Database Users

[Q] Odin Troubles

[/INDENT]Yesterday I rooted my Verizon Galaxy Note III using the Towelroot method and everything was working. I installed SuperSU and all of the other works. Little did I know I went and installed CWM and soft bricked my device. I was able to follow steps given to me in a previous thread but the download links for the OTA 4.4.2 update were taking way too long. So I went and downloaded the 4.4.3 links and they downloaded in a fraction of the time. So I continued following the steps that were given except the file I downloaded is an .MD5 file and not a .PIT . So I guess this is two questions in one. 1. Is it ok for me to move up a version? 2. How do I use the MD5 in ODIN. If someone can give me a few pointers that would be great. Thanks so much. :cyclops:

TheCottonKid said:
[/INDENT]Yesterday I rooted my Verizon Galaxy Note III using the Towelroot method and everything was working. I installed SuperSU and all of the other works. Little did I know I went and installed CWM and soft bricked my device. I was able to follow steps given to me in a previous thread but the download links for the OTA 4.4.2 update were taking way too long. So I went and downloaded the 4.4.3 links and they downloaded in a fraction of the time. So I continued following the steps that were given except the file I downloaded is an .MD5 file and not a .PIT . So I guess this is two questions in one. 1. Is it ok for me to move up a version? 2. How do I use the MD5 in ODIN. If someone can give me a few pointers that would be great. Thanks so much. :cyclops:
Click to expand...
Click to collapse
4.4.3 is not available for the Note 3 and it will not work. Once you're on the OTA version of 4.4.2 you can not downgrade since you're on the NC4 bootloader. You'll have to enter download mode and flash the stock NC4 Tar file that you can find HERE. You have to put the .md5 file in the AP slot. Patience Grasshopper...

TheCottonKid said:
[/INDENT]Yesterday I rooted my Verizon Galaxy Note III using the Towelroot method and everything was working. I installed SuperSU and all of the other works. Little did I know I went and installed CWM and soft bricked my device. I was able to follow steps given to me in a previous thread but the download links for the OTA 4.4.2 update were taking way too long. So I went and downloaded the 4.4.3 links and they downloaded in a fraction of the time. So I continued following the steps that were given except the file I downloaded is an .MD5 file and not a .PIT . So I guess this is two questions in one. 1. Is it ok for me to move up a version? 2. How do I use the MD5 in ODIN. If someone can give me a few pointers that would be great. Thanks so much. :cyclops:
Click to expand...
Click to collapse
Buddy we cant install Custom Recovery like CWM or TWRP in our devices because out Bootloaders are locked, so never try it again...
The solution is to install the latest Safestrap v3.72 for Kitkat currently which is safe...
4.4.3 is still under testing for Note 3 and will be launched in future...currently the latest version for our device is 4.4.2,so no matter what dont try to install newer version which are not yet launched for Verizon Note 3...
Please follow this thread to flash in ODIN if you have bricked your device...http://forum.xda-developers.com/showthread.php?t=2610757
Make sure you download the NC4 Stock ROM only...
Thanks!!!

moin786 said:
Buddy we cant install Custom Recovery like CWM or TWRP in our devices because out Bootloaders are locked, so never try it again...
The solution is to install the latest Safestrap v3.72 for Kitkat currently which is safe...
4.4.3 is still under testing for Note 3 and will be launched in future...currently the latest version for our device is 4.4.2,so no matter what dont try to install newer version which are not yet launched for Verizon Note 3...
Please follow this thread to flash in ODIN if you have bricked your device...http://forum.xda-developers.com/showthread.php?t=2610757
Make sure you download the NC4 Stock ROM only...
Thanks!!!
Click to expand...
Click to collapse
Thanks so much! Do you mind taking a look at my "I think I broke my phone thread?"

ATT S3 Mini SM-G730A 4.4.2 Root Success

Please follow all the steps or you'll have bricked device
Step 1 :
This is the easiest way to enable USB debugging.
Dial *#0808#
Select last option, DM+Modem+ADB
YOUR PHONE MUST ASK FOR USB DEBUGGING AUTHORIZATION ! YOU MUST CHECK ALWAYS ALLOW FROM THIS COMPUTER AND THEN PRESS OK. IF YOU DO NOT GET THIS DO NOT PROCEED
Step 2:
Reboot phone into download mode
Select PDA slot in odin
And flash the tar file root kernel (you'll need to extract contents of rar file and rename file to boot.tar)
Your device will not have display but it will still be working, run saferoot.
Step 3:
Use saferoot thanks to k1mu, Surge1223, download is at the end of the post linked below
http://forum.xda-developers.com/showpost.php?p=48392009&postcount=1
After phone reboots for first time remove USB and enter download mode.
Step 4:
Select PDA slot in odin
And flash the tar file restore display kernel (you'll need to extract contents of rar file and rename file to boot.tar)
Step 5:
Install Supersu from market and open it. Continue with saferoot, that is waiting for the phone.

