Q&A for [SM-N900*] CF-Auto-Root
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
root for telstra au note 3
Can anyone tell me how to root a galaxy note 3 on telstra Australia? Or which chainfire version will work? Cheers
sm 900 null imei
hello guys,
i have sm-n900 galaxy note 3, my problem is that i rooted the phone before 4-5 months, at that time it wasnt successful so i flashed stock firmware ( N900xxudna6_n900odddna3_inu ) it was all working well for 4 months, now last night , i wanted to root it again, so i tried by flashing ( cf-auto-root-ha3g-ha3gxx-smn900.tar.md5 ) but it got stuck on screen "firmware upgrade encountered and issue, plz select recovery in kies and try again". so i again flashed back ( N900xxudna6_n900odddna3_inu ) and my phone started up, but no i dont have any signal, it says null imei and unknown baseband, i donno what i m supposed to do, i dont know what efs is or anything, its so complicated and confusing, sm 1 plz help me in simple ways.
P.S : i know there are lots of threads regarding this, but i have very little knowledge about rooting and stuff so i cant understand those technical words, so plz help me,
nikunj.parsana said:
hello guys,
i have sm-n900 galaxy note 3, my problem is that i rooted the phone before 4-5 months, at that time it wasnt successful so i flashed stock firmware ( N900xxudna6_n900odddna3_inu ) it was all working well for 4 months, now last night , i wanted to root it again, so i tried by flashing ( cf-auto-root-ha3g-ha3gxx-smn900.tar.md5 ) but it got stuck on screen "firmware upgrade encountered and issue, plz select recovery in kies and try again". so i again flashed back ( N900xxudna6_n900odddna3_inu ) and my phone started up, but no i dont have any signal, it says null imei and unknown baseband, i donno what i m supposed to do, i dont know what efs is or anything, its so complicated and confusing, sm 1 plz help me in simple ways.
P.S : i know there are lots of threads regarding this, but i have very little knowledge about rooting and stuff so i cant understand those technical words, so plz help me,
Click to expand...
Click to collapse
you need to flash only the modem you had before to get back your imei
rayman95 said:
you need to flash only the modem you had before to get back your imei
Click to expand...
Click to collapse
frankly speaking, i dont even know how to flash modem, i have 0 knowledge about rooting and everything, i was looking for cheats for a game, and all the threads on internet said , i need to root for the cheat to work, so i searched for rooting method, and did what i said earlier, i have 0 knowledge mate, plz i wud be indebt if u could explain step by step, i m damn worried, and it took lot of time to collect money for this phone, and i think ill be damned if this is a goner :/
I just want to confirm that the cf auto root for the SM-N900S korean file has worked on my SM-N900L korean phone!
Thanks
Galaxy Note 3 first time rooter
Hi everyone, newcomer here. Thanks for providing this community to help people out and thanks to Chainfire for making CF-Auto-Root.
I have a Galaxy Note 3, and I've never rooted before because I really like Touchwiz and the useful features it provides. I've read the main post for CF-Auto-Root, so I understand this is supposed to be the easiest root method that's supposed to retain stock Touchwiz and nothing more.
Before I take the plunge, I just wanted to clarify my understanding to make sure I really do want to go ahead with rooting my Note.
1. When you say CF auto root is rooting my phone, does that mean it's just achieving a "state of being" with the phone, and not really installing or modifying anything else with Touchwiz (besides SuperSU)? As in, everything is the same as before, Touchwiz is the same as before, and the only thing different is that I've gained permission to access more things in the software?
2. My understanding is that I shouldn't lose any data, apps, home screen app layouts, etc?
3. Will I lose any functionality in Touchwiz? Like S-Pen features, Samsung apps, etc?
4. If I receive an update to 4.4.4 or 5.0, will I lose this cf-auto-root state?
Thanks everyone for helping out!
xoSamsungGalxo said:
1. When you say CF auto root is rooting my phone, does that mean it's just achieving a "state of being" with the phone, and not really installing or modifying anything else with Touchwiz (besides SuperSU)? As in, everything is the same as before, Touchwiz is the same as before, and the only thing different is that I've gained permission to access more things in the software?
