Related
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
TEDET123 said:
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
Click to expand...
Click to collapse
use flashtool with another *dll
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
bender_007 said:
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
Click to expand...
Click to collapse
thanks for replying guys..appreciate it!
yes..download mode is not functional.
When connect to pc at 'Factory hard reset mode' screen (vol- and pwr pressed, letgo and pressed)..nothing happens on either PC or Mobile..
After Hard reset, phone continue stuck at LG LOGO.. PC detected mobile as "LGE AndroidNet USB Serial Port (COM41)", see attached.
I have tried the method in the link above but the PC seems cannot detect phone during cmd "ls /dev/sd*" and "gdisk -l /dev/sdb" .
someone please help..
TEDET123 said:
someone please help..
Click to expand...
Click to collapse
Hey,
I'm currently having some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
shark_max said:
Hey,
I'm currently have some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
Click to expand...
Click to collapse
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
the screenshot stays forever (trying to get into download mode) and did not enter the actual download screen.
if continue to boot, the phone will just hang at LG Logo.
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
LG Support tool was unable to detect my phone..
patriky said:
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
Click to expand...
Click to collapse
I did this but phone just stays at the 2nd screenshot...
before it was bricked, I have no problem get it into download mode with vol+ and usb cable.
TEDET123 said:
LG Support tool was unable to detect my phone..
Click to expand...
Click to collapse
Wait so what can you do? Hard reset? Download mode? Nothing?
Can you plug your phone and check that your phone is not detected in device manager?
All the drivers are installed?
Same issue
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
I would try to force the phone into qhsusb mode then flash only laf.img,aboot.img and boot.img
In qhsub mode you should be able to see the SDB partition
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
FaseehUllah said:
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
Click to expand...
Click to collapse
Same problem.
Same problem
now can i go back to fast boot mode?
someone please help..
Same problem, please helpp
Same Problem ...... flashing unknown rom and now stuck on LG logo and not entering to download mode please help !! Experts ??
hello all, im a noob and think my phone is good enough to throw in the garbage. you tell me!!
so i use my vs980 on tmobiles network and only get at best hspa so i tried to throw a tmobile stock rom on my vs980 to try and get 4g ive seen people doing it i was hesitant but did it anyway. i had a zip for a verizon kernel now the rom installed successfully but the kernel didnt i meant to try to restore a backup but accidentally hit reboot and now every time i power on my phone i get black screen
fastboot mode started
reset
portchange
reset
portchange
fastboot processing commands
cant get into twrp with two button combo cant do a factory reset, infact that has changed looks a bit different than it used to, assuming its a tmobile factory reset screen
i tried to do the kdz and tot method to return to stock aswell phones not recognized for either method
i installed ubuntu on virtual box to try and push recovery.img, laf.img, aboot.img. boot.img. etc but phones not recognized in terminals fastboot says <waiting for device> any way to get ubuntu to recognize my device? any special drivers i need?
ive searched high and low for a solution im so exausted and could really use some veterans help please help this noob out... thanks in advance for any help from you guys!!
anyone?
pete022682 said:
hello all, im a noob and think my phone is good enough to throw in the garbage. you tell me!!
so i use my vs980 on tmobiles network and only get at best hspa so i tried to throw a tmobile stock rom on my vs980 to try and get 4g ive seen people doing it i was hesitant but did it anyway. i had a zip for a verizon kernel now the rom installed successfully but the kernel didnt i meant to try to restore a backup but accidentally hit reboot and now every time i power on my phone i get black screen
fastboot mode started
reset
portchange
reset
portchange
fastboot processing commands
cant get into twrp with two button combo cant do a factory reset, infact that has changed looks a bit different than it used to, assuming its a tmobile factory reset screen
i tried to do the kdz and tot method to return to stock aswell phones not recognized for either method
i installed ubuntu on virtual box to try and push recovery.img, laf.img, aboot.img. boot.img. etc but phones not recognized in terminals fastboot says <waiting for device> any way to get ubuntu to recognize my device? any special drivers i need?
ive searched high and low for a solution im so exausted and could really use some veterans help please help this noob out... thanks in advance for any help from you guys!!
Click to expand...
Click to collapse
thats not even close to a hard brick it is in bootloader mode do not let it die keep it plugged in because if the battery dies then you have a real big problem im not sure what to do after this but i know you dont want the battery to die
well that's reassuring
Keeping phone plugged in. Now if I can get some tips as to why I cant get it to communicate with ubuntu in this bootloader mode to push the files I need. Any help anyone? Please. Where I go from here?
link - windows
Tried putting laf.IMG in your script folder bender it brought cmd to<waiting for device> my comp won't communicate with my phone for some reason. Am I missing any special drivers?
pete022682 said:
Tried putting laf.IMG in your script folder bender it brought cmd to<waiting for device> my comp won't communicate with my phone for some reason. Am I missing any special drivers?
Click to expand...
Click to collapse
Just install lg drivers - if it doesn't work then download adb drivers..
