Database Users

[Q] Flashed albinoman887's new 4.3 ROM - keyboard not working

[Note: I posted this a few minutes ago as a reply to another post in the "4.3 ROM" thread in this forum, then realized it would likely be overlooked there. Please forgive the duplicate post. n00b]
Great news that albinoman887 got 4.3 off the ground. Unfortunately, I have a problem, and since I'm the junior...est of members, I can't yet post in the development thread where I could ask him this directly.
I did a factory reset on my MyTouch 4G, installed Albinoman's 4.3 (cm-10.2-20130813-Albinoman887-glacier.zip) ROM and the new GApps (gapps-jb-20130726) zip linked to in his thread, rebooted, and everything appeared to be working until it was time to enter and sync to my GMail account, at which point I received an error message indicating that the AOSP Android keyboard had closed. Sure enough, every time I attempted to input anything, the message reappeared and I had no way of logging into my Google account. Touch screen input works, but without a keyboard, that's as far as I could go.
Thinking maybe I had a corrupted GApps zip, I did another full wipe, re-flashed the ROM, and this time tried the 07/13 GApps zip; unfortunately, when I rebooted, I got identical behavior. Since I needed to use my phone as a, you know, phone (they still do that!) tonight, I did yet another wipe, flashed the latest 4.2 ROM (also from Albinoman) and, to make sure it worked, the newest 07/26 GApps. No problems, seems to work perfectly.
I've checked albinoman's 4.3 thread, and, while there are a few bug reports, no one else seems to be having this keyboard problem.
Any suggestions? As a n00b, is there any way for me to message albinoman directly without coming off as a whiny d-bag?
Thanks in advance...

Re: Flashed albinoman887's new 4.3 ROM - keyboard not working
jdburns said:
[Note: I posted this a few minutes ago as a reply to another post in the "4.3 ROM" thread in this forum, then realized it would likely be overlooked there. Please forgive the duplicate post. n00b]
Great news that albinoman887 got 4.3 off the ground. Unfortunately, I have a problem, and since I'm the junior...est of members, I can't yet post in the development thread where I could ask him this directly.
I did a factory reset on my MyTouch 4G, installed Albinoman's 4.3 (cm-10.2-20130813-Albinoman887-glacier.zip) ROM and the new GApps (gapps-jb-20130726) zip linked to in his thread, rebooted, and everything appeared to be working until it was time to enter and sync to my GMail account, at which point I received an error message indicating that the AOSP Android keyboard had closed. Sure enough, every time I attempted to input anything, the message reappeared and I had no way of logging into my Google account. Touch screen input works, but without a keyboard, that's as far as I could go.
Thinking maybe I had a corrupted GApps zip, I did another full wipe, re-flashed the ROM, and this time tried the 07/13 GApps zip; unfortunately, when I rebooted, I got identical behavior. Since I needed to use my phone as a, you know, phone (they still do that!) tonight, I did yet another wipe, flashed the latest 4.2 ROM (also from Albinoman) and, to make sure it worked, the newest 07/26 GApps. No problems, seems to work perfectly.
I've checked albinoman's 4.3 thread, and, while there are a few bug reports, no one else seems to be having this keyboard problem.
Any suggestions? As a n00b, is there any way for me to message albinoman directly without coming off as a whiny d-bag?
Thanks in advance...
Click to expand...
Click to collapse
The same issue did occur for me as well a couple of times, however I already had SwiftKey as the default keyboard prior to installing the update. So I could at least get in to the system. Once the phone booted up, I navigated to Settings -> Language and Input, and tapped on Android keyboard. The error doesn't show up for me anymore.
You can try setting another keyboard as the default before updating to 4.3. It may work for you too.
Hope this helps.

