i just received my new G2 D802 16GB,
i tried to upgrade to kitkat with this guide
(flashed Switzerland 16GB D80220F_00.kdz)
i ended up with a phone that wont boot, it got stuck it fastboot mode, i messed with fastboot until i got to the point i had download mode again, (i messed with the partitions: sb1,tz,laf...)
i tried flashing many roms (Europe Open D80210A_00,UK Open 16GB D80210B_00,Hungary OPEN 16GB KitKat D80220B)
the roms load fine, but now the touch response is unusable (touching a point is being registered in another spot altogether).
this happened with every rom i have tried.
i tried with the tot method from the same thread, i got memory Size mismatch 32G! error (i have a 16GB model),
i tried the tot again with the 32GB rom and it passed, but the problem remains (the bad touch response).
what do i need to do?
Why didn't you just use the PC program to update?
Do it
guynaa said:
i just received my new G2 D802 16GB,
i tried to upgrade to kitkat with this guide
(flashed Switzerland 16GB D80220F_00.kdz)
i ended up with a phone that wont boot, it got stuck it fastboot mode, i messed with fastboot until i got to the point i had download mode again, (i messed with the partitions: sb1,tz,laf...)
i tried flashing many roms (Europe Open D80210A_00,UK Open 16GB D80210B_00,Hungary OPEN 16GB KitKat D80220B)
the roms load fine, but now the touch response is unusable (touching a point is being registered in another spot altogether).
this happened with every rom i have tried.
i tried with the tot method from the same thread, i got memory Size mismatch 32G! error (i have a 16GB model),
i tried the tot again with the 32GB rom and it passed, but the problem remains (the bad touch response).
what do i need to do?
Click to expand...
Click to collapse
Maybe you can try that thing from update touch driver or whut from hidden menu.
I also read that some people also had this issue on kitkat but not on jellybean stock
So try some things and report back :silly:
TheHaso said:
Why didn't you just use the PC program to update?
Do it
Click to expand...
Click to collapse
i tried, but the update failed using the official lg software (i was on 4.2..2)
wulsic said:
Maybe you can try that thing from update touch driver or whut from hidden menu.
I also read that some people also had this issue on kitkat but not on jellybean stock
So try some things and report back :silly:
Click to expand...
Click to collapse
i think you meant this
i cant do it because the touch is crazy and i cant even open the dialer using current touch response...
i was able to get adb running if that helps
guynaa said:
i tried, but the update failed using the official lg software (i was on 4.2..2)
i think you meant this
i cant do it because the touch is crazy and i cant even open the dialer using current touch response...
i was able to get adb running if that helps
Click to expand...
Click to collapse
Yes I meant that Step3 from that url.
What you can do is 3 things.
Downgrade to 4.2.2 :/
Connect an Usb OTG mouse to your phone.
Try or OSP(On screen phone) works.
If these things don't work then you must try to find something else cause further then this I don't have any Idea at the moment, maybe later...
Goodluck:good:
wulsic said:
Yes I meant that Step3 from that url.
What you can do is 3 things.
Downgrade to 4.2.2 :/
Connect an Usb OTG mouse to your phone.
Try or OSP(On screen phone) works.
If these things don't work then you must try to find something else cause further then this I don't have any Idea at the moment, maybe later...
Goodluck:good:
Click to expand...
Click to collapse
thanks,those are 2 great ideas i wish i had thought about!,
i sent the phone to be serviced, i will post here the outcome if that matters.
Ahh okay, sorry for late reaction was busy with school.
If your phone gets serviced then they will also probably ship it back with 4.4.2 stock and also with normal working touch .
you can post the outcome if you want I think
Just wait for it till you get your phone back, then you will be happy again
Update your touch software from service menu and you should be okay.
Check xda for. Service menu code
Sent from my LG-D802 using xda premium
i managed to solve this.
i bought this "d802" online, the box, phone sticker and "about" all said it was a d802 (normal back panel, no "ATT" logo),
after i opened the phone i discovered the logic board is actually a d800.
i managed to change the model number in build.prop (to d800), and flash the d800 with the tot method, the phone works fine now,
if anyone have the same problem and finds this thread, contact me and i will try to help
guynaa said:
i managed to solve this.
i bought this "d802" online, the box, phone sticker and "about" all said it was a d802 (normal back panel, no "ATT" logo),
after i opened the phone i discovered the logic board is actually a d800.
i managed to change the model number in build.prop (to d800), and flash the d800 with the tot method, the phone works fine now,
if anyone have the same problem and finds this thread, contact me and i will try to help
Click to expand...
