Allright my S4 (i9505) is facing that problem after i tried to flash S5 camera mod with CWM. This problem didnt get cleared after wiping with CWM. What i can do to fix this ASAP? New ROM with ODIN? Cheers!
Fast help would be really highly appreciated!!
Such Name said:
Allright my S4 (i9505) is facing that problem after i tried to flash S5 camera mod with CWM. This problem didnt get cleared after wiping with CWM. What i can do to fix this ASAP? New ROM with ODIN? Cheers!
Click to expand...
Click to collapse
If you have a backup, restore from from backup..
If you have a stock rom, reflash stock rom..data wipe and continue with your flashing ahead
Sent from my Ozcan GT-i9500 using XDA mobile app
Related
I've been searching for the stock kernal for at&t users for s bit now, can't find it I'm trying to fix the annoying "updating camera firmware,please wait..." message. Unless there's a better way, I'll just assume you have to flash the sock kernal to update it. But if you flash the sock Kernal, wouldn't the phone fail on boot?
Sent from my GT-I9505 using xda app-developers app
bubblebuddyi said:
I've been searching for the stock kernal for at&t users for s bit now, can't find it I'm trying to fix the annoying "updating camera firmware,please wait..." message. Unless there's a better way, I'll just assume you have to flash the sock kernal to update it. But if you flash the sock Kernal, wouldn't the phone fail on boot?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
What ROM are you running? Omega?
Sent from my GT-I9505 using xda app-developers app
rcklss1 said:
What ROM are you running? Omega?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
No, I'm running Wanamlite v1.0.
I just reinstalled the stock AT&T rom to allow the camera to update, but when I ran the camera, no update appeared. So I figured it was all set. After re-rooting, I re-installed Wanamlite and KT kernal, open up the camera, and sure enough the message re-appears. I didn't perform any wipes. But it looks like I'll have to because all the AT&T bloatware was re-installed again.
bubblebuddyi said:
No, I'm running Wanamlite v1.0.
I just reinstalled the stock AT&T rom to allow the camera to update, but when I ran the camera, no update appeared. So I figured it was all set. After re-rooting, I re-installed Wanamlite and KT kernal, open up the camera, and sure enough the message re-appears. I didn't perform any wipes. But it looks like I'll have to because all the AT&T bloatware was re-installed again.
Click to expand...
Click to collapse
Your mistake was reinstalling Wanamlite again. Here's how you install non AT&T ROMs
1. Root your phone. I used the one click TWRP and Loki method.
2. Factory Reset and install custom ROM.
3. Install AT&T kernel. Let it boot up. Open Camera.
4. Reboot to recovery. Install custom kernel. Wipe cache and Dalvik. Fix Permissions.
5. Reboot. All done.
Sent from my Galaxy S4
Baldilocks said:
Your mistake was reinstalling Wanamlite again. Here's how you install non AT&T ROMs
1. Root your phone. I used the one click TWRP and Loki method.
2. Factory Reset and install custom ROM.
3. Install AT&T kernel. Let it boot up. Open Camera.
4. Reboot to recovery. Install custom kernel. Wipe cache and Dalvik. Fix Permissions.
5. Reboot. All done.
Sent from my Galaxy S4
Click to expand...
Click to collapse
Thanks, you're right about my mistake lol I ended up just installing someone else's ROM and it works perfectly. I'm a bit lost reading your instructions, It was my understanding that custom ROM's would not load with stock kernel?
bubblebuddyi said:
Thanks, you're right about my mistake lol I ended up just installing someone else's ROM and it works perfectly. I'm a bit lost reading your instructions, It was my understanding that custom ROM's would not load with stock kernel?
Click to expand...
Click to collapse
You need a carrier kernel for your custom ROM.
Sent from my Galaxy S4
Baldilocks said:
You need a carrier kernel for your custom ROM.
Sent from my Galaxy S4
Click to expand...
Click to collapse
can you link to a stock kernel for the AT&T i337?
xxhorseriderxxx said:
can you link to a stock kernel for the AT&T i337?
Click to expand...
Click to collapse
Exactly, its nice he can recommend installing a stock kernel, but they are not to be found. I asked in another thread and didn't get an answer. I somehow got it to work just wiping and installing Omega 5.0 Then to get wifi to work I installed ktoonez kernel.
Sent from my GT-I9505 converted SGH-I337
highaltitude said:
Exactly, its nice he can recommend installing a stock kernel, but they are not to be found. I asked in another thread and didn't get an answer. I somehow got it to work just wiping and installing Omega 5.0 Then to get wifi to work I installed ktoonez kernel.
