hi friend I try to install recovery clockworkmod fail install so Hang on Android logo only
the phone is a brick only android logo not downloading mode ... usb jig is work in zte ???? flash tools pls help
Related
hello friends I have a problem and I hope I help
I have the original 612G l5 lg movistar, but released for telcel
install "Rom" of Russians to install recovery
install "MIUI" but wanted to go back to the "stock rom"
but stay in brick in the logo "LG"
try "LG PC SUITE" gains access to the loading screen "MOVISTAR" but gets stuck
I can NOT do hard reset
I hope I can help
sorry for my bad english
Can you go to download mode? If you can you can flash a special kdz for downgrade, after that you can flash any kdz you want
http://forum.xda-developers.com/showpost.php?p=39606536&postcount=333
try this
remove battery/sim/sd
while pressing vol- connect your phone to the pc throught the cable.
you'll boot into emergency mode
hello guys,im new here i need your help..
I bricked my d802 today,i was on stock kitkat rom,what i did was rooted my device with towel root and used Autorec to install recovery,it installed successfully,then i clicked ''go to recovery'' then all i get were white lines on one side of screen and rest of screen is black(cant see anything).. after digging for hours i came to know that it is because of different Kernel version,but now i want to know how can i flash patched Kernel? as my device is bricked.. It is also not going into download mode so i cant also flash a stock rom.. tried Adb but it is not detecting my device... im completely lost
A tutorial or help will be appreciated.Thanks im waiting for your replies
EDIT:
i used fastboot commands n flashed some img. files..now my display shows up(dull white lines are still on it)..i can boot into download mode now..i flashed kdz stock rom it completed successfully.. but after reboot it is stuck on lg logo with led on... i did hard factory reset(holding volume down key + power button) but it is still stuck at lg logo.. i can still boot into download mode and i dont have a custom recovery installed what should i do now?
can i flash custom recovery using fastboot command? because ADB is not detecting my device. but computer is detecting my device(it also installed three drivers automatically)
And i flashed D80220a_00.kdz stock rom Indian version..should i try some other KDZ aswell? reply please thanks
have a similar issue with my d805. stuck in boot logo and download mode doesnt do anything to help me. someone please help
guys i really need your help,please guide me
kenennaoyeka said:
have a similar issue with my d805. stuck in boot logo and download mode doesnt do anything to help me. someone please help
Click to expand...
Click to collapse
any luck?
none bro....i sent my phone in to an XDA Super Contributor in the LG G2 section. He was in California. Try to find someone to help you around your city or country. Sorry man. If he gets it done, i would ask him how he went about it and let you know.
ahmeee123 said:
any luck?
Click to expand...
Click to collapse
okay,i figured out my problem i have d800(i removed back cover to check) while i was flashing kdz n tot. of d802,now my screen is messed up,no download mode,no recovery and no fastboot,it just stuck at lg logo with led flashing,my pc detect it as Lg androidnet phone.. what can i do now? anybody help thanks
same issue
ahmeee123 said:
hello guys,im new here i need your help..
I bricked my d802 today,i was on stock kitkat rom,what i did was rooted my device with towel root and used Autorec to install recovery,it installed successfully,then i clicked ''go to recovery'' then all i get were white lines on one side of screen and rest of screen is black(cant see anything).. after digging for hours i came to know that it is because of different Kernel version,but now i want to know how can i flash patched Kernel? as my device is bricked.. It is also not going into download mode so i cant also flash a stock rom.. tried Adb but it is not detecting my device... im completely lost
A tutorial or help will be appreciated.Thanks im waiting for your replies
EDIT:
i used fastboot commands n flashed some img. files..now my display shows up(dull white lines are still on it)..i can boot into download mode now..i flashed kdz stock rom it completed successfully.. but after reboot it is stuck on lg logo with led on... i did hard factory reset(holding volume down key + power button) but it is still stuck at lg logo.. i can still boot into download mode and i dont have a custom recovery installed what should i do now?
can i flash custom recovery using fastboot command? because ADB is not detecting my device. but computer is detecting my device(it also installed three drivers automatically)
And i flashed D80220a_00.kdz stock rom Indian version..should i try some other KDZ aswell? reply please thanks
Click to expand...
