel will certainly not be updated towards that goal...
JP.
Sent from my Nexus 5 running stock rooted AOSP on Yank555.lu v1.0-alpha5 kernel.
[KERNEL][4.4.2/.4][*Stock Kernel -4.4.2 & 4.4.4(Arter's) Based TW ROMS*][i9300][16/1]
Stock Kernel For 4.4.2 and 4.4.4(Arter's ported) Touchwiz Based Roms For Our Samsung Galaxy SIII
Now No More Flashing The Whole Rom Again And Again To Get The Stock Kernel
Feature:-
All 4.4.2 and 4.4.4(Arter's ported) TouchWiz based ROM supported(Personally sure about QS based ROMS).
Supported Devices:-
Only Samsung Galaxy SIII GT-i9300(International Version).
1.Why did I port this kernel?
Ans. I wanted move from Boeffla kernel beta 6 to Archikernel V1.5.2 but i was unable to do so cause as we all know Archikernel uses "Anykernel" Method and I didn't want to flash the whole ROM again since I had debloated the ROM of my own by spending my precious time.
2.Does it support all 4.4.2 and 4.4.4 kernels?
Ans. Hope so. Yes it supports.
3.What to expect?
Ans.Best compatibility for all kernels(4.4.2 and 4.4.4).
4.What not to expect?
Ans.New versions. Because it is complete stock and quite bug free too and this is only for having stock kernel back so that you can flash other kernels without having any bug(except kernel bugs) and I dont have that much of time to work on it.
Warning:- I and other kernel developers are not at all responsible if anything wrong happens with you and your SIII.
Download Information:-
1.) Stock_Kernel_AP_4.4.2 is for 4.4.2 touchwiz based ROMs!
2.)Stock_Kernel_AP_4.4.4 is for Arter's ported 4.4.4 V5 based ROMs!
3.) Stock_Kernel_AP_4.4.4_V6 is for Arter's ported 4.4.4 V6 based ROMs!
Press Thanks button if my work is really helpful for you.
Enjoy
-AP
Upcoming:
A new thread to provide a comparison of different kernels
-AP
New Thread Added
Comparison Thread
http://forum.xda-developers.com/gal...rnels-siii-t2921170/post56338476#post56338476
Stock kernel for 4.4.4 arter based roms coming soon!
-AP
Thread Updated:
4.4.4(Arter's Ported) kernel added!
thank you so much!!!!!
Sent from my GT-I9300 using XDA Free mobile app
cangcan said:
thank you so much!!!!!
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Welcome
Will this work on AOSP based roms too?
[email protected] said:
Will this work on AOSP based roms too?
Click to expand...
Click to collapse
I think no. Because this one is only for ported 4.4.2 and 4.4.4 roms not for aosp roms
[email protected] said:
Will this work on AOSP based roms too?
Click to expand...
Click to collapse
No mate!
As I have mentioned that this is only for PORTED 4.4.2 and 4.4.4 ROMS
Kernel
Bravo nice job thanks
perseolorenzo said:
Bravo nice job thanks
Click to expand...
Click to collapse
Thanks mate!
And all the best for your awesome project
Waiting for V5
any bug ?
ara1370 said:
any bug ?
Click to expand...
Click to collapse
No.
FireBlazeGT said:
No.
Click to expand...
Click to collapse
When Phone is powered off and you plugin charger it will always boot
ara1370 said:
When Phone is powered off and you plugin charger it will always boot
Click to expand...
Click to collapse
Mate! This is only stock kernel ! Am not the developer of the kernel!
And its fixed in Arter's kernel v4.0 beta 2!
Thread Updated:-
Arter's 4.4.4 V6 kernel added!
Thank You!
AP
FireBlazeGT said:
Thread Updated:-
Arter's 4.4.4 V6 kernel added!
Thank You!
AP
Click to expand...
Click to collapse
Thanx :good:
---------- Post added at 07:16 PM ---------- Previous post was at 06:48 PM ----------
FireBlazeGT said:
Thread Updated:-
Arter's 4.4.4 V6 kernel added!
Thank You!
AP
Click to expand...
Click to collapse
I want to ask which is better to work with Arter's ported 4.4.4 V6 based ROM .
Stock_Kernel_AP_4.4.4_V6
Or
arter97-kernel-4.0-beta6
????????
melad wx said:
Thanx :good:
---------- Post added at 07:16 PM ---------- Previous post was at 06:48 PM ----------
I want to ask which is better to work with Arter's ported 4.4.4 V6 based ROM .
Stock_Kernel_AP_4.4.4_V6
Or
arter97-kernel-4.0-beta6
????????
Click to expand...
Click to collapse
I am using Blekota Note 4 V3 ROM
And
From my personal experience
Stock kernel is better in terms of battery life and also good in performance..
Arter's 4.0 beta6 is also not bad... but lil less battery backup than stock kernel...
Go for Boeffla kernel v7.3! Best one!
Hi people,
With the recent announcement of @pedestre (creator of apolo kernel) that the development of apolo kernel comes to an end and Gustavo kernel does not be updated since a long time, we have no costum kernel for the many 5.1.1 roms that are coming to our phones....
