Hey guys
If you're here, I assume you've read the following thread. If you haven't, please do so immediately
http://forum.xda-developers.com/showthread.php?t=1987950
As mentioned in the other thread, this is the consolidated thread for all non-Blade ZTE manufactured devices. Feel free to post any related question. Hope y'all get appropriate responses reasonably quick
Regards
QuantumFoam
Asus TF300T | ZTE Blade
How to install Adreno graphic drivers on Blade3?
Hello,
I just bought ZTE Blade 3, low-budget smartphone. Successfully rooted with famous ICS method by Bin4ry from this forum. There are no recoveries and roms . My only problem is how to install Adreno 2xx graphic drivers for armv7 device from Qualcomm site? To enter stock recovery I use Volume up+Power and after splash screen press Back button. There are options for upgrading, but after file verification zip didn't install, it's intended for ICS upgrades only. I send e-mail to ZTE but no answer so far. Drivers are Adreno 2xx User-mode Android ICS Graphics Driver (ARMv7)) with name Adreno200-AU_LINUX_ANDROID_ICS_CHOCO_CS.04.00.03.06.001.zip. from developer Qualcomm site, section tools and resorces.
Please help, I assume that must be done with some adb commands but I dont know how...
holocen said:
Hello,
I just bought ZTE Blade 3, low-budget smartphone. Successfully rooted with famous ICS method by Bin4ry from this forum. There are no recoveries and roms . My only problem is how to install Adreno 2xx graphic drivers for armv7 device from Qualcomm site? To enter stock recovery I use Volume up+Power and after splash screen press Back button. There are options for upgrading, but after file verification zip didn't install, it's intended for ICS upgrades only. I send e-mail to ZTE but no answer so far. Drivers are Adreno 2xx User-mode Android ICS Graphics Driver (ARMv7)) with name Adreno200-AU_LINUX_ANDROID_ICS_CHOCO_CS.04.00.03.06.001.zip. from developer Qualcomm site, section tools and resorces.
Please help, I assume that must be done with some adb commands but I dont know how...
Click to expand...
Click to collapse
You cannot download the drivers from the Qualcomm site and expect them to work universally. They have to be individually modded for each device by a developer, then flashed
Asus TF300T | ZTE Blade
Clockworkmode for Blade 3 ICS
Recommend me Clockworkmode for Blade 3 ICS? Can anything work without modding?
holocen said:
Recommend me Clockworkmode for Blade 3 ICS? Can anything work without modding?
Click to expand...
Click to collapse
I don't know about the CWM project for the Blade 3
And yes. Some software like Beats Audio can be flashed universally without Modding
Asus TF300T | ZTE Blade
[Q] ZTE V6500 Etisalat smartphone (nova 3.5) rooting
--------------------------------------------------------------------------------
dear all ,
i just bought the ZTE nova 3.5 known as etisalat smart phone here in egypt ...
i tried to root it in every way possible with no use ... kindly if fellow developers can help us through the rooting process .. it would be of a great pleasure to alot of egyptians here .... thanks in advance .... i am willing to try whatever it is to succsesfully root this phone
Mustapha.Soliman said:
[Q] ZTE V6500 Etisalat smartphone (nova 3.5) rooting
--------------------------------------------------------------------------------
dear all ,
i just bought the ZTE nova 3.5 known as etisalat smart phone here in egypt ...
i tried to root it in every way possible with no use ... kindly if fellow developers can help us through the rooting process .. it would be of a great pleasure to alot of egyptians here .... thanks in advance .... i am willing to try whatever it is to succsesfully root this phone
Click to expand...
Click to collapse
What all did you try
Asus TF300T | ZTE Blade
Root for ZTE Nova
Mustafa, this is solution for your problem:
http://forum.xda-developers.com/showthread.php?t=1886460
Your android is ICS, why do you want ROM?
holocen
Root for ZTE Nova
Mustafa, this is solution for your problem:
http://forum.xda-developers.com/show....php?t=1886460
Your android is ICS, why do you want ROM?
16TH NOVEMBER 2012 11:34 PM
QuantumFoam
Quote:
Originally Posted by Mustapha.Soliman
[Q] ZTE V6500 Etisalat smartphone (nova 3.5) rooting
--------------------------------------------------------------------------------
dear all ,
i just bought the ZTE nova 3.5 known as etisalat smart phone here in egypt ...
i tried to root it in every way possible with no use ... kindly if fellow developers can help us through the rooting process .. it would be of a great pleasure to alot of egyptians here .... thanks in advance .... i am willing to try whatever it is to succsesfully root this phone
What all did you try
Click to expand...
Click to collapse
dear all ,
first of all this mobile runs on android 2.3.6 (GB) not (ICS)
i have tried doom lord (zergrush ) , superone click , z4root , unlock root
i have tried some manual commands
all with no use , if any body can help please
thanks in advance
Gingerbread root
Sorry, my mistake, try this:
http://forum.xda-developers.com/showthread.php?t=1697248
holocen
Gingerbread root
Sorry, my mistake, try this:
http://forum.xda-developers.com/show....php?t=1697248
Click to expand...
Click to collapse
didnt work also ... attached a print screen of the process ... thanks in advance
it rebooted twice .. and thats a good step .. because all other roots the phone didnt respond at all ...
but when i checked .. the phone was not rooted also
i tried it and didn't work
can anybody help please
How to root and flash coustom ROM for ZTE X876
Hi everybody,
Could anyone help me how to root and flash custom rom for ZTE X876 .my current system is 2.1 and NOT ROOTED.