Click to collapse
Hello
I have bought my Lg g2 d802 few days ago and when I tried to root it and install recovery using autorec the phone screen went black after rebooting into recovery and still in that state.. no led, no download mode , no recovery nothing else just white lines on left corner.... I tried it to get its software repair but they said that the lcd has been fused and need to be replaced ...
I tried to connect it to pc and it is showing marshall london adb interface and in another pc it is showing Android with yellow mark which turned in to Android adb interface after installing drivers from internet
I tried fastboot.exe and adb.exe but no device found error in adb mode but some commands working as fastboot..
I want to know which partitions u flashed using fasboot and how because when i tried to flash it says cant load XXX.img (xxx belongs to the name of partition i flashed)
same problem is here....u found any solution???
AutoRec got my LG D802 bricked and now all i see white lines on screen. Can anyone help plzzzz
Hi guys, I might need some help or a walk through here, I might have bricked my phone. I stump-rooted my phone ( 4.4.2) and installed TWRP Recovery 2.8.1 initially , Installing SuperSU which patched my sdcard and rebooted causing my phone to get stuck in a boot loop giving me no access to download mode, just recovery. From there I tried to install Cynogen mod 12 in TWRP recovery to fix the bootloop but any attempt at flashing gave me an error "error executing updater binary in zip." So I extracted the folders and flashed the 2.7.0 recovery.img which sayed it worked but now my phone is still stuck in boot loop, no download mode and when I try to enter recovery I get stuck in fastboot mode with port change errors. I took some screenshots so it would be easier to help me out. Every time I plug in the USB I get the following errors, the screenshot is from continuous attempts
I have the mini sdk installed and Koush drivers. Device manager does not recognize my phone anymore but it does come up under Fastboot Interface
Any Help would be greatly Appreciated
Because I'm a new member I can't post screenshots so just add an h infront of the links.
Thanks in advance for all your help
ttp://i.imgur.com/mHcOYOL.jpg
ttp://i.imgur.com/WxZNNzi.png
Take a fresh KDZ for your model and flash it via LG FlashTool
wisefreakz said:
Take a fresh KDZ for your model and flash it via LG FlashTool
Click to expand...
Click to collapse
Can you please explain how to do that WITHOUT entering download mode?
Maybe LG Flash recognizes your phone and will do the job.
LG Flash does not recognize my phone at all. http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 Do you think this method will work?
hi , i have an lg g2 d802 and i tryed to flash a new rom it stoped in the middle and i unpluged the cable like a newbie :cyclops: . first it was stuck in fastboot i managed to repair it with ( SRKtool_2.1_droidth) http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 and btw thank you you saved me i found it in forum. download mode was able again . i tryed to flash another rom and it stoped again , now its on lg logo , cant go download mode, cant go recovery , factory reset dont help me and finally compter dont detect it .
please help.
:crying::crying:
Hi i have a Jiayu S3 which for the second time breaks up firstly from my official rom crashed unknown why and my brother managed to relive it installing twrp recovery and xtreme rom. Now againb crashed and enter in a bootloop while surfing on the net. I have to mention that i have [email protected] up my devive some time ago and cannot connencted via usb (pc or usb stick) things that used to do very often. Know i manage to get ito recovery install miui 9 rom(from need rom) but reboot continiously....get back to xtreme (from need rom again) and reboot continously...tried miui 7 rom boot loop again. So i stuck to boot loop!!! i can not use SP flash tools because my PC refuses to intall the correct MTK, MEDIATEK MT66XX or any VCOM ,usb etc drivers (( . It only sees my device as a composite device. I can't use fastboot as long as i don't know how to do it and how i can connect my device to pc . Please help is there any way i can get out of bootloop via sd card from recovery mode?? I am exhausted reading and searching and watching tutorials....Thanks in advance.
PS i manage only 2 times to enter in a chinese mode(black screen) but i don't know how to proceed in that and what does this mode do.
Still no one to help??
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.
giolandis said:
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.
Click to expand...
Click to collapse
Hi,
can you flash a ROM using SP-Flash Tools? With SPF you don't need the mobile to be switched on. Of course drivers for MTK must be installed properly before doing this. Maybe clearing cache and Dalvik could help as well.