[Q] D800 Intermittent "Static" Screen - G2 Q&A, Help & Troubleshooting

I've got an issue with my D800 that I'd like some confirmation on. Since this afternoon, it's intermittently had a static filled screen. I've found that if I tap it a few times, it comes back to a normal screen. A few times, the screen has come up off center from what it normally is.
The digitizer looks to work 100% of the time. I'm confident that this is a hardware issue in that, if I reboot the phone, I have that static all the way through, from where the boot logo should be to my home screen.
My question is this: Is it the LCD or just the ribbon connecting the screen to the mainboard? My personal feeling is that if it were the screen, then it wouldn't intermittently come back. Also, reseating the ribbon is cheaper than replacing the LCD.
Any thoughts from those that have had this happen to them before?

Hello praetorzero,
Can you describe more about your "static" screen?
Do you mean like a noisy screen like old television displays?
Do you mean that one image like home stays the whole time on your screen?
By these both things you can try to reseat the ribbon but watchout that you don't move the ribbon too much because it can get bad.
It's true that it's an hardware issue. If you have warranty you can RMA it to let it be repaired. If you don't have warranty and the ribbon reseating doesn't work then you maybe can buy a LCD+Digitizer for like 80 euro or you might just sell your phone :/.

wulsic said:
Hello praetorzero,
Can you describe more about your "static" screen?
Do you mean like a noisy screen like old television displays?
Do you mean that one image like home stays the whole time on your screen?
By these both things you can try to reseat the ribbon but watchout that you don't move the ribbon too much because it can get bad.
It's true that it's an hardware issue. If you have warranty you can RMA it to let it be repaired. If you don't have warranty and the ribbon reseating doesn't work then you maybe can buy a LCD+Digitizer for like 80 euro or you might just sell your phone :/.
Click to expand...
Click to collapse
I can't post links yet, but let's try this anyway:: i.imgur.com/tPFHxJb.jpg
This isn't my picture, but this is exactly what my screen looks like when it's not working. If I rap the lower portion of the screen with my knuckle, it will either go back to completely normal or go off-center with the lower half of my homescreen represented at the top of the screen and the lower half static. Again, the digitizer works in the expected location, because I can still unlock the phone with my typical swipe.
Unfortunately, I bought this off of eBay, so there is no warranty. I'm on my own.

Related

SOS - Hermes works fine just that there is NO screen!

Really need help here,
My hermes suddenly decided that visuals are no longer needed.
That means the screens stays off all the time (yes even in bootloader mode).
It works, receive calls and flashes roms but in no situation can I see anything on the screen (pitch black screen).
I've got no warranty so I took it apart and checked each cable and connector - no issues were seen. I tried changing SPL-s, RUU, Roms all worked but left my tytn with that black screen.
Did anyone see this happen or has any advice?
This sucks big time :-(
No one? Oh man, I guess it's dead then :-(
Last bump before giving up and throwing it away - please?
send it to me if your gonna throw it away : - 0
I've given up on mine as well. It has white screen though. Where do I dump this thing?
If it is out of warrenty, I would take it apart as is sounds like the hardware, check the connections to the LCD. Does the backlight still work, or if you put it in strong sunlight, can you see the LCD working?
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
what are you guys willing to sell your pdas for? Mine fell in a puddle and i need one for parts. The white screen might be fixable the first couple of times but then it dies off for good, the black screen i've never heard of.
So if you want to sell for a reasonably cheap price let me know, i can buy a new keypad online for $50. So around there would be nice!
i.a.wright said:
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
Click to expand...
Click to collapse
I just tested this on mine and actually got some results.
mines the opposite though, it will NOT work with any pressure. I left all the screws loose for that board under the buttons, and left the LCD assemble screws out on that end and it works, But if I press the keys it whites out again and won't come back until I repeat the dis-assemble/re-assemble
I had a similar problem but this was after someone dropped mine on the floor. The screen would just be white screen, while everything worked. If I pressed the bottom right of the phone it would sometimes come on and stay on for a little while but would eventually always go to white screen.
I did manage to use the phone but had use a program called Net Control which allowed me to control the phone over WIFI with the phone screen shown on the PC. Got the phone replaced in the end by the people who dropped it.
i got the flex cable and my phone still has the white screen problem....wtf///

Problem with Shadow screen while sliding

Hey everyone,
Today after unplugging my Shadow, I slid the screen up (duh) to check my text inbox. Right as I pushed the screen up (only 1/4"-1/2" up from closed), the screen contrast decreased dramatically. I have been messing with this all day and it only happens within about a 1/2" area almost immediately above closed, but will move slightly up or down depending on how quickly the screen is slid in either direction. With the keypad completely out, this will completely go away, but several times now has remained low contrast with the keypad closed and the screen locked (screen lock has absolutely no effect to it). I have restarted and the phone still does this during boot-up. Anyone have any ideas? I'm really not looking forward to paying the $110 insurance claim fee for a 9-month old phone
try a hard reset. if not. buy a 60 dollar brand new unlocked shadow off ebay
same thing happend to me
Hey, i know exactly what you are talkin about, i had the same thing happen to my shadow. It turns out the the ribbon that connects from the wheel board(where the wheel is at) to the LCD cracks/breaks on the right side, and the part that sucks it only one or two lil lines that break and berely notice because t-mobile wouldn't take my phone through warranty and i didn't have insurance so i decided to take it apart myself, i ended up buying a shadow with a broken lcd and just replace the wheel board with the ribbon.

