Need some expert assistance. The problem is my phone keeps crashing with systemui errors when using custom roms. It always happens after a reboot and usually within 1-3 days, depends on WHEN I reboot the phone. Let me give you a little backstory.
A little over a month ago, I was running AICP on my phone, but decided to try SimpleAOSP and Hells doctor.. So I created a backup in TWRP, then flashed SimpleAOSP and HD. The next day day I started getting the errors. At the time, I thought it was the kernel or a Titanium Backup glitch.
So I wiped and reflashed SimpleAOSP without HD and without restoring from TB. But the next day, systemui failed to start. I thought it might be a rom issue so I restored AICP from my TWRP backup. And I couldn't believe it when the same systemui errors happened. So I restored the backup again. Again it was okay for a few days, then error.
After that I copied everything from my phone to the PC and wiped internal storage. Then installed the same rom version from AICP that I had been using for weeks prior to all this. Same error after a few days.
So next I tried wiping internal storage again and flashing stock 4.4.4. I used that for over a week with no system errors. So I did a TWRP backup of Google stock rom, Then installed AICP again but this time without modifying any systemui type settings, I left the rom as stock as it could come. Didn't even restore apps or anything. I then the rebooted the phone a couple of times to test and the error came back. This was the same day I installed it.
So I restored the stock backup and have been running fine all week. I want to get back on a custom rom though. Any suggestions?
Am I getting no replies because I'm missing something really obvious?
Or can no one think of anything that I haven't already tried?
By the way, right after posting the OP I installed the L preview and it's been working fine so far. I figured if I had to run stock android it may as well be the latest thing.
Sent from my Nexus 4 using Tapatalk
I don't have any answer to your question but I was wondering if this happens without installing a custom kernel on CM11 and AOSP custom ROMs.
Thanks for replying.
When I tried SimpleAOSP, it was with and then without an additional kernel. I saw no difference as far as the error is concerned. I have not tried a CM11 based ROM since this all started.
Maybe I should try a custom rom that doesn't have heavy modifications like AICP has.
Sent from my Nexus 4 using Tapatalk
Are you flashing a Gapps package? A couple weeks ago when I was trying different ROMs I was getting system crashes after flashing PA Gapps and they updated. I never narrowed it down, but after uninstalling a bunch of them (News/Weather, Talkback, Keep, Newsstand, some others) so they wouldn't update, I stopped getting system crashes.
Idk why I have the feeling your theme/icon pack has something to do with it. I run pa and whenever I try to use click ui icon pack it happens to me but if I just run veu I don't have a problem. Try not using themes for a bit to see what happens
Sorry, I missed your responses, I had kinda given up on the whole thing. Android L is running good for an unfinished product.
Getting back to the original issue, no theme or icon pack was installed.
Yes, I was using PA gapps mini from 9-23. Maybe that was it.
But that would be weird because I don't remember my first ROM running PA gapps, not 100% sure... that was a month ago.
I'll try to install without any gapps package and report back. Thanks.
Sent from my Nexus 4 using Tapatalk
from my past history, I'm facing issues when I did 3 things :
1. if I just dirty flash or factory reset only before flashing new rom.
2. Did restore backup from TB (which from your explanation above, you don't have any problem TB)
Nowdays I always use wipe dalvik, system, data, cache. Because someone once told me if you changing roms, if not it's possible that the system setting from old rom will crash with the new ones. and for the wipe system part (some roms included that command in their roms zip file and some didn't).
Related
Hi All,
I'm having an issue with my G2. I've been running the CM11 nightlies for a while now, they've been pretty decent.
I decided to flash the newest Snapshot today when I saw it pop up on my update list. As soon as I booted, I got the error "Unfortunately, the process com.android.phone has stopped".
This happened yesterday, so I booted into recovery, cleared cash, reinstalled the rom, cleared cache again, reinstalled gapps, cleared cache again, and it worked. Now I'm not getting so lucky. Anyone have any ideas on how to fix this? I'm really hoping this isn't going to be an issue with every CM nightly moving forward.
