So I was using some aosp rom not long ago and I flashed the custom modem to have functional rotation, NOTE: I DID back it up before.
BUT! yesterday I flashed Pardus and to have my rotation back I wanted to Flash my backup efs, but accidentally flashed the backupper which caused the back-up to be rewritten with the modded one.
So now I'm stuck with no rotation and a modded modem
WAT DO
Thanks in advance
Reflash the KitKat modem
danial.aw said:
Reflash the KitKat modem
Click to expand...
Click to collapse
The one I flashed in order to flash KK from JB?
No just download the KitKat baseband and flash that... It should fix rotation and stuff
Related
Hi, I recently tried updating to the 4.2.2 via a custom recovery (CWM). I was on matrix v5 custom kernel so i flashed to stock kernel. I made a nandroid backup before i flashed the stock kernel. I went ahead and updated and it removed my root and custom recovery, so i re flashed CWM via adb and restored to my nandroid backup9i know i could have just rooted again, but i just wanted to see if there were any big changes in 4.2.2, like otg support).
The problem starts here, my N4 wont rotate, or do anything where the sensors are needed. The phone was working properly at the time of the nandroid backup so its not anything i did before. Any and all help is appreciated. Thank you
desertflame said:
Hi, I recently tried updating to the 4.2.2 via a custom recovery (CWM). I was on matrix v5 custom kernel so i flashed to stock kernel. I made a nandroid backup before i flashed the stock kernel. I went ahead and updated and it removed my root and custom recovery, so i re flashed CWM via adb and restored to my nandroid backup9i know i could have just rooted again, but i just wanted to see if there were any big changes in 4.2.2, like otg support).
The problem starts here, my N4 wont rotate, or do anything where the sensors are needed. The phone was working properly at the time of the nandroid backup so its not anything i did before. Any and all help is appreciated. Thank you
Click to expand...
Click to collapse
This has already been answered...I dont have a link but keep looking through this forum and you will find a fix. Unfortunately if I flash a 4.2.2 rom and flash the fix it seems to break wifi....Im sure it will be resolved soon.
headcreepz said:
This has already been answered...I dont have a link but keep looking through this forum and you will find a fix. Unfortunately if I flash a 4.2.2 rom and flash the fix it seems to break wifi....Im sure it will be resolved soon.
Click to expand...
Click to collapse
Found it, Thank you
Sorry I didn't search, I was just worried I hope there's a fix for the wifi soon though!
desertflame said:
Found it, Thank you
Sorry I didn't search, I was just worried I hope there's a fix for the wifi soon though!
Click to expand...
Click to collapse
EDIT: Fixed. I reflashed 4.2.1 from stock then rooted etc. Then flashed the 4.2.2 update. Everything works properly now.
Just to add something incase other look through this: The 4.2.2 update needs the updated baseband.
From http://forum.xda-developers.com/showpost.php?p=37977813&postcount=3:
4.2.1 Baseband = M9615A-CEFWMAZM-2.0.1700.33
4.2.2 Baseband = M9615A-CEFWMAZM-2.0.1700.48
Not Compatible - 4.2.2 Baseband With 4.2.1 Rom - Reportedly breaks sensors.
Not Compatible - 4.2.1 Baseband With 4.2.2 Rom - Reportedly breaks in-call audio.
I had 4.3 STOCK on i9500 and I installed CM 11 over it. Now I am not able to revert back to stock rom using odin also! I put the 4.3 stock rom file in pda and then it says, unsupported version. What can I do!! Pls. Help ME!!!:crying::crying::crying:
What STOCK version u flashed?
Joku1981 said:
What STOCK version u flashed?
Click to expand...
Click to collapse
I9500XXUEMJ9_I9500ODDEMJ5_I9500DDUEMJ9_HOME.tar.md5
Exact file name.
I was on stock 4.3 before installing Cm 11
SOLVED!!
SOLVED!!!!
After flashing 4.3 firmware, I got stuck on bootanimation.
Later, I Wiped Data/Factory Resetted my phone and Wiped cache using Stock Recovery And BOOM!, Here comes the victory dance!:highfive:
Hi,
i used mobileOdin to install 4.4.2 (I9505XXUFNA1) from the thread along with the kernal.
but after installing it the WiFi Fix i have messed my sound up aswell!!!
Please can someone help me restore my sound and wifi back
aniqpirzada said:
Hi,
i used mobileOdin to install 4.4.2 (I9505XXUFNA1) from the thread along with the kernal.
but after installing it the WiFi Fix i have messed my sound up aswell!!!
Please can someone help me restore my sound and wifi back
Click to expand...
Click to collapse
Have you updated your baseband and modem to match your new ROM? You need to flash them in desktop Odin, normally a few times in a row, and once you reboot your WiFi etc should be back.
rory1980 said:
Have you updated your baseband and modem to match your new ROM? You need to flash them in desktop Odin, normally a few times in a row, and once you reboot your WiFi etc should be back.
Click to expand...
