Database Users

Too many issues so few roms

3rd thread, about 4th rom flashed
constant issues with builds. have gone from stock to:
cm 6.1.3 -apps crashing, random crash notices i.e "phone book has crashed force close" - "the process com.android.phone has stopped unexpectedly"
cm 7 - random reboots, opening browser caused power cycle, wifi issues, lag (thread posted, no solutions at the forefront)
currently on tripnraver pre release. now another issue. no signal what so ever.
original baseband on this xperia x10a is .55. it is suggested to use with bands 52 or 49.
loading either of these basebands. which ive done. doesn't seem to fix the no signal problem. the description states should be backwards compatible even if appropriate bb is not installed on device. yet no luck.
attempting to flash either baseband fails to resolve this problem. currently trying to flash back to stock and try another full reinstall and baseband flash in flashtool.
any ideas would be a great help. having to flash x number of times between roms is getting quite time consuming
thanks everyone.

if you want to stay on the miui rom, you can flash the baseband patch located here and stay on whatever baseband works best for you (I'm on .55 and find it fantastic), then when you load the rom, go to dev tools>bad behaviour>crash the system server.
http://forum.xda-developers.com/showthread.php?t=1011608
Otherwise, I would recommend wolfbreaks cm 6.1.3, as it is the most stable. You must have done something wrong during installation as I never had an issue with his roms.

The only issue I have ever had with any rom is MiUi and thats because I used the wrong baseband. You must be doing something wrong for you to be having problems

if you want, try this flash, it's trips miui pre-final with the baseband patch implemented.
http://www.multiupload.com/KCKE9K2WKN
worked with my .54 baseband

thanks so much for the links to the baseband patches. i remember coming across a thread that posted it but unfortunately forgot to book mark. so im definitely going to go ahead and try with the patch installed. hopefully all works well
each rom ive flashed has been done properly according to instructions. cache wiped, dalvik, and full reset as per menu options in xrecovery.
one way or another i experienced lag for the most part, and as mentioned some random crashes. never had reset on wolfs rom just error messages at times. trips rom worked excellent, smooth and quick. hopefully with the patch implemented everything will work flawlessly
thanks you guys
*Updated
Flashed over rom with baseband patch. signal working. everything running smooth.
except for when using camera zoom. zoom default displays 0x. as soon as the option is selected it spawns an immediate force close
any patches? or similar outcome for anyone else?
i will outline my steps below so everyones up to speed on how i performed this flash.
- flashed back stock in SEUS
- root with one click (success)
- installed busy box (market)
- installed xrecovery apk
- booted into xrec
1. full factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
5. install custom zip from sd card
6. selected trips rom with bb patch implemented
5. reboot

Camera zoom doesn't work in most ROMs yet and the lag you were experiencing was likely just the FW "settling" it can take a little bit and a couple reboots sometimes for the phone to calibrate itself properly.
Sent from my X10i using XDA Premium App

thanks cmoney. maybe ill try my luck with cm7. give it a few reboots and hope for the best. great rom. im really loving trips iphonesque style
clean smooth and quick. everythings working great. hoping the zoom may get fixed soon enough. only other inquiry i have with regards to this rom is the apps2sd.
this feature is essential to myself personally. and it is not working as ive noticed on this rom. ive read a thread with regards to a fix for the last release. i checked the settings for an enable option in case the feature requires being manually set as active but nothing listed. within sd settings state reads as unavailable. if anyone has an answer as to whether this fix will function with the current pre release. ill be going ahead with completeling the flash and reporting what i find back on this thread.
thanks again everyone

Try Wolfbreaks rom. It's very very stable for me. It has cam and everything upto date.

im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.

thesoundofsilence said:
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
Click to expand...
Click to collapse
works for me on trips newest....

i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?

thesoundofsilence said:
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
Click to expand...
Click to collapse
I dunno man, it works fine for me, but I copied data from my 0.3.2 xrecovery image, so that might be why. try flashing that apps2sd fix for 0.3.2, should work fine

damn it. i just found that thread. found the links to the fixes. so far ive tried miui32_a2sd_fix.zip. and flashed that over with xrec prior to reboot. which did nothing.
there are two more links so im going to try those two flashes as well and hope that one of them will do the trick. if its working when utilizing .32 patches then ideally the bloody thing would have to work here. thanks for the input though dtox. much appreciated