Click to expand...
Click to collapse
CF-Auto-Root flashes custom recovery, which installs the su binary and SuperSU application and then sets back the default stock recovery. Everything else remains unchanged, including TouchWiz.
xoSamsungGalxo said:
2. My understanding is that I shouldn't lose any data, apps, home screen app layouts, etc?
Click to expand...
Click to collapse
Correct.
xoSamsungGalxo said:
3. Will I lose any functionality in Touchwiz? Like S-Pen features, Samsung apps, etc?
Click to expand...
Click to collapse
You lose KNOX and all features related to it.
xoSamsungGalxo said:
4. If I receive an update to 4.4.4 or 5.0, will I lose this cf-auto-root state?
Click to expand...
Click to collapse
Most likely, though there is a chance, that su binary will not be removed, in that case you keep the root.
Hi, I have a Note 3 model number SM-N9005 which is factory unlocked with no carrier on 4.4.2 in the UK.
I'm trying to root using the CF auto root thread instructions here
http://forum.xda-developers.com/showthread.php?t=2466423
I am unsure what file to download and was wondering if this one would work with my phone?
It is the second download option listed in the third post of the CF auto root thread.
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
Thanks for any help.
S1eB said:
Hi, I have a Note 3 model number SM-N9005 which is factory unlocked with no carrier on 4.4.2 in the UK.
I'm trying to root using the CF auto root thread instructions here
http://forum.xda-developers.com/showthread.php?t=2466423
I am unsure what file to download and was wondering if this one would work with my phone?
It is the second download option listed in the third post of the CF auto root thread.
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
Thanks for any help.
Click to expand...
Click to collapse
Yes it is. That download is for Note 3 with Device Type = hlte and Product Name = hltexx.
Just to make sure, as the download is based on Device Type and Product Name, check these info for your device with this app: Phone INFO ★Samsung★ (in GENERAL INFO section).
.
---------- Post added at 09:09 AM ---------- Previous post was at 09:05 AM ----------
mcarchbold said:
Can anyone tell me how to root a galaxy note 3 on telstra Australia? Or which chainfire version will work? Cheers
Click to expand...
Click to collapse
Check your Model Name, Device Type and Product Name using Phone INFO ★Samsung★ app.
Then find the download here: http://autoroot.chainfire.eu/
vndnguyen said:
Yes it is. That download is for Note 3 with Device Type = hlte and Product Name = hltexx.
Just to make sure, as the download is based on Device Type and Product Name, check these info for your device with this app: Phone INFO ★Samsung★ (in GENERAL INFO section).
Click to expand...
Click to collapse
Thanks for the reply, I checked with the app you linked and my phone is hlte and hltexx so it looks like that is the right file I need
Noob question
*edit* I didn't see the older question asking the same thing sorry you can ignore this
Hello everyone I am new to rooting phones and I was looking into CF-Auto Root since it is said to be beginner friendly. I was wondering if using this method would wipe my phone of everything I had on it or would it just give me root access while leaving everything else on the phone the same.
Someguyfromhell said:
CF-Auto-Root flashes custom recovery, which installs the su binary and SuperSU application and then sets back the default stock recovery. Everything else remains unchanged, including TouchWiz.
Click to expand...
Click to collapse
I know XDA is a reputable site, so I don't have to worry as much, but I know that theoretically speaking, downloading things outside of the official Android app store poses a risk for being malware or spyware.
So I'm only asking this in the spirit of just practicing utmost caution, how would I know that the CF-Auto-Root file, which can be found through the link below, is genuine and untampered with?
http://forum.xda-developers.com/showpost.php?p=46098951&postcount=3
Thanks.
@sd_shadow
Odin hung up and closed on me, Now firmware is corrupt so I am having to do an emergency recovery any idea why that happened? Never had an issue with Odin before.
