Database Users

[ROOT] Enable Charging LED

@StephenMilone made this great app for the Moto X that enables the "secret" charging/notification light. I've tested it on my Maxx, and it worked perfectly. This mod is still in the early stages of development, but works great. Check it out! http://forum.xda-developers.com/showthread.php?t=2602689

kuz142 said:
@StephenMilone made this great app for the Moto X that enables the "secret" charging/notification light. I've tested it on my Maxx, and it worked perfectly. This mod is still in the early stages of development, but works great. Check it out! http://forum.xda-developers.com/showthread.php?t=2602689
Click to expand...
Click to collapse
Can you please post a picture of this in action?
I've seen the post and the picture with the Moto X LED on behind the earpiece speaker. However, it was said that that LED's original function was to signal charging when the battery was too low to power the screen. I've had my Maxx charging when it was completely drained and there was no LED. I don't have my Maxx rooted so there's no way for me to see what this looks like myself. I'd appreciate seeing what it looks like since, even with active notifications, I get nostalgic for that notification LED from my RAZR HD Maxx.
Thanks

swboland said:
Can you please post a picture of this in action?
I've seen the post and the picture with the Moto X LED on behind the earpiece speaker. However, it was said that that LED's original function was to signal charging when the battery was too low to power the screen. I've had my Maxx charging when it was completely drained and there was no LED. I don't have my Maxx rooted so there's no way for me to see what this looks like myself. I'd appreciate seeing what it looks like since, even with active notifications, I get nostalgic for that notification LED from my RAZR HD Maxx.
Thanks
Click to expand...
Click to collapse
Unfortunately, the light on the Maxx looks pretty terrible, nothing like the nice one on the Moto X that's reminiscent of the Razr HD :/ Anyway, here's a picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

any chance for non-root users?

how i can active led notification in my ultra ?

lawmangrant said:
any chance for non-root users?
Click to expand...
Click to collapse
Nope sorry

fire159 said:
how i can active led notification in my ultra ?
Click to expand...
Click to collapse
You have to be rooted, then download the app linked in the OP and set your desired settings there

It does work!
I have a few apologies to make. I didn't think it was true!
Having some issues disabling though.
Sent from my Nexus 7 using Tapatalk

jfriend33 said:
It does work!
I have a few apologies to make. I didn't think it was true!
Having some issues disabling though.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
=)
Just run the command "none" and it'll turn off - or reboot with the "apply on boot" option turned off. The setting is not saved on reboot by the OS.

Nice! Nothing beats an extra feature!
Thank you
Sent from my XT1080m using Tapatalk

Droid Maxx, Droid Ultra, Droid Mini XT1080 Disassembly Video

I put together a video for those who wanted to know how to take apart the Droid Mini, Ultra or Maxx.
http://www.youtube.com/watch?v=HJ0989c6TXI&feature=youtu.be

pwrdbykyank said:
I put together a video for those who wanted to know how to take apart the Droid Mini, Ultra or Maxx.
http://www.youtube.com/watch?v=HJ0989c6TXI&feature=youtu.be
Click to expand...
Click to collapse
Friend..would/could you post a link for download.?
sent by my MZ617-32 XYBoard 10.1_SafeStrap v3.12_Jelly Bean 4.1.2
Please donate to: jcase & Hashcode (if you can)

NWKENT said:
Friend..would/could you post a link for download.?
sent by my MZ617-32 XYBoard 10.1_SafeStrap v3.12_Jelly Bean 4.1.2
Please donate to: jcase & Hashcode (if you can)
Click to expand...
Click to collapse
Hi, its a really big file, would take too long to upload to a server to download from, plus I don't really want the video to be distributed online If you need to view it you can always just go to the youtube link I posted and watch it there.

pwrdbykyank said:
Hi, its a really big file, would take too long to upload to a server to download from, plus I don't really want the video to be distributed online If you need to view it you can always just go to the youtube link I posted and watch it there.
Click to expand...
Click to collapse
The video you posted is for the RAZR not the new droid line. Are you saying they are the same to disassemble.

bigv5150 said:
The video you posted is for the RAZR not the new droid line. Are you saying they are the same to disassemble.
Click to expand...
Click to collapse
Lol no it is not for the old razr, you need to look again. Its a Droid Maxx XT1080 the newest one out.

pwrdbykyank said:
Lol no it is not for the old razr, you need to look again. Its a Droid Maxx XT1080 the newest one out.
Click to expand...
Click to collapse
That is weird and not the first time I have hit a link on you tube and got a different video. You are right that is the maxx funny thing is first time I hit the link it went to a RAZR disassemble video.

Please help identify the WIFI chip location on Droid Maxx XT1080M
Hello,
Could someone help identify which EMI shield covers the WIFI chip on the Motorola Droid Maxx XT1080M board, as seen in the following picture? I need to fix an intermittent WIFI problem (WIFI cannot be enabled.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you very much,
Eric

Moto Maxx recommended Qi charging pads?