Click to collapse
I had same issue.. I had touch problem and I got it repaired and paid 4500PKR = around 45USD and it was D800 .. Why didnt I see this before (
OKay one question , If i root it and update it to Kitkat and edit build.prop to D802 , will it show D802 again ? if yes then I can do that and return it to the local shop where I bought the phone from..
-iNCEPTiON- said:
I had same issue.. I had touch problem and I got it repaired and paid 4500PKR = around 45USD and it was D800 .. Why didnt I see this before (
OKay one question , If i root it and update it to Kitkat and edit build.prop to D802 , will it show D802 again ? if yes then I can do that and return it to the local shop where I bought the phone from..
Click to expand...
Click to collapse
no, the d800 cant run firmware built for the d802,
you should flash this tot and upgrade to kitkat (if you want) using this method
guynaa said:
no, the d800 cant run firmware built for the d802,
you should flash this tot and upgrade to kitkat (if you want) using this method
Click to expand...
Click to collapse
Yes I am asking if I use tot method to update to kitkat and root it .. then edit build.prop and change to D802 , will it show D802 in About Phone?
-iNCEPTiON- said:
Yes I am asking if I use tot method to update to kitkat and root it .. then edit build.prop and change to D802 , will it show D802 in About Phone?
Click to expand...
Click to collapse
i am not sure, but i believe that the phone wont boot into android if you do that (i have the reverse case),
why would you want to do that?
guynaa said:
i am not sure, but i believe that the phone wont boot into android if you do that (i have the reverse case),
why would you want to do that?
Click to expand...
Click to collapse
Hmm i want to do that coz when i got the phone from him it showed d802 in about phone and back of the phone as well ...so i want to do that again to get it replaced as i need d802
Sent from my LG-D802 using Tapatalk
Related
PLEASE READ EVERYTHING FOR BETTER UNDERSTANDING
Hey fellow LG Owner(s) I am writing this asking for some help. I know that majority of LG Phones use the same software and flashing tools regarding taking your phone back to stock. I currently own an LG G Flex (LS995 Sprint Variant) and I managed to soft brick my phone. I have posted this same message over at the LG G Flex Threads but so far I have gotten no one to provide me some sort of solution on how to un-brick or factory reset my phone.
The status of my phone before it got bricked was it had Root (IOROOT method), Busy-Box (by Jrummy), Build.Prop was edited to display as a Nexus 5, and boot-loader locked along with no custom recovery. If you’re wondering why my boot-loader was locked and why there wasn’t any type of custom recovery was due to the sad fact that Developers are having a hard time on cracking it.
Now to explain on how I soft bricked my phone. I was changing my font style by using a tool called ROM Toolbox (by Jrummy). I managed to change my font once and I attempted to change it a second time, since I was looking for something that displayed it wider and bolder. So as I applied install on the new font I got an automatic reboot.
The reboot consisted of the normal LG Logo display, followed by a black screen and staying as a black screen. On the upper left of my phone the notification indicator was flashing multiple colors (red, white, blue etc). This is the current state of my phone, black screen with a multicolor notification.
My attempts to fix:
- Simple reboot of the phone ((fail))
- Let the phones battery drain out then charge for a few minutes and restart ((fail))
- Managed to get into STOCK recovery and perform clean partition ((fail)
- Managed to get into STOCK recovery and apply factory reset ((fail))
- I got into some weird mode which also gave me the option to apply factory reset ((fail))
- I followed this tutorial (LG Flash Tool) on how to revert back to stock (by hyelton) ((fail))
Link to tutorial: http://forum.xda-developers.com/showthread.php?t=2644083
The tutorial by hyelton was almost successful to reverting back to stock firmware until I got to the last step (Number 6). The error that occurred by using the LG Flash Tool was when the tool attempted to flash the stock firmware it gave me a Download FAIL!! “Device Model is different“ notification (Images below). I did this tutorial at least seven times and I got no luck. Every single time that I attempted to do this I kept getting the same notification. I have now ran out if ideas on what to do.
