[Q]LG L5 bricked help please!!! - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

hello friends I have a problem and I hope I help
I have the original 612G l5 lg movistar, but released for telcel
install "Rom" of Russians to install recovery
install "MIUI" but wanted to go back to the "stock rom"
but stay in brick in the logo "LG"
try "LG PC SUITE" gains access to the loading screen "MOVISTAR" but gets stuck
I can NOT do hard reset
I hope I can help
sorry for my bad english

Can you go to download mode? If you can you can flash a special kdz for downgrade, after that you can flash any kdz you want
http://forum.xda-developers.com/showpost.php?p=39606536&postcount=333

try this
remove battery/sim/sd
while pressing vol- connect your phone to the pc throught the cable.
you'll boot into emergency mode

Related

[Q] Soft-brick? ADB sees the phone.

Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Juxter said:
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Click to expand...
Click to collapse
Try again.
First refer to this thread:
dont see recovery and boot logo - http://forum.xda-developers.com/showthread.php?t=825173
And the original post by: Feuerbard
#22 - http://forum.xda-developers.com/showpost.php?p=9457010&postcount=22
Thumbs up solution to get logo
solution from 4PDA
flash first french firmware _hxxp://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz
(you must make kdz flasher fullscreen and change right option to CS_EMERGENCY)
dont boot android , remove accu reinsert them and press vol - and plug usb cable into port on mainboard - you must get in download mode )
flash firmware with fastboot (i use CIS _hxxp://narod.ru/disk/26675062000/V20B_00.kdz.html)
boot android and flash this firmware _hxxp://narod.ru/disk/25473801000/out.kdz.html
after this you must see all logo ( LG , Motion LG , Android )
after this flash firmware you like (custom fastboot e t с)
maybe some point is not needed but this tutorial work 100% and tested by myself
Click to expand...
Click to collapse
And the post by namco:
in post -- #45 - http://forum.xda-developers.com/showpost.php?p=10241289&postcount=45
namco said:
So after 4 5 6 or maybe 10 times, it will finally become working, that's what you're saying?
This is really odd, something's wrong with these phones lol
Okay, i'll load myself with a ton of patience and repeat the steps as per the instructions. This is *exactly* how i am doing it, with all the details:
1) Using the French v20A ROM - http://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz and this Russian one - http://narod.ru/disk/25473801000/out.kdz.html
2) Take out the battery, SIM card and SD card
3) While holding the Vol - button, plug USB into phone so that the phone goes into Download Mode
4) Run the KDZ Updater, put it into CS_Emergency mode
5) Select the French V20A rom and flash it
6) When it's finished (immediately after the DOWNLOAD MODE letters vanish), i pull out the USB plug from the PC, so that the phone doesn't boot.
7) Again hold Vol - and reinsert USB to put the phone back in Download Mode
8) In KDZ Updater (still in CS_Emergency mode) select out.kdz and flash it
9) Let the phone boot into Android
At this point i STILL don't have a boot animation, should i keep doing this until i see one appear?
When it (if) finally appears, i just flash my own ROM, do a factory reset and it should stay that way, correct?
I guess my impossibility to access recovery mode also has something to do with this...
Click to expand...
Click to collapse
Note: For above step: 1) Using the French v20A ROM
-- as long as you have the ROM of v20 with fastboot option, it doesn't really matter.
================
For out.kdz file alternate download link by fisher:
#59 - http://forum.xda-developers.com/showpost.php?p=10426771&postcount=59
Originally Posted by fishears
Try this:
http://www.mediafire.com/?u2mhgrbva8dr5cm
================
Hope this helps.
Thanks for the reply, I actually fixed it following this:
hxxp://modaco.com/topic/329863-how-to-raise-gt540-from-the-dead/
Once I got fastboot with that cwm.kdz I reflashed a fastboot rom, and from that one I could use the KDZ updater again, following the French kdz procedure...
The phone now is fully working recovery and bootanimations again

[Q] Need Help please !!! fail reboot after wipe

hi all,
i install cyanogemod on my lg g2 d802 but after that i try to reinstall it with an update, in the recovery menu,i wipe and then i realise that i can't find the update i download it . i reboot the phone and nothing after that i got only the lg g2 logo,i can't go in the recovry mode with the volume- and power bottom, but i can always go to the firmware update !
please healp me and sorry for my bad english

I will lose all of my data :(

Hello guys! I bricked my device, so it doesnt boot right now. I was on Cloudy Flex 2.8, then I wanted to flash Cloudy G2 3.3 (G4 ROM), but my phone was bricked. I wanted to solve these problems with SRK Tool. I did this option there: Unbrick - qhsusb_bulk 9006 (No Recovery Mode,No Download Mode).
Now, I can enter download mode, but afraid of entering recovery cause I think custom recovery lost, that's why If I try to enter recovery device will be factory reset. PC doesn't see my G2 Device gets "Security error" when boot. So, I dont know what I must to do. Want to back to stock but If I used to flash stock roms with kdz or tot methods after I must do factory reset And I don't want to do it. How can I backup my datas right now? And can I rescue my device without flashing stock Rom? Thanks in advance! Regards!!!
OMG Noone can help me :crying: Please, help me friends!!! I cannot do anything right now

lg stuck in lg logo , no twerp , download m or fastboot computer dont detect it help

hi , i have an lg g2 d802 and i tryed to flash a new rom it stoped in the middle and i unpluged the cable like a newbie :cyclops: . first it was stuck in fastboot i managed to repair it with ( SRKtool_2.1_droidth) http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 and btw thank you you saved me i found it in forum. download mode was able again . i tryed to flash another rom and it stoped again , now its on lg logo , cant go download mode, cant go recovery , factory reset dont help me and finally compter dont detect it .
please help.
:crying::crying:

Help me unbrick my phone!!

Hi, i wanted to go back to stock so i used lg bridge update error recovery to go back to stock and when it finished its stuck the the lg boot screen. please help
Loads threads out there on how to fix this issue, stop being lazy.
Flash full .kdz file from download mode (turn off the phone, hold vol down while connecting phone to PC) , with LG UP or UPPERCUT.
https://androidfilehost.com/?w=files&flid=197932
Make sure you download right KDZ for your model.

Categories

Resources