When flashing the root_boot.tar.md5 i get an error.
<OSM> MD5 hash value is invalid
<OSM> root_boot.tar.md5 is invalid.
---------- Post added at 03:24 PM ---------- Previous post was at 03:12 PM ----------
nvm, I fixed it by removing the .md5 extension.
You're awesome! Thanks!

Nice work.
Looks like we're flashing 4.2.2's kernel, rooting, then flashing 4.4.2's kernel again.
I guess this also means there is the potential to downgrade back to 4.2.2 completely with mobile odin now...

Did you guys have any trouble getting SuperSU to update the su binary?
SU works, just prompts me to update the binary and fails.

az4x4runner said:
Nice work.
Looks like we're flashing 4.2.2's kernel, rooting, then flashing 4.4.2's kernel again.
I guess this also means there is the potential to downgrade back to 4.2.2 completely with mobile odin now...
Click to expand...
Click to collapse
You can downgrade to 4.2.2, just flash the stock bootloader first, then it will let you flash the ROM. I had to do it because I bricked at the 4.4.2 upgrade.
Trying this root now!

djdevin said:
You can downgrade to 4.2.2, just flash the stock bootloader first, then it will let you flash the ROM. I had to do it because I bricked at the 4.4.2 upgrade.
Trying this root now!
Click to expand...
Click to collapse
I have not been able to find the JB bootloader. It's out there? The ROMs on Sammobile don't include it... I had previously bricked trying to downgrade due to the locked KK bootloader.

az4x4runner said:
I have not been able to find the JB bootloader. It's out there? The ROMs on Sammobile don't include it... I had previously bricked trying to downgrade due to the locked KK bootloader.
Click to expand...
Click to collapse
Sorry, I misspoke. I don't know if it was the bootloader or something else. Check this out: http://forum.xda-developers.com/showpost.php?p=55251936&postcount=18
Also, root works!
Someone want to explain how those two files could be flashed via ODIN?

djdevin said:
Sorry, I misspoke. I don't know if it was the bootloader or something else. Check this out: http://forum.xda-developers.com/showpost.php?p=55251936&postcount=18
Also, root works!
Someone want to explain how those two files could be flashed via ODIN?
Click to expand...
Click to collapse
They are stock kernel images. I've never had issues flashing stock kernels or recoveries with Odin.

az4x4runner said:
They are stock kernel images. I've never had issues flashing stock kernels or recoveries with Odin.
Click to expand...
Click to collapse
stock images from the sm-g730a? or another device?

djdevin said:
stock images from the sm-g730a? or another device?
Click to expand...
Click to collapse
From the SM-G730A.
"Root kernel" is simply the 4.2.2 stock kernel, which worked with Saferoot previously, and still does.
"Restore display kernel" is the stock 4.4.2 kernel you started with, you're just reflashing it after rooting.
I extracted boot.img from each ROM (4.2.2 and 4.4.2), created my own tar.md5 files and was able to root successfully also. I'm not sure why the ones in this post don't work with the md5 extension. It's a great idea.

az4x4runner said:
From the SM-G730A.
"Root kernel" is simply the 4.2.2 stock kernel, which worked with Saferoot previously, and still does.
"Restore display kernel" is the stock 4.4.2 kernel you started with, you're just reflashing it after rooting.
I extracted boot.img from each ROM (4.2.2 and 4.4.2), created my own tar.md5 files and was able to root successfully also. I'm not sure why the ones in this post don't work with the md5 extension. It's a great idea.
Click to expand...
Click to collapse
ah I see. that makes sense

az4x4runner said:
Did you guys have any trouble getting SuperSU to update the su binary?
SU works, just prompts me to update the binary and fails.
Click to expand...
Click to collapse
i have the same trouble

I just finished step 4 and how it keeps restarting and vibrating.

