Just went to the new 4.4.4 stable for D800 (g2), and screen will not rotate, flashed KK modem, which fixed the problems on the 4.4.2 build, but no luck this time. On the positive side, LG quickset remote still works great
settings?
Did you check Settings --> Display --> Rotation?
Related
Hey guys, I'm having a problem with my N4 Auto-Focusing in videos. The sensor works in camera mode (Both tap to focus and automatic) but in video, it doesn't do anything at all. It sticks to the focused state it was in Camera mode and doesn't change. Flash works, everything works, but that. Problem persisted in many ROMS, PA Didn't let me auto focus at all, only touch and currently I'm on Carbon's latest beta ROM (Note: I used his stable release too, still didn't fix) paired with Morfic's Trinity TF110 kernel. Clocks @ 384/1512mhz & an additional -62.5mv UV (Stable) Non-UV still has this bug present. I don't know what's wrong, please help. Thanks
Detailed said:
Hey guys, I'm having a problem with my N4 Auto-Focusing in videos. The sensor works in camera mode (Both tap to focus and automatic) but in video, it doesn't do anything at all. It sticks to the focused state it was in Camera mode and doesn't change. Flash works, everything works, but that. Problem persisted in many ROMS, PA Didn't let me auto focus at all, only touch and currently I'm on Carbon's latest beta ROM (Note: I used his stable release too, still didn't fix) paired with Morfic's Trinity TF110 kernel. Clocks @ 384/1512mhz & an additional -62.5mv UV (Stable) Non-UV still has this bug present. I don't know what's wrong, please help. Thanks
Click to expand...
Click to collapse
You're using a 4.2.2 ROM with a 4.2.1 radio. The only fix is to upgrade the radio. (I think the new one's version ends in ".48".)
fenstre said:
You're using a 4.2.2 ROM with a 4.2.1 radio. The only fix is to upgrade the radio. (I think the new one's version ends in ".48".)
Click to expand...
Click to collapse
Oohhh thanks very much. I will go ahead and try that tomorrow Again, thanks for helping a newbie out xD
Detailed said:
Hey guys, I'm having a problem with my N4 Auto-Focusing in videos. The sensor works in camera mode (Both tap to focus and automatic) but in video, it doesn't do anything at all. It sticks to the focused state it was in Camera mode and doesn't change. Flash works, everything works, but that. Problem persisted in many ROMS, PA Didn't let me auto focus at all, only touch and currently I'm on Carbon's latest beta ROM (Note: I used his stable release too, still didn't fix) paired with Morfic's Trinity TF110 kernel. Clocks @ 384/1512mhz & an additional -62.5mv UV (Stable) Non-UV still has this bug present. I don't know what's wrong, please help. Thanks
Click to expand...
Click to collapse
Tap to focus isn;t available in Video Mode. However, is it possible to achieve that through some software tweak or an App.?
[Case history]
I've been using CM11 for quite a while and one day I messed up. I installed a Kernel that wasn't compatible with CM11 and I couldn't boot the phone. So I used ADB to push a CM11 ROM and flashed it using TWRP and it was fine...until...
I found that all my sensors were not working....well not all, but 'all'. Please let me explain.
I noticed that Rotation doesn't work anymore; I noticed that Auto Brightness would not work anymore; I also notice Accelometer wouldn't work.
So I downloaded the app 'Phone Tester', and I went to the 'Sensor' section and there was nothing detected there! No sensors at all.
However, I have this cover for my phone and when I cover the phone the screen will go out --> I assumed that means the proximity sensor works? I also noticed that the screen will blackout when I am on a phone call.
[My question]
I searched a bit and had two speculations.
1.) Baseband/Modem problem? --> I tried flashing the KK Modem for D802 and it didn't fix the problem
2.) Kernel problem? --> I think this is quite possible...but didn't flashing the ROM = flashing in a Kernel?
Any help is appreciated!