I don't know what else to suggest man
From the feedback I see in the miui thread, everyone else is reporting it working!
Did you factory wipe, wipe cache partition, and wipe dalvik cache before install? then flash the miui 1.0.zip, and flash immediately the baseband patch then reboot into the rom.
Remember not all apps allow apps2sd so use something like android system info, go into the applications tab click on one, click manage and then see if the option "move to sd" is highlighted. Like I said check a few though, not all apps can be moved

i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox

thesoundofsilence said:
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
Click to expand...
Click to collapse
Try it again but without the fix...

i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.

thesoundofsilence said:
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
Click to expand...
Click to collapse
No idea man, like I said it is fine for everyone else so I'm so no big development will arise that will make it function with your phone....

maybe it has something to do with 10a. i dont know. but the point is it shouldn't even be doing this regardless. hypothetically if its froyo and it has apps2sd built in. it should work. its not the way ive flashed. the phone supports it. so my only conclusion the rom must not be as compatible as stated. and from reading different posts about the prev builds sometimes the patches worked at other times they didnt. and also the fact that the rom is claimed to work without the need for a bbpatch. yet without the patch instaled phone caught no single. i guess certain unexplainable glitches can be bound to happen at times but any how ill give it one last go.
if nothing comes out of that then im giving up on that build because it seems relatively hopeless.

lol I'm using an x10a...
Still man you're the only person reporting this. Don't you find that strange? What baseband are you using anyhow?

[Q] No network service GT-S7710 after installing CM10.1, 10.2 or 11

Hi peoples!
I’ve recently installed Cyanogenmod on my Samsung galaxy Xcover 2 (GT-S7710). But when I was done installing my phone couldn’t get any data (H/2G/3G) or call and receive calls. Could someone tell me what I did wrong or forgot whilst or after I installed Cyanogenmod? I would like to know because I’ve read other threads where people with a GT-S7710 do have a working network service on their phone with CM. And I also would like to know the solution to this problem because I can’t take a beating .
I apologize for the length of this first post . I just want to be totally complete about what I’ve done and tried so far to get CM to work with network service. I posted all this information to inform you all and so you could stripe a lot of questions off your list for finding the solution. Also I think this thread may be very useful for other Samsung Android users as well.
Kind regards,
Rick Willems
The problem
So the problem is that when I’ve installed CM10.1 or 10.2 or 11 to my GT-S7710, I don’t have any network service anymore. I tried to install CM using the following method: http://blog.arinium.fi/2014/07/howto-fix-samsung-xcover-2-issues-old-android-low-memory-slow-ui/. I installed CWM 6.0.4.6, wiped cache and installed CM10.2. After this it got stuck in a bootloop. Using the advice of this page: http://forum.xda-developers.com/showthread.php?t=2084905 which was to also wipe data/factory reset and wipe dalvik using CWM it worked!! YES!! But **** no service.
Used Files to install
Links I used to download CWM, CM and Gapps come from these pages:
http://forum.xda-developers.com/showthread.php?t=2384015&highlight=no+network, http://forum.xda-developers.com/showthread.php?p=43294839#post43294839,
CWM: http://www.adriadata.net/xda/skomer/
CM: http://www.adriadata.net/xda/skomer/
Gapps: https://itvends.com/gapps/
What I’ve done and tried
I tried to get network service back when I installed CM10.1 and CM11. In both cases I did a full wipe of data/factory reset, cache and dalvik then installed the latest stock rom/firmware 4.1.2 and do the instructions over again form the chosen method. I did notice that my phone does have network service when I have installed the stock rom/firmware downloaded from this link: http://www.mrcrab.net/down-firmware/14362/Samsung-Galaxy-Xcover-2-GT--S7710.html, My device also has got service when CWM 6.0.4.6. is flashed over the stock rom/firmware. Just not when I installed CM. CM10.1 was running more smoothly than CM10.2 and CM11 was running a little less smooth than CM10.2.
Attempt to solve the problem
I’ve brainstormed the following pages to get to the point of giving up .
http://forum.xda-developers.com/showpost.php?p=35600769&postcount=2
http://forum.xda-developers.com/showthread.php?t=1205439
http://forum.xda-developers.com/showthread.php?t=2448246&page=2
http://forum.xda-developers.com/showthread.php?t=1304258
http://android.stackexchange.com/questions/39076/sim-card-failed
http://forum.cyanogenmod.org/topic/63816-network-problem-with-cyanogenmod-101-1218/
http://forum.cyanogenmod.org/topic/85051-no-service-cant-calltextnetwork-after-flashing-cm11-nightly-on-i9305/
The most pages are threads for other devices, but I thought I just read it anyway, maybe I could get some useful information out of it. Some pages talk about CDMA/RUIM that you can find under network setting in settings, but I’ve not been able to find it on my GT-S7710. Other data found in these pages are also not corresponding with my device.
What I did notice and learned was that information in the EFS folder like Imei, Baseband etc. are used to find and recognize the simcard and thus enable data usage and be able to call and receive calls. So I thought why not backup a copy the EFS folder and place it in CM’s EFS folder after install, so I did. I installed stock firmware where my network service works following the same steps I took that I described earlier, backup the EFS folder to sdcard1, install CWM and CM10.1 and tried to copy the backed-up EFS folder to CM root. But no way would it replace the CM EFS folder, CM simply blocks the copied EFS folder from stock rom/firmware.
I am just out of ideas now and am requesting your aid. Please help me .