FIX for "Installation Failed when Updating Binary on SuperSU"
bam056 said:
i have the same trouble
Click to expand...
Click to collapse
az4x4runner said:
Did you guys have any trouble getting SuperSU to update the su binary?
SU works, just prompts me to update the binary and fails.
Click to expand...
Click to collapse
It seems that the SuperSU version (2.01) that is currently (13/10/2014) on the Play Store is outdated. You need to do the following:
1) Download v 2.13 of Chainfire's SuperSU from his Google+ page (I cannot post the link here as I am a new user)
2) Extract the .zip file and find 'Superuser.apk'
3) Transfer 'Superuser.apk' to SD card of your phone
4) Open 'Superuser.apk' from your phone and install/update
5) After the installation/update is complete, open SuperSU and update binary (normal method)
Good luck. I just used this thread to root my Samsung SIII Mini (SM-G730A) from Fido. Working great so far. Thanks atinder! :good:

Great post
It's a great post, I would like thank az4x4runner and wisdom and all of you guys, if you do it step by step is a 123 solve for the ATT S3 Mini SM-G730A 4.4.2 Root :good::good::victory::victory:

I can confirm that I've rooted my G730A using the steps given and with the SuperSU apk provided. The first thing I did was bypass Kitkat's SD card limitations -- everything is now exactly the way I want it. Thank you all!

I need help. I tired to root my g730a and I followed all the steps and now my phone has a blank screen with the blue light on. How can I fix this? thanks!
-----------------------------------
nvm, I got it to work.

Recovery
Which recovery works for 4.4.2?

Will this work on Verizon SIII mini running 4.4.2? I successfully rooted my Galaxy Tab with Odin and it was easy as pie. This looks a lot more complicated and I have already tried TowelRoot, Saferoot, etc with no success.

atinder said:
Please follow all the steps or you'll have bricked device
Step 1 :
This is the easiest way to enable USB debugging.
Dial *#0808#
Select last option, DM+Modem+ADB
YOUR PHONE MUST ASK FOR USB DEBUGGING AUTHORIZATION ! YOU MUST CHECK ALWAYS ALLOW FROM THIS COMPUTER AND THEN PRESS OK. IF YOU DO NOT GET THIS DO NOT PROCEED
Step 2:
Reboot phone into download mode
Select PDA slot in odin
And flash the tar file root kernel (you'll need to extract contents of rar file and rename file to boot.tar)
Your device will not have display but it will still be working, run saferoot.
Step 3:
Use saferoot thanks to k1mu, Surge1223, download is at the end of the post linked below
http://forum.xda-developers.com/showpost.php?p=48392009&postcount=1
After phone reboots for first time remove USB and enter download mode.
Step 4:
Select PDA slot in odin
And flash the tar file restore display kernel (you'll need to extract contents of rar file and rename file to boot.tar)
Step 5:
Install Supersu from market and open it. Continue with saferoot, that is waiting for the phone.
Click to expand...
Click to collapse
After flashing 1st boot.tar you say screen goes blank then run saferoot. After saferoot reboot will you have screen display again?

SAMSUNG SM-g900f (INTERNATIONAL)

Well I finally made the switch from Apple to android. I could no longer take the incompatibility with different toys at home. I used to work at RadioShack and I have rooted quite a few phones. I recently purchased a s5 international version, I need to root the phone for mirror play with my appradio. I have spent a few hours reading and trying, I took it to a droid friend of mine and he attempted with no joy. What info do you guys need from me to make thei happen. It says 5.0 (guessing lollipop)....... I tried rooting with Odin.
Thanks for any help guys

Flash TWRP then try flashing SuperSU.zip
budro574 said:
Well I finally made the switch from Apple to android. I could no longer take the incompatibility with different toys at home. I used to work at RadioShack and I have rooted quite a few phones. I recently purchased a s5 international version, I need to root the phone for mirror play with my appradio. I have spent a few hours reading and trying, I took it to a droid friend of mine and he attempted with no joy. What info do you guys need from me to make thei happen. It says 5.0 (guessing lollipop)....... I tried rooting with Odin.
Thanks for any help guys
Click to expand...
Click to collapse

^+1
Agree with previous poster, but you need to flash *specifically* twrp 2.8.7.0 klte......
For some reason, this version is the only one that works with some LP firmwares....
And make sure 'Reactivation Lock' is switched off before you start.
http://i.imgur.com/rVnFwJM.jpg

Thanks I'll try that version. I kno I've tried flashing twrp 10x. When I try to enter twrp mode it never works. It goes to the normal page. I'll do it again tonight when I get home so I can give very clear data regarding what I'm running into.