Sent from my SM-N900T using XDA Free mobile app
Can I run the exe with wine?
Can I run the exe with wine? I only have a linux machine around and I'd rather not download an img to make a VM
Samsung SM-900A 4.4.2 Still Unrootable?
Just checking. The last post I can find says that this model/version is un-rootable. Just looking for a confirmation.
Thanks!
n9005xxuenb1 What root package should i pick?
My CPU is a Snapdragon, but the suggested rom for the EU version is the package for the Qualcomm CPU.
Thank you.
SM-N900V
On your website with all the downloads for the CF-auto-root there is not an option for SM-N900V (Verizon) phones. Is this one that has not been tested yet?
good
Ask..
why i cant download from this site?
Related
I have become increasingly frustrated with this device! I am trying to run the *#1234# code in the stock dialer to view my AP and CSC so that I may root via the Root de la Vega method. But when the code runs it just comes back saying "Unable to Process Request". I've tried everything such as dialing just #1234#, *#1234#*, resets, factory resets, posting the question here previously (as I cannot post in the actual forum thread yet due to posting limitations) but it was deleted with no message to let me know why, nothing works. I cannot root safely without being able to view this code and was wondering if anyone else was having the same problem? Not sure if it's relevant but my carrier is T-mobile and I am using the 32gb White model. Everything is still stock. I really need help with this, I'm ready to go back to my note 2 because at least that had root -_-. Someone please help!?
MidniteKitten said:
I have become increasingly frustrated with this device! I am trying to run the *#1234# code in the stock dialer to view my AP and CSC so that I may root via the Root de la Vega method. But when the code runs it just comes back saying "Unable to Process Request". I've tried everything such as dialing just #1234#, *#1234#*, resets, factory resets, posting the question here previously (as I cannot post in the actual forum thread yet due to posting limitations) but it was deleted with no message to let me know why, nothing works. I cannot root safely without being able to view this code and was wondering if anyone else was having the same problem? Not sure if it's relevant but my carrier is T-mobile and I am using the 32gb White model. Everything is still stock. I really need help with this, I'm ready to go back to my note 2 because at least that had root -_-. Someone please help!?
Click to expand...
Click to collapse
As a workaround, perhaps log in to Kies solely for the purpose of checking what your current firmware is? See snapshot here http://i1-win.softpedia-static.com/screenshots/Kies_1.png?1378883026.
MidniteKitten said:
I have become increasingly frustrated with this device! I am trying to run the *#1234# code in the stock dialer to view my AP and CSC so that I may root via the Root de la Vega method. But when the code runs it just comes back saying "Unable to Process Request". I've tried everything such as dialing just #1234#, *#1234#*, resets, factory resets, posting the question here previously (as I cannot post in the actual forum thread yet due to posting limitations) but it was deleted with no message to let me know why, nothing works. I cannot root safely without being able to view this code and was wondering if anyone else was having the same problem? Not sure if it's relevant but my carrier is T-mobile and I am using the 32gb White model. Everything is still stock. I really need help with this, I'm ready to go back to my note 2 because at least that had root -_-. Someone please help!?
Click to expand...
Click to collapse
You have to be rooted and "enable" the entry of service codes via the dialer first.
For the VZW Note 3, I've confirmed this works - Edit the contents of /efs/carrier/HiddenMenu from OFF to ON (must be capitalized)...reboot and you're good to go.
If that doesn't work for non VZW Note 3's, you can try the full steps listed here!
edwmsjr said:
You have to be rooted and "enable" the entry of service codes via the dialer first.
For the VZW Note 3, I've confirmed this works - Edit the contents of /efs/carrier/HiddenMenu from OFF to ON (must be capitalized)...reboot and you're good to go.
If that doesn't work for non VZW Note 3's, you can try the full steps listed here!
Click to expand...