Sent from my GT-I9505 converted SGH-I337
Click to expand...
Click to collapse
okay, assuming you're using the AT&T variant, I did this:
I got the looping "installing camera firmware" and tried faux an ktoonsez with no luck
I flashed this tmobile stock kernel and the camera firmware updated successfully by going into the camera app.
I then just flashed faux kernel back and everything worked great.
http://forum.xda-developers.com/showthread.php?t=2271976
I use shabbypenguin's auto loki CWM recovery, but you'll have to definitely flash the loki patch after the tmo kernel to make this work.
http://forum.xda-developers.com/showthread.php?t=2291956
Hello
I having a strange issue on my rooted I9505 device. Flashed custom roms are working well but when i want to restart, my system hangs every time in the samsung boot logo. I tried several times but without any luck. Furthermore i am using TWRP recovery and ROM][I9505][XXUBMGA][30Jul] Omega v9.0. Anyone who can helpme to solve this issue? Really appreciated!! Cannot use my Galsaxy S4 mobile right now..........
Dataking said:
Hello
I having a strange issue on my rooted I9505 device. Flashed custom roms are working well but when i want to restart, my system hangs every time in the samsung boot logo. I tried several times but without any luck. Furthermore i am using TWRP recovery and ROM][I9505][XXUBMGA][30Jul] Omega v9.0. Anyone who can helpme to solve this issue? Really appreciated!! Cannot use my Galsaxy S4 mobile right now..........
Click to expand...
Click to collapse
FYI, you may want to ask this on the 9505 forum. You're exponentially more likely to get an applicable answer there than you are from another device's forum.
Sent from my Nexus 7 using Tapatalk 4
Dataking said:
Hello
I having a strange issue on my rooted I9505 device. Flashed custom roms are working well but when i want to restart, my system hangs every time in the samsung boot logo. I tried several times but without any luck. Furthermore i am using TWRP recovery and ROM][I9505][XXUBMGA][30Jul] Omega v9.0. Anyone who can helpme to solve this issue? Really appreciated!! Cannot use my Galsaxy S4 mobile right now..........
Click to expand...
Click to collapse
TWRP 2.6 gave me the same issue so i downgraded to 2.5.0.2 and been stable since.
Checkm8 said:
TWRP 2.6 gave me the same issue so i downgraded to 2.5.0.2 and been stable since.
Click to expand...
Click to collapse
Just flash with ODIN again to downgrade?
Dataking said:
Just flash with ODIN again to downgrade?
Click to expand...
Click to collapse
Downgraded, same issue, with Philz Touch CWM same issue. What is wrong with the I9505? What is causing this boot problem?
Hello All,
find the solution to solve my issue using method 3:
http://www.ibtimes.co.uk/articles/4...i9500-gti9505-unbrick-softbrick-hardbrick.htm
this will help maybe some other people!
There are many models of s4 so be careful
Moved to correct device forum
After rom and kernel install (i dont know which one cos i installed many) i lost all the sensors, anyone have an idea to solve this ? Except full system and stock rom recovery
Thanx guys
Sent from my LG-D802 using XDA Premium 4 mobile app
squee9 said:
After rom and kernel install (i dont know which one cos i installed many) i lost all the sensors, anyone have an idea to solve this ? Except full system and stock rom recovery
Thanx guys
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
have you tried flashing a different baseband?
XxZombiePikachu said:
have you tried flashing a different baseband?
Click to expand...
Click to collapse
yes i tried latest kitkat baseband but it didnt work
You can see the rom/kernel name in about settings but so far as i know you probably have to reflash an kernel/rom to fix the sensors or you need to locate the sensor files from the g2 rom you're using and make an flashable zip from it.
same problem,how can i fix it,please help me
Can you guys to do a clean flash and flash KK modem first and then the rom?
Have you tried backing up your current rom, restoring stock rom backup, and restoring the custom rom again? Works for me every time.
Sent from my LG-D800
I tried flashing many custom rom CloudyG3_1.3,CloudyStock_2.5 and stock rom 4.2.2 4.4.2 and flash KK_Baseband_D802 but nothing happened
solved! cant remember exactly but certainly i flashed another baseband and it solved my problem
haha169 said:
I tried flashing many custom rom CloudyG3_1.3,CloudyStock_2.5 and stock rom 4.2.2 4.4.2 and flash KK_Baseband_D802 but nothing happened
Click to expand...