Same thing happened to me. I just went back to 4.2.2 for now since I need a stable DD. I'm sure albino will get it going!
Sent from my myTouch 4G using xda app-developers app

Solution for Keyboard issue 10.2
Hi everyone.
The problem is gapps package. The package that Goo Manager suggests is only for 4.2 not for 4.3
You have to download this and install it from recovery.
Look here, the second link on the post
http://forum.xda-developers.com/showthread.php?p=44607338
Unless in my HTC Sensation worked like a charm
Regards
Jorge

[Q] About Defy+ & CM11

I've been using Quarx's CyanogenMod 11.0 (KitKat 4.4.2) since its January 20 release. However, my phone starting to become slow with the time (nothing related to the build but the extensive device use & data exchanging). Today i decided to upgrade to most recent build (NIGHTLY 23/03). Of course i wiped everything before. I installed the build directly from TWRP with no big problems, however, i disliked this "new"? recovery interface (this one that shows two options (RECOVERY) and (ANDROID) and this "Press search to load the system" thing. I Would like to disable it and return to the old M logo, where i had the blue led to warn me about the recovery thing. Is this possible? I mean, take this thing out?
Now the most important. As i said, i've been on the development thread since the beginning, but i didn't found any working answer to my situation. After trying both GAPPS 4.4.2, i see a black screen on first boot with the Standard GAPPS and only a "Choose your laguage" with Minimal, after chosen i get a "Launcher stopped working".I cant add the google account without the GAPPS, as some peoples suggested to another on that topic. I remember that i read something related to install the previous working build (20/01) and then upgrade to the newer, after setting the account on the older build. But theres no january 20 on quarxs ftp, what now? HELP PLS

System + data + cache wipe, use core gapps 2-26. If you encounter issues, then again install rom after full wipe, but don't install gapps immediately. Reboot, and delete unwanted system apps to free up space, and then flash gapps and wipe cache
No easy way to backport safestrap (replacement for boot menu)
Sent from my MB526 using Tapatalk

johnaddams83 said:
I've been using Quarx's CyanogenMod 11.0 (KitKat 4.4.2) since its January 20 release. However, my phone starting to become slow with the time (nothing related to the build but the extensive device use & data exchanging). Today i decided to upgrade to most recent build (NIGHTLY 23/03). Of course i wiped everything before. I installed the build directly from TWRP with no big problems, however, i disliked this "new"? recovery interface (this one that shows two options (RECOVERY) and (ANDROID) and this "Press search to load the system" thing. I Would like to disable it and return to the old M logo, where i had the blue led to warn me about the recovery thing. Is this possible? I mean, take this thing out?
Now the most important. As i said, i've been on the development thread since the beginning, but i didn't found any working answer to my situation. After trying both GAPPS 4.4.2, i see a black screen on first boot with the Standard GAPPS and only a "Choose your laguage" with Minimal, after chosen i get a "Launcher stopped working".I cant add the google account without the GAPPS, as some peoples suggested to another on that topic. I remember that i read something related to install the previous working build (20/01) and then upgrade to the newer, after setting the account on the older build. But theres no january 20 on quarxs ftp, what now? HELP PLS
Click to expand...
Click to collapse
do not use standard gapps..system partition not big enough to store standard gapps..install core gapps

[Q&A] [ROM][4.4.4]VanirAOSP[OFFICIAL][Samsung X Cover 2-GT-S7710]

Q&A for [ROM][4.4.4]VanirAOSP[OFFICIAL][Samsung X Cover 2-GT-S7710]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

hi , installed this rom but i still haven't network connection

Double boot when starting phone
Hello all together.
Yesterday I flashed the latest rom on my skomer.
So far everything runs smooth but I recognized one weird thing.
During boot (doesn't matter if a warm or cold start), the phone boots twice.
Means I see the Pin entry screen and after approx. 15s I see the boot animation again.
It does not matter if I enter the pin or not, it boots a second time at all.
After the second boot everything is OK.
This was a clean flash from theboegls prerooted image with normal pa gapps flashed.
Does anyone have a solution for this issue!
Thanks a lot,
Kubunter

Just installed the new nightly(4.4.4.101014) Everything is running smooth. Just wondering if there is a radio for android 4.4.4 and how do i get it if there is?
---------- Post added at 10:10 PM ---------- Previous post was at 09:55 PM ----------
ManuelBiancolilla said:
hi , installed this rom but i still haven't network connection
Click to expand...
Click to collapse
I read the forum and tried this code and it worked for me.
run this code in your terminal if you cant find terminal get if from playstore using wifi.
adb shell
su
find /efs/|while read s; do chown radio:system $s; done;
find /modemfs/|while read s; do chown radio:system $s; done;
chmod -R 777 /efs/
chmod -R 777 /modemfs/
reboot
After reboot your mobile data should be working