+please see the device manager for new devices and "not installed drivers"
+ look here
I will try when I get home thanks for your help so far at work no computer access. Thanks again bender I will let you know how everything goes.
bender_007 said:
Just install lg drivers - if it doesn't work then download adb drivers..
+please see the device manager for new devices and "not installed drivers"
+ look here
Click to expand...
Click to collapse
if you manage to install the driver the rest should go easy.
It's weird, on some systems it wont install the driver properly(adb) but google nexus driver installs fine.
i was hoping so
bender_007 said:
if you manage to install the driver the rest should go easy.
It's weird, on some systems it wont install the driver properly(adb) but google nexus driver installs fine.
Click to expand...
Click to collapse
so this is where were at bender....
got drivers installed, phone is being recognized...
pushed laf.img with your script...GOT DOWNLOAD MODE BACK!!yes, progress...
went to factory restore with .TOT method.....FAILED
shows PID#, IMEI#, MODEL,D801 DLL VS980 SBUV Xdabbeb's vs98024a 1.1.1 11 SWOV Xdabbeb's vs98024a 1.1.1 11 device doesn't match
ideally i would love to just turn this vs980 into a d801 stock kitkat by pushing all nessassary d801 files would that work what would be my options here?
How do i fastboot flash open recovery twrp IMG?
Ultra brick G2 vs980! T_T
Good night lords of XDA!
I come to you after exhausting all that I could find and try, hope you can enlighten me, you would save a new G2 that is about to become a gleaming brick:
Summary: I have in hand a Verizon LG G2 vs980, with the intention of using it in Spain. After a bad flash a ROM for a different model, you could not access recovery mode or download mode, only fastboot.
Thanks to this great tutorial, I could flash by ADB and fastboot files an official ROM for this G2, but after a correct process, the G2 restarted and only shows "Security error" before shutting ...
I still do not have access to recovery or download, and now not to fastboot. Only allows me to access the screen "Factory reset", but in doing nothing changes.
How could re-flash a recovery or something like that allows me relive my G2?
Thank you very much in advance. You are my salvation. XD
PS: I apologize for any clerical error or misused term. I do not usually write in English.
Click to expand...
Click to collapse
Sorry, wrong thread. XDD
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Briked my lg g2 d802
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Acolis said:
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Click to expand...
Click to collapse
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Faddy132 said:
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Click to expand...
Click to collapse
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
MosesTheTool said:
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Click to expand...
Click to collapse
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Acolis said:
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Click to expand...
Click to collapse
No it doesn't, i have ADB, i know how to use it, i already saved one D800 that was in Fastboot.
Problem is, i used the debrick method, i succeeded, but now the device is recognized as LG but the screen stays black. It's acting a bit weird, it flashes with LG FLASH TOOL, although i believe it's not even in Download mode, but the screen keeps staying black.
Stuck at logo
janmynar said:
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
Click to expand...
Click to collapse
still stuck at logo flashing same version kdz twice and thrice result is same.. i think i jz RIP my phone.. I have lg g2 D802 international variant if you have any other solution to wake my phone so tell me bro.. its makes me so frustrated..
my phone LG G2 D802 International Version was running perfectly fine i tried to flash another rom by LG FlashTOOL and in the first i got soft bricked on that fastboot screen i recoverd it by ADB (fastboot.exe)
fastboot erase recovery
fastboot erase laf
fastboot flash laf laf.img
and then i tried to reflash it then i got this mesg on screen
---------------------------------------------------------------------------
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
-------------------------------------------------------------------------
Board Info
Rev. : 1.1 speed.pvs : 1.1 Serial : 01e862cf934fc622
Please Help me somebody ... i cant afford to buy new phone i just bought this phone a week ago ..
Having same issue ! XDA forum experts always helped me with every situation with my phones. Expecting help this time as well from you experts.
Same here, enyone can help, i stuck with the sam message, presing vol- just rebots, and vol+ sends message "jump to download mode" but i cant flash stock firmware
i have the same problem any help ??
I have the same issue too, can anyone help?
I heard that this can help you guys. Use the search option there and try to fix it. Actually i had the same problem few months ago, but for me mew motherboard was the solution... If you're device is under warranty send it saying it failed while taking OTA. Good luck...
lg g2 critical error
I have done a flash to my g2 32gb d802 and it suddenly entered into critical error not going into any of thefastboot mode or download mode even though it is giving me options.....please any one help me out to get my phone back to normal ........
PM me if you guys need help.
I had the exactly same problem, and I had to go to afterservice center to repair. Engineer told he would wipe everything and install new rom. but He failed to write rom so he simply changed mainboard.
At first I had thought about open my g2 and makes it go into qualcomm download mode by short-circuit.
the reason I didn't was my warranty was still available.
I tried every method to make it boot into recovery or download mode but I failed. In my opinion, you may try short-circuit method for last solution. In this situation, even linux doesn't mount rom's storage section. Only if you can make G2 recognized in Linux, G2 will revive.
good luck.
xmayhemreturnsx said:
PM me if you guys need help.