Got the same problem here,unfortunately no fix yet

Try this:
kadooosh said:
For those trying to install this or another rom and having the no signal(no smallband) problem. This worked for me on 2 xcovers.
Install cmw: http://theunlockr.com/2014/02/27/install-clockworkmod-recovery-samsung-galaxy-xcover-2-gt-s7710/
Root it: http://theunlockr.com/2014/02/27/root-samsung-galaxy-xcover-2-gt-s7710/
Now normally you can install the custom rom now(vanir). If you do you probably get no signal.
Start odin and flash this file : S7710XXAMB6_S7710OXEAMB3-20130713.tar.md5
I found it on this site: http://www.ulozto.cz/xHADj5PD/samsung-7z
If its dead you can pm me and I can send it.
After I flashed this the phone would just go in a bootloop.
Don't be afraid this is normal.
Now install the vanir rom in the cmw recover mode.
After this it should work fine.
Add a microsd card with 2 partitions and install mount2sd and you have a fully working phone with(almost) unlimited space.
I'm using if for an year now and it works great.
Better then most €500 phones which break after 1 fall .
Click to expand...
Click to collapse

With skomer it is definitely a baseband problem. Changing baseband solves the network signal.

ViktorDelta said:
With skomer it is definitely a baseband problem. Changing baseband solves the network signal.
Click to expand...
Click to collapse
because i have the same problem, i installed cm10.2 and everything were fine for a week and then no signal, i tried to install all the available firmwares out there, the closest i got was to find network and 3g i made a successfull call then i shut it off. At the next boot nothing again. My baseband is xxxx. What do i have to do to change baseband? My IMEI is correct.
does anyone have a /modemfs and /efs folder available to try or/and a modem file to flash?

Odin flash
Go to this page https://boycracked.com/2016/09/11/official-samsung-galaxy-xcover-2-gt-s7710-stock-rom/ and download stock rom labeled "oxeamb3". Put your phone on download mode and connect to odin. Flash this rom with it.
After that, flash your clockworkmod and custom rom. Vanir or CM.
If you still lose signal, try with AND2 stock rom. It's been a while since I did this so I don't remember exactly, but I think AND2 had problems with signal and AMB3 didn't.

New User - CyanogenMod Questions

Hello,
I received my Nexus 6P yesterday and got my SIM card activated without any issues at Verizon. I immediately took it home, unlocked the bootloader, installed TWRP, and then flashed CyanogenMod's latest nightly. After booting in, wireless networks weren't detected, and I only had 3G (no 4G LTE as I should). I restored my backup of the stock ROM that I made in TWRP and it hung at the Google logo. I'm not sure why. I then flashed all the latest factory restore images (MTC19X) to get it working again and determined that the issues I had in CyanogenMod might have happened due to the vendor.img I had on my phone at the time not being compatible with that build of CM13.
My questions are:
1) What are the known issues that would likely occur due to vendor.img being a different version than what CM13 was based on? The concept of vendor.img is new to me. I haven't had this, as far as I know, on any of my other phones (granted I'm coming from a locked Samsung Galaxy S5 that I've had for almost 2 years)
2) How can you easily tell which vendor.img CM was based on so you know which one to flash?
3) Is there anything else I should be made aware of before attempting to flash CM13 again?
4) While using CM13, do most people recommend a custom kernel? If so, which one and how stable is it? What are the benefits of switching from the stock kernel, and how simple is it to go back if there's a problem?
Thanks!!