Camera not working
Thank you for your great work, hopefully devs are reading this subthread, too.
It would be nice, if following message would be referred on the first message, since many people have issues with network. I managed only to find all the information by very inconvenient googling:
http://forum.xda-developers.com/showpost.php?p=55354795&postcount=414
This post is the Theboegl's relevant one:
http://forum.xda-developers.com/show...3&postcount=43
After the newest nightly, camera stopped working. I will downgrade, but here are some details:
Model:
GT-S7710
Incremental version:
eng.nuclearmistake_20141012.042853
Running apps:
Nothing extraordinary
Exception class name:
java.lang.NullPointerException
Source file:
PhotoModule.java
Source Method:
initializeFocusManager
Line number:
1997
Start trace:
PhotoModule.java: 1997, 1835, 96 and 234
Cleaned cache+camera data. I was using SIM-card as my memory.
ManuelBiancolilla said:
hi , installed this rom but i still haven't network connection
Click to expand...
Click to collapse
Did you use the right clockworkmod mentioned on the main post? Also your firmware might be too new, therefore flashing this one might help:
http://forum.xda-developers.com/showpost.php?p=40232503&postcount=43]

If I got it right it must be
- install odin and get cwm on pc
- get supersu and cm on your sd card
- reboot in download mode
- flash cwm on phone
- reboot in Recovery
- well i think you can backup already
- root with supersu
- reboot in Recovery
- wipe data/factory
- install
- reboot​
I use 1010114
wifi and camera work here, but sim card seems not to be accepted
good use of hardware buttons after reflashing (this had issues before)
[did not install GApps, but that should not be a problem..?]
tried 10.2 from flxo and had the same problem with SIM

Double Boot
Hello all together,
I have a logcat of the problem, saved at pastebin.
As I´m a new user, I´m not allowed to post a outside link.
Is it possible that I will send someone who is able to post a link a PM?
The second boot happens around 22:44:54 o´clock
Something with a android process seems to be wrong.
Is anyone able to help?
Thanks a lot,
Kubunter

Android Lollipop?
Pushed fix for streaming YouTube should now work next nightly. Downloading source now to build recovery image. Thanks for waiting. I will try to solve the problems we have but I can't guarantee anything due to lack of device. I'm going to discontinue my work for ste devices soon. As long as it builds I will try my best to keep supporting them but fixing problems etc I can no longer continue.
Click to expand...
Click to collapse
@Unjustified Dev, will you made Android 5.0 for xcover 2? (Because you discontinue development)

andrew551 said:
@Unjustified Dev, will you made Android 5.0 for xcover 2? (Because you discontinue development)
Click to expand...
Click to collapse
There are still STE developers and I'm sure this one will get lollipop working if he can't I doubt we will see it , but lollipop might be a large merge and roms might have to rebase or start from scratch porting hardware workarounds and eventually bring back features.

intermittent network signal
Guys please help. I tried this ROM and it looks great but I'm loosing network signal almost every time I'm starting up navigation (Sygic) and I use it a lot. I don't loose it immediately, sometimes after a few minutes, sometimes after 20 min. but the signal triangle finally goes black and doesn't come back after switching off navigation. This makes it unusable to me. I've seen people reporting problems with network signal so I guess it's not the app. issue. Sometimes it looks like I just loose data transfer (it shows no internet) but the signal bar shows that I have network. Some other time I was not moving at all but the signal bar was going up and down from max. to min. within 3 sek. After few minutes it stabilized. Something seems to be wrong with the antenna or modem, whatever is responsible for network signal.
And another thing, that looks to be related, I don't have any arrows and network type sign (2G/3G) showing if I do or don't have internet connection.
There were some posts talking about a fix for network problem by typing some commands somewhere but could someone explain it step by step how to apply it, if it is a working fix.
Thanks!