My theory, I believe that by changing my build prop to display as a nexus 5 is the reason why I keep getting this fail notification. On the phone it-self when I put it into download mode it even displays as a Nexus 5 (Images below).
I was wondering since it’s possible to get into STOCK RECOVERY, I saw that it had an option for “ADB SIDELOAD” is it possible to push something thru ADB??? Any type of help is greatly appreciated and thanked. Please do not get upset that you see this in multiple LG threads, I am just trying to find a solution to UNBRICK this very expensive phone that I bought and I cannot afford to just use it as a paper weight. THANK YOU AND GOD BLESS
Here is a Link to all my files regarding STOCK tot,dll,lg flash tools,aboot, buildprop, lg usb drivers and adb drivers that are for my phone
Link: https://drive.google.com/folderview?id=0B1D8UNLjuTB6TWpCQ1pJME5qWk0&usp=sharing
i hope these files help anyone that are attempting to help me put my phone back to stock
Alright yall, I am almost official screwed. I purchased this phone about a month ago from Best Buy and they stated that I am out of there 15 day window so I cannot exchange or replace for the same phone. I then went to Sprint on whom I have phone insurance for and they stated that they cannot do anything and that I have to go to one of their Sprint repair stores. I went to one of the repair stores and the gentlemen that assisted me plugged my phone to his computer and immediately knew that my phone was rooted. So from there I played the dumb blonde card acting like I don’t know what he’s talking about and from there he directed me to call LG and see what they can do. So now the current status is I filed a repair request and now I am awaiting a reply from LG. Does anyone have any suggestion???
**SOLUTION** hey yall i got the solution to my problem and it was simply by downloading this universal custom .dll from
http://forum.xda-developers.com/show....php?t=2663369
and i managed to flash back to stock recovery using this guide. instead using the dll on the the guide i used the custom one.
*GUIDE BACK TO STOCK*
http://forum.xda-developers.com/show....php?t=2644083
BUMP
well not sure about g flex but for my g2 I had same problem when flashing back to stock it kept saying wrong firmware finally I found I downloaded an updated firmware and so did not match error, try downloading and flashing the firmware the phone came with but not updated, in my case my phone came with d80010d and I was trying to flash updated d80010o, downloaded d80010d and all went fine, not sure if it's the same for you I too changed my phone model in build.prop and my phone went into fastboot mode on restart. Hope it saves u too.
Sent from my LG-D800 using xda app-developers app
can you link me to where I can find the dll you are using?
XxZombiePikachu said:
can you link me to where I can find the dll you are using?
Click to expand...
Click to collapse
its the second oneeeeeeee
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex/Stock/Sprint+LS995/
lingarajug said:
well not sure about g flex but for my g2 I had same problem when flashing back to stock it kept saying wrong firmware finally I found I downloaded an updated firmware and so did not match error, try downloading and flashing the firmware the phone came with but not updated, in my case my phone came with d80010d and I was trying to flash updated d80010o, downloaded d80010d and all went fine, not sure if it's the same for you I too changed my phone model in build.prop and my phone went into fastboot mode on restart. Hope it saves u too.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
thanks for your response but unfortunately there is only one firmware for the sprint flex at the current moment.
christiam.coronado said:
its the second oneeeeeeee
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex/Stock/Sprint+LS995/
Click to expand...
Click to collapse
ok then try this modified dll hopefully it will work https://www.dropbox.com/s/akcn2b3skv9h4pa/LGLS995_20140116_LGFLASHv151.dll
please do so at your own risk
XxZombiePikachu said:
ok then try this modified dll hopefully it will work https://www.dropbox.com/s/akcn2b3skv9h4pa/LGLS995_20140116_LGFLASHv151.dll
please do so at your own risk
Click to expand...
Click to collapse
same results "device model is different" didnt work. Im willing to try anything. please shoot me some more of your modifications
christiam.coronado said:
same results "device model is different" didnt work. Im willing to try anything. please shoot me some more of your modifications
Click to expand...