Click to collapse
Hello,
Try this BaseBand : https://drive.google.com/open?id=0B3k06KRLerMUTmRUVFp2cjI4RnM&authuser=0
Ok guys ..hi there. I am running PAC ROM 4.4.4..ok guys am having an issue ..i originally got this phone (i9500) with 4.4.2 kitkat touchwiz i rooted it and installed twrp 2.6.0.0 and all was well..Then i decided to install the ozcan rom 6.3 ...after flashing the rom...the first boot was stuck on Samsung logo ( and yes i advance wipe my phone several times using the mke2fs format) and this rom is for my model! So i was disappointed... Then i wiped again and tried to restore my backup which also led to a bootloop..soo i had no choice but to flash a next ROM... The rom that worked was 4.2.2 wanam lite (jellybean) ..i got tired of it and went to pac ROM now.i wanted to try the ozcan rom again.. It didn't work! I tried arrow rom..it didn't work ..and these worked for other i9500 users..so am wondering is my recovery outdated and not doing it correctly ? So the main question is WHY CANT I INSTALL A TOUCHWIZ KITKAT ROM??
Sent from my GT-I9500 using XDA Free mobile app
BenDroid1 said:
Ok guys ..hi there. I am running PAC ROM 4.4.4..ok guys am having an issue ..i originally got this phone (i9500) with 4.4.2 kitkat touchwiz i rooted it and installed twrp 2.6.0.0 and all was well..Then i decided to install the ozcan rom 6.3 ...after flashing the rom...the first boot was stuck on Samsung logo ( and yes i advance wipe my phone several times using the mke2fs format) and this rom is for my model! So i was disappointed... Then i wiped again and tried to restore my backup which also led to a bootloop..soo i had no choice but to flash a next ROM... The rom that worked was 4.2.2 wanam lite (jellybean) ..i got tired of it and went to pac ROM now.i wanted to try the ozcan rom again.. It didn't work! I tried arrow rom..it didn't work ..and these worked for other i9500 users..so am wondering is my recovery outdated and not doing it correctly ? So the main question is WHY CANT I INSTALL A TOUCHWIZ KITKAT ROM??
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
You could try updating recovery. And maybe try to flash it via Odin (if that's possible)
Hi guys ..so it turns out that my recovery was outdated (twrp 2.6.0.0) its working great now..i love this ROM i don't think i'll be changing for a while. ..Until 6.4 gets out lollipop based ....So yea guys now i have 6.3 ozcan rom and the latest philz touch recovery ...i flashed it via twrp
Sent from my GT-I9500 using XDA Free mobile app
Hi Guys,
As you can see, I am new to this site. My phone is S4 19505. Yesterday, I tried to root my phone and that was a succes. Problem began when I want to install kernel for longer battery life. I have installed kernel from http://forum.xda-developers.com/showthread.php?t=2297379 and I have chosen Touchwiz KitKat 4.4 version. After I flashed this kernel my s4 is not starting. It just stuck at first screen "where we get first white letters samsung galaxy s4".
I have no idea what to do now.
Can anyone please help me?
Advance thanks.
safi_k19 said:
Hi Guys,
As you can see, I am new to this site. My phone is S4 19505. Yesterday, I tried to root my phone and that was a succes. Problem began when I want to install kernel for longer battery life. I have installed kernel from http://forum.xda-developers.com/showthread.php?t=2297379 and I have chosen Touchwiz KitKat 4.4 version. After I flashed this kernel my s4 is not starting. It just stuck at first screen "where we get first white letters samsung galaxy s4".
I have no idea what to do now.
Can anyone please help me?
Advance thanks.
Click to expand...
Click to collapse
Did you follow the instruction of the OP, wipe cache and wipe dalvik after installing it?
Interface23 said:
Did you follow the instruction of the OP, wipe cache and wipe dalvik after installing it?
Click to expand...
Click to collapse
Yes, I did everything as there said.
safi_k19 said:
Yes, I did everything as there said.
Click to expand...
Click to collapse
Are you using cmw or twrp? I believe your stock rom is 4.4 kitkat
Interface23 said:
Are you using cmw or twrp? I believe your stock rom is 4.4 kitkat
Click to expand...
Click to collapse
twrp. I dont know what you mean by stock rom because this is my first time I did. My device is running 4.4.2. and I chose for kernel 4.4 version of tw.
I think that you have to re-flash a new rom. Then, you have to retry installing root and the kernel.
msmlz said:
I think that you have to re-flash a new rom. Then, you have to retry installing root and the kernel.
Click to expand...
Click to collapse
I agree with msmlz, if you have nandroid restore it or download the firmware in sammobile and reflash it and before flashing the custom kernel again, read the thread, see if someone face bootloop like you. Hope someone with experience on it could help you, I never install custom kernel, just update the last stock kernel on my rooted stock rom.