The best solution I could find seems to be specific to HTC phones, which involves reinstalling the boot.img. I don't think that applies to us, but if it does, how can I do that.
Thanks for your help.
EtherBoo said:
Hi All,
I'm having an issue with my G2. I've been running the CM11 nightlies for a while now, they've been pretty decent.
I decided to flash the newest Snapshot today when I saw it pop up on my update list. As soon as I booted, I got the error "Unfortunately, the process com.android.phone has stopped".
This happened yesterday, so I booted into recovery, cleared cash, reinstalled the rom, cleared cache again, reinstalled gapps, cleared cache again, and it worked. Now I'm not getting so lucky. Anyone have any ideas on how to fix this? I'm really hoping this isn't going to be an issue with every CM nightly moving forward.
The best solution I could find seems to be specific to HTC phones, which involves reinstalling the boot.img. I don't think that applies to us, but if it does, how can I do that.
Thanks for your help.
Click to expand...
Click to collapse
You've done a clean flash? Meaning you wiped Dalvik, Cache, System, Factory reset? I usually erase twice and then install CM and then GAPPS then restart the phone (Don't install custom kernel) some custom kernels are having trouble because looks like they updates some things in their kernels.
xxxrichievxxx said:
You've done a clean flash? Meaning you wiped Dalvik, Cache, System, Factory reset? I usually erase twice and then install CM and then GAPPS then restart the phone (Don't install custom kernel) some custom kernels are having trouble because looks like they updates some things in their kernels.
Click to expand...
Click to collapse
Thank you.
After some more digging, I had the idea to check the development thread of the CM ROM here. Apparently, a few other users have had the same issue.
It turns out, the newest version of CM needs to be cleanly installed, a dirty flash won't work. I just did a wipe and it's now downloading all my apps and reinstalling.
*sigh* such a pain, but whatever. Could be worse.
EtherBoo said:
Thank you.
After some more digging, I had the idea to check the development thread of the CM ROM here. Apparently, a few other users have had the same issue.
It turns out, the newest version of CM needs to be cleanly installed, a dirty flash won't work. I just did a wipe and it's now downloading all my apps and reinstalling.
*sigh* such a pain, but whatever. Could be worse.
Click to expand...
Click to collapse
Yeah it can be such a pain, I flashed nightlies when they sounded like they fixed an important issue (it'd be every other day) and I flashed clean all the time. Now im just going to stick to CM11 M4 until the next milestone.
try changin network type to GLOBAL.
I got a question guys, i flashed the latest version PA for our device (PA4.5 beta 2) and notice i was having random reboots, i thought it was the rom, so i flashed CM latest nightly (2014815) & still was having reboots, so i figured it had to be an apk not playing nice & thought i was right when i noticed it was happening the most while using chrome, but it happened during the settings and some other apks, its not constant though, it very random, its like when you stay on an apk for a while, it just randomly reboots, anyone else been having this issue? or had this issue?, i both like two great theses for these roms & would feel like a fool if i cant use em lol, so any help would be appreciated, thanks
Are you wiping between flashes or dirty flashing?
If flashing clean, restore your apps (without data backups) one at a time. If you stop having the issue, then restore your app data one at a time.
If that doesn't fix it and you're flashing clean, going back to stock and doing a factory reset will almost certainly solve the issue.
frostedunit said:
Are you wiping between flashes or dirty flashing?
If flashing clean, restore your apps (without data backups) one at a time. If you stop having the issue, then restore your app data one at a time.
If that doesn't fix it and you're flashing clean, going back to stock and doing a factory reset will almost certainly solve the issue.
Click to expand...
Click to collapse
I always clean flash, I decided to flash sacs until a next major builds releases, thanks though
What kernel are you using?