Click to collapse
ill see what else I can try I am basically just trying to find out which are all the parts of the dll that check the device which is kind of difficult especially since yours is no longer a part of the g family ill keep looking when I finish the next one I'll let you know
XxZombiePikachu said:
ill see what else I can try I am basically just trying to find out which are all the parts of the dll that check the device which is kind of difficult especially since yours is no longer a part of the g family ill keep looking when I finish the next one I'll let you know
Click to expand...
Click to collapse
wow thanks i greatly appreciate your help. i am open to trial and error and whatever you can think of i will try.
christiam.coronado said:
wow thanks i greatly appreciate your help. i am open to trial and error and whatever you can think of i will try.
Click to expand...
Click to collapse
what did you add to your build prop to make it think it was a nexus 5?
XxZombiePikachu said:
what did you add to your build prop to make it think it was a nexus 5?
Click to expand...
Click to collapse
all that i did to the build prop was change the model to Nexus 5. luckily i have copied my original build prop to my computer. here is the ling to my google drive which i have saved my original build prop
https://drive.google.com/file/d/0B1D8UNLjuTB6UVBGZnhIaWEwNjg/edit?usp=sharing
XxZombiePikachu said:
what did you add to your build prop to make it think it was a nexus 5?
Click to expand...
Click to collapse
attached below is an image of what my original build prop looked like with its original model as ro.product.model = LG-LS995
the LG-LS995 was the part that i replaced with Nexus 5
Why not try to restore your default build prop
Sent from my LT25i using xda app-developers app
harrymason37 said:
Why not try to restore your default build prop
Sent from my LT25i using xda app-developers app
Click to expand...
Click to collapse
how remember that my bootloader is still locked and this model does not have a custom recovery. but i am able to access the stock recovery with an option to ADB SIDELOAD. I got word from a DEV stating that:
"Factory recovery won't let you adb sideload a package without a LG verified updater script so it won't work." (by XDA justinswidebody)
but if he is incorrect i wouldn't mind attempting trial and error. what do you think???
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
XxZombiePikachu said:
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
Click to expand...
Click to collapse
ok ill try it out give me a minute
XxZombiePikachu said:
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
Click to expand...
Click to collapse
no didnt load onto the lgflashtool. these are the notification that i got, images are below
-Failed to load factory s/w
-Failed PreviousLoad ()
christiam.coronado said:
no didnt load onto the lgflashtool. these are the notification that i got, images are below
-Failed to load factory s/w
-Failed PreviousLoad ()
Click to expand...
Click to collapse
what's the version of your flash tool
edit: after some reading to flash nexus tots you need lg flash tool 1.8
re-edit: I believe that the dll needs to be modified so that it accepts the device as a nexus 5 but once it's done flashing it needs to make the device and ls995 again, but for now it's 1am and I need to be up early later so I'll work on something later, also just some extra information on ther stuff: as for flashing the build prop if you can manage to make it into a flashable update.zip(which also places it in corresponding directory) which is also signed and you can sideload it should flash or just give an error, and another thing that could work with above method is flashing a corrupted kernel which will throw your phone into fastboot mode and with correct files and commands you can repartition the entire device to stock(this one is very dangerous/risky would not recommend it)
XxZombiePikachu said:
what's the version of your flash tool
Click to expand...
Click to collapse
Setup_LGFlashTool_1.6.01.0529
its on my drive should i downgrade??? https://drive.google.com/file/d/0B1D8UNLjuTB6ekthOGRVMWE3ejA/edit?usp=sharing
Hey guys, I've got a huge problem with my LG G2 D802 HK version.
I've never rooted it or instal a custom recovery.
I've flash it with LG Mobile Support Tools from 4.2.2 to 4.4.2 few month ago and it worked fine.
Yesterday, I saw that there is a new update available for my LG, so I just flash it with the same application. It went fine until the end.. The phone boot normaly but there is no touchscreen response at all ! So the phone is just waiting for my PIN code.
When I try to do an hard reset factory (with volume down + power), the phone is stuck in a bootloop.
Since I can put in download mode (volume up + power)
I've tried to flash it with R&D test tool .. Everything went fine again,but the problem is stil there : no touchscreen at all.
I don't know what to do right now.
Thanks for your answers !
HI again, i've tried to flash again with the germany open rom for LG d802. Install went fine again but the problem is still there, touchscreen won't work.
any help would be appreciated =(
couscous06 said:
HI again, i've tried to flash again with the germany open rom for LG d802. Install went fine again but the problem is still there, touchscreen won't work.
any help would be appreciated =(
Click to expand...