dude...I just got the N6P and ran CM13 within hours. This is what I did...
unlocked the bootloader
downloaded the lastest (MTC19X) image off of https://developers.google.com/android/nexus/images and unpacked it into the C:\Program Files (x86)\Android\android-sdk\platform-tools folder
ran the flash-all.bat
fastbooted TWRP
installed CM13. (didn't wipe internal storage)
installed arm64 open Gapps pico
BAM!!!
right now running stock kernel. it's cool. I'm PrivacyGuard-ing the hell out of all my apps (turned off START AT BOOT and KEEP AWAKE for almost every downloaded app), though, so battery is OK
also using Kernel Adiutor but underclocking values for the CPUs doesn't seem to stick

So it likely worked for you since you had flashed the newest vendor.img first. Apparently there are compatibility issues with certain features that cause them not to work (such as WiFi) if you're using an older one.

chaoticyeshua said:
Hello,
I received my Nexus 6P yesterday and got my SIM card activated without any issues at Verizon. I immediately took it home, unlocked the bootloader, installed TWRP, and then flashed CyanogenMod's latest nightly. After booting in, wireless networks weren't detected, and I only had 3G (no 4G LTE as I should). I restored my backup of the stock ROM that I made in TWRP and it hung at the Google logo. I'm not sure why. I then flashed all the latest factory restore images (MTC19X) to get it working again and determined that the issues I had in CyanogenMod might have happened due to the vendor.img I had on my phone at the time not being compatible with that build of CM13.
My questions are:
1) What are the known issues that would likely occur due to vendor.img being a different version than what CM13 was based on? The concept of vendor.img is new to me. I haven't had this, as far as I know, on any of my other phones (granted I'm coming from a locked Samsung Galaxy S5 that I've had for almost 2 years)
2) How can you easily tell which vendor.img CM was based on so you know which one to flash?
3) Is there anything else I should be made aware of before attempting to flash CM13 again?
4) While using CM13, do most people recommend a custom kernel? If so, which one and how stable is it? What are the benefits of switching from the stock kernel, and how simple is it to go back if there's a problem?
Thanks!!
Click to expand...
Click to collapse
1) Depends on ROM /VENDOR, sometimes nothings happens then an error message, sometimes things doesnt work
2) Just download fresh the latest snapshot, release or nightly (they are much more stable then for a few years!) and vendor image (use these ones which are recommended!)
https://wiki.cyanogenmod.org/w/Install_CM_for_angler (there is a link for the vendor)
3) If you stay close on the tutorials, i dont know what should happen (flashing a rom is normally not critical, installing a recovery can be!)
4) Custom kernels can be great, but its not a must-have. Which kernel you should use depends on your wishes: better battery, more power etc.
Hope i could have help you a little bit!

kaufikauf said:
1) Depends on ROM /VENDOR, sometimes nothings happens then an error message, sometimes things doesnt work
2) Just download fresh the latest snapshot, release or nightly (they are much more stable then for a few years!) and vendor image (use these ones which are recommended!)
https://wiki.cyanogenmod.org/w/Install_CM_for_angler (there is a link for the vendor)
3) If you stay close on the tutorials, i dont know what should happen (flashing a rom is normally not critical, installing a recovery can be!)
4) Custom kernels can be great, but its not a must-have. Which kernel you should use depends on your wishes: better battery, more power etc.
Hope i could have help you a little bit!
Click to expand...
Click to collapse
Very much so. I appreciate it!

Has anyone encountered the constant popup of the Select Sim Card message? I'm using project fi and I am still unable to find a solution to this issue.