After a reboot the home button doesn't work until I enter my pin code, which comes like half an hour after boot! How do I fix it and does anyone else have this problem!?

I was about to throw this piece of **** phone away but i gave it a last chance with Vanir. It took me nearly 2 hours to flash the Rom , but i got it working.
First of I want to thank the dev for the work, I realy apreciate it. You managed to make this phone usable again, I hate Samsung so much for this crap Software they used for the Xcover2.
After using Vanir for one week (using not testing), here is what is not working for me:
-maximum volume for every call
-stock photo app crashes
-Location is very inaccurate, my guess is the cell tower fix is working and the GPS is not
-sometimes i cant shut off the phone, it freezes and i have to pull the battery
-phone is sometimes not going to sleep mode, i have to restart it
Everything else is working perfectly, this is thousand times better then the Samsung bull****. Oh, my carrier is Telekom(Germany).

No radio/SIM with GT-7710 XCover 2 on CM11
The forum forces me to open a new thread, apologies.
I gave the Vanir Skomer 4.4.4.101714 nightly a try but my broadband (S7710XXAND2)/IMEI is gone after reboot. Big difference to most reports I've read is that once I return to stock ROM all is fine again. In other words: the SIM was not damaged. Also the chmod/chown and move-files-from-stock trick doesn't improve anything. No idea what else I should try. I'm currently back on stock Android.
This is what I've done:
- Use Odin 3.09 to apply 20140112_cwm-6.0.4.6_skomer_fixed.tar.md5
- Boot into CWM
- Update to CWM 6.0.4.7 via cwm_skomer_test2.zip
- Wipe/Factory + Dalvik reset
- Install vanir_skomer_4.4.4.101714.zip (also tried 20131231_cm_11.0_skomer-ota-eng.flx.zip)
- Install pa_gapps-modular-pico-4.4.4-20141019-signed.zip
- Wipe/Factory + Dalvik reset
+ Copied {efs,modemfs} from stock to vanir (removed vanir's folder contents before)
+ Fixed file perms to 666, folders to 777, owner to radio:system
I couldn't find TWRP for Skomer or a more recent clockwork recovery. Just mentioning this because I've read a post that mentioned recovery is responsible for setting radio related stuff.
Ideas?

Network connection doest work for me to. I like this rom too and like to be it get worked! (Y)

Never mind, fixed my radio issue. See http://forum.xda-developers.com/showpost.php?p=56293409&postcount=37

vanir_skomer_4.4.4.101714
I got that one and currently it's syncing but I have no mobile networks. I'm from Finland and I'd like to know what data I should post to help fix it. (I could recompile and all if I get instructions)
__
Your's Mikko A. Liukkonen

Kiil said:
After the newest nightly, camera stopped working. I will downgrade, but here are some details:]
Click to expand...
Click to collapse
Just wanted to confirm with my Vanir nightly of 101714, my camera app crashes too. No problems with radio or networking though.

Cant call, says my phone is currently airplane mode
hello, just installed the latest (vanir_skomer_4.4.4.102814) and now my phone can't find network and says that airplane mode is on when i try to call. Airplane mode button says it's off and kills the bt and wifi if i turn it on, aka goes to real airplane mode.
Fix for this would be more than welcome.

itsesaatana said:
hello, just installed the latest (vanir_skomer_4.4.4.102814) and now my phone can't find network and says that airplane mode is on when i try to call. Airplane mode button says it's off and kills the bt and wifi if i turn it on, aka goes to real airplane mode.
Fix for this would be more than welcome.
Click to expand...
Click to collapse
What's the latest stock update because we are having incompatible installation due to my kernel being based on older release and blobs

Unjustified Dev said:
What's the latest stock update because we are having incompatible installation due to my kernel being based on older release and blobs
Click to expand...
Click to collapse
What do you mean by stock update?
Edit:
Seems like it's working again, it woke up after an hour. Sorry for the trouble.

