Good day! Who realties faced such problem .When battery installation immediately light touch buttons and a white LED and is on the phone to work is not affected, is working properly is not buggy (tried stokSBF, SM7, CM11 result is the same) The question is how to put out these ****ing buttons and LED. Sorry for my english
Related
Hello,
since last night i noticed a constantly glowing of the amber LED on the power button.
Normally it starts lighting when i charge the device, but now it lights up permanantly (without charging), only a little bit weaker in comparison to the amber light while charging...
Any idea why it starts glowing all the time?
Thanks
Try a soft reset.
Hi,
i´ve tried a soft- an a hard reset - no change...
A few minutes ago the amber led stopped lighting - everything seems to bo ok for now.
Strange
Insert Twilight zone tune...
I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.
FrancoBollo said:
I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.
Click to expand...
Click to collapse
I may be wrong but i was under the impresion that this was a sensor rather than a LED.
No, that's entirely correct, it is the light sensor. The LED is in the power button.
the status led is on the power button on the top right hand side of the blackstone...the place u highlighted is a sensor as what scotia has point out..
I think that it is a proximity sensor used to blank screen when you put the phone on your ear to talk.
It's actually the light sensor used for when you have automatic display brightness enabled. When it's dark, it turns down the brightness... And when it's a sunny day it cracks it up. I am not sure whether it's used to blank the screen during a call... This seems to happen after a period of time has elapsed.
Gav
ok thanks for the info.
So does the power LED on the top side flash any color to show the status of the reception or does it only light up orange when it charges?
Thanks.
doesn't do anything for reception..although mine flashes green hen I have a message/email/reminder
pity though, a decent LED to show such things was probably high on everyone's wishlist
No, the HD is perfectly unobtrusive. On my last PDA the LED had to be tweaked to stop flashing.
Too bad this isnt a LED diode Since I got on my Diamond a light notification (on the bottom of device)... when I recieved new sms... now on HD there is no way I can figure do I have new sms or notification unless I turn the screen on. The only hardware flaw by mine opinion
When its lying down, I agree with you. Then I have to turn on the screen. However when its lying next to me I'm usually not in a place were I can't use my phone, so the sound is on anyway.
I actually think its quite good the LED is on the top, it's easelly visible when the phone is in my pocket. I just have to pull the phone up a little and look down to see the LED (no need to get it out and turn the screen on). I like it on the top, nice and discreet, and not anoying me when I'm looking at the device while using it.
Perhaps a combination would be nice? Front and top That would sattisfy most people I guess...
Hello everyone,
I upgraded my device from kitkat to lollipop some time ago (to 5.0.1) but lately i've had some problems with the ROM. These bugs are mostly not very annoying, but the LED bug is. Sometimes when i get a notification and read it, the LED doesn't stop flashing till i turn off LED notifications in the settings menu. This is also for charging battery (phone is charging (with red LED) -> fully charges so LED turns green -> I disconnect -> red LED still on). This counts for both front and back LED.
How can i fix this? Is there a fix at all? Or do i have to wait till further updates on the device?
MartinoNL
PS i find it weird that you can only turn off the notification led for charging for the front LED, not the back LED
PPS i am a phone noob so explain stuff a little bit easier if things have to get complicated to fix
for me, when this bug appears just put the phone in do not disturb mode and put it normal again, the led stop blinking
donkanmcklaus said:
for me, when this bug appears just put the phone in do not disturb mode and put it normal again, the led stop blinking
Click to expand...
Click to collapse
thanks for replying and yes this is indeed a temporary fix but doing this (or switching the LED notification on and off) gets quite annoying after 25% of the notifications. that is why i want to fix it. i dont want to turn the led off since i do want to see the notifications
Hello, I'm working on stock ROM, Android 7.1. Today I realised that my LED light stopped working at all (when charging, notifications, etc.). Could it be somehow changed in settings or software, or does it mean that it just broke?
Thanks
Well, it turns out that LED light works when my device is turned off... But still when it's on, the diode doesn't work. Did anyone have a problem like this?
Finally I found this! I thought that there are no options related to LED light, well there are, but it was teribbly translated to polish. It was in screen options, "Migające przyciski dotykowe" - something like "Blinking touch buttons". I would never say it is about LED light.
Sorry for making mess on forum, my problem is solved
Galaxy Tab A 8.0 (2017) / T-385M
Did someone experience that? When I plug tablet in charger, the LED flash from the back turns itself in a weak light, like if it's trying to simulate a notification led, like those we can see on screen of others smartphones to advise it's charging. When you open tha case, LED flash turns off slowly (fading). Close the case and it turns on again. It's rare to use this tablet. First time I notice that!
I'm afraid it's a problem.
LED flash is working normaly for shots.
What do you think?