No Data on Verizon

So, I was using my phone at a mall. I stepped into a store and I noticed I had no more LTE. The signal was weak, so I thought it was just the building. So I got to a stronger area and restarted the phone, and still no data. I tried restarting several times and I tried selecting different APNs (I'm running 7/15 nightly of CM13). Eventually, I took the sim card out of my wife's iPhone 6S and the LTE worked fine. My sim card worked OK in here phone as well. But once I put mine back in, I have no data (not even 2g or 3g). I thought it was just my sim card, but then I can't understand why it works in my wife's iPhone 6S. Any ideas? I'm updating to the latest nightly of CM13.

ambig88 said:
So, I was using my phone at a mall. I stepped into a store and I noticed I had no more LTE. The signal was weak, so I thought it was just the building. So I got to a stronger area and restarted the phone, and still no data. I tried restarting several times and I tried selecting different APNs (I'm running 7/15 nightly of CM13). Eventually, I took the sim card out of my wife's iPhone 6S and the LTE worked fine. My sim card worked OK in here phone as well. But once I put mine back in, I have no data (not even 2g or 3g). I thought it was just my sim card, but then I can't understand why it works in my wife's iPhone 6S. Any ideas? I'm updating to the latest nightly of CM13.
Click to expand...
Click to collapse
My suggestion is to start fresh by fastboot flashing the latest 6.0.1 factory images. Verify that your mobile data/LTE are working. Then, install TWRP. I would also download a fresh copy if the CM13 ROM and verify the md5 is correct. Flash CM13 again and see if you have LTE again. If you don't have LTE after flashing CM13 again we know it is something that has changed in the ROM.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
My suggestion is to start fresh by fastboot flashing the latest 6.0.1 factory images. Verify that your mobile data/LTE are working. Then, install TWRP. I would also download a fresh copy if the CM13 ROM and verify the md5 is correct. Flash CM13 again and see if you have LTE again. If you don't have LTE after flashing CM13 again we know it is something that has changed in the ROM.
Click to expand...
Click to collapse
I think you're right. I'm going to have to do this. I got a new SIM card from Verizon and data was fine. Then once I went to work and entered into my office, which has a poor signal, I wasn't able to get data back (can still call and send/receive texts). It makes no sense as to why it won't reconnect after a reboot, but I guess this is the only option.

Yeah I agree. Fastboot flash the factory images to give yourself a fresh start. Confirm that everything is working on a fully stock build. Then root, recovery and flash. I would try a different ROM that is not CM based to see how your voice and data works. Let us know how it goes that way others in the forum who may run into this issue can read about what was performed on your device and know what to do to help themselves. Good luck.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Yeah I agree. Fastboot flash the factory images to give yourself a fresh start. Confirm that everything is working on a fully stock build. Then root, recovery and flash. I would try a different ROM that is not CM based to see how your voice and data works. Let us know how it goes that way others in the forum who may run into this issue can read about what was performed on your device and know what to do to help themselves. Good luck.
Click to expand...
Click to collapse
So I flashed the factory images back onto my phone and I got data back. I guess there is a strange bug in the latest nightly of CM13. Of course, I haven't been able to go to an area where I have poor reception. Now I have to find a ROM that offers the LiveDisplay feature CM13 offered. I like my screen to be a bit colder than what Huawei calibrates their displays to.

ambig88 said:
So I flashed the factory images back onto my phone and I got data back. I guess there is a strange bug in the latest nightly of CM13. Of course, I haven't been able to go to an area where I have poor reception. Now I have to find a ROM that offers the LiveDisplay feature CM13 offered. I like my screen to be a bit colder than what Huawei calibrates their displays to.
Click to expand...
Click to collapse
I knew there was something in the CM13 based ROM's that was causing you to lose data. Also, If you use a custom kernel like Elemental or Elite you can control the screen colors and make it how you like it. Give Pure Nexus a try. It's a super nice ROM. The dev is awesome. He does great work. Maybe give Chroma a shot. Also, you could try Resurrection Remix. It's a CM based ROM but it may not give you the data issues. It's worth a try. Lemme know what works. Good job on getting the factory images flashed and getting data back too.
Sent from my Nexus 6 using XDA-Developers mobile app