[Q&A] [ROM][OFFICIAL] CyanogenMod Nightly Builds for jfltespr

Q&A for [ROM][OFFICIAL] CyanogenMod Nightly Builds for jfltespr
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL] CyanogenMod Nightly Builds for jfltespr. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Struggling with CyanogenMod 11
I installed last night with Philz recovery (most recent version), factory reset, wiped cache and dalvic cache first. Things appeared to be running smoothly initially but I realize I don't have any sound (DSP manager crashes when I open it or when I open Apollo). I'm not able to answer or make phone calls. I'm pretty new at this - do I need to update my modem? I know Knox got installed (0x1) and the baseband version says mk2. Is there a ROM that would work better for my phone?Can I install rom that say NAE and NG2? I'm just looking for something that's stable and has great battery life. Or is there something I'm doing wrong with Cyanogenmod?
Here's info in the about phone page:
SPH-L720
11-20141008-SNAPSHOT-M11-jflte
4.4.4
L720VPUEMK2 (baseband)
Kernel 3.4.104-cyanogenmod-gc55a5d6 etc
CPU ARMv7
Memory 1809 MB
Please help.

A second thorough wipe may be worthwhile. Otherwise download a fresh cm copy as the other may have gotten corrupted. Reload and reflash.

garbage914 said:
I installed last night with Philz recovery (most recent version), factory reset, wiped cache and dalvic cache first. Things appeared to be running smoothly initially but I realize I don't have any sound (DSP manager crashes when I open it or when I open Apollo). I'm not able to answer or make phone calls. I'm pretty new at this - do I need to update my modem? I know Knox got installed (0x1) and the baseband version says mk2. Is there a ROM that would work better for my phone?Can I install rom that say NAE and NG2? I'm just looking for something that's stable and has great battery life. Or is there something I'm doing wrong with Cyanogenmod?
Here's info in the about phone page:
SPH-L720
11-20141008-SNAPSHOT-M11-jflte
4.4.4
L720VPUEMK2 (baseband)
Kernel 3.4.104-cyanogenmod-gc55a5d6 etc
CPU ARMv7
Memory 1809 MB
Please help.
Click to expand...
Click to collapse
Hey garbage914, granted it's been several days, just wondering if you got your ROM issues sorted? I don't know much but glad to help in any way possible.

Cant connect to camera
Sent from my SPH-L720 using XDA Premium 4 mobile app

passlogin said:
Cant connect to camera
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I got the same thing when I was using the front facing camera today. Took one picture then FC. Had to reboot to connect again.

Probably the fastest rom iv tried. But WiFi signal comes and go. Some applications close by then self. And the voice recording is terrible.

SIM problems
Is there any way to use CM12 without having a SIM card inserted because it won't allow the phone to connect to any network even though I've ben using my phone on Boost Mobile for almost a year now.

I'm running TWRP and the 2/8 nightly, I've been unable to access my developer options since the flash, even with factory reset before and after flash. Also having issues with the camera, seems to only want to take a few photos before it just stops capturing and force closing, leading to "unable to connect to camera". Any thoughts on the dev options issue?

babyshrimps said:
I'm running TWRP and the 2/8 nightly, I've been unable to access my developer options since the flash, even with factory reset before and after flash. Also having issues with the camera, seems to only want to take a few photos before it just stops capturing and force closing, leading to "unable to connect to camera". Any thoughts on the dev options issue?
Click to expand...
Click to collapse
same thing here I got the rom today and it was working perfectly but then I tried switching to record video and it froze and closed. Now when I try to open it, it say "can't connect to camera" any solution?

Camera Won't Work
Everything was running smooth but then I decided to record a video so after taking a few pictures I switched to video record. It frozee for a second and then closed the program. I clicled on camera again and a message popped up saying:
"Camera error
Can't connect to the camera."
I have CyanogenMod Version:
12-20150226-NIGHTLY-jfltespr
I tried closing disabling the camera app but no luck.