I believe Moto Maxx does support Qi but I can't get it to work with my nexus 5 Qi charger. Can anyone recommend a good Qi pad that works well with Moto Maxx?

bdb4269 said:
I believe Moto Maxx does support Qi but I can't get it to work with my nexus 5 Qi charger. Can anyone recommend a good Qi pad that works well with Moto Maxx?
Click to expand...
Click to collapse
http://www.amazon.com/gp/aw/d/B00F1SHFJA
Here's what I use. It's small, looks good, and works well even through a case. I have a droid turbo but I'm 99.999% sure that the hardware is the same

Perfect - thanks! I went ahead and ordered one. (I am still curious what everyone else uses if you want to post)

You can use your Nexus 5 charger, it's just harder to hit the "sweet" spot.
To use a single coil charger, you have to place the bottom third of the Moto Maxx on the middle the Qi pad. For some reason, Motorola placed the Qi receiver near the bottom part of the phone.
Our two Nexus 5 phones were easier to place. Middle of the Nexus 5 on middle of the pad. Done.
I've used my Nexus 5 charging pads with my Moto Maxx, but it's not easy. (I own several.)
So I found a solution! I've just bought two "3-coil" chargers, and it doesn't matter where the phone is placed. Instead of one coil in the charging pad, there are THREE coils -- placed all over. The Moto Maxx will connect to the Qi pad instantly!
Check them out on Amazon. I really like the tilted one...
Itian Mikobox A6 Three Coils Black QI Standard Wireless Charger
http://www.amazon.com/gp/product/B00LE6X5VU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHOE Stadium Qi Wireless Charger 3-Coils
http://www.amazon.com/gp/product/B00JA7HNZO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

I'm using the Nokia pillow fatboy DT-901 that came with the Employee Edition bundle of the HTC Droid DNA

TYLT VU is great
Sent from my Droid Turbo using Tapatalk

soak test

I'm experiencing "Android is starting..." & "Optimizing app" @ 2014 Moto X 2nd Gen - Android Enthusiasts Stack Exchange issue, and I hope that, this soak test will address that)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

23.16.5 looks to be a moto e 2nd gen firmware update

adm1jtg said:
23.16.5 looks to be a moto e 2nd gen firmware update
Click to expand...
Click to collapse
I don't know, mine clearly states "Moto X (2nd Gen)"

good thing is Stagefright Detector is saying Not Vulnerable)

5.1.1?

Big ZD said:
5.1.1?
Click to expand...
Click to collapse
5.1
Sent from my XT1096 using Tapatalk

a1exus said:
5.1
Sent from my XT1096 using Tapatalk
Click to expand...
Click to collapse
so just a stagefright patch then? that would explain why the numbers are the same on moto e

But that doesn't explain what has taken Moto so damn long (tell me again why I still don't own a nexus - oh that's right, i'm a sucker).

Big ZD said:
But that doesn't explain what has taken Moto so damn long (tell me again why I still don't own a nexus - oh that's right, i'm a sucker).
Click to expand...
Click to collapse
If I'd known my 2013 N7 was going to take a dump a month and a half after I bought my Moto X Pure I probably actually would have ended up with the N6 instead

Looks like Android 5.1.1 update having more themes and bug fixes according to this link: http://www.latinospost.com/articles...id-5-1-lollipop-coming-moto-g-x-e-release.htm
Sent from my XT1092 using Tapatalk

a1exus said:
I'm experiencing "Android is starting..." & "Optimizing app" @ 2014 Moto X 2nd Gen - Android Enthusiasts Stack Exchange issue, and I hope that, this soak test will address that)
Click to expand...
Click to collapse
update did _NOT_ resolve my issue(

FM radio on the Quark - Moto Maxx/Moto Turbo/Droid Turbo

See this post over in the Droid Turbo forum. Someone with the Quark Droid Turbo XT1254 claims he's enabled the FM radio using Motorola factory software you can download here on XDA.
He said he did this over a year ago before the Droid Turbo bootloader was unlocked.
http://forum.xda-developers.com/showpost.php?p=66622003&postcount=16
riplayne said:
I've found one claim online of a guy using radiocomm to enable FM on the turbo. Tried emailing him, but I got no response.
I'm too scared to go messing around in radiocomm myself.
The claim is on this page
http://forums.radioreference.com/ne...phone-mobile-manufacturers-denying-users.html
Click to expand...
Click to collapse
Interesting! This guy CapStar362 posted this on April 28, 2015 -- a year ago, well before the Droid Turbo bootloader was unlocked.
http://forums.radioreference.com/ne...phone-mobile-manufacturers-denying-users.html
CapStar362 said:
my phone is the DROID Turbo, and i happen to have a copy of RadioCOMM, the motorola tool that adjusts the feature flags for the hardware controls. FM is enabled on mine and i am the one who enabled it
i get any FM Station with a app pulling right from the phone
Click to expand...
Click to collapse
CapStar362 said:
yes, when you launch it it throws you the usual "Internal Motorola Use Only" warnings.
RadioComm v11.11.11 - XDA Forums
QDP, its standard 88-108 for regular Entertainment FM Radios only. no scanner capability
The attached image is the RadioCOMM program. displayed is the CDMA Tools, which controls how the phone talks to the CDMA Towers.
you can just see at the bottom left, PST_USB and XT1254. that is the model number for my DROID Turbo and the USB mode its using to communicate with the hardware itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse

Did you test it ?
Sent from my Moto MAXX using XDA-Developers mobile app

siberian85 said:
Did you test it ?
Sent from my Moto MAXX using XDA-Developers mobile app
Click to expand...
Click to collapse
Not yet. Maybe when I get through with my work week.

i tried to use the radioCOMM, but without the ID or any other data about the FM Radio the probability to brick is near to 100%.
If you have any data to enable FM i offer to try.
Regards

Chazz any news on this ?
Sent from my Moto MAXX using XDA-Developers mobile app

Hey guys - This won't magically enable anything for you but check out Cloudplayer by DoubleTwist. It has local radio stations baked into a very slick material design app. Quality from my quick tests was fantastic. Even has the station's logo displayed.
Also allows you to chromecast local audio files with no delay (I've found nothing else that does this!).

I couldn't get the software to see my phone. I tried every trick in the book. I think my win10 x64 machine is just too new.