I try to root it with z4,universal androot, unlock root, super one click,unluckily not successful.
I want to root and flash custom for my ZTE X876.Plz someone point me out to the right direction.
Thanks
hi tharpu try this site i think u will find what u want h
ttp://code.google.com/p/zte-x876-roms/downloads/list
ZTE BLade 2
So, last I bought me a ZTE Blade 2. I am very happy with this phone, and it is my first android phone. I tried to root my phone with a guide on the modaco forums. After trying a few times, it worked perfectly. This was also the first time I rooted a smartphone. Then I wanted to flash a new rom, because someone told me it was a great rom (cm9 or something like that. I googled it and found a rom for the "ZTE Blade 2". I tried to flash the rom, but it failed. Now my homebutton doesn't work anymore and I can't receive phone calls, but I can call other persons.
By googeling what was wrong I found out that the rom was for the ZTE crescent/ San Fransico II. It seems that the Crescent is also reffered as the blade 2 since it is the succesor of the san fransico I. In the beginning I was confused, butr now I know these 2 phones are completely diffrent.
After I found the problem why the rom would not flash, I want searching for a solution. Seems I could repair my ZTE by installing a stock rom. I can't find a stock rom and poeple tell me there is no rom availabe for the Blade 2, not even on the ZTE site itself. I also found that I could repair it by flashing my back up. but while i was formatting my phone in the CWM recovery I also formatted my SD card, so I lost my back up to. Now my question is, can I install someone elses back up file? and if that is possible, would someone who ownes this phone be so kind to give me a back up? If there are other solutions, I would like to know, every idea is welcome!
I bought my phone in Belgium in BASE store.
Kind regards challengere.
Thanks in advance!
Has there been any root for the ZTE engage? The phone is fairly new, and i tried searching everywhere and failed to find any possible root. please and thank you.
Can someone make tutorial about rooting and backup for ZTE Blade 3?
Look here...
http://zteblade3.webs.com/
Hi everyone,
i have two questions...
i have a zte racer and i'm currently using the universal androot app to root it, but it is a temporary root, is there any way i can root permanently my racer?
other question: i'm planing to buy a ZTE skate acqua (dubbed as TMN smart a15 here in Portugal) is it good? my main worry is the screen response, is it responsive?
Ok , I sold my blade and moved on . But I have a lot of old ROMs and other stuffs with me that are currently rare to find due to the ban of file hosts in the recent past .
ZTE_BLADE_DUMP
Credit mostly goes to the developers at modaco,XDA and few to me
LeWa_OS , LiGux, etc. which don't have much active links on the forums are present here .
PS: The *driver.exe file is not downloading giving security issues .. am trying to fix it but cant find a way if someone knows then please PM.
Moving to general section
sent from my time-machine-HD2 Xylo's PACman-JB nativeSD rom
Hi there
there has been a problem with touch screen drivers in i9100g on android version following ICS i.e JB and KK
the problem is stated briefly in this thread http://forum.xda-developers.com/showthread.php?t=2147306
some none developers GOOD guys managed to find a solution buy updating the touch screen drivers from an update provided by sumsung here http://opensource.samsung.com/ the updated driver is named (GT-I9100G_CHN_JB_Opensource_Update1)
so they replaced the buged drivers with the new one and build a kernel which worked on cm10.2 and cm11 and stock 4.1.2 but the problem is that this fix is not official .. i mean it is not updated in sources of official cm 10 or cm 11
i am a noob in development so if any one can update the official cm kernel i will be very glad
NB this problem is not in all i9100g devices
So why post here??, :banghead:
Hi fox i,m new to this forum actually this forum it,s really very helpful guiding forum for beginners and resolving issue related to hardware or operating.
I just want your help for some inquires and doubts that i had if u don't mind i don't know if its the right thread or no.........
I have Samsung SM -A500h
Android V : 4.4.4
Baseband v : A500hxxu1aob1
kernel V : 3.10.28 - 4197997
B Number : ktu84o.a500hxxu1aoc1
This all the info reg my phone and its rooted
All i want to inq about is..... stable stock-like Android
which V of CWM is compatible with my device coz i want to install Cyanogen Mod 11 and gapps-kk
so if u can guide me step be step what 2do so i can do it right way and provide me the source to download correct files
img coz i found many on the forums and others site and i was misguided so plz req yur asst XDA.
Secondly want to ask what it mean SE for android status enforcing when u press about device icon it appear after build number.
Thanks.
HI guys
I asked Que still i didn't get any answer till now no replays if any one can help pls......................
there is an unofficial TWRP for the A5 (i didn't worked for me).
from there... you are stuck. There is no custom firmware yet
Hello everyone in Coolpad community. I m in bit of trouble guys help me out here,
Basically
I want a custom rom for note 3 ( MT6753) which supports
Both VOLTE nd FP (Fingerprint) .
On searching I found out 1 room named MIUI MIX which supports both these feature but links are dead. For (MT6753) for lite they are present
So if anyone can forward that link it will be great.
Also I wanna know your guys suggestion which custom rom I should use which have both these feature at least i don't have problem with camera bug. So please guy help me out there
Do comment
Thanks.
I am also searching for that for last 3 months but I didn't find one