[SOLVED] WiFi Completely Broken …

Below is my original post; however, I've since solved the problem. In an effort to help others with the same problem, I've written a Guide, which should explain exactly what to do if your WiFi is suddenly "broken" due to flashing issues.
Here's the link: OnePlus 5 WiFi Fix
Many thanks to everyone who offered help, especially subaash and hallo dare, who put me in the right direction.
--------------------------------------------------------------------------------------------------------------------------------------
Greetings, everyone.
Sadly, for specific reasons unknown, my WiFi appears to be completely broken.
Over the last few days I've gone "flash happy" by trying several Oreo ROMs for my OP5. Some worked while others just froze at the boot animation.
Unfortunately, shortly after flashing the xXx-NoLimits Oreo ROM, which got me to the initial set-up screen, my WiFi would not connect. So, I then bypassed the WiFi part and finished the set-up. Everything seemed to be working very well, but I could not get WiFi to work.
Yes, I could engage the Wifi slider to the ON position, and there would be a list of SSIDs; however, oftentimes even my 2 SSIDs would not display. When they did, and I tried to connect, I would see the connection attempt, but it would not complete the connection. Only the word "saved" would be shown under the SSID name. Then it would automatically try to reconnect, but without success.
I've tried virtually everything I can think of to solve the problem, but I can't connect to WiFi.
All other communications work, i.e., Bluetooth, Data, making and receiving calls. It's ONLY the Wifi that's not working.
Yes, I completely wiped my device and re-installed the original OxygenOS (4.5.14), but that didn't work. I also tried completely wiping the device and then installing that latest OxygenOS v4.5.15, but that didn't solve the problem, either.
I went back and flashed all the previous custom ROMs in an attempt to see if any of them would work, but nothing. I tried NitrogenOS, HalogenOS, Liquid Remix, xXx NoLimits, and they all could not connect to WiFi.
I even tried a few WiFi Fix apps on Google Play, but they didn't work, either.
Oh, yes … I even checked my router. It's perfectly fine. I can get WiFi on my laptop without a problem. Furthermore, when I went to a local coffee shop this morning that provides free WiFi, my phone could not connect, just like at home.
Does anyone have ANY suggestions?
Thank you,
Peter

I would say this is to do with your firmware/modem.
I did have this issue on a non Oreo ROM and in the end I just did a dirty flash and it worked.

dladz said:
I would say this is to do with your firmware/modem.
I did have this issue on a non Oreo ROM and in the end I just did a dirty flash and it worked.
Click to expand...
Click to collapse
I've tried flashing both the 4.5.14 and 4.5.15 firmware, with no luck; however, I accidentally deleted my modem nandroid about a week ago.
Do you know where I might find a flashable modem file?
Thanks,
Peter
Addendum: I found the following site for Firmware & Modems:
https://www.jamal2367.com/?dir=OnePlus 5/Firmware + Modems/Android 7.1.1/OxygenOS
I'll try flashing them and report back.
Addendum 2: NOPE! Didn't work. I flashed a few different firmware & modems, 4.5.13, 4.5.14 and 4.5.15, but WiFi is still broken. Yes, I first flashed the appropriate OS version before flashing the firmware and modem. In other words, I always matched the OS version with the firmware & modem version, but no success. Everything works except WiFi. Hmm, still stumped.

PeterGuru said:
I've tried flashing both the 4.5.14 and 4.5.15 firmware, with no luck; however, I accidentally deleted my modem nandroid about a week ago.
Do you know where I might find a flashable modem file?
Thanks,
Peter
Addendum: I found the following site for Firmware & Modems:
https://www.jamal2367.com/?dir=OnePlus 5/Firmware + Modems/Android 7.1.1/OxygenOS
I'll try flashing them and report back.
Click to expand...
Click to collapse
Careful with modems mate. There's a thread here on XDA containing modems and firmwares..just make sure you get the right one.

dladz said:
Careful with modems mate. There's a thread here on XDA containing modems and firmwares..just make sure you get the right one.
Click to expand...
Click to collapse
Thanks! I'm quite aware of the need for caution with modems. Sadly, though, it didn't solve the problem.

yea my freind in idia s 1p5 was flasing anything and his oneplus 5 got weird but turns out ok googles cousin hey google had a hangover, i cleared her cache and threatened her with king root & she slowed her role, i asked her why her cousins voice is so shot out,she said ok google has a hi and low voice cuz she burnt out but now ok google took my vpn and dipped to inda for some oneplus christmas party. what ever just watch out for hey google, cuz if you got volte 5g and a vpn they b will go offline and dipp with your vpn to india. i guess india likes oneplus. hold up this is the be delighted thread?