Many people uses bln, cpu and gpu voltages control etc.
I want to ask someone with skils who can compile latest cm kernel, witch i think that will be compatible with all newest 5.1.1 roms, with basiclly feautures like bln and others... and if its possible, keep it update with lates cm realises....
Thanks, i hope some dev can help us
Yes, we need kernel developers
Maybe @Resync , @stelistcristi , @chhapil or @warrior1208 ?
Here is tutorial: How to build Gustavo kernel http://forum.xda-developers.com/showthread.php?p=54997129
Zile995 said:
Yes, we need kernel developers
Maybe @Resync , @stelistcristi , @chhapil or @warrior1208 ?
Here is tutorial: How to build Gustavo kernel http://forum.xda-developers.com/showthread.php?p=54997129
Click to expand...
Click to collapse
Always been considering to build a kernel, especially porting dorimanx to lollipop. Having trouble on ubuntu with dorimanx's instructions, so I will try bbqlinux instead and see how it goes.
Zile995 said:
Yes, we need kernel developers
Maybe @Resync , @stelistcristi , @chhapil or @warrior1208 ?
Here is tutorial: How to build Gustavo kernel http://forum.xda-developers.com/showthread.php?p=54997129
Click to expand...
Click to collapse
I can develop if @pedestre can give me the permissions to let me continue Apolo. Although, I'll do that and all the other ROMs' building stuff after 6th of June.
warrior1208 said:
I can develop if @pedestre can give me the permissions to let me continue Apolo. Although, I'll do that and all the other ROMs' building stuff after 6th of June.
Click to expand...
Click to collapse
I'm sure he would give you persmission to do that.
Right now I'm cloning my repo of dorimanx kernel. Have made a few changes like chhapil (except no uber tc yet). I'll see if I can release something next week (however will be very busy with exams). I'm still very new at building kernels so expect a few quirks with the kernel.
---------- Post added at 07:12 AM ---------- Previous post was at 07:10 AM ----------
Nightshadow931 said:
I'm sure he would give you persmission to do that.
Click to expand...
Click to collapse
Should be alright since android kernel is open source.
This thread is already awsome!
Yes please LL Kernel! CM sourced RR for galaxy s2 gt i9100 needs kernel!
Developers please come forward we beg you!
@warrior1208 Instead of continuing a Kernel, why not make and develop one yourself and name the kernel yourself as well? It would be nice if there's a new kernel name in our device. Just suggesting here...
:good:
souler456 said:
@warrior1208 Instead of continuing a Kernel, why not make and develop one yourself and name the kernel yourself as well? It would be nice if there's a new kernel name in our device. Just suggesting here...
:good:
Click to expand...
Click to collapse
Let's see. I'll try. But first, I have to update all the three ROMs and then a custom kernel. Although, as I stated, I'll be able to do that after 6th of June.
Regards.
warrior1208 said:
Let's see. I'll try. But first, I have to update all the three ROMs and then a custom kernel. Although, as I stated, I'll be able to do that after 6th of June.
Regards.
Click to expand...
Click to collapse
Sure, man. Take your sweet time, and thanks for the response :good:
:good:
I vote for gustavo's kernel since last version of it was just everything i needed. Miss it's colour control very much
I would love to see a TWRP kernel, as I use the file manager to delete unwanted system files on rom updates.
I do think it has a more friendly UI too.
We need 2 type of kernel. One like gustavo_s' and other is like apolo.
One for full control
And other is daily usage and more stable
Or maybe one based on apolo with CPU and GPU OC
OskarUA said:
I vote for gustavo's kernel since last version of it was just everything i needed. Miss it's colour control very much
Click to expand...
Click to collapse
I'm pretty sure there not much work needed to get Gustavo's kernel working on newer lollipop builds. Right now, I've made changes to io schedulers, TCP algorithm, supersu. Still have no clue how to get build started, at least there's progress. Change of mind. Will be busy with exams.
Zile995 said:
Or maybe one based on apolo with CPU and GPU OC
Click to expand...
Click to collapse
Then apolo configurator must be updated too
Latest twrp CM based kernel is available in my threads...second post.
http://forum.xda-developers.com/showthread.php?p=61055230
Where is your thread? Link please.
JudgeDread11 said:
http://forum.xda-developers.com/showthread.php?p=61055230
Where is your thread? Link please.
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...dirtyunicorns-v9-3-unofficial-builds-t3111998
nhmanas said:
Then apolo configurator must be updated too
Click to expand...
Click to collapse
Actually no, everything can be done through terminal. That is, indeex, how apolo configurator/stweaks or any other such app works. Just executing commands.
Do anyone Having shinto kernel links?
Official's one not working anymore.!!
Need shinto kernel nessa for darklord rom 5.1.1.
Thanks.
Mr.Salman said:
Do anyone Having shinto kernel links?
Official's one not working anymore.!!
Need shinto kernel nessa for darklord rom 5.1.1.
Thanks.
Click to expand...
Click to collapse
My understanding that as this kernel in none GPL compliant links or posts are not allowed on XDA .
Pm me if you're having links