Click to collapse
This is very confusing , if I'm trying to obtain root I need to already be rooted? If I root without using the Vega method I'll trip the knox counter no? I'm trying to avoid that. Seems like a catch 22 to me?
edwmsjr said:
You have to be rooted and "enable" the entry of service codes via the dialer first.
For the VZW Note 3, I've confirmed this works - Edit the contents of /efs/carrier/HiddenMenu from OFF to ON (must be capitalized)...reboot and you're good to go.
If that doesn't work for non VZW Note 3's, you can try the full steps listed here!
Click to expand...
Click to collapse
dxzh said:
As a workaround, perhaps log in to Kies solely for the purpose of checking what your current firmware is? See snapshot here http://i1-win.softpedia-static.com/screenshots/Kies_1.png?1378883026.
Click to expand...
Click to collapse
This helped me out immensely! Thank you so much. Now rooted and no knox counter trip Thank you!
MidniteKitten said:
This helped me out immensely! Thank you so much. Now rooted and no knox counter trip Thank you!
Click to expand...
Click to collapse
Please enlighten us about your AP and CSC versions then
hallydamaster said:
Please enlighten us about your AP and CSC versions then
Click to expand...
Click to collapse
They ended up being:
N900TUVUBM17 & M17 respectively. Seriously, thank you for ending the frustration, this phone has gotten much better now, for a second there I thought I was going to have to deal with buyers remorse.
MidniteKitten said:
They ended up being:
N900TUVUBM17 & M17 respectively. Seriously, thank you for ending the frustration, this phone has gotten much better now, for a second there I thought I was going to have to deal with buyers remorse.
Click to expand...
Click to collapse
Those are the same codes I have. Which AP and CSC files did you use with ODIN?
keverline said:
Those are the same codes I have. Which AP and CSC files did you use with ODIN?
Click to expand...
Click to collapse
I used the files that are located on the 1st post here:
http://forum.xda-developers.com/showthread.php?p=46480545
MidniteKitten said:
I have become increasingly frustrated with this device! I am trying to run the *#1234# code in the stock dialer to view my AP and CSC so that I may root via the Root de la Vega method. But when the code runs it just comes back saying "Unable to Process Request". I've tried everything such as dialing just #1234#, *#1234#*, resets, factory resets, posting the question here previously (as I cannot post in the actual forum thread yet due to posting limitations) but it was deleted with no message to let me know why, nothing works. I cannot root safely without being able to view this code and was wondering if anyone else was having the same problem? Not sure if it's relevant but my carrier is T-mobile and I am using the 32gb White model. Everything is still stock. I really need help with this, I'm ready to go back to my note 2 because at least that had root -_-. Someone please help!?
Click to expand...
Click to collapse
Good to know your problem is shorted out, I just read this thread,next time if u have this type of problem u can install a app called checkfus from google play.
Trying to Root Verizon Note 3
jdomadia said:
Good to know your problem is shorted out, I just read this thread,next time if u have this type of problem u can install a app called checkfus from google play.
Click to expand...
Click to collapse
Having the same problem, but THANK you for the Checkfus recommendation. That does provide the CSC.
It doesn't show AP though.
However, (new road block) my CSC is N900VVZWMI9 , I don't see that in the list https://mega.co.nz/#F!n9JnyI5S!VKmm1hxHlhIxWo1bXeIfLA
So I guess we will have to wait... Correct?
I am having a similar problem, I just opened my Note 3 and when I dial *#1234# nothing happens, if I click send, it actually tries to dial it. I need to know the AP and CSC so I can root. Obviously I can't follow the steps above since I'm not rooted yet.
Remember.. You have to use native dialer when entering codes.. I was using a third party dialer app and it only dialed.
Sent from my SM-N900V using Tapatalk
Do the 1234 and the press and hold the home button, version shd be in multitask menu
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
On T-Mobile Galaxy Note 3, dial *#12580*369# instead of *#1234#.
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
native dialor
i had the same problem realised i was using a custom dial pad use the native dialer when u go in all apps and hit phone then when you dial the codes they work
Thank You!