Move from CM12 nightly to Lollipop Stock Rooted
Greetings!
I've been running the Cyanogenmod 12 nightly build 12-20150224-NIGHTLY-jfltespr on my S4 (baseband L720PUFNG2) with ClockworkMod 6.0.4.7 installed. I've been experiencing some battery issues and miss features included in the stock Samsung ROMs, such as a working IR blaster and multiwindow support, and would like to move from CM12 to a stock AND ROOTED configuration. I have a few questions:
1) Where do I obtain the *correct* ROM to flash? I'd like Samsung's stock rooted Lollipop, *if possible*.
2) Do I run TriangleAway FIRST, and then flash, or flash, and THEN run TriangleAway?
3) After I flash the stock ROM, am I safe to recover user apps AND system data with Titanium Backup, or should I simply start fresh, being spring and all?
4) What about KNOX? Will it complain/cause issues/take off and nuke the entire site from orbit?
BTW, I *have* searched these forums, but there's almost an ocean of data to sift through even so, and most of my results date from 2013/2014. I don't want to get this wrong, as this is my only phone, and I've already softbricked for a day (no PIT found!), and want to avoid that happening again if possible.
I'll keep hunting for what I want on my own, but any help you geniuses here can provide would be.... well, helpful.
Thanks!

Did you make a nandroid backup of your stock ROM before you went down the custom ROM route?

meldryn said:
Did you make a nandroid backup of your stock ROM before you went down the custom ROM route?
Click to expand...
Click to collapse
No, and that answer probably means, apart from "do a nandroid backup next time, idiot", that I have to do a full wipe and can't restore my user data. I'm actually fine with that, as I don't really have any information on my phone that isn't already attached to my Google account or otherwise stored in the cloud.
What are the consequences beyond losing my data because I didn't do a Nandroid backup, if any?
And where do I get the stock ROM, etc.?

I see a bit of a green tint after latest updates (03/08 and 03/11).
I see a bit of a green tint after latest updates (03/08 and 03/11). This is not hardware issue. Is there anyone who noticed same problem?

occulus said:
No, and that answer probably means, apart from "do a nandroid backup next time, idiot", that I have to do a full wipe and can't restore my user data. I'm actually fine with that, as I don't really have any information on my phone that isn't already attached to my Google account or otherwise stored in the cloud.
What are the consequences beyond losing my data because I didn't do a Nandroid backup, if any?
And where do I get the stock ROM, etc.?
Click to expand...
Click to collapse
well not making a nandroid could be bad because you could have a bad flash and soft brick and all u have left is download and/or recovery mode and u can always go back to having a functioning phone with your backup. And plus running cm12 u could restore your back up and update your prl and profile then restore your cm12 or do the same for a gps lock. Always make a back up man. U can get the stock touch wiz by either searching the forum for it which I'm sure it's here or u can go to sammobile type in sph-l720 and download the current stock tar file then re root and make a back up of stock before u even delete any bloat that way u will always have a completely stock back up.

http://howto.highonandroid.com/samsung-tutorials/how-to-extract-stock-recovery-from-samsung-firmware
Sent from my SPH-L720 using XDA Free mobile app

Installed the 3/28 nightly last night and really digging it. I don't use it as a phone so I won't be able to test that aspect. About the only bug I've come across is that Falcon Pro 3 Twitter client can't play Youtube videos inside the app. Works on stock Lollipop. Not a biggie but thought you guys might want to know about it. NFC seemed to work great when I used it during initial setup. Camera pics and video looks great. Will try testing Bluetooth with file transfers to Nexus 7 (2013) tablet later. I'll try to report any other issues I encounter in this thread. Thanks for the really excellent work.
Edit: Well, I just played a YouTube video within Falcon Pro 3 (from The Verge Twitter account) and it played flawlessly. So that last attempt was either a borked link or who knows?

I am having the same issue with 13., moving back to 12 trying a new download.

junior92x said:
same thing here I got the rom today and it was working perfectly but then I tried switching to record video and it froze and closed. Now when I try to open it, it say "can't connect to camera" any solution?
Click to expand...
Click to collapse
Haven't found one other than buying a new phone haha! Still using the S4 but can't figure out the problems

Problems CM based roms

Hi I got problems with my lux on every cm based rom. On every cm rom I get no reception of my carrier. I don't know if it's a device tree issue or just apn trouble. Since there are no aosp roms, I'm a little hung up. Stock rom works fine. I own the xt1562 operating on German carrier o2. Sometimes I get a few seconds of reception on cm roms, but it's leading just to no signal after a few seconds again. I nearly tired everything, flashed a different firmware etc. When I've flashed a rom I get the information that no sim card was found. After I restart the device he's asking for a pin. Also tried another sim card with the same result. Really could need some help.

flash the original fimrware from ur carrier or region
flash twrp
install cm and see if works
if not,flash only the radio modem from original firmware

Already did. Didn't work. Flashed the new cm12.1 from h2o64. This one is working.