Did you get this sorted, having the very same issue

hallo dare said:
Did you get this sorted, having the very same issue
Click to expand...
Click to collapse
Sadly, no. I've tried absolutely everything I can think of, all without success. It's very frustrating because absolutely everything else works, except WiFi.
All I can do now is wait for suggestions from others, or take the phone to a repair shop (which I'm hesitant to do).
Peter

Thanks for replying. If you happen to get it sorted, please let me know. I will do likewise if I manage to fix it. Thanks

Try reflashing the rom. Not sure why, but that happened to me and reflashing the rom fixed it.

ab7casper said:
Try reflashing the rom. Not sure why, but that happened to me and reflashing the rom fixed it.
Click to expand...
Click to collapse
Done that already, tried old roms of OOS and Oreo, but still no joy. Heads wrecked with it.

hallo dare said:
Done that already, tried old roms of OOS and Oreo, but still no joy. Heads wrecked with it.
Click to expand...
Click to collapse
Do you have a full rom backup? I mean of the last working rom you had before all the flashing? If so, from a full stock rom (1.53gb or close) of the same build as the backup (ie... 4.5.14) wipe and flash that rom, then wipe and restore the backup you have if the last working rom. If they doesn't work I think you're likely looking at a hardware issue.

Eric214 said:
Do you have a full rom backup? I mean of the last working rom you had before all the flashing? If so, from a full stock rom (1.53gb or close) of the same build as the backup (ie... 4.5.14) wipe and flash that rom, then wipe and restore the backup you have if the last working rom. If they doesn't work I think you're likely looking at a hardware issue.
Click to expand...
Click to collapse
Thanks, i'll give that a go
---------- Post added at 07:36 PM ---------- Previous post was at 07:02 PM ----------
Eric214 said:
Do you have a full rom backup? I mean of the last working rom you had before all the flashing? If so, from a full stock rom (1.53gb or close) of the same build as the backup (ie... 4.5.14) wipe and flash that rom, then wipe and restore the backup you have if the last working rom. If they doesn't work I think you're likely looking at a hardware issue.
Click to expand...
Click to collapse
Ok I done that, and now, wifi is still doing the same thing and under the network i pick it just goes to saved and then says disabled under it.

hallo dare said:
Thanks, i'll give that a go
---------- Post added at 07:36 PM ---------- Previous post was at 07:02 PM ----------
Ok I done that, and now, wifi is still doing the same thing and under the network i pick it just goes to saved and then says disabled under it.
Click to expand...
Click to collapse
Same problem but only on my 5GHz network and dont know how to fix

PeterGuru said:
Greetings, everyone.
Sadly, for specific reasons unknown, my WiFi appears to be completely broken.
Over the last few days I've gone "flash happy" by trying several Oreo ROMs for my OP5. Some worked while others just froze at the boot animation.
Unfortunately, shortly after flashing the xXx-NoLimits Oreo ROM, which got me to the initial set-up screen, my WiFi would not connect. So, I then bypassed the WiFi part and finished the set-up. Everything seemed to be working very well, but I could not get WiFi to work.
Yes, I could engage the Wifi slider to the ON position, and there would be a list of SSIDs; however, oftentimes even my 2 SSIDs would not display. When they did, and I tried to connect, I would see the connection attempt, but it would not complete the connection. Only the word "saved" would be shown under the SSID name. Then it would automatically try to reconnect, but without success.
I've tried virtually everything I can think of to solve the problem, but I can't connect to WiFi.
All other communications work, i.e., Bluetooth, Data, making and receiving calls. It's ONLY the Wifi that's not working.
Yes, I completely wiped my device and re-installed the original OxygenOS (4.5.14), but that didn't work. I also tried completely wiping the device and then installing that latest OxygenOS v4.5.15, but that didn't solve the problem, either.
I went back and flashed all the previous custom ROMs in an attempt to see if any of them would work, but nothing. I tried NitrogenOS, HalogenOS, Liquid Remix, xXx NoLimits, and they all could not connect to WiFi.
I even tried a few WiFi Fix apps on Google Play, but they didn't work, either.
Oh, yes … I even checked my router. It's perfectly fine. I can get WiFi on my laptop without a problem. Furthermore, when I went to a local coffee shop this morning that provides free WiFi, my phone could not connect, just like at home.
Does anyone have ANY suggestions?
Thank you,
Peter
Click to expand...
Click to collapse
So first of all the reason why it is broken is because of the oreo firmware that you flashed earlier. Now what you should do is flash stock recovery and flash the oreo build and boot it up and running. Once you've done that flash the rollback rom (which suppose to downgrade your oreo firmware to nougat firmware). Once you've done it basically it fixes you're wifi issue.