Killberty said:
On T-Mobile Galaxy Note 3, dial *#12580*369# instead of *#1234#.
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Thanks it worked! I've been looking for this. Nobody else seems to know that *#1234# will only work on rooted device.
Yes this worked. :good:
Dear All,
I have SM-N9005(Note 3) purchased in UAE. As Android Kitkat(4.4.2) is not officially released, I downloaded and updated Note-3 with Poland Offical Firmware from www.sammobile.com.
Now I want to root my Note 3 without disturbing the knox. I gone through the forum http://forum.xda-developers.com/showthread.php?t=2487916
the root access procedure mention is quite old(4.3), I am not sure whether same procedure will work for 4.4.2 also. Can somebody please confirm it. Below are my phone details
Model : SM-N9005
AP : N9005XXUENB3
CP : N9005XXUENB1
CSC : N90050XXENB1
Please let me know if you need any further details.
Thanks,
miraskariali said:
Dear All,
I have SM-N9005(Note 3) purchased in UAE. As Android Kitkat(4.4.2) is not officially released, I downloaded and updated Note-3 with Poland Offical Firmware from www.sammobile.com.
Now I want to root my Note 3 without disturbing the knox. I gone through the forum http://forum.xda-developers.com/showthread.php?t=2487916
the root access procedure mention is quite old(4.3), I am not sure whether same procedure will work for 4.4.2 also. Can somebody please confirm it. Below are my phone details
Model : SM-N9005
AP : N9005XXUENB3
CP : N9005XXUENB1
CSC : N90050XXENB1
Please let me know if you need any further details.
Thanks,
Click to expand...
Click to collapse
You can't root kk with out tripping Knox far as I know
You went through one thread ? Well ain't that cute... There are millions of them. Why not do some more reading ?
Sent from my N9005
Dejan Sathanas said:
You went through one thread ? Well ain't that cute... There are millions of them. Why not do some more reading ?
Sent from my N9005
Click to expand...
Click to collapse
the post just 1 only, man..
I believe, he doesn't know the functions available on xda yet.
he he he.
Jeez ... not the most friendly responses to this guys question ...
I don't have the answer for you TS as I just picked up a Note 3 too and am trying to get up to speed ... but if I did know ... I would try to help you, or at least point you to a specific link for help.
Haints said:
Jeez ... not the most friendly responses to this guys question ...
I don't have the answer for you TS as I just picked up a Note 3 too and am trying to get up to speed ... but if I did know ... I would try to help you, or at least point you to a specific link for help.
Click to expand...
Click to collapse
I think its because the OP hasn't searched the forum for his answer (which it more than likely here somewhere) laziness isn't looked upon lightly here or anywhere on xda lol
speedyjay said:
I think its because the OP hasn't searched the forum for his answer (which it more than likely here somewhere) laziness isn't looked upon lightly here or anywhere on xda lol
Click to expand...
Click to collapse
You want to know what's funny? If you search on here for "rooting Note 3" ...
http://forum.xda-developers.com/search.php?searchid=315874282
... this is the very first thread that comes up.
Most of the other hits you get aren't all that helpful either, except maybe the "Root with Root De La Vega" thread, but that's a little advanced for someone who's never rooted the Note 3 before. I rooted my original Note, and it seems a little advanced to me ...
Knox is new to me too ... Do I really have to worry about tripping it?
Hello,
I have a note 3 and wish to root it.
I have seen this http://galaxy-note-3.wonderhowto.co...-note-3-one-easy-click-using-windows-0151863/ and not sure if it 100% genuine.
I also believe I have to backup the phone/iemi using kies is this correct?
Hoping someone could kindle assist me please.
Cheers
Android Noobie said:
Hello,
I have a note 3 and wish to root it.
I have seen this http://galaxy-note-3.wonderhowto.co...-note-3-one-easy-click-using-windows-0151863/ and not sure if it 100% genuine.