Click to expand...
Click to collapse
i still don't know what to do HELP
yassou92 said:
i still don't know what to do HELP
Click to expand...
Click to collapse
The best way to go if you do not have a warranty is to short circuit the board and get into Qualcomm ... 9006 mode. However, when you get the demigod error plug in you usb and click up and it should start download mode even though it doesn't show it.
xmayhemreturnsx said:
The best way to go if you do not have a warranty is to short circuit the board and get into Qualcomm ... 9006 mode. .
Click to expand...
Click to collapse
How do you short the pins? There's a guide here on xda but it's so difficult to undestand. I need to know how can I short the pins.
it should start download mode even though it doesn't show it.
Click to expand...
Click to collapse
No, it doesn't. I try to use flashtool but it doesn't recognize the phone. No download mode in any method I tried
I got into this error after I had previously recovered into qhs_usb9006_bulk mode from a hard bricked D801, by shorting the capacitors on the main board. After entering qhs_usb9006, I used srk tools 2.1 for my phone, and after they finished, I tried entering download mode, only to get into this error. I really don't know what it is to say about this. Everything turned wrong with this phone, it went from simply failing a .kdz, to stock .tot, to hard brick, and now to this error, whereas it should've just enter the download mode, as for the 99,99% of the others. Any help would be really appreciated. Thanks.
L.E. I shorted the capacitors again (the one i the middle, like I did the first time, when i got into 9006 mode. 5000 and 5004 didn't work for some reason). This time I got into dload mode, which is 9008. I'll try to recover the phone from here, with this method:
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
i had this problem while trying to return to stock. Fixed it by following this guide http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 . it needs some hardware tampering though. i tried and tried but i cant flash the phone any other way. the way i understand this is due to bootloader being corrupt.
I installed autorec from playstore solved all the problems
Than you! autorec worked for me too
Can someone post a KK baseband for D801 (T-Mobile)? I'm on D80120a software version with unknown IMEI and baseband (the phone is a D801 refurbished into D802, I more than hardbricked it by flashing wrong .kdz, got it recovered through shorting pins, 9008 mode, got download mode, D80120a stock, root, twrp, after a very long and painful process of about 1 month). Now I have to make use of QPST, but I have to obtain a valid baseband first. Of all links I've stumbled upon, only 5% or less of them are still working, so I only have one flashable modem, in twrp recovery, which corresponds to D801 jb version.
http://downloads.codefi.re/autoprime/LG/LG_G2/G2_modems
cloudyfa kk_baseband_D801 only make my phone restarts like crazy.
I'm simply stuck and pray for some devine help.
Thank you.
Weird enough, I flashed a canadian modem and I got both baseband and IMEI. Why did I do that in the first place? Because I remembered that before all these things happened to my phone, the baseband was M8974A-AAAANAZM-1.0.190082, which corresponds to D803. So I said to myself what can happen by flashing the wrong modem? Boot loop, easily fixable with the phone in it's current state. But again, after 1 month of trouble with the phone, I'm back to what exactly started it in the first place: phone seem to work OK but it has 2 huge problems: WiFi extremely weak (2 meters away and a wall or 5 meters away and no wall a and I lose the signal in both cases; the 2nd is wit the GPS - 20-30 meters error). No idea how should I adapt the radio to Europe region (by keeping the canadian one and change the settings, if it's even possible/fixable this way or if this even does make any sense).
I had to do a hard brick fix to get it into the QSUSB mode to flash TOT.
Have you tried using LG Support tool to put it back to stock?
Sent from my LG-F350K using XDA Free mobile app
Hi All you very clever people.
This is my first post, have been watching from the shadows for a long time on xda, but have finally met my match and have to ask for help!
I had the (I believe) HK version of lollipop 5.0.1 KDZ that was 'leaked' a while back (possibly the first LP one out?), liked it for the most part but wanted to go back to KK. Tried to flash via KDZ again the KK KDZ. Unknowingly I tried using a USB3.0 socket and it didn't work. I then unplugged the cable from the computer and plugged it into a USB2.0, still didn't work a few times.
Foolishly I thought, 'I know, I'll reset the phone and try again!'. This then stopped me form getting into download mode!!!
I can still get to recovery fine but resetting just gets me back to a black screen. I am getting the 9006 error of bulk usb mode or something. I have tried SRKtools and still cant get to download mode? Is my best bet finding the corresponding .img files for that rom and flashing them in ubuntu?
On that note, does anyone have a link for that KDZ image by any chance. Can't find mine on my computer anymore (again foolishly probably thought, 'won't need that any more, phone is working!').
Also wondering if this has erased the rom on there of if it is just related to boot? It won't boot into the rom at all just black screen after LG logo?
Any help will be greatly appreciated! :good: :good:
Cheers
Oz
There : lg-phone-firmware_dot_com/firmware-Lg+G2-Tutti-36_dot_html
KitKats are 20x, I think. But you should know that as you already tried to flash one.
Sorry I'm new so I can't post plain links.
Give us some info about your phone please