I have the exact same problem with my XT1562 I bought from Germany through Moto Maker.
I installed h2o64's CM build from 10-10 after a full wipe (everything except internal data), and never got any proper signal. I tried squid2's CM build 10-12 as well, to no avail. Installing the XT1562 EU stock firmware following the linked explanation in the stock firmwares thread I had good, working signal, but then installing h2o64's CM build 10-14 with a factory reset rather than a full wipe resulted in the same issues described in this thread again.
I've read about these issues in different threads, mostly resolved somehow by installing the stock firmware, sometimes by selecting LTE as the preferred network type. I've tried these suggestions, but haven't had any success, and I don't know how to proceed.
Did I install the right stock firmware? (I would think so as it worked while it was installed.)
Did I forget to do something (like wipe, fix permissions, reboot the phone three times, howl at the moon,...)?
I use OpenGApps rather than tkruzze's since they're available in x64 as well so I can use them on all my devices. But that surely can't be it?
I'm at a complete loss at the moment, which is rather frustrating. Can anyone provide any help?
Gesendet von meinem Nexus 9 mit Hilfe von XDA Forums Pro.

I managed to install h2o64's CM build 10-14 and getting proper signal now.
I flashed the RETASIA firmware from XMoDuLeSx's Official stock firmwares added for xt1562,xt1563 thread following the instructions linked in the first post, and then after a wipe of system, data, cache, dalvik-cache I installed [ROM][lux][5.1.1] Cyanogenmod 12.1 - 2015-10-14 [UNIFIED].
Keep in mind that I have ordered my Moto X Play from Germany, so it shouldn't require a RETASIA firmware. I'm not advising to install this, as it was nothing but a shot in the dark that surprisingly didn't brick my phone. Still, I wanted to share that I got it working after all, simply to follow up my previous post properly. Should the signal break again, I'll update this thread; if I haven't, assume that it's still working.
Either way, though: If you decide to go down this road and install a firmware that isn't right for your phone and brick it, don't come to me. I'm advising against doing this.

Seems i'm having the same issue...
I did all the wipes and clean installs but I can't connect to my carrier.
Although my phone only supports one sim card, settings shows two. The first one is the one i'm using and it is displayed correctly. The quick settings tile though tells me that there is no sim card inserted.
I came from stock, unlocked, flashed TWRP from squid2's kernel page, rooted, flashed CM(squid2), kernel(squid2) and OpenGApps.
Did I do something wrong?
Is there any news on how to fix this problem or do I have to try again and again an hope to hit the spot?

Mafaldine said:
Seems i'm having the same issue...
I did all the wipes and clean installs but I can't connect to my carrier.
Although my phone only supports one sim card, settings shows two. The first one is the one i'm using and it is displayed correctly. The quick settings tile though tells me that there is no sim card inserted.
I came from stock, unlocked, flashed TWRP from squid2's kernel page, rooted, flashed CM(squid2), kernel(squid2) and OpenGApps.
Did I do something wrong?
Is there any news on how to fix this problem or do I have to try again and again an hope to hit the spot?
Click to expand...
Click to collapse
You need two more posts before you can post this in the CM thread from squid2. Squid2 is always fast with bugfixes. So make 2 other post and then explain your problem to him.

Lennyz1988 said:
You need two more posts before you can post this in the CM thread from squid2. Squid2 is always fast with bugfixes. So make 2 other post and then explain your problem to him.
Click to expand...
Click to collapse
Thanks for your reply!
I will do that
Meanwhile I managed to get a connection to my carrier by flashing h2o64's CM build 10-14 and then squid2's on top without wiping anything...

RR Lux 5.5.8 didn't work Wifi, after 2 clean instalation, wifi turn on and off then