I also believe I have to backup the phone/iemi using kies is this correct?
Hoping someone could kindle assist me please.
Cheers
Click to expand...
Click to collapse
Kingo.app isn't endorsed on XDA due to IMEI numbers, theoretically, being copied to chinese servers...
It's easier to just use cf-autoroot and flash this in PC ODIN. Just make sure which Note 3 you have. I can say I have a note 3 and have 1 of 20 - 30 different models. Rooting is dependant on which model you have...
If you have the international 4G n9005 then using cf-autoroot in PC ODIN is best/easiest, you also need to know what version of Android you're running...
ultramag69 said:
Kingo.app isn't endorsed on XDA due to IMEI numbers, theoretically, being copied to chinese servers...
It's easier to just use cf-autoroot and flash this in PC ODIN. Just make sure which Note 3 you have. I can say I have a note 3 and have 1 of 20 - 30 different models. Rooting is dependant on which model you have...
If you have the international 4G n9005 then using cf-autoroot in PC ODIN is best/easiest, you also need to know what version of Android you're running...
Click to expand...
Click to collapse
Thanks mate.
The note 3 I have is SM-N9005.
Android version is 4.3.
Can you kindly guide me to instructions for cf-autoroot and also how I make a backup of the phone including iemi incase something goes wrong.?
Is this http://forum.xda-developers.com/galaxy-s3/development/tool-samsung-tool-1-0-t2602325 ok to use to backup phone?
If so do I root first then use it or do it before root?
Should i update to 4.4.2 before or after root?
Cheers
sub guys am having a problem with my g900f when am trying to root it using towel root it gives me "this phone isnt currently supported" tried entering the three different codes when i press on "towel root" but even no success any idea how to root successfully without tripin knox thanks
reco1 said:
sub guys am having a problem with my g900f when am trying to root it using towel root it gives me "this phone isnt currently supported" tried entering the three different codes when i press on "towel root" but even no success any idea how to root successfully without tripin knox thanks
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/galaxy-s5/general/how-to-root-triggering-knox-2nd-method-t2843044 if you have ANGx firmware. On NE2 it should work.
Fail Root S5 G900H
I have the model S5 company Personal Arentina. version of Band is G900HXUU1ANE2 .. but I have a problem with the Root .. 4 times and did not come out .. it hangs halfway through the process after about 10 min strip bricke mistake and the phone (Firmware error update) that is unusable .. only manages reinstalling the official rom, probe, CF root, towelroot, unlockroot and useless .. can not rootearlo in any way, is the first time it happens, S2, S3, S4. . never happened .. it is a process that takes no more than 5 minutes and leaves no way. appreciate your help thanks.
PS: what if the new firmware command above the staff? words that came out in the Free agosto..la really bothers me enough not access Root .. since I have full root access applications like Titanium Backup and other .. Regards.
:crying::crying:
The 900H isn't supported by towel root unfortunately.
russ18uk said:
The 900H isn't supported by towel root unfortunately.
Click to expand...
Click to collapse
Yep, in South America only 4G (900M) Version is supported.
reco1 said:
my g900f when am trying to root it using towel root it gives me "this phone isnt currently supported"
Click to expand...
Click to collapse
You neglected to give us much information, crucial details that would allow us to confirm or narrow down much.
At a guess you have a firmware build dating after June 3rd which closed the exploit vulnerability that allows Towel root to work. There are numerous threads about this, which means that you probably didn't do a forum search or read many threads about Towel root. That is a bad habit and it would be in your best interests to do a search before posting.
In any event, if your firmware postdates June 3rd, then use Odin to write a pre June 3rd build of 900F 4.4.2 firmware to your phone. Then Towel root should prevail.
.