Hi all,
Some time ago i asked, and received, some support on these forums on how to properly carry out a nandroid backup... following the sound advice i got, i carried out my backup (using TWRP for the record, with all the options checked), and stored it away for a rainy day... said day came yesterday, when i messed up my system and rendered it instable (i tried to manually delete the dalvik cache directory in order to free up the 2,5GB of space it was taking)... since i knew there was i high chance of this ending in disaster, the last thing i did before the delete was carry out another nandroid, so i could easily return to where i had left off... how wrong i turned out to be
as soon as i the system became instable following my experiment of deleting the d. cache directory, i recovered the latest nandroid (i.e. the one i had made just hours before) and everything seemd to go smoothely until the first reboot... when the following happened:
- first reboot after recovery took ages, much like the first reboot following the flashing of a new rom... not the end of the world, but that was the first sign that all was not well
- the status bar disappeared, and there was no way of making it come back (i.e. nothing to do with the launcher, i typically use apex but i i tried switching to both nova and touchwiz which i also kept up to date but the stats bar was nowhere to be seen)
- even if not having a status bar with all the info on it is acceptable (which of course it isn't, but lets just say), the sytem became completely instable after 5minutes of operation... with each app taking turns to shutting down until i kept getting the message "system UI has closed" over and over, to the point that doing a reboot was challenging since i barely had the time to press on the screen between instances of this bloody error message appearing...
...i did of course try and return to my older nandroid backup, but... lo and behold... exactly same behaviour...
so now i have resorted to formatting the internal memory card and flashing a new rom and basically starting over... just what i hope the nandroid would spare me basically :/
question is: does this sort of error sound familiar to anyone? can someone give me a tip maybe on what i may have done wrong?
any opinion, tips& advice much appreciated
I have the exact same problem. It happens on TW Lollipop ROMs. Haven't found a fix. I'm using Philz Touch Recovery and the old no knox bootloader.
Anyone? I have researched this but cannot find any similar problems reported... it can't just be me and pavelcheto...
Maybe it a recovery fault. Faulty backup or faulty restore.
No problems with my older backups. I restored my KitKat TW backup, working fine. Restoring CM12 backups also works fine. I've looked for a new recovery, Philz is discontinued, CWM hasn't been updated for a year and I really don't like TWRP.
I use TWRP 2.8.3.0 and never have (and hopefully never will) encountered any issues with restoring backups.
Considering i recovered 2 separate backups for a total of 3 times (i tried recovering the first backup twice) i doubt the issue was with the recovery itself... however since pavelcheto had no issues with the kk recovery maybe it could be lollipop related?
Anyone successfully recovered a lollipop nandroid backup?
platypus78 said:
Considering i recovered 2 separate backups for a total of 3 times (i tried recovering the first backup twice) i doubt the issue was with the recovery itself... however since pavelcheto had no issues with the kk recovery maybe it could be lollipop related?
Anyone successfully recovered a lollipop nandroid backup?
Click to expand...
Click to collapse
I recovered my lollipop gpe backup a couple of times without a problem.
Data encryption may cause restoring problems.
I have restored CM12 backups (based on 5.0.2) serveral times, no problem there. I've had issues only with TouchWiz Lollipop ROMs, I have tried different custom roms, all get bugged at restore.
pavelcheto said:
I have tried different custom roms, all get bugged at restore.
Click to expand...
Click to collapse
Just to make sure I understand correctly : you mean all TW custom roms you've restored have had problems?
Wonder if anyone else has managed a bug-free restore of a 5.x TW?
Yes, but only on Lollipop. KitKat TW roms restore just fine. I am using Philz Touch Recovery. I have tried 3 different TW Lollipop roms and they all fail to restore properly. No wallpaper, black wallpaper and no status bar. And after a minute or two System UI starts crashing. If then I do factory reset from recovery and the rom starts normally (welcome guide and stuff) and works fine.
bumping this thread because i cant seem to find a solution for this anywhere.
TheAwesomeBit said:
bumping this thread because i cant seem to find a solution for this anywhere.
Click to expand...
Click to collapse
There's no solution for this as per comments above. TW LP is not restorable. You can flash a new lollipop ROM tho'
Sent from my GT-I9505
Hi all, this is my first post so be nice!
