Hey!
Today when I were writing on whatsapp my n9005 display began to svanish and becomes green and white, i can boot it into odin download mode and even into recovery, when i boot it i can see that it booted and it loads, so i think the motherboard should be ok, is the display broken or something else? Can i simply buy a new one with frame and substitute it?
n9005 - rooted - no warranty ( cause the guy who sold it did ran the knoxxxx )
Thanks
Related
Hello everyone!
My brother sent me is MX 030. It is the original Meizu MX HK version with the unlocked bootloader. Two weeks ago, he found his phone had crashed. The screen was black and he powering it off and then back on would not do anything (black screen - only vibrates on power on).
I got it today and first thing I did (after charging it-the charging mode works and displays a battery logo) was boot into recovery mode (or update mode on Meizu phones) and I was able to reach the menu. It let me mount the drive onto my PC. I downloaded the latest firmware and put it on the drive. I pressed upgrade and cleared data. The software seemed to install fine, but then the phone rebooted to a black screen - again.
Then I tried installing older versions which I found on the meizu website. They all install and I can see the recovery mode is different, but they all boot into black unresponsive mode (which drains the battery).
Having had other android devices before, I feel the phone is stuck in reboot loop.. I don't know what else to try or attempt. I feel am running out of options. The fact that the phone still responds to some commands and allows me to flash firmware should indicate that the phone isn't brain dead quite yet, right? Anyone else experienced a similar situation?
Thank you,
Oli
Hey there everyone, and thank you all in advance for any help i might receive with my issue. I have a S4 gt-i9500, i havent played around with rooting or installing any custom firmwares so as not to void my warranty, but today, out of the blue my phone just turned off and started an incessant bootloop. I cant even get it to stay off, when i try to access recovery mode i get this little pic that goes by so fast i cant really see it, but it looks like the android dummy lying down dead , with a red exclamation mark on top of it. I can access the first stage of download mode, but when i press Vol up, nothing happens and after a few secs the bootloop starts again(even if i dont press anything). I took my phone to my provider and they told me my warranty was violated because of some bs key scratches on the chrome bezel, id really appreciate any info on how to make it stay in download mode long enough to flash a rom or custom recovery on it to see if i can get it fixed.
Hello Guys,
Screen in my i9505 stopped working,. It looked as it was some lcd problem so I ordered new screen and...it did not help so I would like to try warranty option but I cannot do anything since my screen is off. The phone probably is working. It is visible in Odin and allows flashing firmware. Booting sound is ok and it looks like only the screen is damaged but it is not issue since another screen also not worked.
The question is how to blindly restore some stock firwmare and reset flashing counter without screen? Will hdmi cable help when I buy it?
Triangle away I think works only from phone itself it is not doable via Odin somehow?
Thank you!
I messed up with my LG G2 D802 and i need help because i believe it's a software problem.
When i was installing the latest cm12.1 nightly, after trying a few other roms, i also installed, by mistake, an old jb bootloader/bootstack.
As result the phone entered in Bootloop, but not a normal bootloop, on the screen start appearing some crazy interferences and then the phone boot up, but the screen not. The phone made sounds and the touchscreen work, but the screen was black/off.
I've managed to solve the problem with an unbrick method, but now i have a huge problem: the screen, on the rigth side, from the top to the botton has 6/7 black lines. I have no idea how to solve this and if is a hardware problem ... I've read it's an kernel problem, not hardware, but don't know how to solve the problem :/
Picture:
https://meocloud.pt/link/58d13900-ffa8-4114-8957-8c4b973bad1a/IMG_20150916_020454.jpg/
I feel your pain
Hi mate
Same thing happened to me.
Background info: I had successfully upgraded to CM12.1 , was running fine for a few days then I wanted to update my TWRP, updated the recovery and just went to check that I had OTG cable support then boom, boot loop.
It didnt just loop it just loaded loaded loaded, then the screen made some funny sounds. and then shut down. I hard reset to recovery and reinstalled CM12.1 and was able to successfully exit the loop. but damage to screen had occurred in the exact same place, and method right side of the screen.
Tried rinstalling original jellybean software from my backup. no success, and also flashing other versions of CM12.1 nothing.
After some research I saw that this is a manufacturing fault and that this occured quite often. it appears that the best solution is to buy a new screen as it is the actual hardware that is damaged in the screen digitizer. I might be wrong, and I pray that I am because I want to fix it too. in the end I just bought a new note 4 (not note 5 as i wanted SDcard storage). Phone was 2 years old and a new screen costs a fortune. But i miss my little G2 and its super fast speed and simpleness. :crying::crying:
If someone else has the solution to this problem on the forum we are all ears.
Hi,so i replaced LCD in my I9515, I've been doing this with youtube tutorial. Before 1-2 weeks ago my phone boot normally but i couldnt see anything due to broken LCD. In store, guy took my battery and connected it to a naked motherboard and lcd to see if it's working. After replacment when i try to boot it's stuck on Samsung Galaxy S4 logo and wont boot further. I can go into download mode, computer and odin are seeing connected phone, but i cannot boot into recovery it's just showing blue "booting recovery" and nothing happening. When I charging it, the grey battery pops out, but when i unplug it the battery is still there like it's still connected. Sometimes when i try to turn it off when it's stuck on galaxy s4 logo it's turning off then on by itself like 2 or 3 times. Any ideas how to fix it? It's hardware or software problem? In a minutes i'll try to flash stock soft from sammobile. Phone was never rooted and no custom roms were installed.
Thanks for all help.
EDIT Flashing with ODIN not solved the problem
EDIT Now phone doesnt show battery when connected just one vibrate and screen is blank, and when i try to boot it while connected it's just vibrating and still black screen. When it was connected to pc it was vibrating every 2 seconds. When I try to boot it's by itself trying to boot recovery but it's not booting and blue "recovery booting" just hang on top of screen and nothing happening.
EDIT After restarting it from download mode it's get back to the problem i had in the beggining
EDIT Just flashed 4-files soft with PIT and nothing changed
I think the screen may not have been replaced properly.
And motherboard is broken now ? I think i did everything right.
There might be a short circuit somewhere. I can't tell you exactly.
So the best option now it's tech look at it?
Saintseu said:
So the best option now it's tech look at it?
Click to expand...
Click to collapse
Yes. Unless you have some tech-savvy friends who could also look at it.