Okay, I have a Samsung Galaxy Prime with Metro PCS. I was just texting the other day and then my phone reset and I got a black screen saying Blocked by Binary FTP. So yes i made the mistake of bricking my phone and flashing the T-Mobiles SM-G530T firmware. I've looked everywhere for the Stock Rom but can't find it and not sure if there are any Customer Roms for this device. Can someone get me going in the right direction or am i best with just sendng it back to Samsung and letting them flash it?
same boat
http://forum.xda-developers.com/grand-prime/help/sm-g530t1-stock-firmware-kernel-t3236774
I have the fix 4 Galaxy Grand Prime SM-G530T1
I have the firmware 4 MPCS Galaxy Grand Prime SM-G530T1
give me Plissss I need them
HOW
Can I get link too please
I need that firmware also please send me the link as well
Here's the link with Galaxy Grand Prime SM-G530T/ T1 Stock rom flashed via Odin.
http://forum.xda-developers.com/galaxy-core/development/odin-5-1-1-sm-g530t1-oh9-metropcs-t3280445
I know it says "Core Prime" but I assure you its the Grand Prime SM-G530T Stock. it's just a little typo.
It is the T-Mobile version but compatible with MetroPCS 100%. Metro PCS is under T-Mobile in the first place, pretty much the same thing except for the Start-Up & the apps. But it works! & the developer(s) that made the package did an amazing job!
If anyone needs further info feel free to contact me! I would be happy to assist in any way possible.
Kimble_89 said:
Here's the link with Galaxy Grand Prime SM-G530T/ T1 Stock rom flashed via Odin.
http://forum.xda-developers.com/galaxy-core/development/odin-5-1-1-sm-g530t1-oh9-metropcs-t3280445
I know it says "Core Prime" but I assure you its the Grand Prime SM-G530T Stock. it's just a little typo.
It is the T-Mobile version but compatible with MetroPCS 100%. Metro PCS is under T-Mobile in the first place, pretty much the same thing except for the Start-Up & the apps. But it works! & the developer(s) that made the package did an amazing job!
If anyone needs further info feel free to contact me! I would be happy to assist in any way possible.
Click to expand...
Click to collapse
so i bought this phone about 3 months ago (SM-G530T1) and i bricked it 3 days after i bought it by installing busybox un-rooted. still not sure how that happened but that is not the point, the point is i flashed the only stock firmware i could find (at the time) and it just so happened to be a mis-marked T-mobile firmware package. i didn't let it bother me though and continued to gain root and flashed ShinySides [AOF8]. It worked like a charm! I was just running T-mobile FW on a MetroPCS phone and it just got confusing if you have to call costomer service lol. so i made sure it worked in every way and removed all the bloatware. the only problem i had was with the hotspot feature, it had a mind of its own and that got annoying but i dont really use it that often so i could live with that. the phone was a champ! so i went to find a recovery or twrp. i was looking and found TWRP 2.8.7.0...it was not for the SM-G530T1 but it sorta worked and when i say sorta i mean it does pretty much everything you want it to do except BACK UP FILES! Lol! (at least for me anyways) so i ran that with the T-Mobile software for a few months until lastnight... see I didnt know about the failure to back up my files issue so you have to understand that i fully expected the TWRP Backup files to work and last night when i went to restore one of the BUps it informed me that i had no OS anymore !! oh man i wanted to puke! Upon further inspection i realized that it was only backing up about 20% of my system only and i should have noticed but i didn't expect that and that is how we learn the difference between knowledge and wisdom right? OK so at that point i had a bricked phone (MY DAILY DRIVER i might add) and i was not to happy to lose all my personal info either, so i went back on XDA to see what i could do. i was very pleased to see that there was now a working MetroPCS Package compliments of TSAR3000 and I went to work. I flashed it via Oden and was happy to see the familiar MetrPCS logo again, but i needed to re-root it so i used the ShinySides [AOF8] just to see if it would worked with the metro Firmware and it did! it trips KNOX but i could care less cause i dont want that crap anyways and i get rid of it right away lol. I debated if i sould put this next part in the message but i decided i would because people should be weary of programs and roots applications and remember that this is the true reason we root and unlock our phones to begin with... so Im not a paranoid person by nature but i dont trust King root or any of those one click apps companies because of some article i read a while back about how the Chinese root apps and downloads could possibly contain spyware but i never found any truth to it but from what i do know about the Chinese government i dont take the chance but its my opinion and i like the good old fashion (though a little more involved) flashing of SuperSU or whatever you like. So yes if you want to use ShinySides root procedure do it cause it works with metro just fine. Good luck.
cl007x said:
I have the firmware 4 MPCS Galaxy Grand Prime SM-G530T1
Click to expand...