First off, I'm a complete newbie when it comes to flashing custom roms. I've had my G900F for almost a year now and I always hated one thing about it: TouchWiz (or DungWiz as I like to call it). So, last week, I decided to take the plunge and flashed albinoman's CM13 on it. For the most part, it has served me well but I wanted to try out VRToxin as well and so, I flashed it today. However, I wasn't able to get past the Welcome screen because of constant 'SystemUI has stopped' error loop. To better explain my problem I'll list exactly what I did:
Note: Before flashing VRToxin, I had CM13 Dec 10 build.
1. Downloaded VRToxin-v2.0-20151205-klte-RELEASE and Stock GApps from opengapps.org
2. Copied the files to phone's internal storage.
3. Shut down the phone and booted it into TWRP.
4. Did a full nandroid backup.
5. Did a full wipe: Delvik cache, System, Data and Cache.
6. Flashed the VRToxin rom and then flashed the open gapps (stock)
7. Rebooted the phone and got to the Welcome screen. However, I cannot get past this as 'SystemUI has stopped' error keeps popping up.
I've since restored CM13 from TWRP backup.
If anyone can help out with this problem or provide info about why this is happening, I'd greatly appreciate it!
NadirMichael said:
Hi all, this is my first post so be nice!
First off, I'm a complete newbie when it comes to flashing custom roms. I've had my G900F for almost a year now and I always hated one thing about it: TouchWiz (or DungWiz as I like to call it). So, last week, I decided to take the plunge and flashed albinoman's CM13 on it. For the most part, it has served me well but I wanted to try out VRToxin as well and so, I flashed it today. However, I wasn't able to get past the Welcome screen because of constant 'SystemUI has stopped' error loop. To better explain my problem I'll list exactly what I did:
Note: Before flashing VRToxin, I had CM13 Dec 10 build.
1. Downloaded VRToxin-v2.0-20151205-klte-RELEASE and Stock GApps from opengapps.org
2. Copied the files to phone's internal storage.
3. Shut down the phone and booted it into TWRP.
4. Did a full nandroid backup.
5. Did a full wipe: Delvik cache, System, Data and Cache.
6. Flashed the VRToxin rom and then flashed the open gapps (stock)
7. Rebooted the phone and got to the Welcome screen. However, I cannot get past this as 'SystemUI has stopped' error keeps popping up.
I've since restored CM13 from TWRP backup.
If anyone can help out with this problem or provide info about why this is happening, I'd greatly appreciate it!
Click to expand...
Click to collapse
The problem is GAPPS. I noticed this too. Just do a full wipe (i know, again ) and install the GAPPS from VRToxin (filename = vrtoxin-gapps-mm-20151101). Link = http://downloadandroidrom.com/file/GalaxyS5/900froms/VRToxin. I don't have a actual fix but he its a workaround :cyclops:
Thanks Dante, I'll give it another go
NadirMichael said:
Thanks Dante, I'll give it another go
Click to expand...
Click to collapse
And? did it worked?
I'm gonna be honest with you im currently searching for the stock Lollipop (rooted) for S5 (SM-G900F) because this ROM isn't working for me.
- Bluetooth isn't working. (it does not turn ON, you can slide but its still OFF)
- 2x clock-app in the menu
- Music player does not work even the google play music app. ( i use VLC media player)
- No fingerprint security lock.
But its a pain in the [email protected]#$%^&*()_+ to find it here on XDA. If you know where to find it please let me know.
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
fraxby79 said:
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
Click to expand...
Click to collapse
I'd say do a clean install. If i have any issues with a rom booting i'll factory reset and install again. If i still have issues i'll just use another rom.
fraxby79 said:
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
Click to expand...
Click to collapse
I am in the same situation. Have tried all combinations of wiping and resetting with all 3 of the latest nightlies and still cannot boot. I can successfully boot into a stock rom but, I'd rather not. I guess I will go back to the 10/13 nightly since it worked (mostly) before this debacle. Hopefully next week's update will solve this problem.