PeterGuru said:
Thanks! I'm quite aware of the need for caution with modems. Sadly, though, it didn't solve the problem.
Click to expand...
Click to collapse
There's a button for that son..
Also the firmware / modem will be the problem, either upgrading or rolling back..either way it'll be the cause.

ab7casper said:
Try reflashing the rom. Not sure why, but that happened to me and reflashing the rom fixed it.
Click to expand...
Click to collapse
Eric214 said:
Do you have a full rom backup? I mean of the last working rom you had before all the flashing? If so, from a full stock rom (1.53gb or close) of the same build as the backup (ie... 4.5.14) wipe and flash that rom, then wipe and restore the backup you have if the last working rom. If they doesn't work I think you're likely looking at a hardware issue.
Click to expand...
Click to collapse
Dimontiman said:
Same problem but only on my 5GHz network and dont know how to fix
Click to expand...
Click to collapse
Okay, let me first answer a couple of questions. Like I said in my first post, I DID flash the original ROM, as well as other OEM OxygenOS ROMs, all without success. Yes, I used the exact same ROM that was working perfectly before the problem. Yes, I also had a FULL Nandroid of the working system, but restoring that also did nothing to solve the problem.
Okay, with that out of the way, I went to a repair shop this morning to try and solve the problem. It was unsuccessful. The technician said it's unlikely to be hardware related because I can still get the phone to recognize all local SSIDs. I simply can't connect to any of them. Just like hallo dare said in his post a few back, when I try to connect to my SSID, it tries to connect for a second or two, and then it just shows "saved" and wifi is disabled.
So, for now I'm still completely stumped.
Peter

subaash said:
So first of all the reason why it is broken is because of the oreo firmware that you flashed earlier. Now what you should do is flash stock recovery and flash the oreo build and boot it up and running. Once you've done that flash the rollback rom (which suppose to downgrade your oreo firmware to nougat firmware). Once you've done it basically it fixes you're wifi issue.
Click to expand...
Click to collapse
dladz said:
There's a button for that son..
Also the firmware / modem will be the problem, either upgrading or rolling back..either way it'll be the cause.
Click to expand...
Click to collapse
Okay, I will do exactly what subaash said and report back. I, too, agree that it's probably software related, which is why I'm actively attacking this issue.
Be back as soon as I can.
Peter
P.S. "Son?" Hmm, I have a sneaking suspicion that I'm older than you (will be 60 in March).

Success ... maybe?
Well, well. It appears the previous suggestions were correct. So far it's successful, but I haven't quite finished the initial set-up. All I can say is that WiFi is working, and I'm grateful for that.
However, it was a frightening ordeal. At one point I thought my device was bricked, and I didn't know what to do. However, with some thought, I was able to solve the problem.
Good news, though, is that I DID NOT have to revert back to Nougat. I'm now running Oxygen Oreo 8.0.0 Open Beta 2.
I will provide a detailed instructions of what I did a bit later. I simply want to get everything up-and-running, which could take a few hours.
Here's an abbreviated version:
Downloaded Oxygen Oreo 8.0.0 Open Beta 1 from here:
http://downloads.oneplus.net/oneplus-5/oneplus_5_oxygenos_openbeta_1/
Downloaded Stock Recovery from Post #2 here:
https://forum.xda-developers.com/oneplus-5/how-to/official-oxygenos-4-5-2-7-1-1-ota-t3627003
Copied both files above to root of device internal storage
Reboot into TWRP recovery
Flashed stock recovery in TWRP
Reboot into stock recovery
COMPLETELY Wiped the entire system ... absolutely everything ... including internal storage. This is where I had the initial problem. I did not wipe everything, including internal storage, and I ended up with a mixture of jumbled numbers and letters when looking at the file structure.
Using ADB Sideload within the stock recovery, I "moved/flashed" the ROM ZIP to the device
After successful sideload, I said yes to installing the ROM
The ROM then installed and, voila, I'm at the initial set-up screen.
Okay, that's all for now. I'll be back later.
Peter

Format data resolves the problem (at least with me...)