I have followed the instructions posted by others step by step and it either boots into recover mode as if twrp was never installed or freezes and goes into a boot mode flux. Wish I could just pay someone to root this phone..... I am beginning to think it can not be rooted..... Does anyone have a link for updated instructions bc the ones I'm using are from March 2015...... I am using Odin 3.09.

Did you try CF Auto Root first?
I don't see it mentioned
And try ODIN 3.10.7

He mentioned trying to root using Odin, I guess he tried CF method using the tar file.
*Detection* said:
Did you try CF Auto Root first?
I don't see it mentioned
And try ODIN 3.10.7
Click to expand...
Click to collapse
---------- Post added at 10:10 AM ---------- Previous post was at 10:10 AM ----------
Have inboxed you
budro574 said:
I have followed the instructions posted by others step by step and it either boots into recover mode as if twrp was never installed or freezes and goes into a boot mode flux. Wish I could just pay someone to root this phone..... I am beginning to think it can not be rooted..... Does anyone have a link for updated instructions bc the ones I'm using are from March 2015...... I am using Odin 3.09.
Click to expand...
Click to collapse

|QUOTE]Have inboxed you[/QUOTE]
Why inbox? Why not offer your potential solution to everyone?
http://i.imgur.com/rVnFwJM.jpg

androidtweaker1 said:
He mentioned trying to root using Odin, I guess he tried CF method using the tar file.
Click to expand...
Click to collapse
Flashing TWRP from ODIN then SuperSU from TWRP is another way to root using ODIN
But also, some people have no clue what they are doing, and try flashing all sorts from ODIN - without CF actually mentioned, we are guessing

Even with Lollipop, you can still root your Galaxy S5 using CF Auto Root. It is flashable via Odin.
When you install custom ROMs or recovery like TWRP, make sure Reactivation Lock is disabled or else it will block any custom binary it would detect.
Sent from my SM-G900F using XDA Forums

trouble
hi,
i root my s5 g900f and installed xtrolite rom and now i want to install miui or liquidrom i cant goto recoverymod it shows some block by reactivationlock i treid to format erase but there are issues in settings.
now i m stuck in xtrolite rom.
someone please guide me what shall i do nothing is working. as per whole net world i tried but now m looking hopeless.

Juzer zoaib said:
hi,
i root my s5 g900f and installed xtrolite rom and now i want to install miui or liquidrom i cant goto recoverymod it shows some block by reactivationlock i treid to format erase but there are issues in settings.
now i m stuck in xtrolite rom.
someone please guide me what shall i do nothing is working. as per whole net world i tried but now m looking hopeless.
Click to expand...
Click to collapse
Download a stock firmware from sammobile.com, preferrably ANE2 KitKat build. Flash it via Odin then once the firmware works, go to Security settings then disable Reactivation Lock. You should be able to flash a custom recovery and boot to it then.
Sent from my SM-G900F using XDA Forums

I need help please

Hi guys if someone can help me it will be great,i have Samsung S5 G900H and I need to install Marshmallow 6.0.1 but the problem is than my usb connector dont work. and I need to install the rom via micro sd card
if someone can teach me how can I do that, and where can I get the files to make it for install the rom ,and how to install it step by step ,thx

Woaaaa I see nobody can help me,it is so sad

pacoelo said:
Woaaaa I see nobody can help me,it is so sad
Click to expand...
Click to collapse
I will give you a flashable zip of Stock S5 G900H Deodexed 6.0.1 MM Rom if you want
You can Flash it via TWRP
---------- Post added at 04:37 PM ---------- Previous post was at 04:15 PM ----------
@pacoelo
Here is The Links For
UnAltered ROM - G900H DeOdexed MM 6.0.1 INU ( Only For Testers )
https://drive.google.com/open?id=0B6YfELxJkuUNYzl3eUlBVS1QM2s
TWRP Recovery & SuperSU 2.76
https://drive.google.com/open?id=0B6YfELxJkuUNenZqbllheWEta3M

thx yash92duster, i will try to do that , I think the first step is install the TWRP Recovery and second install the Rom right? sorry i am noob

pacoelo said:
thx yash92duster, i will try to do that , I think the first step is install the TWRP Recovery and second install the Rom right? sorry i am noob
Click to expand...
Click to collapse
Yes
First goto download mode in mobile by pressing
Power+home+volume down buttons at same time for 5 seconds
Extract the twrp zip and load it in odin in AP tab
Then
Then connect to system and flash twrp via odin
Then
In twrp recovery clear data, internal, cache,dalvik and preload
Then flash the rom zip from sd card