Click to collapse
could u pretty pleeeeeeeezzzzzzzz give me the link for it im begging you ive been searching for the firmware forever and i have not found it anywhere plez help :crying::crying::crying::crying:
veronica94 said:
could u pretty pleeeeeeeezzzzzzzz give me the link for it im begging you ive been searching for the firmware forever and i have not found it anywhere plez help :crying::crying::crying::crying:
Click to expand...
Click to collapse
tsar3000! Please give credit to the original uploader! it wont let me post a link but if you go to Stock FW for MetroPCS SM-G530T1 by Crazedmp3
im running it now and it works perfectly.
Lee_Garington said:
tsar3000! Please give credit to the original uploader! it wont let me post a link but if you go to Stock FW for MetroPCS SM-G530T1 by Crazedmp3
im running it now and it works perfectly.
Click to expand...
Click to collapse
OK but which one is it
It is metropcs stock rom it is right there in the thread directory.
Sent from my SM-G530T1 using XDA-Developers mobile app
Lee_Garington said:
It is metropcs stock rom it is right there in the thread directory.
Sent from my SM-G530T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
OK where do I put the files on odin
veronica94 said:
OK where do I put the files on odin
Click to expand...
Click to collapse
Put the file in AP slot and the metro pit file in the box marked pit and start. And in about 4 or 5 min your phone will reboot and the if you want root and recovery flash Mr Sunnyside's trap kernel AOF8 then after that flash recovery TWRP SM-G530H it's the one recovery I've been able to find that works.. Good luck
ShineLikeMe said:
Put the file in AP slot and the metro pit file in the box marked pit and start. And in about 4 or 5 min your phone will reboot and the if you want root and recovery flash Mr Sunnyside's trap kernel AOF8 then after that flash recovery TWRP SM-G530H it's the one recovery I've been able to find that works.. Good luck
Click to expand...
Click to collapse
i wish someone would have been kind to me and gave me this little rundown when i started rooting my phones way back in the day. direct and to the point good job! anyways i hope there is no issues... i dont see why there would be since i have been running this exact recipe for 7 days and i must say its a rare moment in the phone modifying world when you can say "perfect" this is one of those times... now if we could only get some rom up in here it would really be awesome. hey i jus want to warn you about that TWRP your about to use. i know it to have bugs personally.... the main issue is that it doesnt back up your Data Boot Or recovery or Cache LOL, but everything else works fine so far. it will however back up about 20% of your system and shut of LOL (Basically just enough to add insult to injury) so my advice is use it cause its the best we have but BACKUP SOMEWHERE ELSE! just use the TWRP to flash or do the little weird TWRP things you gotta do K? Good luck!
SM-G530T1
I'm new to this forum. I've soft bricked my Grand Prime, flashed it, put a custom Rom on it and installed TWRP. What I'm trying to do is find the device tree specifically for this phone. If there isn't, how would I go ahead and build it from scratch?
It wont work
Can you please help me it wont work for me it says failed each time i want to do this.
OPDelux said:
Can you please help me it wont work for me it says failed each time i want to do this.
Click to expand...
Click to collapse
Did you unlock the phone and get the developers option in settings menu?
I donated to you
Please send me the link. Paypal email is lmweiss716
i included a note.
please as soon as possible
cl007x said:
I have the firmware 4 MPCS Galaxy Grand Prime SM-G530T1
Click to expand...
Click to collapse