White screen all the time. What should I buy?

Hello,
for first I've already read some topic covering the white screen problem. I have the white screen every time on my Hermes since booted. Going into bootloader also shows white screen. I don't see any signs of misalignment.
I've already taken apart my Hermes and reconnected all connectors I've seen, including D-Pad connector, tightening and loosening the screws by it. I see there's nothing else I can fix without replacing any parts (or am I wrong?) What should I buy? Do you think that the actual screen may be faulty? Or maybe the flex is damaged and I should buy it? (well I think that some chip is connected to flex so I don't know if it can be replaced anyway). My main question is: if the screen is all white, is it possible that the actual screen be faulty?
It could be a number of things which could amount to $$$$ by throwing parts at the phone - may be cheaper to just buy another. Before the completely all white screen did you have occasional white screens with increasing frequency? First try some of the fixes for correcting whitescreens - pressure on the dpad - etc. If you still get nothing the chip could have come loose - but who knows?!!!! Need some more information - history etc.
Unfortunately don't know the history... bought cheap off ebay hoping it can be easily fixed already ordered the screen, if no luck, will send as spares/repair in my country - should earn something anyway.
i have a fault with mine some times (well a lot now) when i open it or close it all the way i get a funny fuzzing on the screen and some times it just ends up going black, move it back and forth a bit and the screen collour is inverted. i have to press the power button twice once for off then back on and it stays normal collours till u move the screen again. is this called white screen?
Not really - yours should be an easy fix. Seems like the flex cable is either loose or cracked slightly. It only occurs when you slide the keyboard out right? Any problems with the front keypad - with the unit closed?

HTC HD2 dropped, Black Screen, but touch and whole phone works well

Hi
I've dropped my HD2. Everything is working, including touch screen, I can unlock the phone, I can answer the call, but screen is black, not broken.
What should I do? Does the lcd screen replacement will be sufficient? In that case, could the screen be ok, but some other display "processor" could be dead? I'm asking because I'll try to this on my own.
Could simply be the lcd cable has slipped slightly but probably more likely an LCD replacement needed.
You need remove rear housing & have a look & make a decision from your findings/testing.
hello
I've got a little update - lcd screen is working well - I mean it displays the image, the only malfunction is backlit. Right now when i use flashlign I can actually see whats on screen. Do you have experience or think that backlit connection can be repaired? Do You have any schematics for hd2' lcd ?
I suspect new LCD required by sounds of it. LCD can not be stripped for repair so after basic inspection of external connection replacement is only solution & not expensive due to falling cost of HD2 parts.

Need Help-Backlight only after new LCD Screen on G530

I have a G530, the Tmobile version, though fully unlocked, rooted, etc. I had cracked the digitizer and while waiting for a new one I dropped it again and the LCD popped out with the digitizer, disconnecting itself and would come back on after that. I got a new LCD and attached it to the board (disassembled) and all worked. I mounted the board back in the case and reattached everything but then only the backlight would turn on during initial boot. The connection seemed loose and after 2-3 reconnects I got my display to work, but while attaching the digitzer, the glass at the very top, just before the lcd starts broke... So I got ANOTHER lcd and digitizer (They're cheap) This LCD only gives the backlight at initial power on, with no display response, but no matter what I do, I can't get it to kick on like the last one.
I'm trying to get an idea if it is the new LCD, or if my connector on the board is broken, It looks like maybe a bit of plastic at the top broke off.. and is making the connector a bit loose. Since I get a backlight, anyone have any experience as to which is more likely broken? I'm not sure if power from the connector goes straight to the backlight, or if it goes to the LCD first, and if I would get a backlight with a bad LCD. These are cheap $25 LCD & Digitizer bundles from Amazon, like 'Mencia' brand so good chance I could have gotten a new one that is dead.
I'll try to get another up close shot of the connector, this magnifying app didn't focus in as well and you cant see the individual connectors as well, but they are fine, its the very top part of the connector looks a bit smaller. The bottom part has a piece of metal sandwiched between the plastic, but the top doesn't have a bit of plastic after the metal tab, of course, it could be absolutely nothing :s

Categories

Resources