You'll need to flash TWRP via ODIN first. Or you can use CF-Root and then install TWRP using TWRPManager but that would also require an Odin flash. Considering your "usb connector" isn't working, I cant think of any possible way.
Did you try changing the usb wire?
G900F using XDA App

yes my friend it is the problem I can not use odin because the usb isn't working that is why i need to flash via micro sd, and yes I did changing usb wire as well

If your phone already has root you can download flashfire from playstore and use that to install the update from your SD card, either an Odin .tar file or a zip file.

Yes daroco my S5 is rooted and I have flashfire as well ,but what recovery TWRP Do I need to flash for this way? thx

Use original Samsung cable and check if it works

yash92duster my friend I am using original Samsung cable, but the problem is same, I am sure I have corrupted files on my Rom , that is why i want to flash the Rom to fix that issue

pacoelo said:
yash92duster my friend I am using original Samsung cable, but the problem is same, I am sure I have corrupted files on my Rom , that is why i want to flash the Rom to fix that issue
Click to expand...
Click to collapse
Ok

Soft Brick??

Hello all,
Today I updated a custom ROM on my rooted Phone (android 7) . In the aroma installer i select no root. After a good restart i though i root my Phone true Odin. I was thinking it went all good till it was stuck on te Galaxy s7 edge black screen. I couldnt do nothing. After that i was thinking to flash to stock. Every time i try to flash true Odin it give me fail.
Please help me.
Best regards Sidi

Hi there, I have same issue, have s7 edge sm-G935F stuck at logo. I downloaded 2 different firmware from z3x box(shell) and if keep failing when using odin (latest) and also getting error when using Samsung tool.Also I can't get in the phone menu to check the baseband..can only get model from download model.any advice to this?

Same issue as well on my sm-g985v Verizon variant
Flashed an update to work out minor lagging bugs and soft bricked my S7. Can access bootloader and recovery. Beyond that, the phone gets there but with black screen and it is sputtering off and on. Tried reflashing stock firmware with odin, and its not taking. Running into a permission error while trying to write the image. Anyone here have any ideas?

sidi adam said:
Hello all,
Today I updated a custom ROM on my rooted Phone (android 7) . In the aroma installer i select no root. After a good restart i though i root my Phone true Odin. I was thinking it went all good till it was stuck on te Galaxy s7 edge black screen. I couldnt do nothing. After that i was thinking to flash to stock. Every time i try to flash true Odin it give me fail.
Please help me.
Best regards Sidi
Click to expand...
Click to collapse
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-e...0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Feyaad said:
Hi there, I have same issue, have s7 edge sm-G935F stuck at logo. I downloaded 2 different firmware from z3x box(shell) and if keep failing when using odin (latest) and also getting error when using Samsung tool.Also I can't get in the phone menu to check the baseband..can only get model from download model.any advice to this?
Click to expand...
Click to collapse
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
Also, have you guys flashed the right bootloader and modem beforehand?

LyLu said:
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-edge/development/recovery-official-twrp-hero2lte-3-0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
Click to expand...
Click to collapse
Hello,
Thanks for your message. I tried everything you said exept that i used odin 3.12.5
But still the black screen...

sidi adam said:
Hello,
Thanks for your message. I tried everything you said exept that i used odin 3.12.5
But still the black screen...
Click to expand...
Click to collapse
What rom you tried to flash?
Are you on the right bootloader and modem?

Well I have the Odin latest version already..but I can't know which is the correct baseband or county..only the model I know when it's in download mode..

sidi adam said:
Hello all,
Today I updated a custom ROM on my rooted Phone (android 7) . In the aroma installer i select no root. After a good restart i though i root my Phone true Odin. I was thinking it went all good till it was stuck on te Galaxy s7 edge black screen. I couldnt do nothing. After that i was thinking to flash to stock. Every time i try to flash true Odin it give me fail.
Please help me.
Best regards Sidi
Click to expand...
Click to collapse
So you flashed a beta firmware, the name of which you don't feel is necessary information.
OK. Shame I hate popcorn. How about INFORMATION instead?!