Click to collapse
You can try to make a factory reset. If your rom has knock code the button combo is (different combination of prior):
1. Phone must be off
2. Boot phone while pressing and hold POWER and VOL-DOWN
3. When LG logo appear, release all Buttons, wait 1 second, press and hold VOL-DOWN and VOL-UP
---------- Post added at 09:39 PM ---------- Previous post was at 09:25 PM ----------
You can also add a mouse with the micro usb connector (usb otg) and go the hidden menu 3845#*802# and
http://forum.xda-developers.com/showpost.php?p=52394643&postcount=7
Thanks for the advice dude but it didn't work =( It went to factory reset mode, i did it, the phone rebooted and the touchscreen is still not working.
It doesn't make sense to me, i really thought it would work.. don't know if you guys have other tips to help me out
couscous06 said:
Thanks for the advice dude but it didn't work =( It went to factory reset mode, i did it, the phone rebooted and the touchscreen is still not working.
It doesn't make sense to me, i really thought it would work.. don't know if you guys have other tips to help me out
Click to expand...
Click to collapse
Have you tried hidden menu acces with otg usb mouse ?
nop i don't have any micro usb to usb adapter. bad timing my car will be at the garage tomorrow and i'll be at work the whole week end... might order one online =/
If there isn't any other solutions by then i'll keep you posted !
thanks again dude for taking your time to help !
OK, today i was able to use a mouse otg and got into the hidden menu to upgrade touch firmware. nothing happened =/ touchscreen still doesn't work...
back to 4.2.2 but nothing changed, touch screen doesn't work.. hardware issue and pure coincidence?
Hi, i have the same problem, after upgrade from Kitkat to Lollipop via "Pc Suite", the touch screen is crazy.
Downgrade, hard reset, try various rom .kdz, but the problem remaining....
I have same issue
couscous06 said:
Hey guys, I've got a huge problem with my LG G2 D802 HK version.
I've never rooted it or instal a custom recovery.
I've flash it with LG Mobile Support Tools from 4.2.2 to 4.4.2 few month ago and it worked fine.
Yesterday, I saw that there is a new update available for my LG, so I just flash it with the same application. It went fine until the end.. The phone boot normaly but there is no touchscreen response at all ! So the phone is just waiting for my PIN code.
When I try to do an hard reset factory (with volume down + power), the phone is stuck in a bootloop.
Since I can put in download mode (volume up + power)
I've tried to flash it with R&D test tool .. Everything went fine again,but the problem is stil there : no touchscreen at all.
I don't know what to do right now.
Thanks for your answers !
Click to expand...
Click to collapse
I bought this phone refurbished without warranty, I got home i tried to install updates.. using LG flash tool auto update... from server
but after update got installed i could not use touch properly.. it was totally malfunctioning.. I touch at one place but it shows it is touching on other place on screen...
after that i tried to install KDZ using cracked flash tool 2014... i installed 20D but did not work then i installed 10F but it still did not worked.. .
tried updating touch firmware .. nah same issue.... now i want to try rooting and installing custom rom.. but its not rebooting into recovery. at first it booted into recovery but now its not....
Atharstar said:
I bought this phone refurbished without warranty, I got home i tried to install updates.. using LG flash tool auto update... from server
but after update got installed i could not use touch properly.. it was totally malfunctioning.. I touch at one place but it shows it is touching on other place on screen...
after that i tried to install KDZ using cracked flash tool 2014... i installed 20D but did not work then i installed 10F but it still did not worked.. .
tried updating touch firmware .. nah same issue.... now i want to try rooting and installing custom rom.. but its not rebooting into recovery. at first it booted into recovery but now its not....
Click to expand...
Click to collapse
I am 100% sure that you dont have d802 (i have d800 and have same problem, after updating my "d802")
This thread helped me : http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
And this files http://downloads.codefi.re/autoprime/LG/LG_G2/D800/Stock_Firmware/10o_partitions
Good luck
i have same problem i need solution after update firmware kitkat to lollipop touch not work
i downgrade too but condition same touch not working before software updating everything
working fine
refurbished phone
I've the same issue
Did you found any solution?