Click to collapse
i kinda messed up my sound. bcz i was on 4.2.2 bootloader (without knox) and on 4.4.2. then used the 4.4.2 WiFi fix which messed up my sound :crying::crying::crying::crying::crying:
aniqpirzada said:
i kinda messed up my sound. bcz i was on 4.2.2 bootloader (without knox) and on 4.4.2. then used the 4.4.2 WiFi fix which messed up my sound :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Ahh, well if you still have the 4.2.2 bootloader then you'll probably have some WiFi/sound issues depending on the ROM you pick. You can always flash a 4.2.2 Based ROM to unbork your phone and then look for an alternative?
rory1980 said:
Ahh, well if you still have the 4.2.2 bootloader then you'll probably have some WiFi/sound issues depending on the ROM you pick. You can always flash a 4.2.2 Based ROM to unbork your phone and then look for an alternative?
Click to expand...
Click to collapse
nvm
i just flashed 4.4.2 and got the new bootloader. knoxed ftw xD
Hi Guys,
So I tried the new stock Kitkat firmware for my d802. Flashed the KDZ through support tool. I lost root as expected.
Then I started to miss root and control over my phone, so I wanted to go back to Jellybean.
After some difficulties I got the support tool working in offline mode. Flashed Jellybean stock KDZ.
Rooted the phone again and installed recovery.
Converted the stock KitKat rom to a flashable zip, and copied it to SD card.
I flashed the zip and all went fine.
Anyhow, when I wanted to return to recovery it did a factory reset instead, and now I can start all over.
Do we have a solution to this problem?
Thanks.
A
szaboagoston said:
Hi Guys,
So I tried the new stock Kitkat firmware for my d802. Flashed the KDZ through support tool. I lost root as expected.
Then I started to miss root and control over my phone, so I wanted to go back to Jellybean.
After some difficulties I got the support tool working in offline mode. Flashed Jellybean stock KDZ.
Rooted the phone again and installed recovery.
Converted the stock KitKat rom to a flashable zip, and copied it to SD card.
I flashed the zip and all went fine.
Anyhow, when I wanted to return to recovery it did a factory reset instead, and now I can start all over.
Do we have a solution to this problem?
Thanks.
A
Click to expand...
Click to collapse
We are waiting for LG to release KitKat kernel sources for D802 before a solution can be made, but it does require you to go back to JB again and then flash a KitKat rom with the modified kernel in order to keep your custom recovery
GizmoKaca said:
We are waiting for LG to release KitKat kernel sources for D802 before a solution can be made, but it does require you to go back to JB again and then flash a KitKat rom with the modified kernel in order to keep your custom recovery
Click to expand...
Click to collapse
Thanks. I thought that if it was a flashable zip, I could always return to custom recovery, but of course it is the content of the file that needs to be modified. I'll wait.
GizmoKaca said:
We are waiting for LG to release KitKat kernel sources for D802 before a solution can be made, but it does require you to go back to JB again and then flash a KitKat rom with the modified kernel in order to keep your custom recovery
Click to expand...
Click to collapse
it would not be just a modified kernel it would be an entirely modified zip with parts from 4.2.2 and 4.4.2 so that it can support custom recovery like in jb but be able to boot into kk in fact the only reason we need the kernel source is because we have to add some lines so it can allow jb and kk partiotions to work together
---------- Post added at 11:30 AM ---------- Previous post was at 10:33 AM ----------
D802 kit Kat kernel source just came out a few hours ago so soon you guys should see a stock kk Rom with root and recovery support
Sent from my LG-D800 running kitkat using XDA Premium 4 mobile app
Can't wait to see that. Is there any downsides to this method or is all working well with this work around?
Sent from my LG-D802 using Tapatalk
ephumuris said:
Can't wait to see that. Is there any downsides to this method or is all working well with this work around?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
I have been using it but for att and have not experienced any troubles and I also know of a few people who have already flashed roms whitput trouble also it seems like the g pro 2 rom might be the first to seeing custom recovery on d802 since someone there already made a patch but has not tested it yet and thus has not released it yet
I recently updated my D802 to the 3 branded KK stock Rom, then I rooted it, put a custom recovery on it, and then made a nandroid backup/EFS backup. Now I tried an AOSP (Pacman) Rom to find rotation didn't work so I flashed the reconfigured KK modem so I could fix that. Now I realized that I wanted stock again, so I restored my Nandroid/EFS backup only to find that rotation doesn't work? What did I do wrong/miss out? Do I need to flash the KDZ again?
Sent from my LG-D802 using Tapatalk
goodguy25 said:
I recently updated my D802 to the 3 branded KK stock Rom, then I rooted it, put a custom recovery on it, and then made a nandroid backup/EFS backup. Now I tried an AOSP (Pacman) Rom to find rotation didn't work so I flashed the reconfigured KK modem so I could fix that. Now I realized that I wanted stock again, so I restored my Nandroid/EFS backup only to find that rotation doesn't work? What did I do wrong/miss out? Do I need to flash the KDZ again?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
You need to get to a known base state, so a FULL WIPE and kdz flash sounds like a plan.