LyLu said:
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-e...0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
Also, have you guys flashed the right bootloader and modem beforehand?
Click to expand...
Click to collapse
It was my understanding it was already in the package. Questioning that one now. Where do i look for that? And thank you for responding back. Downloading your first suggestions as i type this...

I have downloaded two non branded firmware for the Netherlands from samdroid. I had unpacked the zip and flashed the files. For the csc selection I put the one named home csc

Moodruid said:
It was my understanding it was already in the package. Questioning that one now. Where do i look for that? And thank you for responding back. Downloading your first suggestions as i type this...
Click to expand...
Click to collapse
When downloading original firmware there should be 4 files when unzip.
1 for each of the options in Odin, without the last one named home.
Some of the custom roms comes with bootloader and modem, but NOT ALL.
Most times you have to flash the right bootloader and modem in Odin beforehand to get the phone to boot.
Im unsure of what has happened because I have never run into issues myself.
If you can not get the phone to boot with firmware from Sammobile and Odin flash I am out of options.
If I do experience a problem like this I would:
-install bootloader and modem according to the custom rom used. Try and flash these with odin more than ones, if not working.
-if no recovery, try flash recovery again
-try flash another custom rom then another custom rom
-return to stock firmware downloaded trough Sammobile
If none of these options work im out of things to do, sorry
The times I have experienced phone stuck on Samsung logo, it has been because of bootloader and/or modem.
Flashing the right ones have always fixed the problem.
That said, I have never experienced problems with returning to stock firmware trough Odin, maybe one time.
And this time my firmware download was corrupted.
---------- Post added at 06:13 AM ---------- Previous post was at 06:00 AM ----------
sidi adam said:
I have downloaded two non branded firmware for the Netherlands from samdroid. I had unpacked the zip and flashed the files. For the csc selection I put the one named home csc
Click to expand...
Click to collapse
This is wrong, you should use the file named only CSC.
Home_CSC, is to keep your setup on phone as is.
I also remember that you have to remove the meta data directory, and then repack firmware or the install will stop.
And this is also NOT a good option if you use another firmware than the original on phone.
Installing firmware with Odin, always use BL, AP, CP and CSC.
Try this and forget about the Home_CSC.
I don't have anymore info, sorry

Thank you very much. I will try it. I will let you know.

Gentlemen, my appreciations and thanks. Was able to finally get the stock firmware to grab. After more time disecting the problem i learned about and was able to uncover the maintenance boot screen. There it had the option to do usb debug . Once i hit that, next flash finished fully. It must of reser in the dev options after the initial root. Damn, i was sweating balls for a bit thinking i must of hard bricked it somehow. I will take it throufh the toot process later today glitch free i imagine. Thanks again for assisting,

Moodruid said:
Gentlemen, my appreciations and thanks. Was able to finally get the stock firmware to grab. After more time disecting the problem i learned about and was able to uncover the maintenance boot screen. There it had the option to do usb debug . Once i hit that, next flash finished fully. It must of reser in the dev options after the initial root. Damn, i was sweating balls for a bit thinking i must of hard bricked it somehow. I will take it throufh the toot process later today glitch free i imagine. Thanks again for assisting,
Click to expand...
Click to collapse
Usb debugging should always be turned ON when flashing..........!
Tis is like common knowledge in here.
Anyway glad things work

LyLu said:
Usb debugging should always be turned ON when flashing..........!
Tis is like common knowledge in here.
Anyway glad things work
Click to expand...
Click to collapse
How will you get to turn on USB debugging when the phone can only booth into download model?

Feyaad said:
How will you get to turn on USB debugging when the phone can only booth into download model?
Click to expand...
Click to collapse
Buy pressing and holding power and volume down key, until you get to the screen.
Same procedure as download mode, but without the big button

LyLu said:
Buy pressing and holding power and volume down key, until you get to the screen.
Same procedure as download mode, but without the big button
Click to expand...
Click to collapse
OK great..will try it..thank you

luly said:
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-e...0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
Also, have you guys flashed the right bootloader and modem beforehand?
Click to expand...
Click to collapse
Even this thread is old:
Thank you so much, bricked my phone unknowingly flashing custom recovery using a defektive usb port struggling to get it working again. This worked like a charm.
Don´t understand why the orthers did struggle with that method.