Same problem with me
100 % same problem with me did you find any solution ?? if yes then please tell me ...
hi help me please
Atharstar said:
I bought this phone refurbished without warranty, I got home i tried to install updates.. using LG flash tool auto update... from server
but after update got installed i could not use touch properly.. it was totally malfunctioning.. I touch at one place but it shows it is touching on other place on screen...
after that i tried to install KDZ using cracked flash tool 2014... i installed 20D but did not work then i installed 10F but it still did not worked.. .
tried updating touch firmware .. nah same issue.... now i want to try rooting and installing custom rom.. but its not rebooting into recovery. at first it booted into recovery but now its not....
Click to expand...
Click to collapse
hi i bought a refurbished lg g2 d800 and flashed a kdz of d802 now the touch screen isnt working and imei is gone to if any body know something please help me
imeicodes said:
i have same problem i need solution after update firmware kitkat to lollipop touch not work
i downgrade too but condition same touch not working before software updating everything
working fine
Click to expand...
Click to collapse
niss17 said:
I've the same issue
Did you found any solution?
Click to expand...
Click to collapse
Tish997 said:
100 % same problem with me did you find any solution ?? if yes then please tell me ...
Click to expand...
Click to collapse
Ammarkhalid1998 said:
hi i bought a refurbished lg g2 d800 and flashed a kdz of d802 now the touch screen isnt working and imei is gone to if any body know something please help me
Click to expand...
Click to collapse
Maybe try this...Ask if you have any problem...Hope that is it will work.. ?
I dont understand what are you saying
Jongla said:
Maybe try this...Ask if you have any problem...Hope that is it will work.. ?
Click to expand...
Click to collapse
Can you help us please i dont understand what are you saying
[Solution]My phone in working fine now !!
I didnt fix it my self but give it to software shop islamabad pakistan and after the fix i figure out my self that first open the back cover and see the model no. (If you have touch issue then 100% your model no. Is not the same you are trying in my case i was flashing d80230d rom but my phones model no. Is d800 and shop owner flash d80020c and now my phone working fine) after checking the model no. Try to flash kdz rom of that version and then see your phone working or not ?? Do let me know
Yep Tish it will work fine,but to flash D800 you have to edit TOT hex which a lot of people find difficult(including me).
Now I found this method which might be longer,but easier then hex edit for sure!
http://forum.xda-developers.com/showpost.php?p=62109415&postcount=1
Warren0577 said:
Hi, i have the same problem, after upgrade from Kitkat to Lollipop via "Pc Suite", the touch screen is crazy.
Downgrade, hard reset, try various rom .kdz, but the problem remaining....
Click to expand...
Click to collapse
I have same problem. Do you find any solution ??
So long story short I screwed my phone up and had to use LG Flash Tool to make it work again. The weird thing is, when I tried to flash a D803 .TOT file the LG Flash Tool said "wrong phone model" or something along those lines. It then said "D801" was my phone model. I searched and searched and SEARCHED for Bell D801 and could only find people saying it's D803. Well, I said screw it and downloaded TMobile's D801 .TOT and flashed it. The phone works now but it has a TMobile boot animation. It still connects to Bell fine, but here's the main issue;
Part of my touchscreen doesn't work anymore and I'm still under warranty if I can just get the phone back to stock to have it sent in. How can I do this? Any help? Also, does flashing with the LG Flash Tool make it so LG can't see I ever rooted the phone?
Thanks!
Maybe its a wind phone? I believe those are d801s because I have a bell one and that is D803
danial.aw said:
Maybe its a wind phone? I believe those are d801s because I have a bell one and that is D803
Click to expand...
Click to collapse
Thanks for the quick reply, but i purchased the phone at a bell store 9 months ago... This makes no sense. I really need Bell stock back...
cptnsmelly said:
Thanks for the quick reply, but i purchased the phone at a bell store 9 months ago... This makes no sense. I really need Bell stock back...
Click to expand...
Click to collapse
Stock rom is KDZ, not TOT
http://lg-phone-firmware.com/firmware-Lg+G2-Tutti-36.html
bell V20G
Funjet said:
Stock rom is KDZ, not TOT
http://lg-phone-firmware.com/firmware-Lg+G2-Tutti-36.html
bell V20G
Click to expand...