If I were you I would flash it back to stock and see if they work then
sent from my T-Mobile LG-VS980
herman925 said:
[Case history]
I've been using CM11 for quite a while and one day I messed up. I installed a Kernel that wasn't compatible with CM11 and I couldn't boot the phone. So I used ADB to push a CM11 ROM and flashed it using TWRP and it was fine...until...
I found that all my sensors were not working....well not all, but 'all'. Please let me explain.
I noticed that Rotation doesn't work anymore; I noticed that Auto Brightness would not work anymore; I also notice Accelometer wouldn't work.
So I downloaded the app 'Phone Tester', and I went to the 'Sensor' section and there was nothing detected there! No sensors at all.
However, I have this cover for my phone and when I cover the phone the screen will go out --> I assumed that means the proximity sensor works? I also noticed that the screen will blackout when I am on a phone call.
[My question]
I searched a bit and had two speculations.
1.) Baseband/Modem problem? --> I tried flashing the KK Modem for D802 and it didn't fix the problem
2.) Kernel problem? --> I think this is quite possible...but didn't flashing the ROM = flashing in a Kernel?
Any help is appreciated!
Click to expand...
Click to collapse
it is a baseband issue, as you know cm has not incorporated the lg kk changes which means that the kk baseband would not work you have to flash the d802 jb baseband and you will get sensors working again
XxZombiePikachu said:
it is a baseband issue, as you know cm has not incorporated the lg kk changes which means that the kk baseband would not work you have to flash the d802 jb baseband and you will get sensors working again
Click to expand...
Click to collapse
Thanks! I flashed the JB Baseband and it actually worked!
Hi,
Since build 5.10 rotation and light sensor are broken eventough I flashed the latest kk modded modem from this website. I would like to know if someone with a D800 and SlimKat over 5.10 have those two things working.If someone could post this in the SlimKat thread in development section which I cant as it needs more than 10 posts I would be thankful.
Thanks
Software forced rotation works but automatic rotation doesnt, its the position senser thats not working.
Maybe he has moved to new sources have you tried flashing stock kitkat modem at all as this is the obvious choice to me?!
Ok, I flashed the modded kk modem from xda thread from 4 april made to fix rotation and it didnt work. Now guess what? I did what you said and flashed original LG modem found somewhere in the 20 spet 2013 thread and everything worked! I wonder which one is newer.
Thanks!
Glad you're sorted. The stock kit Kat one is newer the modded one is just recently modded not created.
Sent from my LG-D802 using Tapatalk
With my Nexus 10 running ThunderKat 4.4.4, I recently discovered in Settings - Display that there is a Cast Screen button. When clicked I can connect to my Chromecast and whalla, my Nexus 10's screen is up on my TV!
Is this a unique feature to the Thunderkat ROM or is this pretty much in all custom KK ROMs? Maybe just in CM based ROMs?
My Verizon LG G2 is on stock-based Malladus' 4.2.2 ROM, ver 1.2.4 and I'd can't do this, but would love to. What has to happen? (I've searched the LG forums without luck, can someone point me in the right direction?)
@gbeardmore the function is unique inncyanogenmod roms probably also cherry picked but stock roms dont have it. But I believe you can also do it on stock with chromecast, https://support.google.com/chromecast/answer/6059461?hl=en g2 is one fro the couple supported devices.
Its not implenented in settings on stock.
It's available on LG stock firmware, tested on my D800
> 4.2.2
Go to 4.4.2 and you'll be able to cast.
Hello everybody,
I have a Galaxy S5 (G900F) running on CM13 6.0.1. My problem is that wheter the auto rotation, nor the auto screen brightness works at all. I already had the same problem on CM12.1, I don't know exactly when it happened, so I can't tell if the issue originated due to an update. However, all of the sensors except the thermal sensors are not working. In CPU-Z You can only see the thermal sensors that are fine, the other sensors are blank. I already did factory resets, installed an older backup (not exactly sure if it was still working there), I only didn't install a complete new (stock) rom. I just went from CM12.1 to CM13.
Thanks in advance and happy holidays to You guys
]
im having the same issue.mine started when i flashed marshmallow.so im gasing its a software issue.