Thanks for your reply, islandlife98. I'm not super-confident at this ROM thing yet so backing up, wiping and reinstalling is something I'd undertake reluctantly. I was hoping this was a common situation with a simple fix that I just had been unable to find. Always prefer to actually solve a problem if possible rather than just wipe it out. (Although when it comes to tech, wiping it out is often the best or only solution. Almost always the quickest.)
JBealZy, thank you for letting me know you're in the same boat! After seeing no mention of this issue here, I assumed it was some weird glitch with my phone rather than a problem with the updates. If you've done a full wipe and re-install but still haven't been able to boot into any of the last three releases then I'm glad I hesitated. (That was a concern I'd had: that it might not work even after a clean install.) Think I'll stick with 10/13 for now and keep trying the new releases; easy enough to roll back if it fails now that I've figured it out.
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Deediezi said:
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Click to expand...
Click to collapse
I am using Paranoid ( latest version) and everything works flawlessly.
Sent from my LEX727 using XDA Labs
Deediezi said:
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Click to expand...
Click to collapse
Another victim! So weird, I wonder what's going on there. None of the updates since my original post have worked so I've come to the conclusion that I'm going to have to do a clean install. Just need to find a time do it. Good to hear it worked for you.
LineageOS is the only ROM I've tried but since I have to wipe my phone anyway I may try some others. Paranoid Android looks interesting and Tsongming says it's working well.
fraxby79 said:
Another victim! So weird, I wonder what's going on there. None of the updates since my original post have worked so I've come to the conclusion that I'm going to have to do a clean install. Just need to find a time do it. Good to hear it worked for you.
LineageOS is the only ROM I've tried but since I have to wipe my phone anyway I may try some others. Paranoid Android looks interesting and Tsongming says it's working well.
Click to expand...
Click to collapse
Yea i'm downloading Paranoïd right now for testing it .. Don't want a broken operating system on my phone haha
If anyone's still interested, I first tried flashing Lineage after wiping all but internal storage and still couldn't get past the boot animation. Then did a full factory-reset wipe including the internal storage, re-flashed, and it finally booted. The first OTA update since then came through today and went off without a hitch so all seems well for now.
I did take a look at Paranoid before going back to Lineage. One big reason I use a custom ROM is to get security updates quickly and LOS reports the security patch level in the settings; I couldn't find this info in PA. Also, I use a pattern to unlock my phone and there didn't appear to be a way use a larger grid than the default 3x3. On the plus side (sort of), PA includes the LeEco remote control app, which seems to be the only way to use the IR hardware on this phone, but it asks for more permissions than I want to give (which, of course, is not PA's fault). So admittedly I didn't really give it a full and fair trial but those few little issues sent me back to the (usually) reliable familiarity of LOS.
I received a new LEX722 yesterday. The TWRP for zl1 is working fine, but I cannot get lineagos working.
I deleted:
- dalvik,
- system,
- cache
- data
- and also the internal storage
after rebooting into twrp I enabled usb debugguung and pushed the lineageos and gapps images via adb push to the phone.
I installed lineageos and gapps nano, but after booting to system, I get stuck in a black screen looping to a dark grey luminated display (no graphics at all).
Heistergand said:
I received a new LEX722 yesterday. The TWRP for zl1 is working fine, but I cannot get lineagos working.
I deleted:
- dalvik,
- system,
- cache
- data
- and also the internal storage
after rebooting into twrp I enabled usb debugguung and pushed the lineageos and gapps images via adb push to the phone.
I installed lineageos and gapps nano, but after booting to system, I get stuck in a black screen looping to a dark grey luminated display (no graphics at all).
Click to expand...
Click to collapse
Sorry, can't help you with that since I have a LEX727 which is apparently quite different from the LEX722. Official LineageOS is only supported on the LEX720 and LEX727: [ https://wiki.lineageos.org/devices/zl1 ]. The LEX722 (Elite) has it's own section here on the LeEco Pro 3 forum so check that out and see what they've come up with.