Click to collapse
So are you saying there is no TOT? I cant get the kdz method to work... so i need a tot.
Ok so I typed my IMEI into some site and it said my phone is indeed a D803! However, because I flashed a TMobile .TOT to the phone, my phone thinks it's a D801. Oh god... How do I fix this now?
BUMP!
Hmm I'm not sure how you can go back but if you are within warranty you can try wrecking the system (so it doesn't work) and send it in for repair... They will reinstall a new version
Maybe your bootloader or whut was d801?? Idk but can you try to flash this kdz http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Canada+D803/
Then the one from bell? I hope its gonna be alright if you can flash it. Note that if you screw up with flashing then try not to wreck your system but try to repair it you itself since a system wreckage doesn't come fromself and lg doesnt need to pay the price to fix it. Even under warranty. I know lg screws up stuff but flashing is at own risk.
Edit: I sawmyour other thread so nvm.
Alright so I redownloaded LG Flash Tool and everything and I put my phone in download mode. It starts updating my firmware, it gets to 49% and then fails and says "TYPE_WPARAM_UPGRADE_ERROR" in the log. What does this mean and how do I fix it? I think when I flashed the TMobile .TOT it made my Bell phone think it is TMobile and maybe that's why I'm getting this error. How do I fix my phone and make it realize it's D803?
cptnsmelly said:
Alright so I redownloaded LG Flash Tool and everything and I put my phone in download mode. It starts updating my firmware, it gets to 49% and then fails and says "TYPE_WPARAM_UPGRADE_ERROR" in the log. What does this mean and how do I fix it? I think when I flashed the TMobile .TOT it made my Bell phone think it is TMobile and maybe that's why I'm getting this error. How do I fix my phone and make it realize it's D803?
Click to expand...
Click to collapse
Change your windows language and locals like unicode to english if it wasn't
Turn off or allow the app through your antivirus.
Reinstall LG USB Driver, LG Flash Tool etc
Change the LG device in Device manager to COM port 41 or COM port 4 before connecting to PC.
See or your KDz weights around 2gb and not less then it cause that would be maybe a sign of an corrupted KDZ.
The last thing what i also think is that the Lg flash tool maybe reads the D801 in the build.prop or what and as safety measure it cuts off the flashing progress so you might change the D801 to D803 or however it was called in Bell.
Hope that one of these things could solve your problem.
wulsic said:
Change your windows language and locals like unicode to english if it wasn't
Turn off or allow the app through your antivirus.
Reinstall LG USB Driver, LG Flash Tool etc
Change the LG device in Device manager to COM port 41 or COM port 4 before connecting to PC.
See or your KDz weights around 2gb and not less then it cause that would be maybe a sign of an corrupted KDZ.
The last thing what i also think is that the Lg flash tool maybe reads the D801 in the build.prop or what and as safety measure it cuts off the flashing progress so you might change the D801 to D803 or however it was called in Bell.
Hope that one of these things could solve your problem.
Click to expand...
Click to collapse
Thanks for the info, but how do I change the build prop? I tried the adb usb thing and I get "device closed"
Woohoo! I fixed the bi*ch! Sorry, I'm a little excited here... Anyway, I followed the instructions above and it worked. I think the above is well written and easy to understand except for one thing: How to change build number (if you're like me and flashed the wrong TOT).
It's simple. Make sure you have a rooted phone and download root explorer (black icon with a little android face). Next, follow this: http://forum.xda-developers.com/showthread.php?t=1948558
Make sure you change the model number before you try flashing the kdz only if you messed up with tot flashing like me. Otherwise, as mentioned above, make sure you're on COM41. This worked great. Now I can take my bell phone back to the store and have it seen to (I have a hardware issue with the screen no sensing touch in certain areas).
cptnsmelly said:
Woohoo! I fixed the bi*ch! Sorry, I'm a little excited here... Anyway, I followed the instructions above and it worked. I think the above is well written and easy to understand except for one thing: How to change build number (if you're like me and flashed the wrong TOT).
It's simple. Make sure you have a rooted phone and download root explorer (black icon with a little android face). Next, follow this: http://forum.xda-developers.com/showthread.php?t=1948558
Make sure you change the model number before you try flashing the kdz only if you messed up with tot flashing like me. Otherwise, as mentioned above, make sure you're on COM41. This worked great. Now I can take my bell phone back to the store and have it seen to (I have a hardware issue with the screen no sensing touch in certain areas).
Click to expand...
Click to collapse
Great to hear that it worked yes about that build.prop editing i wasn't clear sorry for that but good that it worked now.
My friend bought a new LG G2 and wanted a custom rom. He tried to flash a custom recovery tool through fastboot but did not unlocked the bootloader. After this the phone booted up in recovery and showed a couple of error messages. He reflashed all of the partitions of the phone and restarted it, put the official firmware but to his surprise his touchscreen was a mess, everything he clicked on was offset by 50 to 200 pixels, and its all scrambled up. He tried flashing custom roms, official roms but is the same, even in TWRP the same problem with the LCD panel. Now the phone has SlimKat and I could activate the feedback of the touches, it's incredible, I can't understand it.
Can someone tell me where the driver for the touch is, or what to repair in order the have the screen control back. I have uploaded some images of the touches feedback.
He tried to use LG official tool or flash the kdz file?
pirikitto said:
He tried to use LG official tool or flash the kdz file?
Click to expand...
Click to collapse
Yep, he and I flashed I bunch of times the official rom but nothing changed. I think it has something to do with the boot are aboot partition, there is where the kernel is booted up and there is our problem, but I need someone more good at the low level arhitecture to guide me through. I repeat the same problem hapens when you go in to recovery.
Try 3845#*802# with dialer, go to setting, UPDATE TOUCH FIRMWARE
pirikitto said:
Try 3845#*802# with dialer, go to setting, UPDATE TOUCH FIRMWARE
Click to expand...
Click to collapse
I will test this tomorrow, I will get a OTG cable to connect a mouse, it's a nightmare treeing to navigate like this. This code will run on every ROM, or only on official rom... I will come with feedback on this, thanks for all your support...
I know that work on stock for sure, I don't know on AOSP
I forgot to tell you that the final part of code "802" is your G2 model
Es. If have a 801 model the code is 3845#*801#
pirikitto said:
I know that work on stock for sure, I don't know on AOSP
I forgot to tell you that the final part of code "802" is your G2 model
Es. If have a 801 model the code is 3845#*801#
Click to expand...
Click to collapse
I noticed a nother problem, the radio of the device is off and cant connect to the network, in conclusion when I try the code the phone gives a message to turn off the airplane mode. I will try to reinstall the official ROM.
Dangelo23 said:
I noticed a nother problem, the radio of the device is off and cant connect to the network, in conclusion when I try the code the phone gives a message to turn off the airplane mode. I will try to reinstall the official ROM.
Click to expand...
Click to collapse
No luck, still the same problem. Any other ideas guys, I really cant stand it.
Did you try the touch calibration setting? It may or may not help.
abhinav.tella said:
Did you try the touch calibration setting? It may or may not help.
Click to expand...
Click to collapse
Where are exactly these calibration settings?
Ignore that, Ive gotten it confused with another phone, G2 only has motion calibration in main settings, I just checked mine.
Up
Does anyone has an idea what my caused this. Please I really want to fix the problem.
Real help will not be ignored!!!
Question regarding model
Ok, I found something very weird, at this point I really dont know if the phone is a g2 D802 or D800. I've taken the back cover of the phone and found that on the back is a d800, the back cover of the phone states that is a d802, but when I check the imei using a website imei info it says its a d800. The D800 is for AT&T and the D802 is the international one, what is going on here...I am confused...
I smell something fishy as well. Perhaps the phone has been opened before and the rear cover was replaced. Make sure you are usuing the D800 firmware and modem baseband firmware.
Flash both of those and see what happens!
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Meppolan said:
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Click to expand...
Click to collapse
Thanx
The phone was sold as NEW and not Refr.
It was in Genuine box, with Genuine Chrager (and even manual)
Though it might be fraud...
I talked to the seller, and i am sending it back to him
Hopefully he will fix it/replace it
If not i will send him you link..
I think i'm having exactly the same problem with you T_T
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
[email protected] said:
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
Click to expand...
Click to collapse
You can flash with the TOT, you just need to edit the TOT file in a Hex editor and change the model to what you have (LS980). Look at my post here on how to do that.